®
Crosspoint Matrix
EXT-HDMI1.3-848CPN
w.gefen.com
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
1
2
3
4
5
6
7
8
8
9
Introduction
Operation Notes
Features
Front Panel Layout
Front Panel Descriptions
Back Panel Layout
Back Panel Descriptions
Connecting the Gefen 8x8 Crosspoint Matrix For HDMI 1.3
Wiring Diagram
Controlling the Matrix using the Front Panel Buttons
10 IR Remote Description
11 IR Remote Installation
12 IR Remote Configuration
13 Using the IR Remote
13
Routing Sources to Displays
14 Setting the IR Channel on the Matrix
15 RS-232 Serial Interface
16
RS-232 Commands
21 Fast Switching (FST)
24 EDID Management
25 Rack Mount Installation
26 Specifications
27 Warranty
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Congratulations on your purchase of the Gefen 8x8 Crosspoint Matrix for HDMI
1.3. Your complete satisfaction is very important to us.
Gefen
Gefen delivers innovative, progressive computer and electronics add-on solutions
that harness integration, extension, distribution and conversion technologies.
Gefen’s reliable, plug-and-play products supplement cross-platform computer
systems, professional audio/video environments and HDTV systems of all sizes
with hard-working solutions that are easy to implement and simple to operate.
The Gefen 8x8 Crosspoint Matrix for HDMI 1.3
The Gefen 8x8 Crosspoint Matrix for HDMI 1.3 routes high definition video at
resolutions of up to 1080p with multichannel digital audio from any eight HDMI
sources to any eight displays. The 8x8 Crosspoint Matrix supports advanced
digital audio formats such as Dolby True HD and DTS-HD Master audio. Each
source is accessible at all times by any display by selecting it with the included
IR remote, by using the RS-232 port or by using the button switches on the front
panel.
How It Works
Connect up to eight Hi Def sources to the Gefen 8x8 Crosspoint Matrix for HDMI
1.3 using the supplied HDMI cables. Connect up to eight HDTV displays to the
Matrix’s HDMI outputs. 3D content can be displayed when connecting a 3DTV
and 3D source. Power-on the Matrix and apply power to the sources and to the
displays. A/V sources can now be routed to any combination of display devices
using the front panel buttons, the included IR remote control or RS-232 control.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION NOTES
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE GEFEN 8X8 CROSSPOINT MATRIX FOR HDMI 1.3
•
•
•
There is no internal scaling in the Gefen 8x8 Crosspoint Matrix for HDMI 1.3.
All of the attached monitors must be able to display the resolutions output by
the source devices. For maximum compatibility it is recommended that only
one compatible / common resolution be used by all of the source devices.
The Gefen 8x8 Crosspoint Matrix for HDMI 1.3 is a full-featured crosspoint
matrix for eight inputs and eight outputs. Any source can be connected to
any display at any time, using the remote control or by controlling it via the
buttons on the front panel.
3D content pass-thru is enabled to all outputs when a 3DTV is connected
to Output A. Ensure to power cycle the Matrix once a 3DTV is connected to
Output A during standard operation.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Supported HDMI 1.3 Features
•
•
•
•
225 MHz (up to 12-bit YUV 444 @ 1080p)
Deep Color
Dolby TrueHD and DTS-HD Master Audio
Lip-Sync
Features
•
Displays any of eight (8) Hi Def sources on eight (8) HDTV displays,
independently
•
•
Maintains beautiful, sharp HDTV resolutions up to 1080p Full HD and 2K
3DTV Pass-Through
•
•
•
EDID Management for rapid integration of sources and display devices.
Fast Switching for quick and responsive HDMI signal routing.
Supports digital audio formats including LPCM 7.1 audio, Dolby Digital Plus,
Dolby TrueHD, and DTS-HD Master Audio
•
•
•
•
•
•
IR Control
Built-in IR Extender
RS-232 serial control
Locking HDMI Connectors
Rack-mountable
HDCP-compliant
Package Includes
(1) Gefen 8x8 Crosspoint Matrix for HDMI 1.3
(8) 6 ft HDMI cables (M-M)
(1) 6 ft DB9 Serial Cable (M-F)
(1) IR Remote Control Unit
(1) 24V DC Power Supply
(1) Rack Ears
(1) User Manual
3
Download from Www.Somanuals.com. All Manuals Search And Download.
