Gateway DVD Player AD 520 User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.  
Front panel controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Using S-Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Pausing a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Using frame advance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Skipping a chapter, track, or file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Speeding up disc playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Slowing down DVD playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Using the on-screen display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
i
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the subtitle language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49  
Cleaning and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62  
A Using Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67  
Using DVD video discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68  
Region code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68  
Markings on DVD video packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68  
ii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using MP3 discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69  
Recording an MP3 disc using a CD-R/CD-RW disc . . . . . . . . . . . . . . . . . . . . 69  
Copying discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69  
B Safety, Regulatory, and Legal Information . . . . . . . . . . . . . . . . . . . . . . 71  
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Checking Out  
Your Gateway  
DVD Player 1  
This chapter provides basic information about your  
Gateway DVD Player.  
Read this chapter to learn about:  
Features  
Warnings and safeguards  
Package contents  
DVD controls and connections  
Remote control  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 1: Checking Out Your Gateway DVD Player  
Features  
Plays DVD, DVD-R/RW, DVD+R/RW, CD, CD-R/W, MP3, HDCD, JPEG,  
Kodak® Photo CD, VCD, SVCD discs.  
Analog and digital audio outputs.  
Composite, S-Video, and component video outputs.  
Interlace or progressive scan video when using component video.  
Audio Dynamic Range Compression when playing videos recorded with  
Dolby Digital sound.  
Parental lock feature.  
Multiple angles and zoom.  
Play songs on audio discs in a random order or an order you specify.  
Bookmark your favorite movie scene or song location and start play at that  
location.  
Start play at a DVD title or chapter number, or DVD or CD elapsed time.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
                       
Important Safeguards  
Important Safeguards  
Warning  
Risk of electric shock - Do not open the case  
To reduce the risk of electric shock, do no remove the  
cover. There are no user-serviceable parts inside.  
Removing the cover voids the warranty.  
Have your DVD player repaired by qualified service  
personnel only.  
Warnings and precautions  
Disconnect all cables before moving your DVD player. Moving your DVD  
player with its cables attached may damage the cables and cause fire or  
electric shock danger.  
Do not expose your DVD player to rain or moisture.  
Keep your DVD player away from excessive dust, high temperatures,  
moisture, or direct sunlight.  
Use your DVD player in a well-ventilated area and do not cover the  
ventilation openings.  
output cable, or you may experience excessive interference.  
Disconnect your DVD player and unplug the power cord when not used  
for a long period of time.  
For more safety information, see “Important safety information” on  
page 71.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 1: Checking Out Your Gateway DVD Player  
Package contents  
Along with your DVD player, the packaging box contains the following items:  
Remote control  
Two AAA  
batteries  
RCA audio cable  
(red and white  
plugs)  
RCA composite  
video cable  
(yellow plug)  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Package contents  
Coaxial audio  
cable (orange  
plug)  
User guide  
You can purchase these optional accessories for your DVD player:  
RCA component video cable  
S-Video cable  
AC-3 (Toslink) cable  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Chapter 1: Checking Out Your Gateway DVD Player  
Front  
Power  
button  
Standby Disc tray  
indicator  
Display  
Front  
Remote  
Front  
Component  
Description  
Power button  
Press to turn the player off or to standby. For more information, see  
“Turning the DVD player on and off” on page 31.  
Standby indicator  
Disc tray  
Lights when the DVD player is in standby.  
Insert a CD or DVD into this tray. For more information about types of  
discs supported, see “Using Discs” on page 67.  
Display  
For more information, see “Display” on page 8.  
For more information, see “Front panel controls” on page 7.  
Accepts signals from the remote control.  
Front panel controls  
Remote sensor  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Front  
Front panel controls  
Open/Close  
Search back  
Play  
Stop  
Search ahead  
Skip back  
Step/Pause  
Skip ahead  
Button  
Icon  
Description  
Open/Close  
Search back  
Opens and closes the disc tray.  
Plays the CD, DVD, or MP3 disc backward quickly. For more  
information, see “Speeding up disc playback” on page 36.  
-OR-  
Search ahead  
Skip back  
information, see “Speeding up disc playback” on page 36.  
-OR-  
Plays the DVD disc forward in slow motion. For more information,  
see “Slowing down DVD playback” on page 36.  
Skips back one CD track, DVD chapter, or MP3 file. For more  
information, see “Skipping a chapter, track, or file” on page 35.  
Note: if you press the skip back button after the track, chapter,  
or file playback has reached the half-way point, the skip back  
button skips to the beginning of the current track, chapter, or file.  
Press the button a second time to skip back to the previous track,  
chapter, or file.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Chapter 1: Checking Out Your Gateway DVD Player  
Button  
Icon  
Description  
Skip ahead  
Skips ahead one CD track, DVD chapter, or MP3 file. For more  
information, see “Skipping a chapter, track, or file” on page 35.  
Play  
a disc” on page 31.  
Stop  
Stops play. For more information, see “Stopping a disc” on page 34.  
Step/Pause  
Pauses play. If you are playing a DVD, you can push this button to  
advance the video by one frame. For more information, see “Pausing  
a disc” on page 34 and “Using frame advance” on page 35.  
Display  
Play status indicators  
Play/Pause indicator  
Program indicator  
Progressive indicator  
DVD video indicator  
CD indicator  
MP3 indicator  
Random play indicator  
Repeat indicators  
Multi-information display  
Component  
Description  
Play/Pause indicator  
Program indicator  
Indicates whether the disc is playing or has been paused.  
Indicates the player is playing songs on the CD in an order you  
programmed instead of in the order they appear on the CD. For more  
information, see “Playing tracks in a specific order” on page 45.  
Progressive indicator  
Play status indicator  
progressive scan. For more information, see “Changing the component  
video output signal” on page 52.  
Indicates the player is playing a disc faster or slower than normal and  
whether the disc is being played forward or backward. For more  
information, see “Speeding up disc playback” on page 36 and “Slowing  
down DVD playback” on page 36.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
Front  
Component  
Description  
Repeat indicators  
Shows the current repeat mode. For more information, see “Repeating  
playback” on page 42.  
Random play indicator  
Shows the current playback mode. For more information, see “Playing  
songs in random order” on page 44.  
Multi-information  
display  
Shows the following information:  
Current DVD title number  
Current DVD chapter number  
Current CD track number  
Elapsed time since the DVD title, CD track, or MP3 file started playing  
DVD video indicator  
CD indicator  
Indicates a DVD video is playing.  
Indicates a CD is playing.  
MP3 indicator  
Indicates an MP3 disc is playing.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Chapter 1: Checking Out Your Gateway DVD Player  
Back panel connections  
Composite  
video out  
COAX  
audio out  
Audio out  
Component  
video out  
S-Video out Optical  
audio out  
Connector  
Description  
Connects to a composite video device.  
Composite video Out  
COAX audio out  
Audio Out  
Connects to a coaxial digital audio device.  
Connects to an analog stereo audio device.  
Connects to a component video device.  
Connects to an S-Video device.  
Component video out  
S-Video Out  
Optical audio out  
Connects to an AC-3 (Toslink) digital audio device.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
Remote control  
Power button  
For more information,  
see page 11.  
Numeric keypad and  
zoom button  
For more information,  
see page 13.  
Basic player controls  
For more information,  
see page 12.  
Cursor controls and  
menu buttons  
For more information,  
see page 13.  
Language menu and  
video output buttons  
For more information,  
Skip, search, and  
step/pause buttons  
For more information,  
see page 14.  
Buttons  
Buttons  
Function  
Power button  
Power On. Turns the DVD player to standby mode from  
off or turns the DVD player off.  
Remote LED. Blinks when the remote is sending a signal  
to your DVD player.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Chapter 1: Checking Out Your Gateway DVD Player  
Buttons  
Function  
Basic player controls  
Open/Close ( ). Opens or closes the DVD tray.  
bookmark. For more information, see “Using bookmarks”  
on page 47.  
NTSC/PAL. Switches your output from NTSC, which is  
is the television standard for Europe and Asia. For more  
information, see “Changing the video signal format” on  
page 51.  
Angle. Switches camera angles for DVD videos  
recorded with multiple camera angles. For more  
information, see “Changing the camera angle” on  
page 50.  
Random. Plays CD tracks or MP3 files in random order.  
For more information, see “Playing songs in random  
order” on page 44.  
Clear. Clears the list of programmed CD tracks. For more  
information, see “Clearing programmed tracks” on  
page 46.  
P.Mode. Creates a list of programmed CD tracks. For  
more information, see “Playing tracks in a specific order”  
on page 45.  
Repeat. Repeats a DVD chapter or title, CD tracks or  
disc, or MP3 folders or files. For more information, see  
“Repeating playback” on page 42.  
A< >B. Repeats a section of a DVD or CD. For more  
information, see “Repeating a section of a DVD or CD”  
on page 42.  
Display. Shows the on-screen display. For more  
information, see “Using the on-screen display” on  
page 37.  
Dimmer. Adjusts the display brightness. For more  
information, see “Adjusting the display brightness” on  
page 52.  
Play ( ). Plays the disc. For more information, see  
“Playing a disc” on page 31.  
Stop ( ). Stops playing the disc. For more information,  
see “Stopping a disc” on page 34.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                           
Remote control  
Buttons  
Function  
Numeric keypad and zoom button  
Number button pad. Selects a menu item or enters a  
password.  
