INSTRUCTION MANUAL
350mm
Hand
Mower
• Melbourne • Perth • Auckland • Hong Kong • Shanghai
HM350C
• Taipei • New York • Verona • London • Paris
Download from Www.Somanuals.com. All Manuals Search And Download.
050308 ED2 JJ
Specifications
Dear Customer
If you require any help with your product, whether it
is a Warranty claim, spare part or user information,
please phone our Help Line for an immediate response.
Phone 1300 880 001 in Australia or 0800 445 721 in
New Zealand.
Cutting width:
Height adjustment:
Blade reels:
350mm
25mm – 75mm
5 x 146mm
210mm
Wheel diameter:
Roller diameter:
Weight:
45mm
Introduction
8.5kg
Your new GMC tool will more than satisfy your
expectations. It has been manufactured under stringent
GMC Quality Standards to meet superior performance
criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years of
dependable service.
Safety instructions
The tool must be used only for its prescribed purpose.
Any use other than those mentioned in this Manual will
be considered a case of misuse. The user and not the
manufacturer shall be liable for any damage or injury
resulting from such cases of misuse.
To use this tool properly, you must observe the safety
regulations, the assembly instructions and the operating
instructions to be found in this Manual. All persons who
use and service the machine have to be acquainted with
this Manual and must be informed about its potential
hazards. Children and infirm people must not use this
tool. Children should be supervised at all times if they
are in the area in which the tool is being used. It is
also imperative that you observe the accident prevention
regulations in force in your area. The same applies for
general rules of occupational health and safety.
The manufacturer shall not be liable for any changes
made to the tool nor for any damage resulting from such
changes.
WARNING. When using hand mowers, basic safety
precautions should always be taken to reduce the risk of
personal injury. Also, please read and heed the advice
given in the additional important safety instructions.
CAUTION. Carefully read through this entire Instruction
Manual before using your new GMC Tool. Take special
care to heed the Cautions and Warnings.
Your GMC tool has many features that will make your job
faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Environmental protection
Recycle unwanted materials instead
of disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling centre and
disposed of in an environmentally
Save these instructions
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Work area
• Maintain tools. Check for misalignment or binding of
moving parts, breakage of parts and any other condition
that may affect the tool’s operation. If damaged, have
the tool repaired before use. Many accidents are caused
by poorly maintained tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
• Keep work area clean and tidy. Before commencing
mowing, check your lawn to ensure that the area is
clean of debris such as stones and mulch. Remove all
obstructing material from the lawn, otherwise the hand
mower could pick up this debris and either damage the
cutting blades or eject it causing possible injury to the
user or other persons in the area.
• Keep visitors away from the work area. All visitors
and onlookers, especially children and infirm persons,
should be kept well away from where you are working.
Do not let others in the vicinity make contact with the
mower.
• Keep hands and feet well away from the cutting
blades. Even when you want to clean the blades, do
not insert your hands into the blade.
• Store tools safely. When not in use, tools should be
locked up out of reach.
• Do not force the tool. The tool will do the job better
and safer working at the rate for which it was designed.
• Dress correctly. Always wear safety footwear when
cutting the lawn with this hand mower. Leather gloves
are also recommended when working outdoors.
• Do not overreach. Keep your footing secure and
balanced at all times.
• Use the tool, accessories etc., in accordance with
these instructions and in the manner intended for
the particular type of tool, taking into account the
working conditions and the work to be performed.
Use of the tool for operations different from intended
could result in a hazardous situation.
Service
• Have your tool serviced by a qualified repair
personnel using only identical replacement parts.
This will ensure that the safety of the tool is
maintained.
Unpacking
Due to modern mass production techniques, it is unlikely
that your mower is faulty or that a part is missing. If you
find anything wrong, do not operate the mower until the
parts have been replaced or the fault has been rectified.
Failure to do so could result in serious personal injury.
• Look after your tools. Keep tools sharp and clean for
better and safer performance. Follow the instructions
regarding lubrication and accessory changes. Should the
hand mower not be functioning correctly, it should be
inspected by an authorized repair centre.
Tool use and care
•
Store idle tools out of the reach of children and do
not allow persons unfamiliar with the tool or these
instructions to operate the tool. Tools are dangerous in
the hands of untrained users.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Know your product
1. Lower handle
2. Middle handle
3. Upper handle
3
4. Metal shroud
5. Wheel
6. Rotating blades
7. Grass catcher (optional)
N
A
Screws
A
A = M6 x 25mm
B = M6 x 30mm
C = M6 x 35vmm
Nuts
N = M6
C
N
2
B
B
N
7
1
4
6
5
5
Download from Www.Somanuals.com. All Manuals Search And Download.
3
F
G
2
1
E
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Carefully read the entire Instruction Manual
before using this product.
With continuing product development changes may
have occurred which render the product received
slightly different to that shown in this instruction
manual. The manufacturer reserves the right to
Before returning this product for a
Warranty Claim or any other reason
Please Call 1300 880 001 (Australia)
or 0800 445 721 (New Zealand)
change specifications without notice. Note:
Specifications may differ from country to country.
When you make your call, please have
the following information at hand:
• GMC Product Type • GMC Product Code
A GMC Service Engineer will take your call and, in
most cases, will be able to solve your problem over
the phone.
The GMC 777 Helpline operates from 7am to
7pm, 7 days a week (EST). This allows you
to contact GMC directly with any queries and
technical questions you have regarding
our products.
You are welcome to use this phone-in service to
make suggestions or give comments about any
GMC product.
45–55 South Centre Road
Melbourne Airport
Victoria, Australia 3045
Tel: (03) 8346 1100 Fax: (03) 8346 1200
Save this Manual for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
|