Garmin GPS Receiver 190 01183 03 0B User Manual

®
Rino 650  
owner’s manual  
August 2011  
190-01183-03_0B  
Printed in Taiwan  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Navigating a Saved Trackꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ12  
Table of Contents  
Navigation �����������������������������13  
Navigating to a Destinationꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ13  
Mapꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ14  
Compass ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ14  
Navigating to a Contactꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ16  
Geocaches ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ16  
Routesꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ17  
Using Sight ‘N Goꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ18  
Starting Navigation to a Man  
Getting Started������������������������1  
Keysꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ1  
Manual Conventionsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ2  
Battery Informationꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ2  
Acquiring Satellite Signalsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ3  
Registering Your Deviceꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ4  
Turning On the Backlightꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ4  
Locking the Screenꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ4  
Overboard Location ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ18  
Radio����������������������������������������5  
Radio Channelsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ5  
Muting the Radio ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ6  
Radio Settingsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ6  
About Contactsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ7  
Notesꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ7  
About Peer-to-Peer Positioningꢀꢀꢀꢀ8  
Radio Page Status Indicatorsꢀꢀꢀꢀꢀꢀꢀ9  
Customizing Your Device ����19  
Customizing the Data Fieldsꢀꢀꢀꢀꢀꢀꢀꢀ19  
Customizing the Home Screenꢀꢀꢀꢀ19  
Creating a Custom Profile ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ19  
Customizing Specific Pagesꢀꢀꢀꢀꢀꢀꢀ20  
System Settingsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ21  
Display Settingsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ22  
Setting the Device Tonesꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ22  
Map Settingsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ22  
Tracks Settingsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ23  
Changing the Units of Measureꢀꢀ24  
Waypoints and Tracks����������10  
Waypointsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ10  
About Sharing Dataꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ11  
Tracksꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ11  
Rino 650 Owner’s Manual  
i
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Time Settingsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ24 Caring for the Deviceꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ35  
Position Format Settings ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ24 Data Managementꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ36  
Heading Settingsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ25  
Altimeter Settings ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ25  
Appendix �������������������������������39  
Additional Mapsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ39  
Geocache Settingsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ26  
Optional Accessoriesꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ39  
Routing Settingsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ27  
Data Field Optionsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ40  
Marine Map Settingsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ28  
Troubleshootingꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ45  
Fitnessꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ29  
Index�������������������������������������47  
Resetting Dataꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ29  
Tools ��������������������������������������30  
Trip Computerꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ30  
Elevation Plotꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ30  
Viewing the Calendar and  
Almanacs ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ30  
Calculating the Size of an Area ꢀꢀꢀ31  
Setting an Alarmꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ31  
Opening the Stopwatchꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ31  
Device Information��������������32  
Updating the Softwareꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ32  
Viewing Device Informationꢀꢀꢀꢀꢀꢀꢀꢀ32  
Specifications ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ32  
About the Batteriesꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ33  
ii  
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Keys  
Getting Started  
WARNING  
See the Important Safety and Product  
Information guide in the product  
box for product warnings and other  
important information.  
When using your device the first time,  
you should complete the following  
tasks to set up the device and get to  
know the basic features.  
1. Install the batteries (page 2).  
2. Register the device (page 4).  
3. Acquire satellites (page 3).  
4. Set up the radio (page 6).  
5. Mark a waypoint (page 10).  
6. Record a track (page 12).  
Key Description  
Select to send out a call toneꢀ  
If enabled (page 8), the call  
key sends your position when  
releasedꢀ  
7. Navigate to a destination (page 13).  
8. Calibrate the compass (page 14).  
Rino 650 Owner’s Manual  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Getting Started  
The device operates on the included  
lithium-ion battery pack or an optional  
Alkaline battery pack, which uses four  
AA batteries (page 34).  
Hold to turn on or off the deviceꢀ  
Select to adjust backlight,  
volume, squelch level, and to  
lock or unlock the screenꢀ  
Hold to talkꢀ PTT stands for  
push-to-talkꢀ  
For tips on maximizing battery life and  
other battery information, see page 33.  
Manual Conventions  
All the pages are found on the home  
Installing the Lithium-ion  
Battery  
1. Locate the battery pack  
that  
screen. Use or  
the pages.  
to scroll through  
came in the product box.  
The small arrows (>) used in the text  
indicate that you should select a series  
of items in order, for example, “Select  
Delete > Yes.”  
Battery Information  
WARNING  
This product contains a lithium-ion  
battery. To prevent personal injury or  
device damage, store the device out of  
direct sunlight.  
2. Align the metal contacts on the  
battery pack with the metal contacts  
on the back of the device.  
2
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Getting Started  
3. Gently press the battery pack into  
place.  
4. Turn the D-ring clockwise.  
Charging the Lithium-ion  
Battery  
Before you use the device the first  
time, charge the battery. Charging a  
fully depleted battery takes 6 hours.  
The device will not charge when  
outside the temperature range from 0°C  
to 45°C (from 32°F to 113°F).  
4. Charge the device completely.  
A fully charged battery can run for  
up to 14 hours before it must be  
recharged.  
1. Plug the AC charger into a standard  
wall outlet.  
Acquiring Satellite  
Signals  
2. Lift weather cap.  
It may take 30 to 60 seconds to acquire  
signals.  
3. Plug the small end of the AC  
charger into the two-pin connector  
.  
1. Go outdoors to an open area.  
2. Turn on the device.  
3. Wait while the device searches for  
satellites.  
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
     
Getting Started  
A question mark flashes while the  
device determines your location.  
Adjusting the Backlight  
Brightness  
The backlight levels vary for the  
different power sources. For example,  
the highest backlight setting while  
running on AA batteries is lower  
than the highest while running on the  
lithium-ion battery. This is to extend  
the AA battery life.  
The GPS bars indicate satellite  
strength. When the bars are green, the  
device has acquired satellite signals.  
Registering Your Device  
Keep the original sales receipt, or a  
photocopy, in a safe place.  
1. While the device is on, select  
.
2. Use + and - to adjust the brightness  
level.  
Turning On the Backlight  
The backlight will turn off after a  
period of inactivity. To change the  
backlight timeout, see page 22.  
Locking the Screen  
Note: This action does not lock the  
keys.  
Select  
.
1. Select  
.
Touch the screen.  
2. Select Lock Screen.  
Alerts and messages also activate the  
backlight.  
4
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Radio  
station.  
Radio  
Choosing a Channel  
1. Select Radio > Channel.  
The radio page provides interface for  
UHF CBRS-Australia/ UHF PRS New  
Zealand radio operations.  
2. Use + or - to select a channel.  
Scanning Channels  
You can scan the channels for voice  
activity.  
Radio Channels  
Channel  
Frequency  
9–30, 39, 40,  
49–60, 64–70,  
79, 80  
UHF CBRS/PRS  
channelsꢀ  
Select Radio > Scan.  
Setting Up a Scan List  
1R–8R (31–38)  
41R–48R (71–78) channels  
Repeater  
You can pick which channels and codes  
to scan. Selecting specific channels and  
codes reduces the scan time and helps  
prevent missing a transmission.  
