2400W
HEAVY DUTY
BLOWER
VACUUM/MULC
WITH METAL
IMPELLER
BLV8000A
INSTRUCTION MANUAL
Code: BLV8000A IM
Date: 070518 Edition: 04
Black
Cyan
Magenta
Yellow
Op: GM
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of symbols
Introduction
The rating plate on your tool may show symbols.
These represent important information about the
product or instructions on its use.
Your new GMC power tool will more than satisfy
your expectations. It has been manufactured under
stringent GMC Quality Standards to meet superior
performance criteria.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years
of dependable service.
Double insulated for additional protection.
CAUTION. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Conforms to relevant standards
for electromagnetic compatibility.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Warning.
Read the instruction manual carefully
Environmental protection
Recycle unwanted materials instead
of disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling centre and
disposed of in an environmentally safe way.
WARNING. Do not use in the rain, or leave outside
while it is raining.
WARNING. Keep spectators away.
Beware of objects being flung out.
Specifications
Voltage:
230–240 Vac ~ 50Hz
2400W
13000 min-1
Input Power:
Speed:
WARNING. Remove the plug from the wall socket
before carrying out any kind of maintenance
Air Speed:
250 km/h
WARNING. Rotating blades.
WARNING. Do not put hands or feet under the
cover of the machine when it is running
Collection Bag Capacity:
Mulching Ratio:
Insulation:
45 Litre
10:1
Double insulated
4.2kg
Tool Weight
3
Download from Www.Somanuals.com. All Manuals Search And Download.
• Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
Safety instructions
WARNING. Read and understand all instructions.
Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury. The term “power
tool” in all of the warnings below refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
• When operating a power tool outdoors, use an
outdoor extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of
electric shock.
This appliance is not intended for use by young children
or infirm persons unless they have been adequately
supervised by a responsible person to ensure that they can
use the appliance safely.
Personal safety
• Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or under the
influence of drugs, alcohol, or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
Young children should be supervised to ensure that they do
not play with the appliance.
Save these instructions
Work area
• Use safety equipment. Always wear eye protection.
Safety equipment such as a dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
• Keep work area clean and well lit. Cluttered and dark
areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks which
may ignite the dust or fumes.
• Avoid accidental starting. Ensure the switch is in the
off-position before plugging in. Carrying power tools with
your finger on the switch or plugging in power tools that
have the switch on invites accidents.
• Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
• Remove any adjusting key or wrench before turning
the tool on. A wrench or a key that is left attached
to a rotating part of the power tool may result in
personal injury.
Electrical safety
• Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
• Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
• Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
• Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be caught
in moving parts.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
• If devices are provided for the connection of dust
extraction and collection facilities ensure that these
are connected and properly used. Use of these
devices can reduce dust-related hazards.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Power tool use and care
Additional safety rules for garden vacs
• Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the job
better and safer at the rate for which it was designed.
• Always wear adequate protective clothing when operating
the tool to avoid injuries to face, eyes, hands, feet, head
or hearing. Use safety glasses or a face shield, high
boots or sturdy shoes, long trousers, work gloves, a hard
hat and earmuffs.
• Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
• Do not start the tool when it is upside down or when it is
not in the operating position.
• Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
• Switch the motor off and remove the plug when the tool
is not being used, left unattended, being cleaned, being
moved from one place to another or when the extension
cord is entangled or damaged.
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
• Do not operate the tool near people, especially children
or pets. Turn it off if they get too close. Maintain a safe
distance of at least 5m from other people when using
the tool.
• Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation. If
damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
• The operator is responsible for accidents or hazards
occurring to other people or their property.
• Do not handle the plug or the tool with wet hands and do
not use the tool in the rain.
• Use only outdoor rated extension leads that are so
marked. Keep the extension cord away from heat, oil and
sharp edges.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
• Ensure that the extension lead is secured in a manner
that prevents it from disconnecting from the plug whilst
in use.
• Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. Use of the power tool
for operations different from intended could result in a
hazardous situation.
• Keep all the air intakes and the vacuum inlet free of dust,
lint, hair and other material that may cause a reduction in
air flow.
• Keep a balanced and stable stance while using the tool.
Service
• Do not switch on the tool in enclosed or poorly ventilated
spaces or in the presence of inflammable and/or
explosive substances such as liquids, gasses
and powders.
• Have your power tool serviced by qualified repair
personnel using only identical replacement parts.
This will ensure that the safety of the power tool
is maintained.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
• Do not get distracted and always concentrate on what
you are doing. Use common sense. Never operate the
tool when you are tired, sick or under the influence of
alcohol or other drugs.
Unpacking
Due to modern mass production techniques, it is unlikely
that your GMC Power Tool is faulty or that a part is missing.
