3
1
2
13W
ELECTRIC
ENGRAVER
DEC007EN
4
1. On/off switch
2. Engraving tip
3. Stroke adjustment dial
4. Tip release screw
5. Power cord
5
Full 2 years home use warranty
Environmental protection
Electrical safety
Whilst every effort is made to ensure your complete
satisfaction with this tool, occasionally, due to the mass
manufacturing techniques, a tool may not live up to our
required level of performance and you may need the
assistance of our service department.
Recycle unwanted materials instead of
•
If cordset is damaged, have it replaced by an
authorised service centre.
disposing of them as waste. All tools, hoses
and packaging should be sorted, taken to
the local recycling centre and disposed of in
an environmentally safe way.
•
Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock.
This product is warranted for a 2-year period for home
domestic use from the date of the original purchase. If
found to be defective in materials or workmanship, the
tool or the offending faulty component will be replaced
free of charge with another of the same item. A small
freight charge may apply.
The warranty replacement unit is only made available
by returning the tool to the place of purchase with
a confirmed register receipt. Proof of purchase is
essential. We reserve the right to reject any claim where
the purchase cannot be verified.
This warranty does not include damage or defects to
the tool caused by or resulting from abuse, accidents,
alterations or commercial or business use.
It also does not cover any bonus accessories unless the
tool is a GMC Platinum Professional model.
Please ensure that you store your receipt in a
safe place.
Conditions apply to the above warranty.
If you need direction of what constitutes a free of
charge warranty claim, please review the guide given
on the rear of the Receipt Holder. An indication is given
as to the types of claim that are permissible, and those
that are not.
Description of symbols
The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
•
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
•
•
Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electric shock.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
Double insulated for additional protection.
Conforms to relevant standards for
electromagnetic compatibility.
CAUTION
Thoroughly read and understand all
instructions before using this product.
•
When operating a power tool outdoors, use an
outdoor extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
S2: 10 min.; Indicates operating time at no more than
10 minutes at rated load followed by a complete cool
down of the tool.
Personal safety
•
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under the
influence of drugs, alcohol, or medication. A moment
of inattention while operating power tools may result
in serious personal injury.
Specifications
Input power:
Power supply:
Engraving bit:
Cord length:
Tool Weight:
13W
230-240V ~ 50 Hz
Tungsten Carbide Tipped steel
1.4 metres
Dear customer
If you require any help with your product, whether it is a
Warranty claim, spare part or user information, please
phone our Help Line for an immediate response.
Phone 1300 880 001 in Australia
or 0800 445 721 in New Zealand.
•
•
•
Use safety equipment. Always wear eye
protection. Safety equipment such as a dust
mask, non-skid safety shoes, hard hat, or hearing
protection use.
Avoid accidental starting. Ensure the switch is in
the off-position before plugging in. Carrying power
tools with your finger on the switch or plugging in
power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before
turning the tool on. A wrench or a key that is left
attached to a rotating part of the power tool may
result in personal injury.
0.4 kg
Safety instructions
WARNING. Read and understand all instructions.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury. The term
“power tool” in all of the warnings below refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Introduction
Your new GMC power tool will more than satisfy
your expectations. It has been manufactured under
stringent GMC Quality Standards to meet superior
performance criteria.
Save these instructions
Work area
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years of
dependable service.
•
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
•
Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
•
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power tools
create sparks which may ignite the dust or fumes.
Caution
•
Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
Carefully read through this entire Instruction Manual
before using your new GMC Power Tool. Take special
care to heed the Cautions and Warnings.
•
Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
Your GMC power tool has many features that will make your
job faster and easier. Safety, performance, and dependability
have been given top priority in the development of this tool,
making it easy to maintain and operate.
•
If devices are provided for the connection of dust
extraction and collection facilities ensure that
these are connected and properly used. Use of
these devices can reduce dust-related hazards.
Code: DEC007EN
Date: 060113
Black
Edition: 12
Op: DCR
Download from Www.Somanuals.com. All Manuals Search And Download.
|