EM-NH300
Mini Electromagnetic Lock
Operating Features
EM-NH300M: Bond sensor output & Status LED
Bond sensor is used to indicate the door
status as in a locked or unlocked condition.
Status LED is a visual feedback for user to
give the true status of the lock at any time.
Green light indicates the door is insecure
Bond sensor monitor output : SPDT rated: 3A@12VDC
Trigger
EM-NH300M-TD: Re-locking time delay
Relocking Time Delay Switch ensures
the lautomatically turns to lock mode
N.C.
Timer Adjust
l
COM.
N.O.
Patent:
after the door is closed properly and it
can be adjusted from 0 to 90 seconds.
ZL 2006 2 0122522.X
Nr. 20 2006 012 052.1
M308308
Shorten
Power
Input
GB 06 1 6099.8
06 07229 (France)
Features
Special Mounting Plate design
MOV provides spike and surge protection.
Anodized aluminum housing.
Groove template & housing for easy installation.
Dual voltage 12 or 24 VDC (selectable).
Anti-Residual magnetism designed.
Complete mounting hardware included.
Cable
Fasten the mounting plate on
t h e s i t e t h e n i n s t a l l
electromagnet lock with
power lead cable through
mounting plate slot hole.
Statement
The NH series electromagnet lock is an important mounting
plate design breakthrough. The mounting plate is designed
with
a
well engineered sliding mechanism that makes
electromagnet considerably easy to clasp the mounting plate
to allow security of use and maximize the ease of installation.
Therefore, even if used for longer periods, the tricky
innovation in its design will prevent the electromagnet of
being falling when the screw are loosening up .
The EM-NH300 Series are high quality and safety range of
standard fail-safe electromagnetic locks that is simply, works
well in order to effectively secure with doors. It is surface
mounted face to face locks offering up to 600 pounds holding
force which this lock is recommended for applications which
require higher levels of access and egress control and is
suitable for fire doors and emergency exit doors.
For assembling the mounting
plate and the electromagnet
lock into the groove, please
make the mark on the
mounting plate and the mark
on the electromagnet lock
itself to be a straight line for
alignment. Either aligning
from left side or from right
side is feasible.
Slide the electromagnetic
lock to fit with the mounting
plate as the drawing. Once
t h e c o r r e c t p o s i t i o n i s
encountered, use the Allen
Wrench to fasten the fixing
screws through the bottom of
the electromagnet lock into
the mounting plate.
Specifications
Voltage Tolerance:15%
Current Draw: 500mA@12Vdc;250mA@24Vdc
)at 20 degree centigrade(
Operating Temperature from -10 to 55 degree
centigrade
Humidity: 0~95% non-condensing.
Holding Force: Up to 600 lbs (272 Kg)
Dimensions:
Magnet:(L) 250, (W) 46, (D) 25 mm
Armature Plate:(L) 185, (W) 38, (D) 12 mm
Mounting Plate:(L) 250, (W) 25, (D) 5 mm
Finishes for magnet and armature plate: Zinc
Epoxy Potting Compound: E87252 (S), UL94V-0
Weight (Approx.): 2.0 Kg
After the electromagnet
firmly assembled with the
mounting plate, use the
screws to fasten the lock on
the site permanently.
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
The products are manufactured under an ISO
9001
&
QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-EM-NH300 Ver. D Published on 2008.08.18
Download from Www.Somanuals.com. All Manuals Search And Download.
|