+10. Adds 10 to the number you selected.  
Zoom. Enlarges a part of the DVD screen.  
Language menu and video output  
buttons  
Multiplex. This function is not available on this DVD  
player.  
Audio. Opens the Audio menu. For more information,  
Subtitle. Opens the Subtitle menu. For more  
information, see “Changing the subtitle language” on  
page 49.  
P.Scan. Changes the video output from interlace  
television to progressive scan. For more information, see  
page 52.  
Cursor controls and menu buttons Setup. Opens the on-screen display (OSD) menus. For  
more information, see “Using the Setup menu” on  
page 54.  
Menu. Opens a DVD menu. For more information, see  
“Accessing additional DVD menus” on page 41.  
,
,
,
. Navigates the setup menus. For more  
information, see “Using the Setup menu” on page 54.  
Title/PBC. Opens the DVD title menu. For more  
information, see “Accessing the DVD title menu” on  
page 40.  
Return. Returns from a setup menu to the Main Setup  
Menu. For more information, see “Using the Setup  
menu” on page 54.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                           
Chapter 1: Checking Out Your Gateway DVD Player  
Buttons  
Function  
Skip, search, and step/pause  
buttons  
Skip back ( ). Skips back one CD track, DVD chapter,  
or MP3 file. For more information, see “Skipping a  
chapter, track, or file” on page 35.  
Note: if you press the skip back button after the track,  
the current track, chapter, or file. Press the button a  
second time to skip back to the previous track,  
chapter, or file.  
chapter, or MP3 file. For more information, see “Skipping  
a chapter, track, or file” on page 35.  
Search back ( ). Plays the CD, DVD, or MP3 disc  
disc playback” on page 36 and “Slowing down DVD  
playback” on page 36.  
Search ahead ( ). Plays the CD, DVD, or MP3 disc  
playback” on page 36 and “Slowing down DVD playback”  
on page 36.  
Step/Pause ( ). Pauses play. If you are playing a DVD,  
you can push this button to advance the video by one  
frame. For more information, see “Pausing a disc” on  
page 34 and “Using frame advance” on page 35.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Remote control  
Inserting batteries  
To install the batteries:  
Insert two AAA batteries into the remote control. Make sure that you match  
the + and – on the batteries with the + and – symbols inside the battery  
compartment.  
Warning  
Do not use rechargeable Ni-Cd batteries in this remote  
control.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 1: Checking Out Your Gateway DVD Player  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Your  
DVD Player  
2
Read this chapter to learn how to connect your DVD player  
to:  
A receiver or A/V amplifier  
A television  
Important  
Do not plug the power cord into a wall outlet  
or turn the DVD player on until all  
connections have been made.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 2: Connecting Your DVD Player  
Understanding video connections  
Your DVD player has three types of standard video connections. You should  
use the best connection available to get the best display. For example, if your  
television supports a component video connection, connect the DVD player  
to your television using component video instead of composite video or  
S-Video.  
Connection Cable and Connector  
Quality  
Description  
Good  
Composite. The video signal is carried  
through a single “pin.” This connection  
method is the one that is most commonly  
found on devices.  
Better  
S-Video. The video signal is split into two  
signals, black-and-white and color. Text  
displayed on-screen through this  
connection will be noticeably sharper then  
composite.  
Best  
Component. The video signal is split into  
three signals, two color, and one  
black-and-white. Use component video to  
take advantage of the superior picture  
provided by progressive scan DVD.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Understanding audio connections  
Understanding audio connections  
Your DVD player has three types of standard audio connections. You should  
use the best connection available to get the best sound. For example, if your  
receiver supports a digital audio connection, connect the DVD player to your  
receiver using digital audio instead of analog stereo audio.  
Connection Cable and Connector  
Quality  
Description  
Good  
RCA Analog Stereo  
The audio signal is carried through two  
cables, one for the right speaker and one for  
the left. This connection method is the one  
that is most commonly found on devices.  
Best  
Use digital audio for the best sound quality.  
Your DVD player supports the following  
digital audio connections.  
Coaxial Digital  
Coaxial cables are commonly used with  
digital audio signals. A coaxial cable with  
RCA terminations has been included with  
your DVD player.  
-OR-  
AC-3 (Toslink) Digital  
Toslink is a connector format for fiber optic  
digital audio cables. A fiber optic digital  
audio cable carries audio data in the form of  
light impulses instead of electrical signals.  
The Toslink connector is a square plug.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 2: Connecting Your DVD Player  
Connecting to a receiver  
Using component video  
To connect your DVD player to a receiver using component video:  
or  
1 Connect the green-colored Y jack on the back of your DVD player to the  
green-colored Y jack on your receiver.  
2 Connect the red-colored CR jack on the back of your DVD player to the  
red-colored PR or CR jack on your receiver.  
3 Connect the blue-colored CB jack on the back of your DVD player to the  
blue-colored PB or CB jack on your receiver.  
4 Connect the AC-3 toslink digital audio jack on the back of your DVD player  
to the AC-3 toslink digital audio in jack on your receiver.  
-OR-  
Connect the coaxial out jack on the back of your DVD player to the coaxial  
in jack on your receiver.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Connecting to a receiver  
5 Connect your receiver to the television. For more information, see the  
user’s guides that came with your receiver and television.  
6 Plug the power cord into a wall outlet.  
Important  
You need to configure the DVD player for digital audio  
output. For more information, see “Audio Setup” on  
page 57.  
You may also need to configure your receiver for digital  
audio input. For more information, see the user’s guide that  
came with your receiver.  
Using S-Video  
To connect your DVD player to a receiver using S-Video:  
or  
1 Connect the S-Video jack on the back of your DVD player to the S-Video  
jack on your receiver.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 2: Connecting Your DVD Player  
2 Connect the AC-3 toslink digital audio jack on the back of your DVD player  
to the AC-3 toslink digital audio in jack on your receiver.  
-OR-  
Connect the coaxial out jack on the back of your DVD player to the coaxial  
in jack on your receiver.  
3 Connect your receiver to the television. For more information, see the  
user’s guides that came with your receiver and television.  
4 Plug the power cord into a wall outlet.  
Important  
You need to configure the DVD player for digital audio  
output. For more information, see “Audio Setup” on  
page 57.  
You may also need to configure your receiver for digital  
audio input. For more information, see the user’s guide that  
came with your receiver.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to a receiver  
Using composite video  
To connect your DVD player to a receiver using composite video:  
1 Connect the yellow video jack on the back of your DVD player to the  
yellow video jack on your receiver.  
2 Connect the red (R) and white (L) audio jacks on the back of your DVD  
player to the R and L audio-in jacks on your receiver.  
3 Connect your receiver to the television. For more information, see the  
user’s guides that came with your receiver and television.  
4 Plug the power cord into a wall outlet.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 2: Connecting Your DVD Player  
Connecting to a television  
Using component video  
To connect your DVD player to a television using component video:  
1 Connect the green-colored Y jack on the back of your DVD player to the  
green-colored Y jack on your television.  
2 Connect the red-colored CR jack on the back of your DVD player to the  
red-colored PR or CR jack on your television.  
3 Connect the blue-colored CB jack on the back of your DVD player to the  
blue-colored PB or CB jack on your television.  
4 Connect the red (R) and white (L) audio jacks on the back of your DVD  
player to the R and L audio-in jacks on your television.  
-OR-  
Connect the audio jacks on the back of your DVD player to a receiver. For  
more information, see “Connecting to a receiver” on page 20.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Connecting to a television  
5 Plug the power cord into a wall outlet.  
6 Select Component as the input for your television. For more information,  
see the user’s guide that came with your television.  
Using S-Video  
To connect your DVD player to a television using S-Video:  
1 Connect the S-Video jack on the back of your DVD player to the S-Video  
jack on your television.  
2 Connect the red (R) and white (L) audio jacks on the back of your DVD  
player to the R and L audio-in jacks on your television.  
-OR-  
Connect the audio jacks on the back of your DVD player to a receiver. For  
more information, see “Connecting to a receiver” on page 20.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 2: Connecting Your DVD Player  
3 Plug the power cord into a wall outlet.  
4 Select Auxiliary or AV as the input for your television. For more  
information, see the user guide that came with your television.  
Using composite video  
To connect your DVD player to a television using composite video:  
1 Connect the yellow video jack on the back of your DVD player to the  
yellow video jack on your television.  
2 Connect the red (R) and white (L) audio jacks on the back of your DVD  
player to the R and L audio-in jacks on your television.  
-OR-  
Connect the audio jacks on the back of your DVD player to a receiver. For  
more information, see “Connecting to a receiver” on page 20.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting to a television  
3 Plug the power cord into a wall outlet.  
4 Select Auxiliary or AV as the input for your television. For more  
information, see the user guide that came with your television.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Connecting Your DVD Player  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the DVD  
Player  
3
Read this chapter to learn how to:  
Turn the DVD player on and off  
Play a disc  
View the on-screen display  
Access DVD menus  
Repeat playback  
Change the order in which songs are played  
Use bookmarks  
Change the audio and subtitle languages  
Change the camera angle  
Zoom in on a scene  
Change video signals  
Adjust the display brightness  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 3: Using the DVD Player  
DVD player basics  
Invalid operation symbol  
If you press a button on the player and the player does not respond, the  
icon  
may appear on the television screen to indicate an invalid operation. An invalid  
operation may occur if:  
The button you pressed cannot be used in the current player mode.  