Note: Channels 5 and 35 are reserved  
as emergency channels. Channels 22  
and 23 are reserved for data only, and  
voice transmissions are not allowed.  
Channels 61, 62, and 63 are reserved  
for future allocation and should not be  
used. Communication with another CB  
station is not authorized on channels  
1–8, 31–38, 41–48, and 71–78 within  
operational range of a CB repeater  
1. Select Radio >  
Scanlist.  
> Setup  
2. Select a channel to add.  
3. Select  
.
Monitoring for Activity  
You can monitor a single channel for  
any activity, including static and weak  
Rino 650 Owner’s Manual  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Radio  
voice signals. This is helpful if a signal  
is going out of range.  
Squelch tone Mode:  
CtCSS—Continuous Tone  
Controlled Squelch System  
allows you to ignore unwanted  
calls from persons using the  
same channel.  
Select Radio > Monitor.  
Muting the Radio  
1. Select  
.
DCS—Digital-Coded Squelch  
allows you to ignore unwanted  
calls from persons using the  
same channel.  
2. Select Volume.  
Radio Settings  
Select Radio >  
> Setup Radio.  
Repeater Channel—Enables the  
CBRS/PRS repeater channels.  
Send Location—enables you to  
send your current location after  
each transmission (page 8).  
Headset type—allows you to  
select the type of headset you are  
using. To purchase accessories, go  
to http://buy.garmin.com or contact  
your Garmin dealer.  
Allow Polling—enables polling.  
Polling allows another Rino user to  
get your location by sending a poll  
request.  
Vox LevelVoice operated  
transmission controls the sensitivity  
level of any Vox accessory.  
Power Level—adjusts power level  
on frequencies.  
6
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Radio  
Viewing Contacts on the Map  
About Contacts  
1. Select Contacts.  
2. Select a contact.  
3. Select View Map.  
The first time a signal is received from  
another Rino user, the new contact  
page appears. From that page, you  
can show their location on the map,  
navigate to their location (page 16), or  
add them to your contacts list.  
Notes  
Note: Notes transmit to all users on  
your current channel and code.  
Adding a New Contact  
When a new contact signal is received,  
the new contact page appears.  
You can send notes to other Rino users  
on your current channel and code. You  
can review previously received notes  
from your contacts. You can edit and  
save favorite notes to quickly send  
them later.  
Select oK to save the contact.  
Editing Contacts  
1. Select Contacts.  
2. Select a contact.  
3. Select an item.  
4. Select  
.
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
   
Radio  
Creating a Note  
1. Select Notes > <Send Note> <New  
Note>.  
About Peer-to-Peer  
Positioning  
You can send your location to another  
Rino using peer-to-peer positioning.  
You can also track the movement of  
other Rino users and navigate to their  
locations.  
2. Write the note.  
The maximum character limit is 13.  
3. Select  
.
4. Select an option:  
Enabling Peer-to-Peer  
Positioning  
Select Send Note to send  
without saving.  
Select Setup > Radio > Send  
Location > on.  
Select Save.  
Select Send and Save.  
Sending A Location  
Before you can send a location, you  
must enable peer-to-peer positioning  
(page 8).  
Sending a Favorite Note  
1. Select Notes > <Send Note>.  
2. Select a note to send.  
3. Select Send Note.  
1. Select Share Wirelessly > Send.  
2. Select Use UHF.  
3. Select a category.  
4. Select an item.  
5. Select Send.  
8
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Radio  
Radio Page Status  
Indicators  
Radio 1W  
Radio 2W  
Radio 5W  
Transmit power at  
1 wattsꢀ  
Transmit power at  
2 wattsꢀ  
Message  
Description  
Activity on  
channel  
A signal is being  
received, but does  
not match the current  
codeꢀ  
Transmit power at  
5 wattsꢀ  
Note: If your device battery is too  
low, the power level is decreased  
automatically.  
Radio Off  
The 2-way radio is  
turned offꢀ  
Receiving  
transmission  
The device  
is receiving a  
Status Bar Description  
transmission on the  
selected channelꢀ  
The radio is onꢀ  
The radio is receivingꢀ  
Ready to  
transmit  
UHF CBRS/PRS  
channel is selected  
and the device can  
transmitꢀ  
The radio is transmittingꢀ  
Peer-to-peer is enabled  
and is ready to transmit  
the positionꢀ  
Radio Status Description  
Radio --  
Radio feature is offꢀ  
The radio is muted  
(page 6)ꢀ  
Radio 1/2W Transmit power at  
1/2 wattsꢀ  
Rino 650 Owner’s Manual  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Waypoints and Tracks  
5. Select  
.
Waypoints and Tracks  
Deleting a Waypoint  
1. Select Waypoint Manager.  
Waypoints  
Waypoints are locations you record and  
store in the device.  
2. Select a waypoint.  
3. Select Delete Waypoint.  
Creating a Waypoint  
You can save your current location as  
a waypoint.  
Increasing the Accuracy of a  
Waypoint Location  
Waypoint averaging allows you to  
increase the accuracy of a waypoint  
location by collecting multiple samples  
of the waypoint location.  
Select Mark Waypoint.  
Finding a Waypoint  
1. Select Where to? > Waypoints.  
1. Select Waypoint Averaging.  
2. Select a waypoint.  
3. Move to the location.  
4. Select Start.  
2. Select a waypoint.  
Editing a Waypoint  
Before you can edit a waypoint, you  
must create a waypoint.  
5. When the sample confidence status  
1. Select Waypoint Manager.  
2. Select a waypoint.  
bar reaches 100%, select Save.  
For best results, collect four to  
eight samples for the waypoint,  
waiting at least 90 minutes between  
samples.  
3. Select an item to edit.  
4. Enter the new information.  
10  
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Waypoints and Tracks  
Managing Track Log Recording  
1. Select Setup > tracks > track  
Log.  
About Sharing Data  
Your device can send or receive data  
when connected to another compatible  
device. You can share waypoints,  
geocaches, routes, and tracks.  
2. Select Record, Do Not Show or  
Record, Show on Map.  
If you select Record, Show on  
Map, a line on the map indicates  
your track.  
Sending and Receiving Data  
Wirelessly  
Before you can share data wirelessly,  
you must be within 3 m (10 feet) of the  
compatible Garmin device.  
3. Select Record Method.  
4. Select an option:  
To record tracks at a variable  
rate that creates an optimum  
representation of your tracks,  
select Auto.  
1. Select Share Wirelessly.  
2. Follow the on-screen instructions.  
Tracks  
To record tracks at a specified  
distance, select Distance.  
A track is a recording of your path.  
The track log contains information  
about points along the recorded path,  
including time, location, and elevation  
for each point.  
To record tracks at a specified  
time, select time.  
5. Select Recording Interval.  
6. Select an option to record tracks  
more or less often.  