FRONT PANEL LAYOUT
4
Download from Www.Somanuals.com. All Manuals Search And Download.
FRONT PANEL DESCRIPTIONS
1
2
3
Main LCD Display
This is a two-line, sixteen-character display which displays status information
and is also used to manage display / source routing.
Power On/Off Button
Turn the power on or off using this button (the LED will change color from red to
green).
Lock Button
Temporarily locks the front panel controls. This prevents inadvertent routing
changes or power-down. The LED above the button is turns bright green when
the front panel is locked. Press once to lock the front panel buttons. Press this
button again to unlock the front panel buttons.
4
5
6
IR Sensor
Receives signals from the IR Remote Control
Menu Button
Pressing this button changes between routing mode and status mode.
Navigation Buttons
These buttons are used to navigate between the inputs and outputs of the
Gefen 8x8 Crosspoint Matrix for HDMI 1.3. For details on how these controls
are used, see page 9.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
BACK PANEL LAYOUT
6
Download from Www.Somanuals.com. All Manuals Search And Download.
BACK PANEL DESCRIPTIONS
1
2
3
HDMI Input Ports (1 – 8)
Connect a Hi-Def source device to any of these input ports.
IR Extender Port
Used to extend the IR Sensor range of the unit.
RS-232 Serial Port
Connects to the RS-232 control device. The 8x8 Crosspoint Matrix for HDMI 1.3
may be switched remotely using this port. See page 15 for more information.
4
5
24V DC Power Receptacle
Connect the included 24V Power Supply to this receptacle.
HDMI Output Ports (A – H)
Connect HDTV displays to these HDMI ports.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING THE 8X8 CROSSPOINT MATRIX FOR HDMI 1.3
How To Connect The 8x8 Crosspoint Matrix For HDMI 1.3
1. Using the supplied HDMI cables, connect a Hi Def source to HDMI Input
1 on the 8x8 Crosspoint Matrix. Connect a second Hi Def source to HDMI
Input 2, and so on.
2. Connect an HDTV display to HDMI Output A on the 8x8 Crosspoint Matrix.
Connect another HDTV display to HDMI Output B, and so on.
3. Connect the included 24V DC power supply to the 8x8 Crosspoint Matrix and
plug the power cord into an available wall outlet.
4. The power button LED will turn bright red indicating that the 8x8 Crosspoint
Matrix is in standby mode.
5. Power on the displays and the source devices. Turn on the 8x8 Crosspoint
Matrix for HDMI 1.3 by pressing the power button on the front panel. A
vibrant HDTV HD picture should be seen, along with multichannel digital
audio (if the display supports audio).
NOTE: If the source and display support 3D then the 8x8 Crosspoint Matrix
for HDMI 1.3 will pass through the 3D signal. Output A must be connected
to a 3DTV.
Wiring Diagram for the 8x8 Crosspoint Matrix for HDMI 1.3
HDMI CABLE
RS-232 CABLE
CAT5 CABLE
IR
IP Control
RS-232 Controller
IR Extender
8x Hi-Def Sources
8x HD Displays
EXT-HDMI1.3-848CPN
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MATRIX
USING THE FRONT PANEL BUTTONS
How to Switch between Inputs and Outputs
The main display of the Gefen 8x8 Crosspoint Matrix for HDMI 1.3 is a sixteen-
character, two-line LCD. This display shows the current routing status
The first row represents outputs A through H on the back of the unit. The second
row represents the inputs to which each output is routed. Each input can have a
value from 1 to 8.
Routing sources to a display
1
Press the Output+ button. The display will change to show a single output
(zone) and input (source).
2
3
Press the Input+ or Input- button to change the input (source).
Press the Output+ or Output- button to cycle through each of the outputs
(zones).
4
Press the Menu button to return to the routing status screen.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
IR REMOTE DESCRIPTION
RMT-848IR Remote
1
2
1
2
LED Button Press Indicator
This LED will be activated momentarily each time a button is pressed.
Display and Source Selection Buttons
These buttons are used to select which input source is routed to the
HDTV display.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
IR REMOTE INSTALLATION
Installing the RMT-848IR Battery
1. Remove the battery cover on the back of the remote.
2. Insert the included battery into the open battery slot. The positive (+) side of
the battery should be facing up.
3. Replace the battery cover.
The remote ships with two batteries. One battery is required for operation and the
other battery is a spare.