The region code number of the player is different from that of the DVD  
disc and playback is not allowed.  
The parental rating level does not allow playback of the video. For more  
information, see “Ratings Setup” on page 57.  
A disc is not playable.  
Supported disc types  
This DVD player can play only the discs bearing either the  
or  
marks and CD-R or CD-RW discs recorded with Audio CD or MP3 format.  
This player cannot play discs (such as CD-ROM or DVD-RAM) other than  
those listed above. Playing them may generate noise and damage speakers.  
This player cannot play CD-Rs and CD-RWs that include unreadable file  
formats such as data files.  
Depending on the disc characteristics or recording condition, some of MP3  
discs may not be played back.  
This player conforms to the NTSC color system for United States and  
Canada.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Turning the DVD player on and off  
Turning the DVD player on and off  
To turn the DVD player on:  
1 Press the power button on the DVD player. The DVD player enters Standby  
mode. Each subsequent press of the power button on the DVD player  
switches the DVD player between Standby mode and off.  
2 Press the power button  
on the remote control. The DVD player turns  
on. Each subsequent press of the power button on the remote control  
switches the DVD player between Standby mode and on.  
To turn the DVD player off:  
Press the power button on the DVD player. The DVD player turns off.  
To play a disc:  
1 Turn on the DVD player by following the instructions in “Turning the DVD  
player on and off” on page 31.  
2 Press  
on the DVD player or remote control. The DVD tray opens.  
3 Place the CD or DVD in the tray with the label up.  
4 Press  
on the DVD player or remote control. The DVD tray closes.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Chapter 3: Using the DVD Player  
5 If you are playing a DVD without a menu or a CD, press (play) on the  
DVD player or remote control.  
-OR-  
If you are playing a DVD with a menu, see “Using the DVD menu” on  
page 32.  
-OR-  
If you are playing an MP3 disc, see “Using the MP3 disc menu” on page 33.  
Using the DVD menu  
Many DVD videos include additional material along with the program. To  
access this material, or to start playing the video, you make a selection from  
the DVD menu.  
SCENE SELECTION  
SET UP  
PLAY  
SNEAKS  
To play a DVD video using the DVD menu:  
1 Turn on the DVD player and insert a DVD by following the instructions  
in “Playing a disc” on page 31.  
2 Use the remote control cursor buttons  
,
,
, and  
to highlight the  
menu item you want to select.  
3 Press ENTER or  
(play).  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Playing a disc  
Important  
If the menu items have numbers next to them, you can use  
the numeric buttons on the remote control.  
Example:  
To select the number 3, press 3.  
To select the number 21, press +10, +10, then 1.  
After selecting the number, press ENTER or  
(play).  
Using the MP3 disc menu  
The DVD player provides a navigational menu that lets you browse to a specific  
folder on an MP3 disc and begin play at a specific MP3 file.  
Root menu  
Folder and  
file menu  
To play an MP3 disc using the menu:  
1 Turn on the DVD player and insert an MP3 disc by following the  
instructions in “Playing a disc” on page 31.  
2 Use the remote control cursor buttons and to select the folder and file  
menu.  
3 Use the remote control cursor buttons  
4 Press ENTER or (play).  
and  
to select the folder or file.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 3: Using the DVD Player  
Stopping a disc  
To stop playing a disc:  
Press  
(stop) on the DVD player or remote control. The disc stops.  
Important  
When you stop playing a DVD video in this fashion, the  
player remembers the point where the stop button was  
pressed. R-STOP appears on the display.  
Press the Play button and the DVD resumes playing from  
this point.  
-OR-  
Press the stop button again, and the resume function is  
cancelled. STOP appears on the display.  
Pausing a disc  
To pause playback:  
Press  
(pause) on the DVD player or remote control. The disc pauses. If  
you are playing a DVD, the player is in Still Picture mode. If you are playing  
a CD or MP3 disc, the player is in Pause mode.  
To resume playing the disc, press (play) on the DVD player or remote  
control.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
Playing a disc  
Using frame advance  
To frame advance a DVD video:  
1 Pause the DVD video as described in “To pause playback:” on page 34.  
2 Press (pause) on the DVD player or remote control. Each time the  
is  
pressed, the disc advances one frame.  
To resume playing the disc, press (play) on the DVD player or remote  
control.  
Skipping a chapter, track, or file  
To skip ahead or back while playing a disc:  
Press  
(skip ahead) on the DVD player or remote control to skip ahead  
one DVD chapter or one track or file on a CD or MP3 disc.  
-OR-  
Press  
(skip back) on the DVD player or remote control to skip back one  
DVD chapter or one track or file on a CD or MP3 disc.  
Important  
When you press the skip back button after reaching  
midway through a chapter or track, playback returns to the  
beginning of that chapter or track. When you press it a  
second time, a chapter or track is skipped.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Chapter 3: Using the DVD Player  
Speeding up disc playback  
To speed up playback of a disc:  
Press  
(search back) or  
(search ahead) on the remote control while the  
disc is playing. Each time the button is pressed, the disc is advanced or  
reversed at up to six step speeds, depending on the type of disc.  
For CDs, the available speeds are 2X, 4X, 6X, and 8X.  
For MP3 discs, the available speed is 8X.  
For DVD videos, the available speeds are 2X, 4X, 8X, 16X, 32X, and  
64X.  
To resume normal playback, press (play) on the DVD player or remote  
control.  
Slowing down DVD playback  
To slow down playback of a DVD video:  
1 Pause the DVD video as described in “Pausing a disc” on page 34.  
2 Press  
(search back) or  
(search ahead) on the remote control. Each time  
the button is pressed, the disc is advanced or reversed slowly at three step  
speeds (1/2X, 1/4X, 1/8X). Pressing the button a fourth time returns to  
normal speed.  
To resume normal playback, press (play) on the DVD player or remote  
control.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Using the on-screen display  
Using the on-screen display  
The DVD player features an on-screen display that you can use to view disc  
information. You can use the remote control to view the on-screen display.  
To view disc information:  
Press DISPLAY on the remote control. The information is displayed on the  
television screen.  
Each time the button is pressed, the disc information changes depending on  
the type of disc being played.  
Title/chapter search mode  
TITLE 01/07 CHAPTER 001/012  
Current titles  
Total titles  
Total chapters  
Current chapters  
_ _:_ _:_ _  
Title/time search mode  
TITLE PLAYING  
00:16:25  
Elapsed time of the title  
TITLE REMAIN  
01:37:32  
Remaining time of the title  
Elapse time of the chapter  
Remaining time of the chapter  
CHAPTER PLAYING  
00:00:17  
CHAPTER REMAIN  
00:01:55  
AUDIO 1/3: AC-3 5.1 ENGLISH  
SUBTITLE 01/02 ENGLISH  
Audio/subtitle language  
Repeat playback mode  
Display off  
:
REPEAT OFF  
OFF  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Chapter 3: Using the DVD Player  
Time search mode  
GO TO _ _:_ _  
TRACK TIME  
00:00:22  
Elapsed time of the track  
Remaining time of the track  
Remaining time of the disc  
TRACK REMAIN  
00:02:01  
TOTAL REMAIN  
00:70:16  
REPEAT OFF  
PGM OFF  
RANDOM OFF  
Playback modes  
OFF  
Display off  
FILE PLAYING  
00:00:34  
00:04:25  
Elapsed time of the file  
FILE REMAIN  
OFF  
Remaining time of the file  
Display off  
Important  
Some discs may not allow some or all of the information  
to be displayed.  
Using search mode  
You can specify the section you want the DVD player to start playing from.  
You can start playback at a particular title, chapter number, or specific elapsed  
time from the beginning of the current DVD title or the current CD track.  
Important  
The information in this section only applies to DVD video  
and CD discs.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using the on-screen display  
To start play at a particular DVD title or chapter number:  
1 Press DISPLAY on the remote control. The DVD player is in Title/chapter  
search mode.  
2 Select a title or chapter number by pressing the numeric buttons on the  
remote control.  
Example:  
To select the number 3, press 3.  
To select the number 11, press +10, 1.  
Important  
If you enter an incorrect number, press the CLEAR button  
on the remote control. All numbers will be cleared.  
3 Press ENTER or  
(play).  
To start play at a particular DVD title or CD track elapsed time:  
1 Press DISPLAY on the remote control. The DVD player is in Title/chapter  
search mode.  
2 Press the remote control cursor buttons and to switch between  
Title/chapter search mode and Title/time search mode.  
3 Select the elapsed time by pressing the numeric buttons on the remote  
control.  
Example:  
To enter 3 minutes, 15 seconds, press 0, 0, 0, 3, 1, 5.  
To enter 2 hours, 59 minutes, 35 seconds, press 0, 2, 5, 9, 3, 5.  
4 If you are playing a DVD, press ENTER or (play).  
-OR-  
If you are playing a CD, the CD begins play automatically.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Chapter 3: Using the DVD Player  
Accessing DVD menus  
Important  
The information in this section only applies to DVD video  
discs.  
Accessing the DVD title menu  
You can use the remote control to return to the title menu while a DVD is  
playing.  
SCENE SELECTION  
SET UP  
PLAY  
SNEAKS  
DISK TWO PREVIEW  
To show the title menu while playing a DVD:  
1 While playing a DVD, press TITLE/PBC on the remote control. The title  
menu opens.  
