600W 8 LITRE
PORTABLE DUST
EXTRACTION SYST
WITH ACCESSORIES
RDC8LA
INSTRUCTION MANUAL
Code: RDC8LA
Date: 070806
Black
Cyan
Magenta
Yellow
Edition: 03
Op: DCR
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Description of symbols
Your new GMC power tool will more than satisfy
your expectations. It has been manufactured under
stringent GMC Quality Standards to meet superior
performance criteria.
The rating plate on your tool may show symbols. These
represent important information about the product or instructions
on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years
of dependable service.
Double insulated
for additional protection.
CAUTION. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Conforms to relevant standards for
electromagnetic compatibility.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Specifications
Nominal voltage:
Wattage of motor:
Collection drum capacity:
Weight:
230-240V ~ 50 Hz
600W
Environmental protection
Recycle unwanted materials instead
of disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling centre and
disposed of in an environmentally safe way.
8 litres
2 kg
3
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Dress correctly. Do not wear loose clothing or jewellery.
They can be caught in moving parts. Rubber gloves
and non-slip footwear are recommended when working
outdoors. If you have long hair, wear a protective hair
covering.
General safety instructions
To use this tool properly, you must observe the safety
regulations, the assembly instructions and the operating
instructions to be found in this Manual. All persons who use
and service the machine have to be acquainted with this
Manual and must be informed about its potential hazards.
Children and infirm people must not use this tool. Children
should be supervised at all times if they are in the area in
which the tool is being used. It is also imperative that you
observe the accident prevention regulations in force in your
area. The same applies for general rules of occupational
health and safety.
8. Use safety accessories. Safety glasses and earmuffs
should always be worn. A face or dust mask is also
required if the sanding operation creates dust.
9. Do not abuse the power cord. Never pull the cord to
disconnect the tool from the power point. Keep the cord
away from heat, oil and sharp edges.
10. Secure the work piece. Use clamps or a vice to hold
the work piece. It is safer than using your hand and
frees both hands to operate the tool.
WARNING. When using power tools, basic safety
precautions should always be taken to reduce the risk of
fire, electric shock and personal injury. Also, please read
and heed the advice given in the additional important safety
instructions.
11. Do not overreach. Keep your footing secure and
balanced at all times.
12. Look after your tools. Keep tools sharp and clean for
better and safer performance. Follow the instructions
regarding lubrication and accessory changes. Inspect
tool cords periodically and, if damaged, have them
repaired by an authorised service facility. Inspect
extension cords periodically and replace them if
damaged. Keep tool handles dry, clean and free from oil
and grease.
1. Keep the work area clean and tidy. Cluttered work areas
and benches invite accidents and injury.
2. Consider the environment in which you are working.
Do not use power tools in damp or wet locations. Keep
the work area well lit. Do not expose power tools to rain.
Do not use power tools in the presence of flammable
liquids or gases.
3. Keep visitors away from the work area. All visitors and
onlookers, especially children and infirm persons, should
be kept well away from where you are working. Do not
let others in the vicinity make contact with the tool or
extension cord.
13. Disconnect idle tools. Switch off the power and
disconnect the plug from the power point before
servicing, when changing accessories and when the tool
is not in use.
14. Remove adjusting keys and wrenches. Check to see
that keys and adjusting wrenches are removed from the
tool before switching on.
4. Store tools safely. When not in use, tools should be
locked up out of reach.
5. Do not force the tool. The tool will do the job better and
safer working at the rate for which it was designed.
15. Avoid unintentional starting. Always check that the
switch is in the OFF position before plugging in the tool
to the power supply. Do not carry a plugged in tool with
your finger on the switch.
6. Use the correct tool for the job. Do not force small tools
or attachments to do the job best handled by a heavier
duty tool. Never use a tool for a purpose for which it was
not intended.
16. Use outdoor rated extension cords. When a tool
is used outdoors, use only extension cords that are
intended for outdoor use and are so marked.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
• The appliance is not intended for use by young children or
infirm persons without supervision. Young children should
be supervised to ensure they do not play with the appliance.
17. Stay alert. Watch what you are doing. Use common
sense. Do not operate a power tool when you are tired.