Battery Slot
IR Code DIP Switches
11
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Resolve IR Code Conflicts
In the event that IR commands from other remote controls interfere with the
supplied IR remote, changing the remote IR channel will fix the problem. The
IR remote control has a bank of DIP switches used for setting the remote IR
channel.
The DIP switch bank on the IR remote is located underneath the battery cover.
Remote Channel 0:
Default
Remote Channel 1:
Remote Channel 3:
1
1
2
2
1
1
2
2
Remote Channel 2:
Left: Picture of the opened rear battery
compartment of the IR remote showing the
exposed DIP Switch bank between the battery
chambers.
It is important that the remote IR channel selected on the remote, matches the
IR channel set on the Gefen 8x8 Crosspoint Matrix for HDMI 1.3. For example,
if both DIP switches on the IR remote are set to IR channel 0 (toward the “1” and
“2”), the Gefen 8x8 Crosspoint Matrix for HDMI 1.3 must be set to use IR channel
0.
See page 14 on how to change the IR channel on the Gefen 8x8 Crosspoint
Matrix for HDMI 1.3.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
The IR remote control will allow the user to select which source will be routed to
which output. Each of the two (2) outputs are assigned a group of four buttons
which correspond to the four source inputs. Please use the information below
when selecting the desired source for each display.
Table of IR Remote Commands
for the Gefen 8x8 Crosspoint Matrix for HDMI 1.3
Source
Display
1
2
3
4
5
6
7
8
A
B
C
D
E
F
G
H
Routing Sources to Displays
Buttons 1 through 8 on the IR remote correspond to each HDMI input on the Matrix.
Buttons A through H correspond to each HDMI output. To route a source to a display,
press the desired input on the IR remote then press the desired output.
Example:
Route the source connected to Input 6 to Display D.
1
2
Press and release button 6 on the IR remote.
Press and release button D.
The image shown on Display 4 will be the Hi-Def source connected to HDMI In 6
on the Gefen 8x8 Crosspoint Matrix for HDMI 1.3. The number six will be displayed
under the letter D in the front panel display, indicating that Input 6 has been routed to
Display D.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE IR CHANNEL ON THE MATRIX
1. Press the Input - Input + and Output - buttons simultaneously.
2. The Main LCD Display will show the following
Use the Input + and Input - buttons to switch between OFF and ON states. Use
the table below to set the correct IR channel.
It is important that the IR setting that is selected match the DIP switch settings
on the IR remote. For example, if both DIP switches on the IR remote are set
to the down position (channel 0), the IR channel for the Matrix must be set to IR
channel 0 (“IR Address : 0, 1-OFF, 2-OFF”).
IR ADDRESS
REMOTE SW1
REMOTE SW2
0
1
2
3
OFF
ON
OFF
OFF
ON
OFF
ON
ON
Once the correct IR channel has been set, press the Menu button.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232 SERIAL INTERFACE
5 4 3 2 1
9 8 7 6
1 2 3 4 5
6 7 8 9
Only Pins 2 (RX), 3 (TX), and 5 (Ground) are used on the RS-232 serial interface
This feature allows for easy integration into automated systems capable of
transmitting RS-232 commands. Use the settings below to configure the RS-232
port of the user’s system.
Transmitting the appropriate numeric ASCII character will simulate key-presses
on the IR remote control.
Binary Table
ASCII Corresponding
RMT-848IR
Binary
ASCII
Corresponding
RMT-848IR
Button
Binary
Button
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
0011 0001
0011 0010
0011 0011
0011 0100
0011 0101
0011 0110
0011 0111
0011 1000
A
B
C
D
E
F
A
B
C
D
E
F
0110 1001
0110 0001
0110 0010
0110 0011
0110 0100
0110 0101
0110 0110
0110 0111
G
H
G
H
RS-232 Settings
Bits per second .............................................................................................19200
Data bits ............................................................................................................... 8
Parity ............................................................................................................. None
Stop bits ................................................................................................................1
Flow Control .................................................................................................. None
15
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232 COMMANDS
Simplified syntax was used for command implementation for faster operation with
the device. RS-232 commands are not case-sensitive.
Commands
Command
Description
A
Routes the specified Input to Output A
Routes the specified Input to Output B
Routes the specified Input to Output C
Routes the specified Input to Output D
Routes the specified Input to Output E
Routes the specified Input to Output F
Routes the specified Input to Output G
Routes the specified Input to Output H
Routes the specified Input to any combination of Outputs
Sets the specified Input to use Slow Switching
Displays the current Matrix status
Sets the specified Input to use Fast Switching
Reset Matrix to factory settings
B
C
D
E
F
G
H
ABCD....
