INSTRUCTIANUAL
25cc
Petro
Trimm
• Melbourne • Perth • Auckland
T25
• Taipei • New York • Verona • London • Pari
ED14 BR
Code: GLT25
Date: 051125
Black
Cyan
Magenta
Yellow
Edition: 14
Op: BR
Download from Www.Somanuals.com. All Manuals Search And Download.
Conforms to relevant standards for
electromagnetic compatibility.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Dear Customer
If you require any help with your product, whether it
is a Warranty claim, spare part or user information,
please phone our Help Line for an immediate response.
Phone 1300 880 001 in Australia or 0800 445 721 in
New Zealand.
Wear safety footwear.
Wear safety gloves.
Introduction
Your new GMC power tool will more than satisfy your
expectations. It has been manufactured under stringent
GMC Quality Standards to meet superior performance
criteria.
Warning.
Read these instructions for use carefully.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years of
dependable service.
CAUTION. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Choke control
Start position (choke open).
Run position (choke closed).
Use at a distance of at least 15m from
other people.
Thrown objects and rotating line can cause
severe injury. Do not operate the unit without
the safety guard in place. Keep away from
rotating cutter.
Environmental protection
Recycle unwanted materials instead of
disposing of them as waste. All tools, hoses
and packaging should be sorted, taken to
the local recycling centre and disposed of
in an environmentally safe way.
Sharp blade on the safety guard, do not touch
the cut off knife.
Explosive material.
Extremely hot surface. Do not touch a hot
muffler, gear box or cylinder, you may get
burned. These parts get extremely hot from
operation and remain hot for a short time after
the unit is turned off.
Description of symbols
The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Personal safety
Specifications
Engine:
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under the
influence of drugs, alcohol, or medication. A moment of
inattention while operating power tools may result
in serious personal injury.
• Use safety equipment. Always wear eye protection.
Safety equipment such as a dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
25cc, 2 stroke
-1
Speed:
7000-8500min
Cutting diameter (swathe): 400mm
Line thickness:
Spool type:
Fuel tank capacity:
Fuel type:
Fuel mixture:
Sound pressure values:
Equivalent spark plugs:
2mm
Bump feed, twin line
600ml
Unleaded
Unleaded: oil (40:1)
111 dB(A)
• Remove any adjusting key or wrench before turning
the tool on. A wrench or a key that is left attached
to a rotating part of the power tool may result in
personal injury.
NGK BPMR7A
CHAMPION CJ7Y
Net Weight:
5.3kg
• Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool
in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
• If devices are provided for the connection of dust
extraction and collection facilities ensure that these
are connected and properly used. Use of these devices
can reduce dust-related hazards.
Safety instructions
WARNING. Read and understand all instructions. Failure
to follow all instructions listed below may result in electric
shock, fire and/or serious injury. The term “power tool”
in all of the warnings below refers to your mains-operated
(corded) power tool or battery-operated (cordless)
power tool.
Save these instructions
Work area
• Keep work area clean and well lit. Cluttered and dark
areas invite accidents.
Power tool use and care
• Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks which
may ignite the dust or fumes.
• Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was
designed.
• Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
• Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
sunlight, high ambient temperature and damp, wet or
high humidity conditions.
• Do not smoke while refuelling. This is potentially
dangerous as it may ignite the fuel and cause an
explosion.
• Take care not to spill fuel. When refuelling the line
trimmer ensure that the motor has been switched off.
Prevent the spilling of fuel as this may also ignite with
the hot motor. Never refuel whilst the engine running.
• Be careful where you store the line trimmer. Store
the line trimmer in a dry area away from flammable
liquids.
• Turn tool off completely before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk
of starting the power tool accidentally.
•
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. Use of the power tool
for operations different from intended could result in a
hazardous situation.
• Keep your distance. The line trimmer emits exhaust
fumes. Ensure bystanders keep a safe distance.
• Ensure you use oil-mix fuel. Ensure that you mix
40 parts unleaded fuel to 1 part 2-stroke oil. If not,
the engine will overheat and cause damage to your
line trimmer.
• Never fill fuel tank indoors. Never fill fuel tank when
engine is running or hot. Do not smoke when filling
fuel tank.
Unpacking
Due to modern mass production techniques, it is unlikely
that your petrol line trimmer is faulty or that a part is
missing. If you find anything wrong, do not operate the
tool until the parts have been replaced or the fault has
been rectified. Failure to do so could result in serious
personal injury.
Service
• Have your power tool serviced by a qualified repair
personnel using only identical replacement parts.