2 Press the remote control cursor buttons  
,
,
, and  
to highlight the  
menu item you want to select.  
3 Press ENTER or  
(play) to play the selected item.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Accessing DVD menus  
Accessing additional DVD menus  
Some DVD videos have additional menus other than the title menu. You can  
use the remote control to access these menus while the DVD is playing.  
FILM & AUDIO  
CAPTIONS  
DVD CREDITS  
RETURN TO FILM  
MAIN MENU  
To show a DVD menu while playing a DVD:  
1 While playing a DVD, press MENU on the remote control. The menu opens.  
2 Press the remote control cursor buttons  
,
,
, and  
to highlight the  
menu item you want to select.  
3 Press ENTER or  
(play) to play the selected item.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Chapter 3: Using the DVD Player  
Repeating playback  
Repeating a chapter, title, track, or disc  
To repeat a chapter, title, track, or disc (DVD Video/CD only):  
While playing a DVD or CD, press REPEAT on the remote control. The  
repeat mode appears on the television and the display.  
Each time this button is pressed, the repeat mode changes depending on  
the disc type.  
For DVD video: Repeat Chapter, Repeat Title, Repeat Off  
For CD: Repeat Track, Repeat Disc, Repeat Off  
To return to normal playback, press REPEAT repeatedly until Repeat Off  
appears on the television or Repeat disappears from the display.  
Repeating a section of a DVD or CD  
To repeat a selected part of a DVD video or CD:  
1 While playing a DVD or CD, press A< >B on the remote control at the  
beginning of the part you want to repeat. A TO B SET A appears on the  
television screen.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                     
Repeating playback  
2 At the end of the part, press A< >B on the remote control.  
A TO B SET B appears on the television screen, Repeat appears on the  
display, and the selected part is played back repeatedly. To return to normal  
playback, press A< >B on the remote control repeatedly until A TO B  
CANCELLED is displayed on the television or Repeat disappears from the  
display.  
Important  
You cannot use the A< >B playback of a part that includes  
multiple camera angles.  
Repeat A<>B playback only works within a title or a track.  
Repeating a file or folder  
To repeat a file or folder (MP3 disc only):  
1 With the disc stopped, press REPEAT on the remote control.  
Each time this button is pressed, the repeat mode changes:  
File repeat  
Folder repeat  
Normal playback of the disc  
Disc scan playback (the first ten seconds of each file is played back)  
Normal playback of a file  
Normal playback of a folder  
2 Press the remote control cursor buttons and to select the folder and  
file menu.  
3 Press the remote control cursor buttons  
and  
to select the folder or file.  
4 Press ENTER or  
(play) to play the selected file.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Chapter 3: Using the DVD Player  
Playing songs in random order  
Important  
The information in this section only applies to CD and MP3  
discs.  
Playing CD tracks in random order  
To play CD tracks in random order:  
1 With the disc stopped or playing, press RANDOM on the remote control.  
The selected playback mode appears on the display and television.  
Each time this button is pressed, the playback mode changes:  
Random on - random playback. Tracks on the disc are played back in  
random order  
Random off - normal playback.  
2 Press ENTER or  
(play) to play the selected track.  
Playing MP3 files in random order  
To play MP3 files in random order:  
1 With the disc stopped, press RANDOM on the remote control. The selected  
playback mode appears on the display and television.  
Each time this button is pressed, the playback mode changes:  
Random on - random playback. Files in the current folder are played  
back in random order  
Random off - normal playback.  
2 Press the remote control cursor buttons and to select the folder and  
file menu.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
Playing tracks in a specific order  
3 Press the remote control cursor buttons  
and  
to select the folder or file.  
4 Press ENTER or (play) to play the selected file.  
Playing tracks in a specific order  
Important  
The information in this section only applies to CD discs.  
Up to 99 tracks can be programmed to be played in any  
specified order.  
Playing tracks in a specific order  
To play tracks in a specific order:  
1 With the disc stopped, press P.MODE on the remote control. The Program  
mode appears on the display and television.  
2 Select a track by pressing the numeric buttons on the remote control.  
Example:  
To select the number 3, press 3.  
To select the number 21, press +10, +10, 1.  
3 Repeat Step 2 for all the tracks you want to play.  
4 Press ENTER or  
(play) to play the selected tracks.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Chapter 3: Using the DVD Player  
Clearing programmed tracks  
Caution  
Opening the disc tray or turning off the power clears all  
programmed tracks.  
To clear the programmed tracks one by one:  
During programming, press CLEAR.  
Each time this button is pressed, the programmed tracks are cleared one  
by one in the opposite order. Once you have played the tracks, you cannot  
clear the programmed tracks one by one.  
To clear all programmed tracks:  
During programming or after pressing  
(stop), press P.MODE. All  
programmed tracks are cleared.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Using bookmarks  
Using bookmarks  
The bookmark feature lets you mark a point in a movie or song that you can  
go to quickly. The player stores up to 14 bookmarks.  
Important  
The information in this section only applies to DVD video  
and CD discs. Some discs will not allow the bookmark  
feature to function.  
Caution  
Opening the disc tray or turning off the power clears all  
stored bookmarks.  
Setting a bookmark  
To store a bookmark in memory:  
1 While playing a DVD or CD, press BOOK MARK on the remote control. The  
bookmark menu appears on the television (and not on the display).  
2 Use the remote control cursor buttons and to select the Mark mode.  
Each time the cursor buttons are pushed, the mode switches from Mark  
mode to GoTo mode.  
3 Use the remote control cursor buttons  
and  
to select the bookmark  
number.  
4 At the desired place in the DVD or CD, press ENTER on the remote control.  
The bookmark is stored in memory. If the Enter button is pressed at a  
previously used bookmark number, the new bookmark replaces the old  
bookmark.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
Chapter 3: Using the DVD Player  
Starting play at a bookmark  
To start play at a bookmark:  
1 While playing a DVD or CD, press BOOK MARK on the remote control. The  
bookmark menu appears on the television (and not on the display).  
2 Use the remote control cursor buttons and to select the Mark mode.  
Each time the cursor buttons are pushed, the mode switches from Mark  
mode to Recall mode.  
3 Use the remote control cursor buttons  
and  
to select the bookmark  
number you want to recall.  
4 Press ENTER on the remote control. Playback resumes from the scene or  
point corresponding to the selected bookmark.  
Changing the audio language  
Important  
The information in this section only applies to DVD video  
discs with more than one language recorded on them.  
To change the audio language:  
While playing a DVD, press AUDIO on the remote control. The audio  
language menu appears on the television. Each time this button is pressed,  
the audio language changes to the next language available on the DVD.  
Important  
When the power is turned off and on or the disc is changed,  
the language played is the one selected in the settings  
menu. For more information, see “Setup menus and  
options” on page 55. If this language is not available on  
the disc, only an available language on the disc is played.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
Changing the subtitle language  
Changing the subtitle language  
Important  
The information in this section only applies to DVD video  
discs with more than one subtitle language recorded on  
them.  
To change the subtitle language:  
While playing a DVD, press SUBTITLE on the remote control. The subtitle  
language menu appears on the television. Each time this button is pressed,  
the subtitle language changes to the next language available on the DVD.  
Important  
Important  
When the power is turned off and on or the disc is changed,  
the language played is the one selected in the settings  
menu. For more information, see “Setup menus and  
options” on page 55. If this language is not available on  
the disc, only an available language on the disc is played.  
When a disc supporting closed captioning is played, the  
subtitle and the closed caption may overlap each other on  
the television screen. In this case, turn off the subtitle  
feature.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Chapter 3: Using the DVD Player  
Changing the camera angle  
Important  
The information in this section only applies to DVD video  
discs with multiple camera angles recorded on them. To  
know if a different camera angle is available, turn on the  
Angle Mark feature. For more information, see “Setup  
menus and options” on page 55. Any time multiple camera  
angles are available, the angle symbol  
screen.  
appears on the  
To change the camera angle:  
While playing a DVD, press ANGLE on the remote control. Each time this  
button is pressed, the angle changes to the next angle available on the  
DVD.  
Zooming in on a scene  
Important  
The information in this section only applies to DVD video  
discs. Some discs will not allow the zoom feature to  
function.  
To play a scene close-up:  
1 While playing a DVD, press ZOOM on the remote control. The player zooms  
to the center of the screen. Each time this button is pressed, the zoom scale  
changes as follows: 1.5X, 2X, 3X, Zoom off.  
2 Use the remote control cursor buttons  
,
,
, and  
to move to a  
different part of the screen.  
To return to playing the video, press ZOOM repeatedly until zoom is  
cancelled.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Changing the video signal format  
Changing the video signal format  
Depending on the country you use this DVD player in, you may need to change  
the video signal format to match the television and DVD being played. In the  
United States and Canada, NTSC is the video signal format used. In Europe,  
Australia, and Asia, PAL is the video signal format used.  
Important  
The information in this section only applies to DVD video  
discs.  
If the video signal format is not set correctly, you may get  
a distorted picture on your television or no picture at all.  
To change the video signal format:  
With the disc stopped, press NTSC/PAL on the remote control. Each time  
this button is pressed, the video signal format changes as follows: MULTI,  
NTSC, and PAL.  
If you select MULTI, both NTSC and PAL encoded discs are played.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Chapter 3: Using the DVD Player  
Changing the component video  
output signal  
You can use either conventional interlaced video or progressive scan video  
when your DVD player is connected using component video out. Progressive  
scanned video reproduces high-density pictures with less flicker. Some  
televisions or projectors can handle only interlaced or progressive scanned  
video signals.  