Rino 650 Owner’s Manual  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Waypoints and Tracks  
Note: Using the Most often  
interval provides the most track  
detail and fills up the device  
memory quicker.  
Select Save Portion, and select  
a portion.  
Clearing the Current Track  
Select Setup > Reset > Clear  
Current track > Yes.  
Viewing the Current Track  
The track being recorded is called the  
current track.  
Deleting a Track  
1. Select track Manager.  
1. Select track Manager > Current  
track.  
2. Select a track.  
3. Select Delete > Yes.  
2. Select an option:  
To show the current track on the Navigating a Saved Track  
map, select View Map.  
You must record and save a track  
before you can navigate using it.  
To show the elevation plot  
for the current track, select  
elevation Plot.  
1. Select track Manager.  
2. Select a saved track.  
3. Select View on Map.  
4. Select Go.  
Saving the Current Track  
1. Select track Manager > Current  
track.  
2. Select what you want to save:  
Select Save track.  
12  
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Navigation  
2. Select an item you want to search  
Navigation  
near.  
3. Select Use.  
Navigating to a  
4. Navigate using the map (page 14)  
or compass (page 14).  
Destination  
You can use the Where To? menu to  
find a destination to navigate to. Not all  
Where To? categories are available in  
all areas and maps.  
Starting a TracBack®  
You can navigate back to the beginning  
of a track. This can be helpful when  
finding your way back to camp or the  
trail head.  
1. Select Where to?.  
2. Select an item.  
3. Select Go.  
1. Select track Manager > Current  
track > View Map.  
4. Navigate using the map (page 14)  
or compass (page 14).  
2. Select tracBack.  
The map page opens with your  
route marked with a magenta line.  
Searching Near a Location  
You can use the search feature to find  
POIs near a point on the map, your  
current location, or a waypoint. This  
may require additional maps, see  
3. Navigate using the map (page 14)  
or compass (page 14).  
Stopping Navigation  
Select Where to? > Stop  
Navigation.  
1. Select Where to? >  
.
Rino 650 Owner’s Manual  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Navigation  
Map  
Compass  
represents your location on the map. The device has a 3-axis compass. You  
As you travel, the moves. When you can use a bearing pointer or a course  
are navigating to a destination, your  
route is marked with a magenta line.  
pointer to navigate to your destination.  
To customize the compass settings, see  
To customize the map settings, see  
page 22. To customize the map  
dashboard and data fields, see page 20.  
Calibrating the Compass  
Notice  
Using the Map  
You can use the map to navigate an  
active route.  
Calibrate the electronic compass  
outdoors. Do not stand near objects that  
influence magnetic fields, such as cars,  
buildings, or overhead power lines.  
1. Select Map.  
2. Follow the magenta route line to  
your destination.  
You should calibrate the compass after  
moving long distances, experiencing  
temperature changes, or changing the  
batteries.  
1. From the compass page, touch and  
hold the middle of the compass.  
2. Follow the on-screen instructions.  
14  
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Navigation  
Navigating with the Bearing  
Pointer  
When navigating to a destination,  
the bearing pointer points to your  
destination, regardless of the direction  
you are moving.  
1. Begin navigation to a destination  
(page 13).  
The course pointer  
relationship to a course line  
to the destination. The course line  
to your destination is based on your  
original starting point.  
indicates your  
leading  
2. Select Compass.  
3. Turn until points toward the  
top of the compass, and continue  
moving in that direction to the  
destination.  
As you drift from the intended course  
to the destination, the course deviation  
About the Course Pointer  
The course pointer is most useful if you  
are navigating on water or where there  
are no major obstacles in your path.  
indicator  
(CDI) provides the  
indication of drift (right or left) from  
the course.  
The scale  
refers to the distance  
between dots on the course deviation  
indicator.  
Rino 650 Owner’s Manual  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Navigation  
Navigating with the Course Pointer  
Before you can navigate with the  
course pointer, you must change the  
pointer setting to Course (CDI)  
(page 25).  
Geocaches  
Geocaching is a type of treasure  
hunting, in which geocachers seek  
hidden treasures using GPS coordinates  
posted on the Internet by those hiding  
the geocache.  
1. Begin navigation to a destination  
(page 13).  
Downloading Geocaches  
1. Connect your device to a computer  
(page 37).  
2. Select Compass.  
3. Use the course pointer to navigate  
to the destination (page 15).  
2. Go to www.OpenCaching.com.  
3. If necessary, create an account.  
4. Sign in.  
Navigating to a Contact  
Before you can navigate to a contact,  
you must save a contact (page 7).  
5. Follow the on-screen instructions  
to find and download geocaches to  
your device.  
1. Select Contacts.  
2. Select a contact.  
Navigating to a Geocache  
1. Select Geocaches.  
3. Select View Map > Go.  
2. Select Find a Geocache.  
3. Select a geocache.  
4. Select Go.  
16  
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Navigation  
Editing a Route  
1. Select Route Planner.  
Routes  
A route is a sequence of waypoints that  
leads you to your final destination.  
2. Select a route.  
3. Select edit Route.  
4. Select a point.  
Creating a Route  
1. Select Route Planner > Create  
Route > Select First Point.  
5. Select an option:  
To view the point on the map,  
select Review.  
2. Select a category.  
3. Select the first point in the route.  
4. Select Use > Select Next Point.  
To change the order of the point  
on the route, select Move Down  
or Move Up.  
5. Repeat steps 2–4 until the route is  
complete.  
To add an additional point on  
the route, select Insert.  
A route must contain at least two  
points.  
The additional point is inserted  
before the point you are editing.  
6. Select  
to save the route.  
Editing the Name of a Route  
1. Select Route Planner.  
To remove the point from the  
route, select Remove.  
2. Select a route.  
6. Select  
to save the route.  
3. Select Change Name.  
4. Enter the new name.  
5. Select  
.
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
 
Navigation  
Viewing a Route on the Map  
1. Select Route Planner.  
Using Sight ‘N Go  
You can point the device at an object in  
the distance, such as a lighthouse, lock  
in the direction, and then navigate to  
the object.  
2. Select a route.  
3. Select View Map.  
Deleting a Route  
1. Select Route Planner.  
1. Select Sight ‘N Go.  
2. Point the device at an object.  
2. Select a route.  
3. Select Lock Direction > Set  
Course.  
3. Select Delete Route.  
Viewing the Active Route  
1. While navigating a route, select  
Active Route.  
4. Use the compass to navigate to the  
object.  
2. Select a point in the route to view  
additional details.  
Starting Navigation to a  
Man Overboard Location  
You can save a man overboard (MOB)  
location, and start navigation back to it.  
Reversing a Route  
1. Select Route Planner.  
2. Select a route.  
1. Select Man overboard > Start.  
3. Select Reverse Route.  
The map page opens with your  
route marked with a magenta line.  