L
M
Q
RS
X
Power-OFF the Matrix
Y
Power-ON the Matrix
Z0
Z1
Enable 10-bit Deep Color Support
Enable 12-bit Deep Color Support
16
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232 COMMANDS
A Command
Routes the specified Input to Output A.
Syntax:
A[no space]param1
Parameters:
param1
HDMI Input (Source)
[1 - 8]
Example:
A5routes Input 5 to Output A.
Notes:
Individual routing to other outputs (B - H) can be accomplished by using a similar
syntax and substituting the A with the range B though H. For example, to route
Input 7 to Output E, use the following command:
E[no space]7
See the table on page 16 for details.
ABCD... Multiple Routing Command
Route the specified source to any combination of Outputs.
Syntax:
param1[param1a][param1b][param1c]...param2
Parameters:
param1
param2
HDMI Output (Display)
HDMI Input (Source)
[A - H]
[1 - 8]
Example:
ABFGHroutes Input 6 to Outputs A, B, F, G, and H.
Notes:
Only one source (input) can be specified at a time.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232 COMMANDS
L Command
Sets the specified Input to use Slow Switching.
Syntax:
L[no space]param1
Parameters:
param1
HDMI Input (Source)
[1 - 8]
M Command
Returns the current routing status of the matrix in addition to the firmware
version.
Syntax:
m
Parameters:
None
Q Command
Sets the specified Input to use Fast Switching.
Syntax:
Q[no space]param1
Parameters:
param1
HDMI Input (Source)
[1 - 8]
18
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232 COMMANDS
RS Command
Reset the matrix to the default routing status (A=1, B=2, C=3, D=4, E=5, F=6,
G=7, H=8). The IR address will be set to 0.
Syntax:
rs
Parameters:
None
ST Command
The ST command displays the current routing state and the current firmware
version of firmware.
Syntax:
st
Parameters:
None
X Command
The X command turns off the Gefen 8x8 Crosspoint Matrix for HDMI 1.3.
Syntax:
Parameters:
None
19
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232 COMMANDS
Y Command
The Y command powers on the Gefen 8x8 Crosspoint Matrix for HDMI 1.3.
Syntax:
y
Parameters:
None
Z0 Command
Modifies the EDID and forces 10-bit Deep Color.
Syntax:
Z0
Parameters:
None
Z1 Command
Modifies the EDID and forces 12-bit Deep Color.
Syntax:
Parameters:
None
20
Download from Www.Somanuals.com. All Manuals Search And Download.
FAST SWITCHING
FAST SWITCHING TECHNOLOGY
Fast Switching Technology
Fast Switching Technology (FST) is a Gefen software implementation for HDMI
1.3 products. FST was created to improve the lengthy HDMI authentication
process, based on the HDMI and HDCP specifications.
FST provides quicker A/V source switching and greatly improves the overall A/V
system behavior and performance when more than one HDTV display is used in
the system setup.
FST allows connecting / disconnecting or turning ON / OFF of HDTV displays
without having these activities affect other Hi-Def sources routed to any other
HDTV display in the same system.
FAST MODE:
Setting the Matrix to FAST mode will improve performance when connecting /
disconnecting Hi-Def sources, and powering ON / OFF HDTV displays.
NOTE: When switching from SLOW mode to FAST mode, the HDTV displays
connected to the Matrix will blink momentarily.
SLOW MODE:
When set to SLOW mode, the Matrix will follow the standard authentication
process, based on the HDMI and HDCP specifications. SLOW mode is
recommended when the source does not support multiple devices.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
FAST SWITCHING
Changing between Fast Switching and Slow Switching Modes
Each HDMI input can be set to use either Fast Switching or Slow Switching. Fast
Switching should be used for the best performance.
1. Press the Menu button on the front panel.
The switching mode for each input will be displayed under each output. The
letter F indicates that the HDMI input is using Fast Switching. If the HDMI
input is set to Slow Switching, a letter S will be displayed.
2. Press the Output+ button on the front panel.
The screen will display one output and one input. The switching mode for
the input can now be changed.
3. Use the Input + and Input - button to change between Fast Switching mode
and Slow Switching mode. In the illustration below, HDMI input 1 is set to
Slow Switching.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
FAST SWITCHING
4. Once the switching mode has been set, press the Menu button to accept the
changes.