This will ensure that the safety of the power tool
is maintained.
Contents of carton
Additional safety rules for petrol line
• Handle, upper and lower with attaching bolt and nut
• Secondary handle with attaching bolt and nut
• Safety guard with attaching bolt and wing nut
• Spool removal spanner
trimmers
• Do not operate in a hazardous location. Such areas
include where there is a risk of explosion of petrol
fumes, leaking gas or explosive dust.
• Do not operate in a confined area. Exhaust gases,
smoke or fumes could reach dangerous concentrations.
• Spark plug wrench
• Carry strap
• Instruction manual
• Protect your tool. This line trimmer is NOT
WEATHERPROOF and should not be exposed to direct
5
Download from Www.Somanuals.com. All Manuals Search And Download.
14
7
Know your product
1. Cutting line spool and assembly
2. Cut off knife
11
12
10
3. Safety guard
4. Secondary handle
5a. Handle upper
5b. Handle lower
6. Ignition switch
7. Fuel tank
9
13
6
8
8. Throttle lever
9. Recoil starter
4
10. Primer
11. Spark plug
12. Filter cover
13. Safety lever
5a
14. Choke lever
15. Spool removal spanner
16. Spark plug wrench
19
15
16
5b
17. Carry strap
18. Bump knob
19. Handle locking knob
17
2
3
1
6
18
Download from Www.Somanuals.com. All Manuals Search And Download.
4.Push the safety guard (3) over the end of the shaft
and align the holes in the front of the guard with the
slots in the bracket on the shaft.
Assembly
It is necessary to fit the safety guard (3), join the
handles (5a & 5b) and fit the secondary handle (4).
Joining the handles
4
5
1.Insert the lower section of the handle (5b) into the
upper section (5a) lining up the hole in the upper
handle with the pin in the lower handle.
1
2
5.Insert the bolt and secure with the washer and nut
provided.
Fitting the secondary handle
2
3
1.Loosen and remove the bolt
and washer on the secondary
handle.
2.Tighten the shaft locking knob to secure it in place.
Installing the safety guard
2.Fit the secondary handle
over the upper section of
the handle and adjust it so
it is the most comfortable
position.
(18) Bump
Guard front
knob
locking plate
(1) Cutting
line and spool
assembly
Rotation
3.Tighten the secondary handle
nut and bolt locking it firmly
into place.
(3) Safety
guard
(2) Cut
off knife
1.To fit the safety guard (3) you
have to remove the cutting line
and spool assembly (1).
2.Hold the spool assembly and
use the spool removal spanner
(15) provided to loosen the
the bump knob.
2
Fitting the cutting line and
2
spool assembly
1.Ensure that the cutting lines
are correctly threaded through
the holes in the spool cover.
3.Remove the bump knob,
cutting line and spool assembly
from the spindle.
2.Push the spool and line
assembly onto the spindle.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3.Make sure that the hexagonal
recess on the spool is fully
located on the hexagonal
section on the spindle.
4.Secure the spool and line
assembly by screwing the
bump knob onto the end of
the spindle.
WARNING. Never use steel threads and/or three teeth
blade other than those provided by the manufacturer.
Always use tools in perfect condition, free of damage.
WARNING. In high-speed rotation, parts could be projected
at very high speed and could involve serious injury and
damages to persons and property.
4
Fueling
5.Tighten the bump knob using
the spanner provided.
MOTOR FUEL: MIX AT 40:1 ONLY
1. Use fresh unleaded petrol. You must use 2-stroke oil
specifically made for heavily stressed two-stroke engines.
2.Mix the petrol and oil in an approved container.
Never mix fuel directly in the line trimmer fuel tank.
3.Place the line trimmer upright on the ground or on
a sturdy bench and wipe any debris from around the
fuel cap.
Replacement of the cutting line
1.Stop the engine.
2.Put the petrol line trimmer on the floor in a way that
cutting line and spool assembly (1) is facing up.
3.Open the cutting line and
spool assembly (1) by using
the spool removal spanner
(15) twisting the bump knob
anti-clockwise.
4.Pull the bump knob out of the
spool head and remove the
remaining cutting line.
3
4.Unscrew the fuel tank cap and pour the mixture into the
tank with the aid of a funnel.
4a
4b
5.Cut the new line, Ø2mm
and 6 metres long in two
equal lengths. Make a loop
folded at each end of the two
nylon threads (already cut)
and insert into one of the
slots provided in the centre of
the spool and wrap the line
firmly clockwise.