Important  
The information in this section only applies to DVD video  
discs.  
If you select progressive scan, the S-Video and composite  
video out jacks on this player cannot output normal video  
signals. Your picture may break up and shake.  
If progressive video signals are input to a non-progressive  
component video in jacks on your television, the picture  
may not show normally. Therefore, if you do not use the  
progressive component video in jacks on your television,  
you should select interlace television.  
To change the component video output signal:  
With the disc stopped, press P.SCAN on the remote control. Each time this  
button is pressed, the component video output signal format changes as  
follows: Interlace TV and Progressive TV.  
Adjusting the display brightness  
To adjust the display brightness:  
Press DIMMER on the remote control. The first time the button is pressed,  
the display dims. The next time the button is pressed, the display turns  
off. In the Display Off mode, pressing any button will turn the display back  
on.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                     
Adjusting the  
DVD Player  
Settings 4  
Read this chapter to learn how to adjust your DVD player  
settings from the Setup menu.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 4: Adjusting the DVD Player Settings  
Using the Setup menu  
Your DVD player features a Setup menu that lets you adjust the player settings.  
To adjust settings from the Setup menu:  
1 With the disc stopped, press SETUP on the remote control. The Main Setup  
Menu opens.  
2 Use the remote control cursor buttons  
and  
to select the setup menu  
you want.  
3 Press ENTER on the remote control. The selected setup menu opens.  
4 Use the remote control cursor buttons  
and  
to select the setting you  
want to change.  
5 Use the remote control cursor buttons  
,
,
, and  
to highlight the  
new value.  
6 Press ENTER on the remote control. The value has been changed.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Using the Setup menu  
7 Press RETURN on the remote control to return to the Main Setup Menu.  
-OR-  
Press SETUP on the remote control. The Setup Menu closes.  
-OR-  
Use the remote control cursor buttons  
Setup Menu closes  
and  
to select EXIT SETUP. The  
Setup menus and options  
You can use these setup menus and options to adjust various setting for your  
DVD player.  
Menu  
Setting  
Description  
Language  
Setup  
Audio  
Select the audio language from those included on the  
instead. Options include:  
English - English is the audio language  
French - French is the audio language  
Spanish - Spanish is the audio language  
Others - Enter the four-digit language code from “DVD  
Language Code List” on page 59.  
Subtitle  
Select the subtitle language to be displayed from those  
included on the DVD. If the language you select is not  
be played instead. Options include:  
English - English is the subtitle language  
French - French is the subtitle language  
Spanish - Spanish is the subtitle language  
Others - Enter the four-digit language code from “DVD  
Language Code List” on page 59.  
Off - Turn the subtitle feature off  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Chapter 4: Adjusting the DVD Player Settings  
Menu  
Setting  
Description  
Disc Menu  
Select the disc menu language to be displayed from  
languages will be played instead. Options include:  
English - English is the disc menu language  
French - French is the disc menu language  
Spanish - Spanish is the disc menu language  
Others - Enter the four-digit language code from “DVD  
Language Code List” on page 59.  
Video Setup  
TV Aspect  
Select a picture size according to the aspect ratio of your  
television screen. Options include  
4:3 Letterbox - DVD videos recorded with the 16:9  
wide screen aspect ratio are reproduced in a letterbox  
screen which has black bands on the top and bottom.  
4:3 Pan-Scan - DVD videos recorded with the 16:9  
wide screen aspect ratio are reproduced in the  
pan-scan screen which automatically trims the left and  
right of the picture.  
16:9 Wide - DVD videos recorded with the 16:9 wide  
screen aspect ratio are reproduced by filling the  
television screen.  
Pic Mode  
Select the picture mode according to the type of content  
being played. Options include:  
Auto - The player automatically detects the source  
content (film or video) of the source and makes the  
necessary changes.  
Hi-Res - To improve the picture resolution for DVDs  
based on a video shot at 30 frames per second.  
N-Flicker - To reduce flicker in the picture for DVDs  
based on a film shot at 24 frames per second.  
TV Mode  
Select the type of video signal sent to your television.  
Options include:  
Interlace - Select this when connecting to a television  
without using the Component Video jacks.  
Progressive - Select this when connecting to a  
television when using the Component Video jacks.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Using the Setup menu  
Menu  
Setting  
Description  
Audio Setup  
Audio Out  
Select the type of audio signal you are using. Options  
include:  
Analog - Select this when outputting an analog audio  
signal using the Audio Out Left and Audio Out Right  
jacks.  
SPDIF/Stream - Select this when outputting the digital  
audio signal as it was recorded using the AC-3 Toslink  
jack.  
SPDIF/PCM - Select this when converting DTS or  
Dolby Digital bitstream to linear PCM (2 channel) of  
48 kHz/16 bit and outputting it.  
Downmix  
Select your preferred analog audio signal format.  
Options include:  
LT/RT - Select this when you have connected the  
player’s audio out jacks to an A/V amplifier or receiver  
with built-in multi-channel surround decoder.  
LO/RO - Select this when you have connected the  
player’s audio out jacks to a stereo amplifier, receiver,  
or television to hear two-channel stereo sound.  
Audio DRC  
Select whether to turn on or turn off dynamic range  
compression, which makes faint sound easier to hear at  
low volume levels. This function is only available while  
playing a disc recorded with Dolby Digital. Options  
include:  
On - Turn on dynamic range compression.  
Off - Turn off dynamic range compression.  
Ratings Setup  
Password  
Select to change the password for the parental lock. The  
player’s password was set to 3308 at the factory. After  
you select Change, you will be asked for the old  
password and a new password. Enter a four-digit  
sequence using the remote control. Options include:  
Change - Change the password  
Note: If you forget the password you set, use 3308.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                     
Chapter 4: Adjusting the DVD Player Settings  
Menu  
Setting  
Description  
Rating  
Select to restrict the types of DVD videos which can be  
played on the DVD player. For example, if a movie  
including violent scenes supports the parental lock  
feature, these scenes may be cut or replaced by other  
scenes. Options include:  
1 - Only play DVD videos made for children. Adult and  
general audience DVD videos cannot be played.  
2 - Play G rated DVD videos  
3 - Play G and PG rated DVD videos  
4 or 5 - Play G, PG, and PG-13 rated DVD videos  
6 - Play G, PG, PG-13, and R rated DVD videos  
7 - Play G, PG, PG-13, R, and NC-17 rated DVD videos  
8 - Play all discs.  
Others Setup  
Scr Saver  
Select to turn the screen saver on or off. Options include:  
On - Turn on the screen saver.  
Off - Turn off the screen saver.  
Angle Mark  
Select to turn the multiple angle notification on or off.  
Options include:  
On - Turn on the multiple angle notification feature.  
Off - Turn off the multiple angle notification feature.  
Default  
Select to reset all the settings except the rating level and  
the password to the default factory settings. Options  
include:  
Reset - Reset all settings to the default factory settings.  
Exit Setup  
Select to exit the setup menu and save your changes.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Using the Setup menu  
DVD Language Code List  
Code  
1027  
1028  
1032  
1044  
1045  
1051  
1052  
1053  
1057  
1059  
1060  
1061  
1066  
1067  
1070  
1079  
1093  
1097  
1103  
1105  
1109  
1130  
1142  
1144  
Language  
Afar  
Code  
1239  
1245  
1248  
1253  
1254  
1257  
1261  
1269  
1283  
1287  
1297  
1298  
Language  
Interlingue  
Inupiak  
Code  
1481  
1482  
1483  
1489  
1491  
1495  
1498  
1501  
1502  
1503  
1505  
1506  
1507  
1508  
1509  
1511  
1512  
1513  
1514  
1515  
1516  
1517  
Language  
Rhaeto-Romance  
Kirundi  
Abkhazian  
Afrikaans  
Arabic  
Indonesian  
Icelandic  
Italian  
Romanian  
Russian  
Kinyarwanda  
Sanskrit  
Sindhi  
Assamese  
Aymara  
Hebrew  
Azerbaijani  
Bashkir  
Japanese  
Yiddish  
Sangho  
Byelorussian  
Bulgarian  
Bihari  
Javanese  
Georgian  
Kazakh  
Serbo-Croatian  
Singhalese  
Slovak  
Bislama  
Greenlandic  
Cambodian  
Kannada  
Korean  
Slovenian  
Samoan  
Shona  
Bengali; Bangla 1299  
Tibetan  
Breton  
Catalan  
Corsican  
Czech  
1300  
1301  
1305  
1307  
1311  
1313  
1326  
1327  
1332  
1334  
1345  
Somali  
Kashmiri  
Kurdish  
Albanian  
Serbian  
Kirghiz  
Siswati  
Welsh  
Latin  
Sesotho  
Sundanese  
Swedish  
Swahili  
Danish  
German  
Bhutani  
Greek  
Langala  
Laothian  
Lithuanian  
Latvian; Lettish 1521  
Tamil  
English  
Malagasy  
1525  
Tegulu  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 4: Adjusting the DVD Player Settings  
Code  
1145  
1149  
1150  
1151  
1157  
1165  
1166  
1171  
1174  
1181  
1183  
1186  
1194  
1196  
1203  
1209  
1217  
1226  
1229  
1233  
1235  
Language  
Esperanto  
Spanish  
Estonian  
Basque  
Persian  
Finnish  
Code  
1347  
1349  
1350  
1352  
1353  
1356  
1357  
1358  
1363  
1365  
1369  
1376  
1379  
1393  
1403  
1408  
1417  
1428  
1435  
1436  
1463  
Language  
Maori  
Code  
1527  
1528  
1529  
1531  
1532  
1534  
1535  
1538  
1539  
1540  
1543  
1557  
1564  
1572  
1581  
1587  
1613  
1632  
Language  
Tajik  
Macedonian  
Malayalam  
Mongolian  
Moldavian  
Marathi  
Thai  
Tigrinya  
Turkmen  
Tagalog  
Setswana  
Tonga  
Fiji  
Malayalam  
Maltese  
Burmese  
Nauru  
Faroese  
French  
Turkish  
Tsonga  
Tatar  
Frisian  
Irish  
Napali  
Twi  
Scots Gaelic  
Galician  
Guarani  
Gujarati  
Hausa  
Dutch  
Ukranian  
Urdu  
Norwegian  
Occitan  
Uzbek  
(Afan) Oromo  
Oriya  
Vietnamese  
Volapuk  
Wolof  
Hindi  
Punjabi  
Croatian  
Hungarian  
Armenian  
Interlingua  
Polish  
Xhosa  
Pashto; Pushto 1665  
Yoruba  
Chinese  
Zulu  
Portuguese  
Quechua  
1684  
1697  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintaining and  
Troubleshooting  
Your DVD Player 5  
Read this chapter to learn how to maintain and  
troubleshoot your DVD player.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Chapter 5: Maintaining and Troubleshooting Your DVD Player  
Cleaning and maintenance  
Your DVD player is cooled by air circulated through the vents on the  
bottom of the case. Keep these vents free of dust. With the DVD player  
turned off and unplugged, brush the dust away from the vents with a damp  
cloth. Be careful not to drip any water into the vents. Do not attempt to  
clean dust from the inside of your DVD player.  