18. Check for damaged parts. Before using a tool, check
that there are no damaged parts. If a part is slightly
damaged, carefully determine if it will operate properly
and perform its intended function. Check for alignment of
moving parts, binding of moving parts, breakage of parts,
proper mounting and any other conditions that may affect
the operation of the tool. A part that is damaged should
be properly repaired or replaced by an authorised service
facility, unless otherwise indicated in this Instruction
Manual.Defective switches must be replaced by an
authorised service facility. Do not use a tool if the switch
does not turn the tool on and off correctly.
• Use only manufacturer’s recommended attachments
and consumables.
• Never modify the cleaner in any way - this is dangerous
and will invalidate the warranty.
• Do not use cleaner without dustbag in place.
• If motor sound becomes higher pitched always check for
the following:
- Blocked hose or accessory.
- Blocked filter.
- Full container.
19. Guard against electric shock. Prevent body contact
with grounded objects such as water pipes, radiators,
cookers and refrigerator enclosures.
• Never try to move the cleaner by pulling with the
mains lead.
• Always check that the filter is clear and not blocked. Keep
all openings clear of any blockages.
20. Use only approved parts. When servicing, use only
identical replacement parts. Use an authorised service
facility to fit replacement parts.
• When lifting the unit, always lift it with the handle or under
rim of bucket. Beware of excess weight.
Additional safety rules for
dust extraction systems
Please read before use.
• Do not leave appliance unattended when plugged in.
Unplug from outlet when not in use and before servicing
and cleaning.
• Always switch the unit off before changing attachments or
connecting different power tools.
• Always disconnect equipment from the appliance when it
is not in use.
• This machine is for dry use only and should not be used
or stored outdoors in wet conditions.
• To avoid electric shock, do not expose to rain. Store
indoors.
• This is not a trade tool and is designed for house hold
applications and home handy man conditions.
• Never use in the presence of explosive liquids, vapours or
explosive dust – such as coal or grain.
CAUTION. This machine is not suitable for picking up
Hazardous dust.
• Never pick up asbestos or asbestos dust.
Accessories
• Dusting Brush
• Crevice Nozzle
• Upholstery Nozzle
• Shoulder Strap
• Flexible Vacuum Hose
• Wood dust and chips in a confined area can give rise
to fire or an explosion. Guard against possible ignition
sources.
• Do not pick up anything that is burning or smouldering –
such as metal grinding dust, cigarette ends, hot coals,
matches or similar.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Know your product
The GMC Dust Extraction System
is designed for collecting wood dust
generated from cutting and drilling
with electric power tools.
1
5
It can also be used as a vacuum cleaner
for cleaning dust, wood shavings etc.
from machines and the floor of the
working area.
2
9
It is not to be used for the suction
3
of liquids.
1. Shoulder Strap
2. Vacuum port
3. Release clips
7
4. Power cord (not shown)
5. Lid
6a. Filter bag
6b. Filter bag clip
7. Collection drum
8. Power tool adaptors
9. Flexible vacuum hose
10. ‘On/off’ switch
11. Crevice Nozzle
12. Dusting Brush
13. Upholstery Nozzle
11
12
13
1
8
6a
6b
10
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Unwind the power cord fully
and connect it to the power
point or an extension lead.
Operation
The GMC 8 litre vacuum/dust extraction system comes
assembled and ready for use.
3. To turn the unit on push
the ‘on/off’ switch (10) to
the ‘I’ position.
The filter must always be in the correct position to reduce
the risk of leaks and possible damage to the vacuum.
Ensure that the filter is completely covering the filter cage
and that the filter bag clip (6b) is as close to the lid as
possible. Ensure there are no gaps between the filter and
the lid. It is very important to assemble the filter to the cage
without allowing any possible leaks or tears. Any leaks will
allow the picked up debris to be blown out of the blower port
and back into the surrounding environment.
4. To turn the unit off push
the ‘on/off’ switch to the
‘O’ position.
Use as a dust
extraction unit
Your GMC Vacuum can also be
When using your vacuum to pick up very fine dust, it will
be necessary for you to empty the dust drum and clean or
replace the filter at more frequent intervals to maintain peak
vacuum performance.
used as a dust extraction unit.
Note. Do not use this unit for
picking up hazardous dust.
1. Locate the vacuum port (2)
on your vacuum.
Use as a Vacuum
Vacuuming tips
• For crevices, corners etc.,
use the crevice nozzle (11)
• For upholstered furniture use
the upholstery nozzle (13)
2. Insert the hose into the vacuum port.
3. Attach the other end on the hose onto the dust extraction
port on the power tool.