2. Navigate using the map (page 14)  
or compass (page 14).  
18  
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Customizing Your Device  
Select to delete the icon.  
Customizing Your  
Device  
Creating a Custom Profile  
You can customize your settings and  
data fields for a particular activity or  
trip.  
Customizing the Data  
Fields  
You can customize the data fields that  
appear on the screen. For data field  
descriptions, see page 40.  
1. Customize the settings as necessary  
(page 21).  
2. Customize the data fields as  
necessary (page 19).  
1. Select a data field to change.  
2. Select a data field data field from  
the list.  
3. Select Setup > Profiles.  
4. Select Create New Profile > oK.  
Customizing the Home  
Screen  
Editing a Profile Name  
1. Select Setup > Profiles.  
You can customize the pages as they  
appear on your device home screen.  
2. Select a profile.  
3. Select edit Name.  
4. Enter the new name.  
1. Select Setup > Main Menu.  
2. Select an icon you want to edit.  
3. Select an option:  
5. Select  
.
Select a new position for the  
icon.  
Rino 650 Owner’s Manual  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Customizing Your Device  
1. Open the page for which you will  
change the data fields.  
Deleting a Profile  
1. Select Setup > Profiles.  
2. Select a data field to customize.  
3. Select a data field type.  
2. Select a profile.  
3. Select Delete.  
For data field descriptions, see  
Customizing Specific  
Pages  
You can customize the data and  
dashboards of the map, compass, trip  
computer, and elevation plot.  
About Dashboards  
Each dashboard shows different  
information about your route or your  
location.  
Enabling the Map Data Fields  
By default, the map does not show data  
fields. You must enable the data fields  
before you can edit them.  
Customizing Dashboards  
1. Open the page for which you want  
to customize the dashboard.  
2. Select an option:  
1. Select Setup > Map > Data Fields.  
For the trip computer and  
compass, select  
2. Select the number of data fields to  
display.  
.
For the map, select Setup >  
Map.  
Changing the Data Fields  
Before you can change the map fields,  
you must enable them (page 20).  
3. Select a dashboard.  
20  
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Customizing Your Device  
Garmin Spanner—allows  
you to use the USB port with  
most NMEA 0183-compliant  
mapping programs by creating a  
virtual serial port.  
System Settings  
Select Setup > System.  
GPS—sets the GPS to Normal,  
WAAS/eGNoS (Wide Area  
Augmentation System/European  
Geostationary Navigation Overlay  
Service), or Demo Mode (GPS  
off). For information about WAAS,  
Garmin Serial—Garmin  
proprietary format used to  
provide PVT protocol data.  
NMeA In/out—provides  
standard NMEA 0183 output  
and input.  
Language—sets the text language  
on the device.  
text out—provides simple  
ASCII text output of location  
and velocity information.  
Note: Changing the text language  
does not change the language of  
user-entered data or map data, such  
as street names.  
RtCM—Radio Technical  
Commission for Maritime  
Services allows the device  
to accept DGPS Differential  
Global Positioning System  
information from a device  
supplying RTCM data in an  
SC-104 format.  
Battery type—allows you to select  
the type of battery you are using  
with the optional Alkaline battery  
pack (page 34).  
Interface—sets the format of the  
serial interface:  
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
   
Customizing Your Device  
1. Select Setup > Display > Screen  
Calibration.  
Display Settings  
Select Setup > Display.  
2. Follow the on-screen instructions.  
Backlight timeout—adjusts the  
length of time before the backlight  
turns off.  
Setting the Device Tones  
You can customize tones for messages,  
keys, turn warnings, and alarms.  
Note: To adjust the backlight  
brightness, see page 4.  
1. Select Setup > tones.  
Background Color—sets the color  
used on the device screen.  
2. Select a tone for each audible type.  
Screen Capture—allows you to  
take screen captures on the device.  
Map Settings  
Select Setup > Map.  
Battery Save—turns the screen  
off after a period of inactivity to  
prolong the battery life.  
orientation—adjusts how the map  
is shown on the page.  
Screen Calibrationpage 22.  
North Up—shows north at the  
top of the page.  
Calibrating the Touchscreen  
The screen does not normally require  
calibration. However, if the screen does  
not seem to be responding properly,  
calibrate the touchscreen.  
track Up—shows your current  
direction of travel toward the  
top of the page.  
22  
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Customizing Your Device  
Automotive Mode—shows an  
automotive perspective with  
next-turn information to use  
while driving.  
Shaded Relief—shows detail  
relief on the map (if available)  
or turns off shading.  
Map Information—allows you to  
enable or disable the maps currently  
loaded on the device. To purchase  
additional maps, see page 39.  
Auto Zoom—automatically selects  
the appropriate zoom level for  
optimal use on your map. When  
off is selected, you must zoom in  
or out manually.  
Tracks Settings  
Select Setup > tracks.  
Data Fieldspage 40.  
Advanced Map Setup—sets the  
zoom levels, the text size, and the  
detail level of the map.  
track Log—turns track recording  
on or off.  
Record Method:  
Zoom Levels—selects the zoom  
level for map items.  
Distance—allows you to record  
by entering a specific distance  
interval.  
text Size—selects the text size  
for map items.  
time—allows you to record by  
entering a specific time.  
Detail—selects the amount  
of detail shown on the map.  
Showing more detail may cause  
the map to redraw more slowly.  
Auto—allows you to record the  
tracks at a variable rate to create  
an optimum representation of  
your tracks.  
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
 
Customizing Your Device  
Interval—selects a track log  
recording rate. Recording points  
more frequently creates a more-  
detailed track, but fills the track log  
faster.  
Time Settings  
Select Setup > time.  
time Format—allows you to  
select a 12-hour or a 24-hour  
display time.  
Auto Archive—selects an  
automatic archive method to  
organize your tracks. Tracks are  
saved and cleared automatically  
based on the user setting.  
time Zone—allows you to select  
the time zone for the device. You  
can select Automatic to set the  
time zone automatically based on  
your GPS position.  
Color—changes the color of the  
track line on the map.  
Position Format Settings  
Note: Do not change the position  
format or the map datum coordinate  
system unless you are using a map or  
chart that specifies a different position  
format.  
Changing the Units of  
Measure  
You can customize units of measure for  
distance and speed, elevation, depth,  
temperature, and pressure.  
Select Setup > Position Format.  
1. Select Setup > Units.  
Position Format—sets the position  
format in which a given location  
reading appears.  
2. Select a measurement type.  
3. Select a unit of measure for the  
setting.  
24  
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Customizing Your Device  
Map Datum—sets the coordinate  
system on which the map is  
structured.  
Course (CDI)—your  
relationship to a course line  
leading to a destination.  
Map Spheroid—shows the  
coordinate system the device is  
using. The default coordinate  
system is WGS 84.  
Compass—switches from an  
electronic compass to a GPS  
compass when you are traveling  
at a higher rate of speed for a set  
period of time (Auto), or turns the  
compass off.  
