Z-150 Bracket
Typical mounting on IN-SWINGING door
Armature
Frame
Z-Bracket
Door
In-Swinging
24
170
32
Application for the Electromagnet:10003F
30
6
180
40
48
180
Unit:mm
6
38
Installation Steps of Z bracket for In-swinging doors
1
2
3
4
Tighten the electromagnetic lock
on the L bracket by using the
fixing screw.
Assemble the Z bracket, and make
sure that the Z bracket is adjustable.
Insert the guide pins into the
armature plate.
Put one rubber washer between
armature plate and the Z bracket.
5
6
Finish
Power
Once the position is correct,
Turn on the power of EM-Lock,
and let the armature plate bonds
to the EM-lock. Adjust the position
between the Z bracket and the
door frame.
Close the door. Measure the correct
position by bringing the armature
plate close to the contact surface of
the electromagnetic lock.
use the screws to permanently
mount the Z bracket on the door
frame. This should be the last step.
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-Z-150 Ver. C Published on 2008.05.29
Download from Www.Somanuals.com. All Manuals Search And Download.
|