INSTRUCTION MANUAL
500W
460mm Hedge Trimmer
• Melbourne • Perth • Auckland • Hong Kong • Shanghai
MX460
• Taipei • New York • Verona • London • Paris
BHT500
040513 MX460 ED06 PR
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of symbols
Dear Customer
The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
If you require any help with your product, whether it
is a Warranty claim, spare part or user information,
please phone our Help Line for an immediate response.
Phone 1300 880 001 in Australia or 0800 445 721 in
New Zealand.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Introduction
Double insulated
for additional protection.
Your new GMC power tool will more than satisfy your
expectations. It has been manufactured under stringent
GMC Quality Standards to meet superior performance
criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years of
dependable service.
Conforms to relevant standards for
electromagnetic compatibility.
Use at a distance of at least
5m from other people.
Caution. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Specifications
Motor Capacity:
Nominal voltage:
Blade Length:
Branch Cutting Capacity:
Speed:
500W
230–240Vac ~ 50Hz
460mm
14mm
1400 min-
1
Weight:
3.5Kg
Environmental protection
Recycle unwanted materials instead of
disposing of them as waste. All tools, hoses
and packaging should be sorted, taken to
the local recycling centre and disposed of
in an environmentally safe way.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Personal safety
Safety instructions
• Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the influence
of drugs, alcohol, or medication. A moment of
inattention while operating power tools may result
in serious personal injury.
WARNING. Read and understand all instructions. Failure
to follow all instructions listed below may result in electric
shock, fire and/or serious injury. The term “power tool”
in all of the warnings below refers to your mains-operated
(corded) power tool or battery-operated (cordless)
power tool.
• Use safety equipment. Always wear eye protection.
Safety equipment such as a dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
• Avoid accidental starting. Ensure the switch is in the
off-position before plugging in. Carrying power tools
with your finger on the switch or plugging in power
tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning
the tool on. A wrench or a key that is left attached
to a rotating part of the power tool may result in
personal injury.
Save these instructions
Work area
• Keep work area clean and well lit. Cluttered and dark
areas invite accidents.
• Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases, or
dust. Power tools create sparks which may ignite the
dust or fumes.
• Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
• Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is
earthed or grounded.
• Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool
in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
• If devices are provided for the connection of dust
extraction and collection facilities ensure that these are
connected and properly used. Use of these devices can
reduce dust-related hazards.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
• Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an
outdoor extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
Power tool use and care
• Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was
designed.
• Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
• Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Additional safety rules for hedge trimmers
• Do not use the trimmer in the rain.
• If cordset is cut or damaged remove it emmediately
from the power point.
• Keep hands and fingers well away from the blade.
• Wear work gloves, eye protection, solid shoes and
trousers when using this hedge trimmer.
• Always grasp both handles when operating the unit.
• Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
• Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions and
the work to be performed. Use of the power tool for
operations different from intended could result in a
hazardous situation.
• Disconnect the trimmer from the mains supply when
you have finished work, before cleaning or if you have
been interrupted.
• This trimmer has been designed to cut soft, new
growth and should not be used on branches, hard
wood or other forms of cutting.
• Do not attempt to free a jammed blade before first
switching off the machine and disconnecting it from the
mains supply
• If you are interrupted when operating the trimmer,
complete the process and switch off before looking up.
• Never allow untrained users or children to use
the trimmer.
Wear goggles
Wear ear defenders
Wear a breathing mask
Service
• Have your power tool serviced by a qualified repair
personnel using only identical replacement parts.
This will ensure that the safety of the power tool
is maintained.
Unpacking
Due to modern mass production techniques, it is unlikely
that your power tool is faulty or that a part is missing.
If you find anything wrong, do not operate the tool
until the parts have been replaced or the fault has been
rectified. Failure to do so could result in serious
personal injury.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Know your product
Before using the trimmer, familiarise yourself with
all the operating features and safety requirements.
This trimmer is to be used for trimming soft, new
growth only. Use the tool and accessories only for
the applications intended. All other applications
are expressly ruled out.
1. Rear handle trigger switch
2. Front handle bar switch
1
3
2
4
6
7
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Cable safety clip
Switching on and off
This Hedge Trimmer is fitted with two safety interlocked
switch levers for safety.
1. To switch on, press both the rear handle trigger
switch(1) and the front handle bar switch (2) at the
same time.
Locate the rectangular slot
in the lower part of the rear
handle and the position of
the moulded hook. Form a
loop in the extention cord and
insert the loop through the
rectangular slot. Twist the loop
through 1800 and hook the
loop over the moulded hook,
pull tight to secure the cable.
Safety features
1. The lower blade teeth have extended points with
rounded ends to reduce the chance of injury in case of
accidental contact.
