Geemarc Telephone Dallas 10 User Manual

DALLAS 10  
User guide  
If you are using this telephone with a hearing aid, set your  
hearing aid to the «T» setting  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING UP  
2 - RINGER SETTINGS  
A switch located on right side allows the ringer to  
be switched On ( ) or Off ( ).  
3 - WALL MOUNTING  
To wall-mount your telephone,slide out the clip turn  
around and slide back into the wall mounting posi-  
tion (located in the base unit, just below the ear  
piece).This will ensure that the handset stays firmly  
in position. Make 2 holes in the wall 85mm apart,  
insert the wall plugs and the wall mounting screws.  
The screws should protrude from wall by 6-7 mm.  
Place the phone onto the screw-heads and slide  
down to secure.  
4 - TONE/PULSE SWITCH (T/P)  
The Tone/Pulse switch is factory pre-set to Tone  
position (T).In the UK,all telephone exchanges now  
use Tone dialing. If your phone does not dial out it  
is probably being used from an older private switch  
board (PBX). In this case, the Tone/Pulse switch  
must be moved to Pulse (P).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE PHONE  
1 -ANSWERING INCOMING CALL  
- When an incoming call is received the phone will  
ring and flash. To answer the call lift the handset  
and speak.  
- On completion of the call, carefully replace the  
handset in the cradle to release the line.  
2 - VOLUME RECEIVING ADJUSTMENT  
You can increase the volume according to your  
own hearing requirements.  
Use the VOL button, located on the right side, to  
adjust the level according to your own hearing  
requirements.  
VOL  
0dB  
+15dB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE PHONE  
3 - MAKING A CALL  
- Lift the handset.  
-Await the dial tone and dial required number.  
- On completion of the call, carefully replace the  
handset in the cradle.  
4 - SENDING LEVELADJUSTMENT  
If your voice is quiet or called parties have difficulty  
hearing you, you can increase the sending level  
volume with the switch  
located on the right  
side.  
0dB  
+4dB  
5 - LAST NUMBER REDIAL  
- Lift the handset.  
- Await the dial tone and press  
button.  
- The previously dialled number will be automaticaly  
redialled (not in use for memory numbers).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE PHONE  
6 - R, * & # BUTTONS  
These are used with the new services provided on  
digital exchanges. For details please contact your  
network operator.  
7 - STORING TELEPHONE NUMBERS  
Your phone can store 3 direct and 10 indirect  
memories (16 digits maximum for each memory).  
- Lift the handset.  
- Press  
- Dial the telephone number you wish to store.  
- Press button.  
button.  
- Press one of the direct memory buttons, M1, M2,  
M3.  
Or press MEM and any button 0 to 9 on the key  
pad under which you wish to store the telephone  
number in indirect memory.  
- Replace the handset.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE PHONE  
Note : Numbers will be lost if you disconnect your  
phone. Entering a new number in memory will  
automatically erase the previous number.  
8 - DIALLING STORED NUMBER  
- Lift the handset and await the dial tone.  
- Press appropriate direct memory button M1, M2,  
or M3. The stored number will be dialled out  
automatically.  
Or press the MEM button followed by the keypad 0  
to 9 button under which the desired number is  
stored. The stored number will be dialled out  
automatically.  
To register your stored phones numbers, use the  
index located on the base.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GUARANTEE  
From the moment your Geemarc product is purchased, Geemarc  
guarantee it for the period of one year. During this time, all repairs  
or replacements (at our option) are free of charge.Should you  
experience a problem then contact our helpline or visit our website  
negligence or breakages to any parts. The product must not be  
tampered with or taken apart by anyone who is not an authorised  
Geemarc representative.The Geemarc guarantee in no way limits  
your legal rights.  
IMPORTANT: YOUR RECEIPT IS PART OF YOUR GUARANTEE  
AND MUST BE RETAINED AND PRODUCED IN THE EVENT  
OFAWARRANTY CLAIM  
Please note: The guarantee applies to the United Kingdom only.  
Declaration : Hereby Geemarc Telecom SA declares that this product is in  
compliance with the essential requirements and other relevant provisions of  
the Radio and Telecommunications Terminal Equipment Directive 1999/5/EEC  
and in particular article 3 section 1a, 1b and section 3.  
Telephone connection : Voltages present on the telecommunication network  
are classified TNV-3 (Telecommunication Network Voltage) according to the  
EN60950 standard.  
For product support and help visit our website  
telephone 01707 384438  
or fax 01707 372529  
UGDAL10 ED01  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Escort Radar Detector SR7 User Manual
Euro Pro Vacuum Cleaner V1925H User Manual
Everpure Water System EV9259 14 User Manual
Excalibur electronic Calculator BarMaster User Manual
Fisher Price Baby Furniture G2808 User Manual
Fisher Price Sleep Apnea Machine BCG43 User Manual
Frigidaire Dishwasher FDB956RB User Manual
Fujitsu Network Card PCI GigabitEthernet 30 User Manual
Garland Griddle CG 48F User Manual
GE Freezer FUM9SM User Manual