Heading Settings  
You can customize the compass  
settings.  
Altimeter Settings  
Select Setup > Altimeter.  
Select Setup > Heading.  
Auto Calibration—allows the  
altimeter to self-calibrate each time  
you turn the device on.  
Display—sets the type of  
directional heading on the compass.  
North Reference—sets the north  
reference of the compass.  
Barometer Mode  
Variable elevation—the  
barometer functions while you  
are moving.  
Go to Line/Pointer—allows you  
to select how the course appears.  
Bearing (Small or Large)—the  
direction to your destination.  
Fixed elevation—the  
barometer functions while you  
are stationary.  
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
   
Customizing Your Device  
Pressure trending  
Calibrate Altimeterpage 26.  
Save When Power on—  
Calibrating the Barometric  
Altimeter  
You can manually calibrate the  
barometric altimeter if you know  
the correct elevation or the correct  
pressure.  
records pressure data only when  
the device is turned on. This  
can be useful when you are  
watching for pressure fronts.  
Save Always—records pressure  
data every 15 minutes, even  
when the device is turned off.  
1. Select Setup > Altimeter.  
2. Select Altimeter Calibration.  
3. Follow the on-screen instructions.  
Plot type  
elevation/time—records  
elevation changes over a period  
of time.  
Geocache Settings  
Select Setup > Geocaches.  
elevation/Distance—records  
elevation changes over a  
distance.  
Geocache List—allows you to  
display the geocache list by names  
or codes.  
Barometric Pressure—records  
barometric pressure over a  
period of time.  
Found Geocaches—allows you  
to edit the number of geocaches  
found. This number automatically  
increases as you log a find.  
Ambient Pressure—records  
ambient pressure changes over a  
period of time.  
26  
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Customizing Your Device  
on Road For Distance—  
calculates on-road routes that  
are shorter in distance.  
Filter—filters a geocache list for  
certain factors, such as level of  
difficulty.  
chirpSearching—turns on or off  
chirp searching. A chirp is a small  
accessory that you can program and  
leave in a geocache.  
Program chirp—programs the  
chirp accessory. See the chirp  
Owners Manual at www.garmin  
.com.  
Prompted—allows you to  
select a route calculation mode  
before navigating.  
Calculates Routes for—optimizes  
the routes for the selected  
transportation method.  
Lock on Road—locks the  
position icon, which represents  
your position on the map, onto the  
nearest road.  
Routing Settings  
Select Setup > Routing.  
off Road transitions  
Guidance Method—sets the  
calculation and guidance method  
for your routes.  
Auto—automatically routes you  
to the next point.  
Manual—allows you to select  
the next point on the route.  
off Road—calculates point-to-  
point routes.  
Distance—routes you to the  
next point on the route when  
you are within a specified  
distance of your current point.  
on Road For time—calculates  
on-road routes that require  
minimal time to drive.  
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
 
Customizing Your Device  
Avoidance Setup—allows you to  
select the road type you want to  
avoid.  
Marine Alarm Setup  
Anchor Drag Alarm—alarm  
sounds when you exceed a  
specified drift distance while  
anchored.  
Marine Map Settings  
Select Setup > Marine.  
off Course Alarm—alarm  
sounds when you are off course  
by a specified distance.  
Marine Chart Mode:  
Nautical—displays various map  
features in different colors so  
that the marine POIs are more  
readable. The nautical chart  
reflects the drawing scheme of  
paper charts.  
Deep Water/Shallow Water—  
alarm sounds when you enter  
water of a specific depth.  
Setting up Marine Alarms  
1. Select Setup > Marine > Marine  
Alarm Setup.  
Fishing—(requires marine  
maps) displays a detailed view  
of bottom contours and depth  
soundings. Simplifies map  
presentation for optimal use  
while fishing.  
2. Select an alarm type.  
3. Select on.  
4. Enter a distance.  
5. Select  
.
Appearance—allows you to set the  
appearance of marine navigation  
aids on the map.  
28  
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Tools  
Fitness  
For more information on optional  
fitness accessories, see page 39.  
Resetting Data  
You can reset trip data, delete all  
waypoints, clear the current track, or  
restore default values.  
1. Select Setup > Reset.  
2. Select an item to reset.  
Restoring Default Settings  
You can reset all the setup values to the  
original settings.  
Select Setup > Reset > Reset  
Defaults to Factory Settings >  
Yes.  
Rino 650 Owner’s Manual  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Tools  
Viewing the Calendar and  
Almanacs  
Tools  
You can view device activity for each  
day, as well as almanac information  
for the sun and moon information and  
hunting and fishing.  
Trip Computer  
The trip computer displays your current  
speed, average speed, maximum  
speed, trip odometer, and other  
helpful statistics. To customize the trip  
computer, see page 20.  
1. Select an option:  
To view device activity for  
specific days, select Calendar.  
Elevation Plot  
To view the sunrise, sunset,  
moonrise, and moonset  
information, select Sun and  
Moon.  
By default, the elevation plot displays  
the elevation for an elapsed time. To  
customize the elevation plot, see  
To view the predicted best times  
for hunting and fishing, select,  
Hunt and Fish.  
2. If necessary, use the arrows to view  
a different month.  
3. Select a day.  
30  
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Tools  
Calculating the Size of an Opening the Stopwatch  
Area  
Select Stopwatch.  
1. Select Area Calculation > Start.  
2. Walk around the perimeter of the  
area you want to calculate.  
3. Select Calculate when finished.  
Setting an Alarm  
If you are not currently using the  
device, you can set the device to turn  
on at a specific time.  
1. Select Alarm Clock.  
2. Select + and - to set the time.  
3. Select turn Alarm on.  
4. Select an option.  
The alarm sounds at the selected time.  
If the device is off at the alarm time,  
the device turns on and sounds the  
alarm.  
Rino 650 Owner’s Manual  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Device Information  
Specifications  
Device Information  
Water  
Fully gasketed, high  
resistance  
impact plastic alloy,  
water resistant to IEC  
60529 IPX7  
Updating the Software  
Before you can update the software,  
you must connect the device to your  
computer (page 37).  
Battery type  
Lithium-ion battery  
pack (010-11599-00)  
or optional Alkaline  
battery pack (010-  
11600-00), which  
uses four AA batteries  
(alkaline, NiMH, or  
lithium)  
2. Follow the on-screen instructions.  
Note: Updating the software does not  
erase any of your data or settings.  
Battery life  
Up to 14 hours,  
typical usage using  
the lithium-ion battery  
packꢀ  
Viewing Device  
Information  
You can view the unit ID, software  
version, and license agreement.  
Up to 18 hours,  
typical usage using  
AA batteries (in  
optional Alkaline  
battery pack)  
Select Setup > About.  
32  
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Device Information  
Do not use a sharp object to remove  
batteries.  