The front panel shows which inputs are set to Slow Switching and which
inputs are set to Fast Switching.
Press the Menu button again to return to the routing status screen.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
EDID MANAGEMENT
External EDID Management
The 8x8 Crosspoint Matrix for HDMI 1.3 features EDID Management. Before
the source can send video or audio signals, the source device reads the EDID
(Extended Display Identification Data) from the output devices connected to the
Splitter. The EDID contains information about what type of A/V data that the
source can send to each output device.
The 8x8 Crosspoint Matrix for HDMI 1.3 routes multiple sources to multiple
output devices. This involves reading EDID data from more than one device.
Management of the EDID data is important to maintain compatibility between all
devices.
The following EDID features are copied from Output A:
•
•
•
Supported Resolutions
3D Support
Audio Features
Display Connections:
•
•
If a device is not connected to Output A, then no EDID changes are made,
meaning that the previous EDID information will be used. This state will be
in effect until a display is connected to Output A and the Matrix is power-
cycled.
EDID is built from Output A to the Input. The audio block will be copied
from Output A. EDID-copying is performed only when the Matrix is reset or
power-cycled.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
RACK MOUNT INSTALLATION
Rack mount ears are provided for installing the Matrix in a 5U rack space. To
mount the Matrix in the rack, do the following:
1. Locate the 4 side screws on each side of the Matrix.
2. Remove these screws (located closest to the front of the Matrix).
3. Using the 4 removed screws, secure each rack ear plate onto the side of the
Matrix with the handle facing the front side of the Matrix.
4. Repeat the procedure on the opposite side of the Matrix.
5. With the front panel facing you, firmly grip both rack mounting handles and
insert the Matrix into the rack. Slide the Matrix into the rack, pushing firmly
until the Matrix will not travel any further. Secure the Matrix into the rack
using the four supplied rack mounting screws .
1.
2.
3.
4.
5.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Video Amplifier Bandwidth ....................................................................... 225 MHz
Single Link Range.....................................................................1080p / 1920x1200
Input Video Signal.....................................................................................1.2 V p-p
Input DDC Signal................................................................................5 V p-p (TTL)
RS-232 Interface.......................................................................................DB-9 (M)
Input Connectors........................................................(8) HDMI Type-A, 19-pin (M)
Output Connectors......................................................(8) HDMI Type-A, 19-pin (M)
Power Supply...............................................................................................24V DC
Power Consumption.............................................................................85 W (max.)
Dimensions.................................................................19.0” W x 7.0” H x 13.375” D
Rack mountable................................................................................5U rack space
Shipping Weight..........................................................................................24.7 lbs
26
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
Gefen warrants the equipment it manufactures to be free from defects in material
and workmanship.
If equipment fails because of such defects and Gefen is notified within two (2)
years from the date of shipment, Gefen will, at its option, repair or replace the
equipment, provided that the equipment has not been subjected to mechanical,
electrical, or other abuse or modifications. Equipment that fails under conditions
other than those covered will be repaired at the current price of parts and labor in
effect at the time of repair. Such repairs are warranted for ninety (90) days from
the day of reshipment to the Buyer.
This warranty is in lieu of all other warranties expressed or implied, including
without limitation, any implied warranty or merchantability or fitness for any
particular purpose, all of which are expressly disclaimed.
1. Proof of sale may be required in order to claim warranty.
2. Customers outside the US are responsible for shipping charges to and from
Gefen.
3. Copper cables are limited to a 30 day warranty and cables must be in their
original condition.
The information in this manual has been carefully checked and is believed to
be accurate. However, Gefen assumes no responsibility for any inaccuracies
that may be contained in this manual. In no event will Gefen be liable for
direct, indirect, special, incidental, or consequential damages resulting from
any defect or omission in this manual, even if advised of the possibility of such
damages. The technical information contained herein regarding the features and
specifications is subject to change without notice.
For the latest warranty coverage information, refer to the Warranty and Return
PRODUCT REGISTRATION
Please register your product online by visiting the Register Product page
under the Support section of the Gefen Web site.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Rev A5
20600 Nordhoff St., Chatsworth CA 91311
1-800-545-6900 818-772-9100 fax: 818-772-9120
Pb
This product uses UL listed power supplies.
Download from Www.Somanuals.com. All Manuals Search And Download.
|