If you find anything wrong, do not operate the tool until the
parts have been replaced or the fault has been rectified.
Failure to do so could result in serious personal injury.
• Do not operate this appliance with long loose hair or
loose fitting jewellery. Tie long loose hair back and
remove loose fitting jewellery.
Contents
Collection bag
• Do not allow the garden vac to pick up any burning or
smouldering materials like ashes, cigarette butts etc.
Tube fixing screw and cover (x 2)
Shoulder strap
• Do not attempt to pick up breakable objects like glass,
plastics, china etc.
• Do not use in vacuum operation without the collection
bag fitted.
Patio head
• Do not use the garden vac on gravel surfaces.
• Only operate the tool during broad daylight or with
adequate artificial light.
• When the tool is not in use, store it in a dry place and out
of reach of children.
• After use, disconnect the tool from the power supply
and check for damage. If you have the slightest doubts,
contact an authorised service centre.
• Only use the tool according to the instructions given in
this manual.
• Check regularly that the screws are tight.
• Use only spare parts and accessories recommended by
the manufacturer.
• Do not try to repair the tool or access internal parts.
Contact authorised service centres only.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Know your product
1. On/Off trigger switch
2. Blower/vacuum selector lever
3. Rear handle
3
1
4. Front handle
5. Collection bag
10
8
4
6. Cord support
14a
7. Lower shaft locking screw location
8. Shoulder strap attachment location
9. Patio head
2
13
10. Housing
12a
11. Shoulder strap
12a. Blow/vac tube - upper
12b. Blow/vac tube -lower
13. Collection bag locking clips
14a. Bag retaining clip - upper
14b. Bag retaining clip - lower
5
7
14b
12b
9
6
11
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation of the blower vac prior to use
To fit the collection bag
The BLV8000A blower vac requires some assembly prior
to use for the first time. This includes extending of the
teloscopic blower vac tube, fitting of the collection bag and
fitting of the shoulder strap to the housing.
WARNING. Never operate the vacuum without the
collection bag attached.
Note. Always make sure the bag zipper is closed when the
unit is in use.
Extending the telescopic blower vac tube
For use as a vacuum, the collection bag (5) must be fitted.
WARNING. The Blower Vacuum must be fully assembled
with the blower tubes fully extended and secured in place
before use.
To fit the collection bag, turn the blower vac upside down so
the vacuum outlet is exposed.
1. Place the bag connector over
the vacuum outlet and push
the two collection bag locking
clips (13) inwards to secure
the collection bag firmly
in place.
1. Firmly take hold of the blow/vac tube - lower (12b) and
extend it out fully until the arrow on the lower tube is
clearly visible.
2. Fit the top collection bag strap
onto the bag retaining clip
- upper (14a) and the lower
collection bag strap onto the
bag retaining clip - lower (14b).
EXTENSION MARK
2. Two screws are supplied for
securing the tube in place.
With the blow/vac tube
- lower (12b) completely
lowered and the arrow
visible. Insert the two fixing
screws into the holes in the
blow/vac tube - upper (12a)
and through into the blow/vac
tube - lower (12b). Secure
tight with a screwdriver
(not supplied).
To remove the collection bag
1. Unhook the collection bag straps from the upper and
lower bag retaining clips (14a & 14b).
2. Push the two collection bag locking clips (13) inwards
and pull the collection bag out and away from the housing
(10) of the blower vacuum.
3. Lightly tap the plastic caps
on top of the fixing screws to
prevent from tamper.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Shoulder strap
Turning the blower vac ON
Your BLV8000A blower vac is supplied with a shoulder strap
to improve user comfort during use. The strap assembly
can be fitted or removed from the
1. Plug the power cord into an
approved electrical extension
cord, and turn the extension
cord on.
top of the housing via the metal
buckle on the end of the strap.
2. Ensuring the blower/vac is
directed in a safe direction,
squeeze the trigger switch and
the blower/vac will start.
1. To fit the shoulder strap (11),
simply open the buckle on the
strap and fit it through the hole
provided on the housing of
the blower/vac.
Be sure to be holding the blower
vac firmly on start up.
Patio Head
Turning the blower vac OFF
To turn the blower vac “OFF”, release the trigger switch.
IMPORTANT. After you have turned the blower vac off, do
not leave the product until the blower vac has been fully
disconnected from the electrical supply.
1. To install the patio head simply
push the patio head onto the
blow/vac tube - lower (12b)
until it locks in place.
Extension cord support
WARNING. A damaged extension cord can cause electric
shock or risk of fire. Please inspect the extension cord
periodically. The appliance shall not be used if the extension
cord is damaged, it must be replaced before operation.
Use an extension cord suitable for outdoor with a maximum
length of 30m.