Battery  
From 0°C to 45°C  
(from 32°F to 113°F)  
charging  
temperature  
range  
Notice  
Contact your local waste disposal  
department to properly recycle the  
batteries.  
Operating  
temperature  
range  
From -20°C to 60°C  
(from -4°F to 140°F)  
About the Batteries  
Maximizing Battery Life  
You can do various things to increase  
the battery life.  
WARNING  
See the Important Safety and Product  
Information guide in the product  
box for product warnings and other  
important information.  
Turn the backlight off when not  
needed.  
Lower the backlight brightness  
(page 4).  
The temperature rating for the device  
may exceed the usable range of some  
batteries. Alkaline batteries can rupture  
at high temperatures. Alkaline batteries  
lose a significant amount of their  
Decrease the backlight timeout  
(page 22).  
Enable battery save mode  
(page 22).  
capacity as temperature decreases. Use  
lithium batteries when operating the  
device in below-freezing conditions.  
Rino 650 Owner’s Manual  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Device Information  
Installing the Alkaline Battery Pack  
1. Turn the D-ring counter-clockwise,  
and remove the lithium-ion battery  
pack.  
Long-Term Storage  
When you do not plan to use the  
device for several months, remove the  
batteries. Stored data is not lost when  
batteries are removed.  
2. Lift the latch on the Alkaline  
battery pack to open the battery  
compartment.  
Alkaline Battery Pack  
The Alkaline battery pack is an  
optional accessory. The Alkaline  
battery pack uses alkaline, NiMH, or  
lithium batteries. This is especially  
handy when you are on the trail and  
cannot charge the lithium-ion battery  
pack. Use NiMH or lithium batteries  
for best results.  
3. Insert four AA batteries, observing  
polarity.  
For more information, go to  
http://buy.garmin.com or contact your  
Garmin dealer.  
4. Replace the battery cover, and turn  
the D-ring clockwise.  
5. Select Setup > System > Battery  
type.  
6. Select Alkaline, Lithium, or  
Rechargeable NiMH.  
34  
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Device Information  
Water Immersion  
Caring for the Device  
Notice  
Notice  
The device is waterproof to IEC  
Standard 60529 IPX7. It can withstand  
immersion in 1 meter of water for 30  
minutes. Prolonged submersion can  
cause damage to the device. After  
submersion, be certain to wipe dry  
and air dry the device before using or  
charging.  
Avoid chemical cleaners and solvents  
that can damage plastic components.  
Never use a hard or sharp object to  
operate the touchscreen, or damage  
may result.  
Cleaning the Device  
1. Dampen a clean cloth with a mild  
detergent solution.  
Extreme Temperatures  
2. Wipe the device with the damp  
cloth.  
Notice  
Do not store the device where  
prolonged exposure to extreme  
temperatures can occur, because it can  
cause permanent damage.  
3. Thoroughly dry the device.  
Cleaning the Screen  
1. Dampen a soft, clean, lint-free cloth  
with water, isopropyl alcohol, or  
eyeglass lens cleaner.  
2. Wipe the screen with the cloth.  
3. Thoroughly dry the screen.  
Rino 650 Owner’s Manual  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Device Information  
1. Turn the D-ring counter-clockwise,  
and remove the battery pack.  
Data Management  
Note: The device is not compatible  
with Windows® 95, 98, Me, or NT. It is  
also not compatible with Mac® OS 10.3  
and earlier.  
2. Slide the card holder  
toward  
the top edge of the device, and  
lift up, as instructed in the battery  
compartment.  
File Types  
The device supports these file types.  
Files from BaseCampor  
HomePort™  
Go to www.garmin.com.  
GPI custom POI files from the  
Garmin POI Loader  
3. Place the microSD card  
in the  
JPEG photo files  
device with the contacts facing  
down.  
GPX geocache files  
4. Close the card holder.  
Installing a microSDCard  
Memory cards can be used for  
additional storage. Also, some maps  
are available preloaded on memory  
cards. Go to http://buy.garmin.com for  
more information.  
5. Slide the card holder toward the  
bottom of the device to lock it.  
6. Replace the battery pack, and turn  
the D-ring clockwise.  
36  
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Device Information  
Connecting the Device to a  
Computer  
1. Connect the USB cable to a USB  
port on your computer.  
Transferring Files to Your  
Computer  
Before you can transfer files, you must  
connect the device to your computer  
(page 37).  
2. Pull up the weather cap from the  
mini-USB port  
.  
1. Browse your computer for the file.  
2. Select the file.  
3. Select edit > Copy.  
4. Open the “Garmin” or memory card  
drive/volume.  
tIP: You must put photo files in the  
Garmin\JPEG folder. You must put  
geocache files in the Garmin\GPX  
folder.  
3. Plug the small end of the USB  
cable into the mini-USB port.  
5. Select edit > Paste.  
Your device and memory card  
(optional) appear as removable  
drives in My Computer on Windows  
computers and as mounted volumes on  
Mac computers.  
Rino 650 Owner’s Manual  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Device Information  
4. Press the Delete key on your  
Deleting Files  
keyboard.  
Notice  
Disconnecting the USB Cable  
1. Complete an action:  
If you do not know the purpose of  
a file, do not delete it. Your device  
memory contains important system  
files that should not be deleted. Be  
especially cautious of folders entitled  
“Garmin.”  
For Windows computers, click  
the eject icon  
tray.  
in your system  
For Mac computers, drag the  
volume icon to the Trash  
.
Notice  
2. Disconnect the device from your  
computer.  
Your device memory contains  
important system files and folders that  
should not be deleted.  
Before you can delete files, you must  
connect the device to your computer  
(page 37).  
1. Open the “Garmin” drive or  
volume.  
2. If necessary, open a folder or  
volume.  
3. Select the files.  
38  
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix  
must install the accessory according  
to the instructions included with the  
accessory.  
Appendix  
Additional Maps  
You can use optional fitness accessories  
including a heart rate monitor or a  
cadence sensor with your device.  
You can use additional maps in the  
device, such as BirdsEye satellite  
imagery, BlueChart® g2, and City  
Navigator® detailed maps. Detailed  
maps may contain additional points of  
interest, such as restaurants or marine  
services. For more information, go to  
http://buy.garmin.com or contact your  
Garmin dealer.  
These accessories use ANT+wireless  
technology to send data to the device.  
Using Optional Fitness  
Accessories  
1. Bring the device within 3 m of the  
ANT+ accessory.  
2. Select Setup > Fitness.  
Optional Accessories  
3. Select Heart Rate Monitor or  
Bike Cadence Sensor.  
Optional accessories, such as mounts,  
preloaded map memory cards, fitness  
accessories, and replacement parts, are  
available at http://buy.garmin.com or  
from your Garmin dealer.  
4. Select Search for New.  
5. Customize your data fields to view  
the heart rate or cadence data  
(page 40).  