2. The rear handle trigger switch (1) and front handle
bar switch (2) must be operated together to start the
motor. This ensures that both hands are used to control
the trimmer.
2. To stop the Hedge Trimmer move the Hedge Trimmer
away from the cutting area and release either one of
the switches.
3. If either of the two switches is released, the trimmer
will stop instantly.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the hedge trimmer
Cutting
WARNING. Do not use the hedge trimmer in the rain or
store the hedge trimmer in wet conditions.
1. Assume a secure position,
using two hands to
hold the trimmer and
switch on.
WARNING. If cordset is cut or damaged remove it
emmediately from the power point.
2. Trim both sides of the
hedge, starting at the
bottom. This prevents
cuttings falling into the
area yet to be cut.
3. Pass the blade lightly through the surface of the hedge.
Do not attempt to cut too deep.
This product requires the use of two hands to ensure
safe operation.
Inspect the area to be cut before starting. Remove any
objects or debris that could be thrown, jammed or
become entangled in the blades.
Adopt a stable stance always keeping the Hedge Trimmer
in front of your body. Grip the front handle bar switch
with one hand. With the other hand grip the rear handle
and with your fingers squeeze the trigger switch.
Allow the cutting blades to reach full speed before
commencing the cut.
4. Trim the top of the hedge.
5. For older hedges that require cutting back substantially,
use pruning shears to cut the thicker branches and
then finish the job with the hedge trimmer.
WARNING. Do not let the blade come into contact with
fencing wire or any other object that could damage it.
When cutting always move in a forward direction and
never backwards, you could fall over unseen obstacles.
Never work towards people or solid objects such as walls,
trees or vehicles etc.
If during cutting the blade stalls, stop the Hedge Trimmer
immediately and disconnect it from the mains supply
before investigating the cause.
Remove any jammed debris from the blades and examine
them for any damage before re-commencing cutting.
Always replace any damaged blades.
Pruning
Your hedge trimmer is
versatile. It can also be used
for trimming back new growth
from small shrubs onto the
driveway or into the garden.
Lubrication
WARNING. Always ensure that the trimmer is switched
off and the plug is removed from the power point before
making any adjustments.
1. After each use, clean the blades and lightly lubricate
with general purpose oil or spray lubricant.
Shaping
1. Trim a hedge so that it is wider
at the bottom than the top.
2. This improves light
penetration and promotes
healthy growth.
3. Narrow the hedge
approximately 100mm for
every metre in height.
4. A bush can be round or
column shaped.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Storage
Make sure that all nuts, bolts and screws are tight and
that the guard is fitted correctly.
All damaged and worn parts should be replaced in order to
maintain the Hedge Trimmer in a safe working condition.
Keep the tool’s air vents unclogged and clean at
all times. Remove dust and dirt regularly. Cleaning is best
done with compressed air or a rag. Never use caustic
agents to clean plastic parts.
CAUTION. Do not use cleaning agents to clean the plastic
parts of the tool. A mild detergent on a damp cloth is
recommended. Water must never come into contact with
the tool.
Special care should be taken when cleaning and adjusting
the blades. This should only be done with the Hedge
Trimmer switched off and disconnected from the mains
supply to prevent injury.
The Hedge Trimmer should always be stored with the
protective blade cover fitted and secured in place.
Store the tool, instruction manual and accessories in a
secure, dry place.
Ensure that the cable and any extension cable used are
checked for damage and are coiled correctly without kinks.
Power Cord Maintenance
If the supply cord needs replacing, the task must be
carried out by the manufacturer, the manufacturer’s
agent, or an authorised service centre in order to avoid
a safety hazard.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Carefully read the entire Instruction Manual
before using this product.
With continuing product development changes may
have occurred which render the product received
slightly different to that shown in this instruction
manual. The manufacturer reserves the right to
Before returning this product for a
Warranty Claim or any other reason
Please Call 1300 880 001 (Australia)
or 0800 445 721 (New Zealand)
change specifications without notice. Note:
Specifications may differ from country to country.
When you make your call, please have
the following information at hand:
• GMC Product Type • GMC Product Code
A GMC Service Engineer will take your call and, in
most cases, will be able to solve your problem over
the phone.
The GMC 777 Helpline operates from 7am to
7pm, 7 days a week (EST). This allows you
to contact GMC directly with any queries and
technical questions you have regarding
our products.
You are welcome to use this phone-in service to
make suggestions or give comments about any
GMC product.
45–55 South Centre Road
Melbourne Airport
Victoria, Australia 3045
Tel: (03) 8346 1100 Fax: (03) 8346 1200
Save this Manual for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
|