INSTRUCTION MANUAL
710W
Drywall Screwgun
• Melbourne • Perth • Auckland • Hong Kong • Shanghai
DSSCR
• Taipei • New York • Verona • London • Paris
050825 ED9 JJ
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of symbols
Dear Customer
The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
If you require any help with your product, whether it
is a Warranty claim, spare part or user information,
please phone our Help Line for an immediate response.
Phone 1300 880 001 in Australia or 0800 445 721 in
New Zealand.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Introduction
Double insulated
for additional protection.
Your new GMC power tool will more than satisfy your
expectations. It has been manufactured under stringent
GMC Quality Standards to meet superior performance
criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years of
dependable service.
CAUTION. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Conforms to relevant standards for
electromagnetic compatibility.
Specifications
Voltage:
Power rating:
No load speed:
Shank size:
Sound pressure value:
Net weight:
230/240V ~ 50Hz
710W
0–4000min-1
6.35mm (1/4”)Hex
87.3 dB(A)
2kg
Environmental protection
Recycle unwanted materials instead of
disposing of them as waste. All tools, hoses
and packaging should be sorted, taken to
the local recycling centre and disposed of
in an environmentally safe way.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
• When operating a power tool outdoors, use an
outdoor extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
Safety instructions
WARNING. Read and understand all instructions. Failure to
follow all instructions listed below may result in electric
shock, fire and/or serious injury. The term “power tool” in
all of the warnings below refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
Personal safety
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under the
influence of drugs, alcohol, or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
• Use safety equipment. Always wear eye protection.
Safety equipment such as a dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
Save these instructions
Work area
• Keep work area clean and well lit. Cluttered and dark
areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks which
may ignite the dust or fumes.
• Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
• Avoid accidental starting. Ensure the switch is in the
off-position before plugging in. Carrying power tools
with your finger on the switch or plugging in power
tools that have the switch on invites accidents.
Electrical safety
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
• Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
• Remove any adjusting key or wrench before turning
the tool on. A wrench or a key that is left attached to
a rotating part of the power tool may result in
personal injury.
• Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool
in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
• If devices are provided for the connection of dust
extraction and collection facilities ensure that these
are connected and properly used. Use of these devices
can reduce dust-related hazards.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Power tool use and care
Service
• Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it
was designed.
• Have your power tool serviced by a qualified repair
personnel using only identical replacement parts.
This will ensure that the safety of the power tool
is maintained.
• Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
• Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
• Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
Additional safety rules for screwguns
• Remove the plug from the socket before carrying out
any adjustment, servicing or maintenance.
• Fully unwind cable drum extensions to avoid potential
overheating.
• When an extension cable is required, you must ensure
it has the right ampere rating for your power tool and
is in a safe electrical condition.
• Ensure your mains supply voltage is the same as your
tool rating plate voltage.
• Your tool is double insulated for additional protection
against a possible electrical insulation failure within
the tool.
• Always check walls, floors and ceilings to avoid hidden
power cables and pipes.
• After long working periods external metal parts and
accessories could be hot.
• Do not put pressure on the screwgun, such that it slows
the motor down. Allow the screwgun bit to cut without
pressure. You will get better results and you will be
taking better care of your tool.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. Use of the power tool
for operations different from intended could result in a
hazardous situation.
• Always switch off before you put the screwgun down.
• Before operating, check that there is sufficient
clearance for the screw under the workpiece.
• Only use accessory bits in good condition.
• Rags, cloths, cord, string and the like should never
be left around the work area.
• If possible, always use clamps or a vice to hold
your work.
• Ensure that the lighting is adequate.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
• Keep the area free of tripping hazards.
• Do not let anyone under 18 years operate this tool.
• Do not touch the bit after operation. It will be very hot.
• Keep your hands away from under the workpiece.
Contents of carton
The drywall screwdriver is supplied with the
following accessories
• Magnetic bit holder 6.35mm (1/4”)
• Instruction manual
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Know your product
1. Nose piece
2. Depth adjustment collar
3. Magnetic hex shank bit holder
4. Hex nut
5. Belt clip
6. Lock-on button
7. Variable speed trigger switch
8. Speed control
9. Forward/reverse switch
10. Bit holder extension
5
4
1
2
9
8
7
10
3
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Unpacking
Fitting a 1/4” shank bit
1/4” Shank bits and bit holder
extensions such as the one
supplied as an accessory can
be fitted into the magnetic hex
shank bit holder (3) located
inside the nose piece (1). The
magnetic hex shank bit holder
makes it easier and quicker to fit
screw driving bits.
When removing screws and other
fasteners, make sure that the
depth adjustment collar (2)
is pulled all the way forwards
towards the nose piece (1) and
that forward/reverse switch (9) is
positioned on the left-hand side
of the tool (as viewed from the
rear).
Due to modern mass production techniques, it is unlikely
that your GMC Power Tool is faulty or that a part is
missing. If you find anything wrong, do not operate the
tool until the parts have been replaced or the fault has
been rectified. Failure to do so could result in serious
personal injury.
Adjusting the driving depths
The depth to which a screw is driven into the wall or other
surface can be accurately set to suit the type of screw and
the material being fastened.