Optional Fitness Accessories  
Before you can use the fitness  
accessory with your device, you  
Rino 650 Owner’s Manual  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Appendix  
Tips for Pairing ANT+ Accessories  
with Your Garmin Device  
other accessories.  
Verify that the ANT+ accessory  
is compatible with your Garmin  
device.  
Data Field Options  
Data Field  
Description  
Accuracy of  
GPS  
The margin of  
Before you pair the ANT+  
accessory with your Garmin device,  
move 10 m away from other ANT+  
accessories.  
error for your exact  
locationꢀ For example,  
your GPS location is  
accurate to within +/-  
3ꢀ6 m (12 feet)ꢀ  
Bring the Garmin device within  
3 m of the ANT+ accessory.  
Ambient  
Pressure  
The uncalibrated  
environmental  
pressureꢀ  
After you pair the first time, your  
Garmin device automatically  
recognizes the ANT+ accessory  
each time it is activated. This  
process occurs automatically when  
you turn on the Garmin device and  
only takes a few seconds when  
the accessories are activated and  
functioning correctly.  
Ascent -  
Average  
The average vertical  
distance of ascentꢀ  
Ascent -  
Maximum  
The maximum ascent  
rate in meters (or feet)  
per minuteꢀ  
Ascent - Total The total elevation  
distance ascendedꢀ  
Barometer  
The calibrated current  
pressureꢀ  
When paired, your Garmin device  
only receives data from your  
accessory, and you can go near  
Battery Level The remaining battery  
powerꢀ  
40  
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Appendix  
Data Field  
Description  
Data Field  
Description  
Bearing  
The direction from  
your current location  
to a destinationꢀ  
Distance to  
Destination  
The distance to your  
final destinationꢀ  
Distance to  
Next  
The remaining  
distance to the next  
waypoint on the routeꢀ  
Cadence  
(cadence  
accessory  
required)  
Revolutions of the  
crank arm or strides  
per minuteꢀ  
Elevation  
The altitude of your  
current location above  
or below sea levelꢀ  
Course  
The direction from  
your starting location  
to a destinationꢀ  
Elevation -  
Maximum  
The highest elevation  
reachedꢀ  
Depth  
The depth of the  
Elevation -  
Minimum  
The lowest elevation  
reachedꢀ  
waterꢀ Requires a  
connection to a NMEA  
0183 depth-capable  
device to acquire data  
(page 21)ꢀ  
ETA at  
Destination  
The estimated time  
of day you will reach  
your final destinationꢀ  
ETA at Next  
Glide Ratio  
The estimated time of  
day you will reach the  
next waypoint on the  
routeꢀ  
Descent -  
Average  
The average vertical  
distance of descentꢀ  
Descent -  
Maximum  
The maximum  
descent rate in meters  
(or feet) per minuteꢀ  
The ratio of horizontal  
distance traveled to  
the change in vertical  
distanceꢀ  
Descent - Total The total elevation  
distance descendedꢀ  
Rino 650 Owner’s Manual  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Data Field  
Description  
Data Field  
Description  
Glide Ratio to The glide ratio  
Odometer  
A running tally of  
distance traveled for  
all tripsꢀ  
Destꢀ  
required to descend  
from your current  
position and elevation  
to the destination  
elevationꢀ  
Off Course  
The distance to  
the left or the right  
by which you have  
strayed from the  
GPS Signal  
Strength  
The strength of the  
GPS signalꢀ  
original path of travelꢀ  
Heading  
The direction you are  
movingꢀ  
Pointer  
Speed  
The data field arrow  
points in the direction  
of the next waypoint  
or turnꢀ  
Heart Rate  
(heart rate  
monitor  
Your heart rate in  
beats per minute  
(bpm)ꢀ  
The current rate of  
speed at which you  
are moving since last  
resetꢀ  
required)  
Location (lat/ Displays the current  
lon)  
position in the default  
position format  
regardless of the  
selected settingsꢀ  
Speed -  
Maximum  
The maximum speed  
reached since last  
resetꢀ  
Location  
(selected)  
Displays the current  
position in the  
selected position  
formatꢀ  
Speed -  
Moving Avgꢀ  
The average speed  
of the device while  
moving since last  
resetꢀ  
42  
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix  
Data Field  
Description  
Data Field  
Description  
Speed -  
Overall Avgꢀ  
Your average speed  
since last resetꢀ  
Time to Next  
The estimated time  
needed to reach the  
next waypoint on the  
routeꢀ  
Sunrise  
The time of sunrise  
based on your GPS  
positionꢀ  
To Course  
The direction in which  
you must move to  
return to the routeꢀ  
Sunset  
The time of sunset  
based on your GPS  
positionꢀ  
Trip Odometer A running tally of the  
distance traveled  
Temperature - The temperature of  
Water  
since the last resetꢀ  
the waterꢀ Requires a  
connection to a NMEA  
0183 temperature-  
capable device to  
acquire data  
Trip Time -  
Moving  
A running tally of time  
since the last resetꢀ  
Trip Time -  
Stopped  
The time spent not  
moving since the last  
resetꢀ  
(page 21)ꢀ  
Time of Day  
The current time of  
day based on your  
time settings (format,  
time zone, and  
Trip Time -  
Total  
A running tally of  
distance traveled  
since the last resetꢀ  
daylight saving time)ꢀ  
Time to  
Destination  
The estimated time  
needed to reach your  
final destinationꢀ  
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
43  
 
Appendix  
Data Field  
Description  
Turn  
The angle of  
difference (in  
degrees) between  
the bearing to your  
destination and your  
current courseꢀ L  
means turn leftꢀ R  
means turn rightꢀ  
Velocity Made The speed at which  
Good  
you are closing on a  
destination along a  
routeꢀ  
Vertꢀ Speed to The measurement  
Destꢀ  
of your rate of  
ascent or descent  
to a predetermined  
altitudeꢀ  
Vertical Speed Your rate of altitude  
gain or loss over timeꢀ  
Waypoint at  
Destꢀ  
The last point on  
a route to your  
destinationꢀ  
Waypoint at  
Next  
The next point on  
your routeꢀ  
44  
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix  
Troubleshooting  
Problem  
Solution  
The screen does not  
respondꢀ How do I  
reset the device?  