6.Introduce each end of the line to the eyelets in the
spool holder. The line should stick out 150mm each side.
7.Screw the bump knob back on the shaft firmly.
CAUTION. After changing the line spool, run the petrol line
trimmer under no load for at least a minute to make sure
that the line and the tool are both operating correctly. Use
only the line spool as recommended by the manufacturer.
5
5.Be careful not to spill any mixture. If this happens, wipe
the spill with a clean rag.
6.Start the engine at least three metres away from the area
where the fuel tank has been filled up in order to avoid
any risk of fire.
• Always use extreme care when handling fuel! Fuel is
highly flammable.
• Never attempt to fuel the line trimmer if the fuel system
components are damaged or are leaking.
• Never attempt the refuel the engine while it is running
or still warm, allow it to cool before fueling.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
• Never smoke or light any fires near the line trimmer
or fuels.
3. Push the primer bulb 6 times, until the primer bulb fills
with fuel/oil mixture.
• Always transport and store fuels in an approved
container.
3
4
• Never place flammable material close the the
engine muffler.
• Never operate the line trimmer without a properly
functioning muffler and spark plug cover installed.
• Never operate the line trimmer unless it is properly
assembled and in good working condition.
• Do not use petrol which contains ethanol or methanol as
it may damage the fuel lines and other engine parts.
4. Squeeze the safety lever (13) and the throttle trigger
(8).
• Mix only enough fuel for your immediate needs. Do not
store pre mixed fuel.
5. Pull the recoil starter until you
hear the engine starting.
5
Starting the line trimmer
Choke control
6. Allow the engine to run idle
for around 10 seconds to let it
warm up.
7. Push the choke lever approx-
imately half way down and let
go of the throttle trigger.
Start position (choke open).
Run position (choke closed).
1. Move the ignition switch (6) to the ‘on’ position
marked with a I.
8. Once the engine is fully warm push the choke down fully
to the run position (warm start).
8. To engage the cutting line squeeze the safety lever (13)
and throttle trigger (8).
1
2
Stopping the line trimmer
WARNING. The spool and line will continue to rotate for
a few seconds after the engine has stopped.
1. Release the throttle trigger (8)
2
and allow the engine
to idle for a few moments.
2. Move the choke lever (14) upwards to the start position
(cold start).
NOTE. This is not required if the engine is already warm.
2. Move the ignition switch (6)
to the off position
marked STOP.
3. The engine will now stop.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Each time the head is bumped it releases approximately
2cm of line. The cut off knife (2) on the blade guard will
automatically cut off any excess line. For best results tap
the head on hard soil or bare ground.
Do not hit stones (even small ones), piles of earth, and
small pieces of wood or anything else that could be
hidden or poorly visible in the grass. If you hit a large
object by accident, or if you block the cutting tool due to
overloading or having the cutter jammed with grass, you
must stop the engine.
NOTE. All protective devices of the machine as well
as protective equipment must be maintained in good
operation condition during the period of use.
WARNING. The engine of the petrol line trimmer must be
at a complete stop during assembling, repair and cleaning
operations that could be necessary.
Petrol line trimmer transmit vibrations to the operator
during use. These vibrations can generate increased
fatigue. For this reason, we recommend taking regular
breaks during work. We also recommend taking a break
after a few hours of work to rest the engine. If abnormal
noise or vibration occurs during operation, turn the line
trimmer off immediately and have the problem corrected.
Running in the engine
1. During the first ten hours of work, run the engine at a
moderate RPM.
2. We advise you in any case not to maintain your engine at
a high speed as the different components must settle with
each other during the process of running in the engine.
3. It is at the end of the running in period that the engine
will reach its maximum power.
4. After the first two hours of work, stop and make sure
that all nuts and screws are securely fastened, and
tighten them if necessary.
Use of the petrol line trimmer
This petrol line trimmer is only made to cut grass, small
bushes, and shrubs.
• Always use the shoulder strap, when using the tool to
avoid serious personal injury.
• Perform a few accelerations of the motor without
reaching maximum speed and without working to make
sure that everything is in good working order.
• Start the engine only when you are close to the
working area.
• Place yourself in a well balanced position, stable on
both feet.
Maintenance
Air filter
Grass cutting
Accumulated dust in the air filter will reduce engine
efficiency. Increase fuel consumption and allow abrasive
particles to pass into the engine. Remove the air filter as
often as necessary to maintain a clean condition.
• Remove filter cover (12) by
pressing in the sides and
lifting it off.