Do not use abrasive or solvent cleaners because they can damage the finish.  
Do not allow any excessive water or moisture to come into contact with  
the surface of the DVD player. If water or moisture gets inside your player,  
operating problems and electrical and shock hazards may result.  
Do not scratch or hit the case with your fingers or any hard objects.  
Care and handling of discs  
When handling a disc, do not touch the sides.  
Do not stick paper to or write anything on the printed surface.  
Fingermarks and dust on the recorded surface should be carefully wiped  
off with a soft cloth. For more information, see “To clean CDs or DVDs:”  
on page 63.  
Always keep the discs in their cases after use to protect them from dust  
and scratches.  
Do not use a cracked, deformed, or repaired disc. These discs are easily  
broken and may cause serious personal injury and player malfunction.  
Do not expose discs to direct sunlight, high humidity, or high temperature  
for an extended period of time.  
When loading or unloading a disc in the disc tray, always place it with  
the printed side up.  
Important  
The temperature inside this DVD player can be very high.  
When you finish playing the disc, remove it from the player  
to prevent the high temperature from deforming the disc.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Troubleshooting  
Troubleshooting  
Use the following information to solve common problems.  
The player does not turn on  
Make sure that the power cord is plugged into a powered electrical outlet.  
To test the outlet, plug a working device, such as a lamp, into the outlet  
and turn it on.  
If your player is plugged into a surge protector, make sure that the surge  
protector is connected securely to an electrical outlet, turned on, and  
working correctly.  
The player will not play a disc  
Make sure that the disc label is facing up, then try again.  
Clean the disc.  
To clean CDs or DVDs:  
Wipe from the center to the edge, not around in a circle, using a  
product made especially for the purpose.  
The disc is scratched and cannot be played.  
The parental control is set to prevent playing a DVD with this rating.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Chapter 5: Maintaining and Troubleshooting Your DVD Player  
DVD discs and players contain regional codes that help control DVD title  
exports and help reduce illegal disc distribution. To be able to play a DVD,  
the disc’s regional code and your DVD player’s regional code must match.  
The regional code on your DVD player is set when it is manufactured. The  
regional code for the United States and Canada is 1. The regional code for  
Mexico is 4.  
Make sure the invalid operation symbol is not shown on the display. For  
more information, see “Invalid operation symbol” on page 30.  
The player malfunctions  
Clean the disc.  
The disc is scratched and cannot be played.  
Important  
If you cannot eject the disc, turn off the DVD player, then  
turn it on again and press the eject button.  
You cannot see a picture  
Make sure that the video cable(s) are connected.  
Make sure that the television has been set for the correct input source.  
Make sure that the DVD is not dirty or scratched.  
If you are using component video output, make sure that the correct  
component video output type has been selected for your television. For  
more information, see “Changing the video signal format” on page 51.  
Make sure the correct video format has been selected for your television  
and DVD disc. For more information, see “Changing the component video  
output signal” on page 52.  
The picture is noisy or distorted  
You are using the rapid advance or reverse playback feature or the frame  
advance or reverse playback feature.  
Make sure that you have not connected a VCR between the television and  
the DVD player. Due to the Macrovision copy protection feature, you  
cannot connect a VCR to your DVD player.  
Make sure that the DVD is not dirty or scratched.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Troubleshooting  
If you are using component video output, make sure that the correct  
component video output type has been selected for your television. For  
more information, see “Changing the video signal format” on page 51.  
Make sure the correct video format has been selected for your television  
and DVD disc. For more information, see “Changing the component video  
output signal” on page 52.  
The picture looks abnormal or there is no picture  
If you are using component video output, make sure that it is selected  
correctly. For more information, see “TV Mode” on page 56.  
There is a slight pause in the playback  
There is a slight pause that may occur during layer transition when playing  
a DVD video recorded in dual-layer format. This is not a malfunction.  
There is no sound  
Make sure that the audio cable(s) are connected.  
If you are using external speakers, make sure they are connected correctly  
to your receiver or amplifier.  
If you are using external speakers, make sure the receiver or amplifier is  
set to receive audio from the DVD player.  
If you are using Digital Out, make sure that it is set correctly. For more  
information, see “Audio Out” on page 57.  
The sound is noisy or distorted  
Make sure that the disc is not dirty or scratched.  
Make sure all cables are connected securely.  
The remote control does not operate  
Replace the batteries. For more information, see “Inserting batteries” on  
page 15.  
Make sure that you are less than 23 feet (7 meters) from the infrared remote  
sensor on the DVD player.  
Make sure that nothing is blocking the infrared remote sensors on the  
remote control or the DVD player.  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5: Maintaining and Troubleshooting Your DVD Player  
Technical support  
Telephone support  
For customer service and support, call 1-800-846-2301 between 7 am and 10 pm  
Central Time Monday through Friday.  
Internet  
For technical support, go to the Gateway Support Web site at  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
A
Using Discs  
Read this chapter to learn about:  
Using DVD video discs  
Using MP3 discs  
Copying discs  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Using Discs  
Using DVD video discs  
Region code  
DVD players and DVD videos have their own region code numbers which are  
assigned to each country or area as shown below. Your DVD player was set to  
your region code number before it left the factory. If the region code number  
of this DVD player is different from that of the DVD video, your DVD player  
will not play it.  
Major  
countries  
or area  
All  
regions  
North  
America  
Europe,  
Japan,  
Middle  
East  
Southeast Oceania, Russia  
China  
Asia  
South  
America  
Playable  
region  
code  
To play a DVD on this player, it must be marked with  
or  
.
Markings on DVD video packaging  
Mark  
Description  
Indicates the region code where the disc can be played.  
Number of audio languages recorded with multiple audio languages. The number  
in the mark indicates the number of audio languages. (Up to 8 languages)  
Number of subtitle languages recorded with the multiple subtitle languages. The  
number in the mark indicates the number of subtitle languages. (Up to 32  
languages)  
Number of angles recorded from the multiple camera angles. The number in the  
mark indicates the number of angles. (Up to 9 angles)  
Aspect ratio and television screen type.  
16:9 and 4:3 indicate the aspect ratio  
LB indicates letter box, PS indicates pan-scan, and WIDE indicates wide screen.  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
Using MP3 discs  
This DVD player can play back MP3 files on a CD-R disc, CD-RW disc, or a  
commercial CD.  
Some discs may not play in this player because of the disc characteristics  
or recording condition.  
Only the first eleven characters of folder and file names are displayed.  
Only the characters A-Z, 0-9, and - are displayed.  
The order shown in the menu may not be the same as the order shown  
on a PC.  
Recording an MP3 disc using a CD-R/CD-RW  
disc  
We recommend you record MP3 files in 44.1 kHz sampling frequency/128 kbps  
bit rate.  
Copying discs  
Check the copyright laws in your country regarding recording from  
DVD video, CD, and MP3 discs. Recording of copyrighted material may  
infringe copyright laws.  
DVD video is protected by the copyguard system.  
When you connect the DVD player to your VCR directly, the copyguard  
system activates and the picture may not be played back correctly.  
For more information, see “Macrovision statement” on page 76.  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Using Discs  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety,  
Regulatory, and  
Legal Information B  
Important safety  
information  
1 Read Instructions - All the safety and operating instructions should be  
read before the product is operated.  
2 Retain instructions - The safety and operating instructions should be  
retained for future reference.  
3 Heed Warnings - All warnings on the product and in the operating  
instructions should be adhered to.  