The driving depth is adjusted with
the depth adjustment collar (2).
1.Pull the depth adjustment
collar forward towards the
nose piece (1) as far as it
will go.
2.To increase the driving depth
rotate the depth adjustment
collar in a clockwise direction
(viewed from the rear).
3.To decrease the driving depth
rotate the depth adjustment
collar in an anti-clockwise
direction (viewed from the
rear).
Switching on and off
1.To switch the tool on, squeeze
the variable speed trigger switch
(7).
2.The more pressure exerted on
the switch the faster the motor
will turn.
3.Releasing the trigger switch
stops the motor.
CAUTION. Always maintain tight control of the tool when
switching on and off and remember that the motor will
continue to turn for a short while after switching off.
4.When the driving depth has
been correctly adjusted pull
the depth adjustment collar backwards the rear of the
tool until it touches the large hex nut (4) on the front
of the tool housing.
NOTE. It may be necessary to drive a number of screws
into a test piece of material to establish the ideal driving
depth adjustment.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Direction of rotation
The direction of motor rotation
is controlled by the forward/
reverse switch (9).
1.The bit rotates in a clockwise
direction (viewed from the
rear) when the forward/reverse
switch is set to the right-hand
side of the tool. This is the
position required for driving
screws and other fasteners.
Speed selection
The speed at which the motor turns when the trigger switch
is fully depressed depends on the setting of the speed control
(8).
It is important to select the correct speed to suit the task. If
necessary, trial the tool at different speeds to determine the
optimum setting, start the trial at the slowest speed.
1.Rotate the speed control in
a clockwise direction (viewed
from the rear) to increase the
speed.
2.The bit rotates in an anti-
clockwise direction (viewed
from the rear) when the
forward/reverse switch is set to
the left-hand side of the tool.
This is the position required
for removing screws and other
fasteners.
CAUTION. Never change the direction of motor rotation
while the tool is switched on. Always switch off at the
power point before operating the forward/reverse switch
otherwise you could damage the motor.
2.Rotate the speed control in an
anti-clockwise direction (viewed
from the rear) to decrease the
speed.
Operation
When the tool is switched on and the motor is running,
the magnetic hex shank bit holder (3) does not rotate.
It is only when the bit or screw is pressed against the
material being fastened that the screw bit turns.
1.Fit the bit or bit holder extension into the magnetic hex
shank bit holder (3) and ensure that the direction of
rotation (forward or reverse) is correct.
2.Switch on the tool. Ensure that the tool is held
perpendicular to the head of the screw.
3.Set the correct speed.
4.Drive or unscrew the fastener by applying pressure
to the screw head.
Lock-on button
The lock-on button (6) can be
used to maintain the operation
of the tool without having to
constantly press the trigger switch
(7).
5.The magnetic hex shank bit holder will stop rotating
when the pressure is released.
1.Squeeze the trigger switch to
set the desired speed of the
motor.
2.While holding the trigger switch depressed, push in the
lock-on button (6). This holds the trigger switch in the
on position without the need to constantly hold it.
Belt clip
The belt clip (4) permits the tool
to be hung on a belt when not in
use thus allowing the operator to
use both hands for other tasks.
When the tool is again required,
it is conveniently available.
3.To release the lock-on button, press and release the
trigger switch.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning
1. Keep your machine and its cord clean. The outside of
the machine can be cleaned using a damp soft cloth
with a mild detergent if required.
2. Some maintenance products and solvents may damage
the plastic parts; these include products containing
benzene, trichloroethylene, chloride and ammonia.
3. Excessive sparking generally indicates the presence
of dirt in the motor or abnormal wear on the carbon
brushes.
4. Take special care to keep the ventilation inlets/outlets
free from obstruction; cleaning with a soft brush
followed by a compressed air jet will usually be
sufficient to ensure acceptable internal cleanliness.
5. Wear eye protection when carrying out cleaning.
CAUTION. Do not use cleaning agents to clean the plastic
parts of the drill.
Power cord maintenance
If the supply cord needs replacing, the task must be
carried out by the manufacturer, the manufacturer’s
agent, or an authorised service centre in order to avoid
a safety hazard.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Carefully read the entire Instruction Manual
before using this product.
With continuing product development changes may
have occurred which render the product received
slightly different to that shown in this instruction
manual. The manufacturer reserves the right to
Before returning this product for a
Warranty Claim or any other reason
Please Call 1300 880 001 (Australia)
or 0800 445 721 (New Zealand)
change specifications without notice. Note:
Specifications may differ from country to country.
When you make your call, please have
the following information at hand:
• GMC Product Type • GMC Product Code
A GMC Service Engineer will take your call and, in
most cases, will be able to solve your problem over
the phone.
The GMC 777 Helpline operates from 7am to
7pm, 7 days a week (EST). This allows you
to contact GMC directly with any queries and
technical questions you have regarding
our products.
You are welcome to use this phone-in service to
make suggestions or give comments about any
GMC product.
45–55 South Centre Road
Melbourne Airport
Victoria, Australia 3045
Tel: (03) 8346 1100 Fax: (03) 8346 1200
Save this Manual for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
|