Operation of the blower vac
Prior to using the blower vac, ensure you have read and
understood this instruction manual.
Ensure you are wearing suitable clothing and also safety
equipment like safety glasses, ear protection and a mask
if necessary.
During use of the blower vac, the extension cord will
continually be pulled as you move from one area to another.
Ensure the attachments to the blower vac are correctly
fitted and adjusted.
An extension cord support has been provided on the
housing of the blower vac to assist in preventing the
electrical connection between the extension cord and blower
vac plug being forced apart.
Be aware of other people and animals in the area where
you are to be operating the blower vac.
Note. The support is for the extension cord, and not the
cable from the blower vac.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
1. To fit the extension cord to
the support, make a tight
loop in the extension cord,
approximately 300mm from
the socket on the
Selecting the vacuum operation
1. Push the selector lever (2) up.
You will hear a loud click as it
goes into place.
Note. When the vacuum
extension cord.
operation is selected, air and
debris are drawn up through
the large vac tube, and forced
through the metal mulching
impeller. The debris is mulched
and then blown down into the collection bag.
2. Fit the loop into the cord
support (6)located on the
power cord of the blower/vac.
3. Push the loop all the way
through the cord support (6)
by approximately 25mm.
IMPORTANT. Always ensure the collection bag is correctly
attached as per the “Fitting the collection bag” section in
this manual.
Important notes when using the blower/
vacuum selector lever
Do not force the lever. The lever should move with very little
resistance. If the lever is difficult to move, disconnect the
power supply, remove the collection bag and ensure debris,
dirt or mud has not jammed the lever.
Selecting the blowing operation
1. Move the selector lever (2)
down. You will hear a loud
click as it goes into place.
Note. When the blow operation
is selected, air is drawn up
through the large blow/vac tube
and then expelled at a much
higher velocity in the lower cavity
below the blow/vac tube.
When selecting either of the operations, ensure the selector
lever is fully in one position or the other, not half way.
To empty the collection bag
It is not necessary to remove the collection bag from the
blower vac when the bag needs to be emptied.
The rear of the bag is fitted with a full length zip.
Simply open the zip and empty the contents.
IMPORTANT. Ensure when the blow operation is selected
the blower/vac is pointed, directed and used in a safe
manner. Do not direct the air flow from this blower vac
directly or indirectly towards another person.
Ensure to close the zip prior to operating the blower vac.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips for using your blower vac
Maintenance and storage information
The following points may assist you in the operation
of the blower vac.
Prior to cleaning or any maintenance, always ensure
the power plug has been removed from the electrical
power supply.
• Always try and vacuum dry leaves, cuttings or general
garden debris.
When you have finished using the blower vac, always check
to make sure the product is clean and free of dirt and debris.
This is important around the selector lever flap which is
just inside the round outlet. To check this area, remove the
collection bag and ensure this area inside the outlet tube is
free of debris and dirt.
• Wet material is difficult to mulch and also can cause the
blower vac to clog.
• If the leaves etc. are damp, then use the blower vac in
blow selection to pile the leaves etc. into one area, vac
and mulch the leaves when dry.
Operate the selector lever backwards and forwards to
ensure correct operation.
• Avoid using the vac on areas where there are stones, or
other hard objects. These objects will damage the impeller
of the blower vac.
Do not hose or submerge any part of the blower vac.
Do not use solvents to clean the blower vac.
• It is also advisable not to allow the blower vac to
pick up soil. Soil generally contains moisture and
when combined with other garden debris can clog the
blower vac.
Store the blower vac in a dry place, and out of reach
of children.
Power cord maintenance
If the supply cord needs replacing, the task must be carried
out by the manufacturer, the manufacturer’s agent, or an
authorised service centre in order to avoid a safety hazard.
• The blower vac is not a garbage disposal unit. Do not
attempt to mulch any material other than general
garden debris.
• For better performance and comfort, it is recommended
the collection bag is emptied when it becomes
approximately half full. This reduces the weight and also
allows the vac operation to perform at its highest level.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
GMC customer assist
If your product needs repairing, replacing,
technical service or you simply need help or advice,
please contact us on our Customer Assist Line
1300 880 001 (Australia) or 0800 445 721 (New Zealand).
For prompt service we suggest you log your service request
access to the Internet, please contact our service department
on 1300 880 001 (Australia) or 0800 445 721 (New Zealand).
7am –7pm, 7days a week (AEST).
Please note that if repair or replacement is required,
you must provide a valid original purchase receipt.
You will need the following details at hand to log your service request;
Personal details: First & Last name, address, pick up address,
contact phone numbers, email address
Product details: Product number, date of purchase, retailer bought from,
State & postcode, receipt number, reason for the request,
copy of official purchase receipt
Attach your purchase receipt and save with this Manual for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
|