4 Follow Instructions - All operating and use instructions should be  
followed.  
5 Cleaning - Unplug this product from the wall outlet before cleaning.  
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for  
cleaning.  
6 Attachments - Do not use attachments not recommended by the  
product manufacturer as they may cause hazards.  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Safety, Regulatory, and Legal Information  
7 Water and Moisture - Do not use this product near water - for example, near a bath tub, wash  
bowl, kitchen sink, or laundry tub; in a wet basement, or near a swimming pool; and the like.  
8 Accessories - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The  
product may fall, causing serious injury to a child or adult, and serious damage to the product.  
Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold  
with the product. Any mounting of the product should follow the manufacturer’s instructions,  
and should use a mounting accessory recommended by the manufacturer.  
9 A product and cart combination should be moved with care. Quick stops, excessive force, and  
uneven surfaces may cause the product and cart combination to overturn.  
10 Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable  
operation of the product and to protect it from overheating, and these openings must not be  
blocked or covered. The openings should never be blocked by placing the product on a bed,  
sofa, rug, or other similar surface. This product should not be placed in a built-in installation  
such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s  
instructions have been adhered to.  
11 Power Sources - This product should be operated only from the type of power source indicated  
on the marking label. If you are not sure of the type of power supply to your home, consult  
your product dealer or local power company. For products intended to operate from battery  
power, or other sources, refer to the operating instructions.  
12 Grounding or Polarization - This product may be equipped with a polarized alternating-current  
line plug (a plug having one blade wider than the other). This plug will fit into the power outlet  
only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet,  
try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your  
obsolete outlet. Do not defeat the safety purpose of the polarized plug.  
Alternate Warnings - This product is equipped with a three-wire grounding-type plug, a plug  
having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. this  
is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to  
replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.  
13 Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be  
walked on or pinched by items placed upon or against them, paying particular attention to  
cords at plugs, convenience receptacles, and the point where they exit from the product.  
14 Outdoor Antenna Grounding - If an outside antenna or cable system is connected to the  
product, be sure the antenna or cable system is grounded so as to provide some protection  
against voltage surges and built-up static charges. Article 810 of the National Electrical Code,  
ANSI/NFPA 70, provides information with regard to proper grounding of the mast and  
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of  
grounding conductors, location of antenna-discharge unit, connection to grounding electrodes,  
and requirements for the grounding electrode. See Figure 1.  
15 Lightning - For added protection for this product during a lightning storm, or when it is left  
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect  
the antenna or cable system. This will prevent damage to the product due to lightning and  
power-line surges.  
16 Power Lines - An outside antenna system should not be located in the vicinity of overhead  
power lines or other electric light or power circuits, or where it can fall into such power lines  
or circuits. When installing an outside antenna system, extreme care should be taken to keep  
from touching such power lines or circuits as contact with them might be fatal.  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important safety information  
17 Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles  
as this can result in a risk of fire or electric shock.  
18 Object and Liquid Entry - Never push objects of any kind into this product through openings  
as they may touch dangerous voltage points or short-out parts that could result in a fire or  
electric shock. Never spill liquid of any kind on the product.  
19 Servicing - Do not attempt to service this product yourself as opening or removing covers may  
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service  
personnel.  
20 Damage Requiring Service - Unplug this product form the wall outlet and refer servicing to  
qualified service personnel under the following conditions:  
When the power-supply cord or plug is damaged,  
If liquid has been spilled, or objects have fallen into the product,  
If the product has been exposed to rain or water,  
If the product does not operate normally by following the operating instructions. Adjust  
only those controls that are covered by the operating instructions as an improper  
adjustment of other controls may result in damage and will often require extensive work by  
a qualified technician to restore the product to its normal operation.  
If the product has been dropped or damaged in any way, and  
When the product exhibits a distinct change in performance - this indicates a need for  
service.  
21 Replacement Parts - When replacement parts are required, be sure the service technician has  
used replacement parts specified by the manufacturer or have the same characteristics as the  
original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.  
22 Safety Check - Upon completion of any service or repairs to this product, ask the service  
technician to perform safety checks to determine that the product is in proper operating  
condition.  
23 Wall or Ceiling Mounting - The product should be mounted to a wall or ceiling only as  
recommended by the manufacturer.  
24 Heat - The product should be situated away from heat sources such as radiators, heat registers,  
stoves, or other products (including amplifiers) that produce heat.  
Notes:  
1 Item 12 is not required except for grounded or polarized product.  
2 Item 14 and 16 are not required except for units provided with antenna terminals.  
3 Item 14 complies with UL in U.S.A.  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety, Regulatory, and Legal Information  
Regulatory compliance statements  
United States of America  
Federal Communications Commission (FCC)  
Unintentional emitter per FCC Part 15  
This device has been tested and found to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation.  
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful interference to radio or television  
reception. However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause interference to radio and television reception, which can  
be determined by turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
Reorient or relocate the receiving antenna  
Increase the separation between the equipment and receiver  
Connect the equipment to an outlet on a different circuit from that to which the receiver is  
connected  
Consult the dealer or an experienced radio/TV technician for help.  
This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the  
following two conditions: (1) this device may not cause harmful interference, and (2) this device  
must accept any interference received, including interference that may cause undesired operation.  
Caution  
Changes or modifications not expressly approved by  
Gateway could void the FCC compliance and negate your  
authority to operate the product.  
Canada  
Industry Canada (IC)  
Unintentional emitter per ICES-003  
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital  
apparatus as set out in the radio interference regulations of Industry Canada.  
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites  
applicables aux appareils numériques de Classe B prescrites dans le règlement sur le brouillage  
radioélectrique édicté par Industrie Canada.  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Regulatory compliance statements  
Laser safety statement  
All Gateway systems equipped with CD and DVD drives comply with the appropriate safety  
standards, including IEC 825. The laser devices in these components are classified as “Class 1 Laser  
Products” under a US Department of Health and Human Services (DHHS) Radiation Performance  
Standard. Should the unit ever need servicing, contact an authorized service location.  
Warning  
Use of controls or adjustments or performance of  
procedures other than those specified in this manual may  
result in hazardous radiation exposure. To prevent  
exposure to laser beams, do not try to open the enclosure  
of a CD or DVD drive.  
California Proposition 65 Warning  
Warning  
This product contains chemicals, including lead, known to  
the State of California to cause cancer and/or birth defects  
or reproductive harm.  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Safety, Regulatory, and Legal Information  
Notices  
Copyright © 2003 Gateway, Inc.  
All Rights Reserved  
14303 Gateway Place  
Poway, CA 92064 USA  
All Rights Reserved  
This publication is protected by copyright and all rights are reserved. No part of it may be reproduced or  
transmitted by any means or in any form, without prior consent in writing from Gateway.  
The information in this manual has been carefully checked and is believed to be accurate. However, changes are  
made periodically. These changes are incorporated in newer publication editions. Gateway may improve and/or  
change products described in this publication at any time. Due to continuing system improvements, Gateway is  
not responsible for inaccurate information which may appear in this manual. For the latest product updates,  
consult the Gateway Web site at www.gateway.com. In no event will Gateway be liable for direct, indirect,  
special, exemplary, incidental, or consequential damages resulting from any defect or omission in this manual,  
even if advised of the possibility of such damages.  
In the interest of continued product development, Gateway reserves the right to make improvements in this  
manual and the products it describes at any time, without notices or obligation.  
Trademark Acknowledgments  
1-800-GATEWAY, ActiveCPR, ALR, AnyKey, black-and-white spot design, CrystalScan, Destination, DestiVu,  
EZ Pad, EZ Point, Field Mouse, Gateway 2000, Gateway Country, gateway.net, Gateway stylized logo, Perfect  
Scholar, Solo, TelePath, Vivitron, stylized “G” design, and “You’ve got a friend in the business” slogan are  
registered trademarks and black-and-white spotted box logo, GATEWAY, Gateway Astro, Gateway@Work,  
Gateway Connected touch pad, Gateway Connected music player, Gateway Cyber:)Ware, Gateway  
Education:)Ware, Gateway Flex Case, Gateway Gaming:)Ware, Gateway GoBack, Gateway Gold, Gateway  
Learning:)Ware, Gateway Magazine, Gateway Micro Server, Gateway Money:)Ware, Gateway Music:)Ware,  
Gateway Networking Solutions, Gateway Online Network (O.N.) solution, Gateway Photo:)Ware, Gateway  
Professional PCs, Gateway Profile, Gateway Solo, green stylized GATEWAY, green stylized Gateway logo,  
Gateway Teacher:)Ware, Gateway Video:)Ware, HelpSpot, InforManager, Just click it!, Learn@Gateway, Kids  
BackPack, SERVE-TO-ORDER, Server Watchdog, the Spotted G Gateway Logo and the Spotted G Logo,  
SpotShop, Spotshop.com, and Your:)Ware are trademarks of Gateway, Inc. Intel, Intel Inside logo, and Pentium  
are registered trademarks and MMX is a trademark of Intel Corporation. Microsoft, MS, MS-DOS, and Windows  
are trademarks or registered trademarks of Microsoft Corporation. All other product names mentioned herein are  
used for identification purposes only, and may be the trademarks or registered trademarks of their respective  
companies.  
Macrovision statement  
This product incorporates copyright protection technology that is protected by method claims of certain U.S.  