1ꢀ Remove the batteriesꢀ  
2ꢀ Reinstall the batteriesꢀ  
NOTE: This does not erase any of your data or settingsꢀ  
I want to reset all the Select Setup > Reset > Restore Defaults to Factory  
customized settings  
back to the factory  
defaultsꢀ  
Settingsꢀ  
My device does not  
acquire satellite  
signalsꢀ  
1ꢀ Take your device out of parking garages and away  
from tall buildings and treesꢀ  
2ꢀ Turn on the deviceꢀ  
3ꢀ Remain stationary for several minutesꢀ  
My device will not  
chargeꢀ  
Ensure the lithium-ion battery is properly installed  
(page 3)ꢀ  
Ensure the temperature is between 0 and 45°C (32°F  
and 113°F)ꢀ  
Turn down the backlight (page 4)ꢀ  
My battery gauge does 1ꢀ Leave the device on until the battery runs outꢀ  
not seem accurateꢀ  
2ꢀ Fully charge the battery without interrupting the  
charge cycleꢀ  
The batteries do not  
last longꢀ  
To learn how to maximize the battery life, see page 33ꢀ  
Rino 650 Owner’s Manual  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix  
Problem  
Solution  
How do I know my  
On the device, an image of the device connected to a  
device is in USB mass computer appearsꢀ  
storage mode?  
On your computer, you should see a new removable  
disk drive in My Computer on Windows computers and a  
mounted volume on Mac computersꢀ  
My device is  
You may have loaded a corrupted fileꢀ  
1ꢀ Disconnect the device from your computerꢀ  
2ꢀ Turn off the deviceꢀ  
connected to the  
computer, but it will not  
go into mass storage  
modeꢀ  
3ꢀ Hold  
computerꢀ  
4ꢀ Continue holding  
goes into mass storage modeꢀ  
I cannot see any new If you have several network drives mapped on your  
while you connect the device to your  
for 30 seconds or until the device  
removable drives in  
my list of drivesꢀ  
computer, Windows may have trouble assigning drive  
letters to your Garmin drivesꢀ See the help file for your  
operating system to learn how to assign drive lettersꢀ  
I need replacement  
Go to http://buyꢀgarminꢀcom, or contact your Garmin  
parts or accessoriesꢀ dealerꢀ  
46  
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Index  
about 33  
charging 3  
navigating 16  
viewing on map 7  
course pointer 16  
creating  
routes 17  
waypoints 10  
customizing  
Index  
information 2  
installing 2  
maximizing life 33  
selecting the type 33  
storage 33  
A
AA batteries 34  
accessories 39, 46  
fitness 39  
acquiring satellite  
signals 45  
active route 18  
advanced map setup 23  
alarms  
warnings 33  
data fields 19  
device settings 21–28  
profiles 19  
beeps 22  
C
call 1  
D
clock 31  
marine 28  
tones for 22  
caring for the device 35  
long-term storage 34  
compass  
dashboard 20  
customizing 20  
data fields 19, 20  
options 40  
deleting  
altimeter  
calibrating 14  
navigating 15  
settings 25  
calibrating 26  
plot type 26  
files 38  
settings 25  
ANT+ accessories 39  
auto zoom 23  
connecting  
profiles 20  
routes 18  
tracks 12  
USB cable 37  
wireless accessories 39  
wirelessly 11  
contacts 7  
waypoints 10  
display  
B
backlight 4  
BaseCamp 36  
batteries 21, 32, 40  
accepting 7  
editing 7  
backlight 4  
backlight timeout 22  
Rino 650 Owner’s Manual  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
screen capture 22  
settings 22  
downloading  
software 32  
notes 7  
sending a note 7  
L
language 21  
locking screen 4  
O
orientation, map 22  
M
E
editing  
man overboard 18  
map 14  
P
Peer-to-Peer  
enabling 8  
positioning 8  
sending location 8  
position format 24  
power 2  
profiles, creating  
push-to-talk 2  
profiles 19  
routes 17  
waypoints 10  
elevation plot 12  
datum 25  
information 23  
showing tracks 12  
viewing routes 18  
map datum coordinate  
system 24  
F
fitness options 39  
marine settings 28  
G
N
geocaches 16, 26  
downloading 16  
navigating 16  
settings 26  
GPS signals 3, 40, 42, 45  
system settings 21  
navigating  
R
radio  
routes 18  
search 13  
to destination 13  
to geocaches 16  
to waypoints 10  
tracks 12  
channels 5  
icons 9  
scanning 5  
set up 6  
H
status indicators 9  
recording 11, 23  
registering your device 4  
with bearing pointer 15  
with course pointer 16  
north up 22  
heading settings 25  
headset 6  
HomePort 36  
48  
Rino 650 Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
reset  
current track 29  
version 32  
specifications 32  
stopwatch 31  
track up 22  
transferring files 37  
using USB 37  
data 29  
defaults 29  
trip data 29  
waypoints 29  
storing the device 35  
system settings 21  
wirelessly 11  
trip computer 30  
troubleshooting 44  
T
routes 17–18  
text size, maps 23  
time  
U
active route 18  
avoidance 28  
creating 17  
deleting 18  
editing 17  
guidance method 27  
navigating 18  
settings 27  
unit ID 32  
alarms 31  
updating software 32  
USB cable 46  
connecting 37  
disconnecting 38  
data fields 43  
settings 24  
stopwatch 31  
sunrise and sunset 43  
zone 24  
W
waypoints  
averaging 10  
creating 10  
deleting 10  
editing 10  
navigating to 10  
tones 22  
Tracback 13  
tracks  
S
satellite signals 3, 40,  
system settings 21  
scanlist  
setting up 5  
Sight ‘N Go 18  
software  
clearing current 12  
deleting 12  
navigating 12  
recording 11, 23  
saving 12  
Z
zoom 23  
setup 23  
updating 32  
viewing 12  
Rino 650 Owner’s Manual  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
913-397-8200  
1-800-800-1020  
0808 238 0000  
1-866-429-9296  
+44 870 850 1242  
43 (0) 3133 3181 0  
00 331 55 69 33 99  
815 69 555  
00 32 2 672 52 54  
00 45 4810 5050  
00 358 9 6937 9758  
0800-0233937  
0180 5 / 42 76 46 - 880  
00 39 02 3669 9699  
00 35 1214 447 460  
00800 4412 454  
+44 2380 662 915  
00 34 902 007 097  
00 46 7744 52020  
Garmin International, Inc  
1200 East 151st Street,  
Olathe, Kansas 66062, USA  
Garmin (Europe) Ltd.  
Liberty House, Hounsdown Business Park  
Southampton, Hampshire, SO40 9LR UK  
Garmin Corporation  
No. 68, Zhangshu 2nd Road, Xizhi Dist.  
New Taipei City, 221, Taiwan (R.O.C.)  
© 2011 Garmin Ltd. or its subsidiaries  
Download from Www.Somanuals.com. All Manuals Search And Download.  

EdgeStar Fan EAC211TS User Manual
Electro Voice Microphone 625HS User Manual
Escort Scanner 9500CI User Manual
Euro Pro Pressure Washer VPW38H User Manual
Field Controls Automobile Parts SWG 4HD User Manual
Fisher Price Baby Gym 73739 User Manual
Fostex Recording Equipment DMT 8VL User Manual
GE Air Conditioner AZ85E09EAC User Manual
GE Monogram Refrigerator ZISS360NMSS User Manual
Global Machinery Company Planer BFPCF User Manual