4. Turn the vacuum on by pushing the ‘on/off’ switch to the
‘I’ position.
• For curtains, lightweight
fabrics etc., use the
upholstery nozzle (13)
• For frames, bookshelves etc.,
use the dusting brush (12)
1. Insert the hose into the
vacuum port (2) and attach
the appropriate nozzle.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
4. After cleaning check the
filter thoroughly for tears or
small holes. Do not use a
filter with tears or holes in it.
Even a small hole can cause
a lot of dust to come out
of your vacuum. Replace it
immediately.
Emptying the drum
WARNING. Take care, the tank
may be heavier than you think.
1. Switch off the unit and unplug
from the power point.
2. Remove the lid (5) of the
vacuum by pulling outward
on the release clips (3) on
each side of the vacuum.
Lift off the lid.
5. Before installing the filter on
the vacuum clean the area
of the lid so that the filter bag
clip (6b) will seal the bag
against the lid and stop small
particles from bypassing the
filter bag.
3. Empty the drum contents into an appropriate waste
disposal container.
4. Replace the lid, ensuring that both retaining clips are
fastened, plug in and continue as before.
6. Squeeze the filter bag clip
in on itself and place the
Replacing the filter
WARNING. Always ensure that
the tool is switched off and
the plug is removed from the
power point before making any
adjustments or maintenance
procedures.
replacement filter bag on the
filter cage until the open end
touches the bottom of the lid.
Note. To avoid damage to the blower wheel and motor,
always reinstall the filter before using the vacuum.
Note. Clean the filter in an open area, cleaning should be
done outdoors.
Your filter should be cleaned
often to maintain peak
performance.
WARNING. Do not remove the filter cage. It is fitted to keep
the shape of the filter bag during operation.
1. Squeeze the filter bag clip
(6b) in on itself.
2. Remove the filter bag (6a)
from the filter cage.
3. To clean the filter bag (6a),
gently brush away small dirt
particles that may have stuck
to the material.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
WARNING. If a problem occurs always switch the unit off immediately.
Trouble
Problem
Suggested remedy
Vacuum will not pick Clogged filter
Clean or replace filter.
up dirt.
Clogged hose
Remove hose and clear debris.
Make sure lid is securely attached to dust drum.
Air leak
Vacuum will not run No electricity
Make sure electrical outlet has voltage. (A qualified
electrician may need to be contacted).
CAUTION. Water must never come into contact with
the tool.
Storage
Before storing your vac, the dust drum should be emptied
and cleaned. The cord should be wrapped around the
unit and the hose should be stored in the hose storage
section. Accessories should be kept in the same area as
the vacuum so they can be readily available. The vacuum
should be stored indoors.
General Inspection
Regularly check that all the fixing screws are tight. They
may vibrate loose over time.
Power cord maintenance
If the supply cord needs replacing, the task must be carried
out by the manufacturer, the manufacturer’s agent, or an
authorised service centre in order to avoid a safety hazard.
Maintenance
WARNING. Always ensure that the tool is switched
off and the plug is removed from the power point before
making any adjustments or maintenance procedures.
1. Keep the tool’s air vents unclogged and clean at
all times.
2. Regularly check to see if any dust or foreign matter has
entered the grills near the motor and around the
on/off switch. Use a soft brush to remove any
accumulated dust. Wear safety glasses to protect
your eyes whilst cleaning.
3. If the body of the tool needs cleaning, wipe it with a soft
damp cloth. A mild detergent can be used but nothing like
alcohol, petrol or other cleaning agent.
4. Never use caustic agents to clean plastic parts.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
GMC customer assist
If your product needs repairing, replacing,
technical service or you simply need help or advice,
please contact us on our Customer Assist Line
1300 880 001 (Australia) or 0800 445 721 (New Zealand).
For prompt service we suggest you log your service request
access to the Internet, please contact our service department
on 1300 880 001 (Australia) or 0800 445 721 (New Zealand).
7am –7pm, 7days a week (AEST).
Please note that if repair or replacement is required,
you must provide a valid original purchase receipt.
You will need the following details at hand to log your service request;
Personal details: First & Last name, address, pick up address,
contact phone numbers, email address
Product details: Product number, date of purchase, retailer bought from,
State & postcode, receipt number, reason for the request,
copy of official purchase receipt
Attach your purchase receipt and save with this Manual for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
|