GL-1200
Gate Water-Proof Electromagnetic Lock
Statement
The Electromagnetic Locks are totally sealed in an epoxy
filled stainless steel case for water-resistant and vandal-
resistant purpose. A threaded conduit fitting ensures weather
resistant protection of the wiring therefore it is ideal for indoor
and outdoor applications, even in severe weather.
Wel offers up to 1200 pounds holding force with 12V DC
power input (24V DC or 12/24V DC dual input voltage
available by special order), it is the best choice for electronic
security industry and system integrators.
Magnet
Armature
Magnet
Armature
(Power Off)
(On Power)
Unique Anti-Residual design
When there is no power, there will be no holding force, and the push-off button will
pop out immediately, to release the Electromagnetic Lock and the Armature Plate
for no residual magnetism.
Waterproof Test:
Reference to IEC 60529 Edition 2.1: 2001-02-IPX7
This series of Waterproof Magnetic Lock is made with epoxy
potting compound and is protected by this compound. Also,
GEM Waterproof Series Magnetic Locks have been proved to
have withstood
a
water resistance as established in
accordance with the test procedures of IPX7, IPX8 through a
trusted third party. Therefore users need not worry that the
lock will be rusted or sparked, if the lock is using in outdoor
applications and installing in confined space where any
inflammable gas.
Specifications
Voltage Tolerance: 15%
Current Draw: 460mA@12Vdc (at temperature 20C)
(Further notice for diverse input voltage on special order requirement)
Magnetic bond sensor monitor output (GL-1200R)
(SPDT rated 0.25A@12V DC), remotely monitors the door
lock or unlock status. (N.C. Output--Door opened; N.O.
Output--Door closed)
Operating Temperature: -10~55C )14~131F(
Humidity: 0~95% non-condensing.
Lock's surface Temperature (when the power is on):
<current temperature +20C
Holding Force: Up to 1200 lbs )545 Kg(
Dimensions:
Magnet:(L) 202, (W) 62, (D) 40 mm
Armature Plate:(L) 185, (W) 62, (D) 16 mm
Special Finishes for magnet and armature plate: Zinc
Epoxy Potting Compound: E87252 (S), UL94V-0
Weight )Approx.(: 4.8 Kg
Warranty
The product is warranted against defects in material and
workmanship while used in normal service for a period of
5
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
The products are manufactured under an ISO
9001
&
QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-GL-1200 Ver. C Published on 2008.05.12
Download from Www.Somanuals.com. All Manuals Search And Download.
|