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of  
this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home  
and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse  
engineering or disassembly is prohibited.  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Index  
A
A TO B CANCELLED  
display message 43  
A TO B SET A  
display message 42  
A TO B SET B  
display message 43  
A< >B button  
remote control 12  
using 42  
back panel connections 10  
inserting 15  
installing 15  
Book Mark button  
remote control 12  
using 47, 48  
bookmarks  
setting 47  
starting play 48  
using 47  
AC-3 (Toslink) cable 5  
accessing  
DVD menu 41  
MP3 menu 33  
adjusting  
adjusting display 52  
buttons  
display brightness 52  
analog stereo audio out  
setting 57  
Angle button  
remote control 12  
using 50  
+10 13  
A< >B 12, 42  
Angle 12, 50  
Audio 13, 48  
Book Mark 12, 47, 48  
Clear 12, 46  
angle mark 58  
aspect ratio  
Dimmer 12, 52  
Display 12, 37, 39  
eject 64  
Menu 13, 41  
Multiplex 13  
P.Scan 13, 52  
PBC 13  
play 8, 12  
power 6, 11  
Random 12, 44  
remote control 11  
Repeat 12, 42, 43  
Return 13  
recorded on DVD 68  
Audio button  
remote control 13  
using 48  
audio DRC 57  
audio language  
changing 48  
recorded on DVD 68  
setting 55  
audio out  
connection 10  
setup 57  
signal format 57  
audio signal  
setting 57  
search ahead 7, 14  
search back 7, 14  
Setup 13, 54  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
skip ahead 8, 14  
skip back 7, 14  
step/pause 8, 14  
stop 8, 12  
audio CD 63  
CD 63  
DVD 63  
DVD player 62  
Subtitle 13, 49  
Title 13, 40  
remote control 12  
using 46  
Zoom 13, 50  
closed caption 49  
coaxial audio  
C
camera angle  
changing 50  
recorded on DVD 68  
cable 5  
CD  
connection 10  
cleaning 63  
indicator 9  
code number  
region 30  
playing tracks in random order 44  
repeating section 42  
types of discs played 2  
component video 18  
cable 5  
connection 10  
using 20, 24  
CD-R/W  
types of discs played 2  
changing 51  
angle mark setting 58  
composite video 18  
cable 4  
audio language 48, 55  
audio signal format 57  
audio signal type 57  
camera angle 50  
component video output signal 52  
Dolby Digital dynamic range  
compression 57  
connection 10  
using 23, 26  
connecting  
to receiver 20  
to television 24  
connections  
audio out 10  
DVD menu language 56  
DVD ratings 58  
back panel 10  
coaxial audio 10  
component video 10  
composite video 10  
optical audio out 10  
S-Video out 10  
controls  
parental lock 58  
password 57  
picture mode 56  
screen saver setting 58  
subtitle language 55  
television aspect 56  
television mode 56  
video signal format 51  
front panel 6, 7  
remote control 11  
D
chapter  
repeating 42  
skipping 35  
cleaning  
default password 57  
default settings 58  
Dimmer button  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
remote control 12  
using 52  
troubleshooting player 61  
turning off player 31  
turning on player 31  
types of discs played 2  
using menu 32  
disc  
copying 69  
pausing play 34  
playing 31, 32, 33  
repeating 42  
stopping 34  
tray 6  
DVD+R/RW  
DVD-R/RW  
types of discs played 2  
dynamic range compression 57  
using 67  
disc menu language  
setting 56  
display  
eject button 64  
brightness 52  
indicators 8  
locating 6  
multi-information 9  
on-screen 37  
Display button  
remote control 12  
using 37, 39  
repeating 43  
skipping 35  
repeating 43  
frame advance  
using 35  
display messages  
A TO B CANCELLED 43  
A TO B SET A 42  
A TO B SET B 43  
Repeat 42  
front panel controls 6, 7  
GoTo mode 47, 48  
Repeat Off 42  
R-STOP 34  
STOP 34  
display off mode 52  
Dolby Digital audio 57  
downmix audio out 57  
DVD  
Hi-Res picture mode 56  
accessing menu 41  
accessing title menu 40  
cleaning 63  
indicators  
CD 9  
display 8  
DVD video 9  
MP3 9  
play status 8  
play/pause 8  
program 8  
progressive 8  
random play 9  
indicator 9  
language code list 59  
maintaining player 61  
markings on package 68  
region code 68  
repeating section 42  
title menu 40  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
repeat 9  
standby 6  
display off 52  
insert  
batteries 15  
install  
GoTo 47, 48  
Mark 47, 48  
pause 34  
batteries 15  
picture 56  
interlace television  
using 52, 56  
playback 44  
program 45  
invalid operation symbol 30  
repeat 42, 43  
standby 31  
J
JPEG  
Still Picture 34  
television 56  
Title/chapter search 39  
Title/time search 39  
types of discs played 2  
K
Kodak® Photo CD  
types of discs played 2  
disc menu 33  
indicator 9  
playing files in random order 44  
recording 69  
types of discs played 2  
using 69  
L
language  
audio 48  
subtitle 49  
language setup 55  
languages  
remote control 13  
DVD code list 59  
laser safety statement 75  
letterbox format 56  
LO/RO  
analog audio signal format 57  
LT/RT  
N-Flicker picture mode 56  
NTSC 51  
NTSC/PAL button  
remote control 12  
using 51  
analog audio signal format 57  
number button pad  
remote control 13  
M
Macrovision 64, 76  
maintaining  
DVD player 61  
Mark mode 47, 48  
menu  
on-screen display  
using 37  
open disc tray button  
DVD player 7  
DVD 32  
MP3 disc 33  
Menu button  
remote control 13  
using 41  
remote control 12  
optical out connection 10  
80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD player 6, 31  
P
remote control 11, 31  
P.Mode button  
program  
remote control 12  
mode 45  
using 45, 46  
P.Scan button  
remote control 13  
using 52  
package contents 4  
PAL 51  
pan-scan format 56  
parental controls 63  
ratings 30, 58  
using 58  
program indicator 8  
progressive scan  
indicator 8  
using 52, 56  
using 44  
random play indicator 9  
rating level  
parental controls 30, 58  
setup 57  
RCA audio cable  
identifying 4  
RCA component video cable  
identifying 5  
password 57  
pause  
indicator 8  
mode 34  
playback 34  
pause button  
DVD player 8  
remote control 14  
PBC button  
remote control 13  
picture mode  
Hi-Res 56  
RCA composite video cable  
identifying 4  
connecting to 20  
remote control  
buttons 11  
N-Flicker 56  
play  
indicator 8  
status indicator 8  
identifying 4  
play button  
remote LED 11  
DVD player 8  
remote control 12  
playback  
Repeat  
display message 42  
mode 44  
repeating 42  
indicators 9  
mode 42, 43  
Repeat button  
remote control 12  
using 42, 43  
slowing down 36  
speeding up 36  
playing  
CD tracks in random order 44  
disc 31, 32, 33  
MP3 files in random order 44  
tracks in a specific order 45  
power button  
Repeat Off  
display message 42  
repeating  
CD section 42  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD section 42  
file 43  
SPDIF/Stream audio out 57  
speeding up playback 36  
folder 43  
playback 42  
Return button  
remote control 13  
R-STOP  
display message 34  
indicator 6  
mode 31  
step/pause button  
DVD player 8  
remote control 14  
Still Picture mode 34  
DVD player 8  
remote control 12  
S
safeguards 3, 71  
safety 3, 71  
screen saver 58  
search ahead button  
DVD player 7  
remote control 14  
search back button  
DVD player 7  
remote control 14  
setting  
disc 34  
remote control 13  
using 49  
audio language 55  
audio signal 57  
audio signal type 57  
disc menu language 56  
language 55  
subtitle language  
changing 49  
setting language 55  
picture mode 56  
subtitle language 55  
video 56  
types of discs played 2  
S-Video 18  
cable 5  
Setup button  
connection 10  
using 21, 25  
remote control 13  
using 54  
Setup menu 54  
skip ahead button  
DVD player 8  
remote control 14  
skip back button  
DVD player 7  
remote control 14  
skipping  
invalid operation 30  
technical support 66  
television  
aspect 56  
connecting to 24  
mode 56  
chapter 35  
screen type recorded on DVD 68  
title  
file 35  
track 35  
DVD menu 40  
82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
repeating 42  
Title button  
remote control 13  
using 40  
Title/chapter search mode 39  
Title/time search mode 39  
Toslink cable 5  
tracks  
clearing programmed 46  
repeating 42  
skipping 35  
troubleshooting  
cleaning CD 63  
cleaning DVD 63  
DVD player 61  
turning off  
DVD player 31  
turning on  
DVD player 31  
V
VCD  
types of discs played 2  
video out connection 10  
video setup 56  
video signal format 51  
W
wide screen format 56  
Z
Zoom button  
remote control 13  
using 50  
zooming in 50  
83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
84  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAN AD-520 DVD PLYR GDE R0 11/03  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Electro Voice Microphone N D308 User Manual
Excalibur electronic Games 404 User Manual
Extron electronic Switch VTT001 User Manual
Festool Drill TDK 12 User Manual
Fisher Price Motorized Toy Car 74020 User Manual
FujiFilm Camera Lens 3228 User Manual
Fujitsu Security Camera RX600 S4 User Manual
Furuno Stepper Machine LS 6000 User Manual
Generac Portable Generator 1019 3 User Manual
Gianni Industries Door L NH500 User Manual