• Light surface dust can readily
be removed by tapping
the filter.
Cut the grass like you are in a corridor about 1.5m wide.
Move step by step, moving the machine from left to right
and vice-versa. Make sure at each step that you are still
well balanced on your feet.
The line trimmer has a bump feed mechanism which
releases line without having to stop the engine. To release
additional line lightly tap the cutting line and spool
assembly (1) on the ground while operating the unit at
high speed.
NOTE. Always keep the trimming line fully extended. Line
release becomes more difficult as the cutting line becomes
shorter.
• Heavy deposits should be
washed out in suitable
detergent.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
• Squeese out the remaining water an allow the filter to
completely dry.
• Add a drop of thin oil to the filter and replace it.
Fuel Filter
• Fuel tank (7) is fitted with a
filter.
• Filter is situated at the free
end of fuel pipe and can be
picked out through fuel port
with a piece of hooked wire or
the like.
3.Clean and adjust the spark plug gap to 0.6 - 0.7mm.
Replace any damaged or visibly worn plug with a
TORCH L8RTC or equivalent spark plug, as listed in the
specifications table.
4.Install the spark plug finger tight in the cylinder head,
then tighten it firmly with the spark plug wrench.
Servicing
• It is recommended once you first use your petrol line
trimmer to get it serviced after 15 hours of use.
• From thereafter, service the petrol line trimmer every
2 years.
• Check the fuel filter
Storage and maintenance after use
• When you finish working, clean the petrol line trimmer
completely, making sure there is no grass or dirt
wrapped in the cutting tools, and put it back into its
package in order to avoid its hurting you or other people
during transport.
• Be aware to not hit or cut the fuel tank (7) while
you put it onto the ground. Do not let the petrol line
trimmer fall down to the floor or it may damage the
machine.
periodically. Do not allow dust
to enter the fuel tank. Clogged filter will cause difficulty
when starting engine or abnormalities in engine
performance.
• When the filter is dirty, replace the filter.
• When the inside of the fuel tank is dirty, it can be
cleaned by rinsing the tank out with petrol.
Checking the spark plug
Check the spark plug every 10-15 hours of use.
1.Remove the spark plug cover.
• Store the petrol line trimmer away from direct sunlight.
• Do not store in a nylon bag as this can encourage the
formation of mould.
• At the end of the season, give the petrol line trimmer an
overall cleaning and a thorough check.
2
2
• Do not leave the petrol line trimmer resting on the floor
for extended periods as it could cause the shape of the
guard to alter, posing a safety risk. Hang it off the floor
by the top handgrip.
Whenever the machine is not used for a long period of
time, proceed as follows:
• Empty the fuel tank completely.
• Protect all metal engine parts from corrosion by coating
them with oil.
2.Use the spark plug wrench
to remove the spark plug,
by turning it counter-
clockwise.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
• Remove the spark plug, put a few drops of oil into the
cylinder and then pull the recoil starter 2 to 3 times in
order to distribute the oil evenly. Replace the spark plug.
Problems
Power loss or sudden stopping of the engine
• Check whether the fuel tank is empty.
• The mixture does not reach the carburettor. Clean the
fuel filter in the fuel tank.
• There is water in the mixture. Drain and rinse all the
fuel system.
• The air filter is dirty. Clean the air filter.
• There are carbon deposits in the cylinder exhaust pipe or
the muffler. Clean those or change the muffler.
Bad quality cut
• Overloaded cutting due to too high grass or too thick for
engine power.
• Wrapped vegetal material on the cutting tool.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Carefully read the entire Instruction Manual
before using this product.
With continuing product development changes may
have occurred which render the product received
slightly different to that shown in this instruction
manual. The manufacturer reserves the right to
Before returning this product for a
Warranty Claim or any other reason
Please Call 1300 880 001 (Australia)
or 0800 445 721 (New Zealand)
change specifications without notice. Note:
Specifications may differ from country to country.
When you make your call, please have
the following information at hand:
• GMC Product Type • GMC Product Code
A GMC Service Engineer will take your call and, in
most cases, will be able to solve your problem over
the phone.
The GMC 777 Helpline operates from 7am to
7pm, 7 days a week (EST). This allows you
to contact GMC directly with any queries and
technical questions you have regarding
our products.
You are welcome to use this phone-in service to
make suggestions or give comments about any
GMC product.
45–55 South Centre Road
Melbourne Airport
Victoria, Australia 3045
Tel: (03) 8346 1100 Fax: (03) 8346 1200
Save this Manual for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
|