Owner’s
Manual
Downdraft Vent
System
ZVB30
ZVB36
Download from Www.Somanuals.com. All Manuals Search And Download.
Immediately contact the dealer (or builder)
that sold you the downdraft vent system.
If you
received a
damaged
downdraft
vent system
Save time
& money
Before you request service, check the Before
You Call For Service section in the back of
this guide.
It lists causes of minor operating problems that
you can correct yourself.
If you need
service
For customers in Canada:
To obtain service, see the Consumer Services
page in the back of this guide.
FIRST, contact the people who serviced your
appliance. Explain why you are not pleased.
In most cases, this will solve the problem.
We’re proud of our service and want you to be
pleased. If for some reason you are not happy
with the service you receive, here are two steps
to follow for further help.
NEXT, if you are still not pleased, write all the
details—including your phone number—to:
For customers in the USA:
Manager, Consumer Relations
Camco Inc.
1 Factory Lane, Suite 310
Moncton, N.B. E1C 9M3
FIRST, contact the people who serviced your
appliance. Explain why you are not pleased.
In most cases, this will solve the problem.
NEXT, if you are still not pleased, write all the
details—including your phone number—to:
Manager, Customer Relations
GE Appliances
Appliance Park
Louisville, KY 40225
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
WARNING!
For your safety, the information in this guide must be followed to minimize the risk of fire or
explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
WARNING!
—TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, OR INJURY TO PERSONS, OBSERVE THE
FOLLOWING:
Use this unit only in the manner intended • Ducted fans must always be vented to
A
by the manufacturer. If you have any
questions, contact the manufacturer.
the outdoors.
• Sufficient air is needed for proper combustion
and exhausting of gases through the flue
(chimney) of fuel-burning equipment to
prevent backdrafting. Follow the heating
equipment manufacturer’s guideline and
safety standards such as those published by the
National Fire Protection Association (NFPA),
and the American Society for Heating,
Before servicing or cleaning unit, switch
power off at service panel and lock the
service disconnecting means to prevent
power from being switched on accidentally.
When the service disconnecting means
cannot be locked, securely fasten a
prominent warning device, such as a tag,
to the service panel.
B
Refrigeration and Air Conditioning Engineers
(ASHRAE), and the local code authorities.
CAUTION: For general ventilating
use only. Do not use to exhaust hazardous or
explosive materials and vapors.
• To reduce the risk of fire, use only metal
ductwork.
• PVC sewer pipe can be used as duct under
concrete slab if allowed by local code board.
• Installation work and electrical wiring must
be done by qualified person(s) in accordance
with all applicable codes and standards,
including fire-rated construction.
• This unit must be grounded.
• When cutting or drilling into wall or ceiling,
do not damage electrical wiring and other
hidden utilities.
SAFETY PRECAUTIONS—WARNING TO REDUCE THE RISK
OF A RANGE TOP GREASE FIRE:
Never leave surface units unattended at
high settings. Boilovers cause smoking
and greasy spillovers that may ignite. Heat
oils slowly on low or medium settings.
Clean ventilating fans frequently. Grease
should not be allowed to accumulate on
fan or filter.
A
C
Use proper pan size. Always use cookware
appropriate for the size of the surface
element.
D
Always turn hood ON when cooking at
high heat or when cooking flaming foods.
B
4
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTRUCTIONS IMPORTANTES DE SÉCURITÉ
AVERTISSEMENT!
Pour votre sécurité, vous devez suivre les instructions de ce guide, afin de minimiser tout risque
d’incendie ou d’explosion, de secousse électrique ou d’empêcher tout dommage matériel,
blessure corporelle ou perte de vie humaine.
AVERTISSEMENT ! POUR RÉDUIRE TOUT RISQUE
D’INCENDIE, DE SECOUSSE ÉLECTRIQUE OU DE BLESSURE
CORPORELLE, SUIVEZ LES INSTRUCTIONS SUIVANTES :
N’utilisez cet appareil que de la manière
prévue par le fabricant. Si vous avez des
questions, contactez le fabricant.
• Quand vous coupez un mur ou un plafond,
ou quand vous faites un trou dans un mur ou
un plafond, veillez à ne pas endommager
le câblage électrique et les autres services
publics cachés.
A
Avant de réparer ou de nettoyer
B
votre appareil, débranchez le courant
au niveau du panneau de distribution
d’électricité et verrouillez le mécanisme
de débranchement du panneau pour
empêcher tout branchement accidentel
du courant. Si vous ne pouvez pas
verrouiller le mécanisme de
débranchement, attachez solidement
un avertissement visible, comme une
étiquette, au panneau de distribution.
• Les ventilateurs canalisés doivent toujours
avoir leur ouverture vers l’extérieur.
• Vous devez prévoir une aération suffisante
pour bien calciner et éliminer les gaz par la
cheminée de l’appareil à combustion, pour
empêcher tout retour de flamme. Suivez les
directives de l’appareil de chauffage et des
normes de sécurité telles que celles publiées
par la National Fire Protection Association
(NFPA) et l’American Society for Heating,
Refrigeration and Air Conditionning Engineers
(ASHRAE), ainsi que les instructions des
autorités qui émettent le code local.
ATTENTION :
Cet appareil
ne doit être utilisé qu’à des fins de ventilation
générale. Ne l’utilisez jamais pour ventiler
des vapeurs ou des matériaux explosifs ou
dangereux.
• Pour réduire le risque d’incendie, n’utilisez
que des canalisations métalliques.
• Tous travaux d’installation ou de câblage
doivent être effectués par une personne
qualifiée conformément à tous les codes et
toutes les normes en vigueur, y compris ceux
de construction résistant au feu.
• Vous pouvez utiliser comme canalisation
un tuyau d’égout en CPV sous une dalle
en béton, si l’autorité qui émet le code local
le permet.
• Vous devez mettre à la terre cet appareil.
PRÉCAUTIONS DE SÉCURITÉ—AVERTISSEMENT POUR
RÉDUIRE TOUT RISQUE D’INCENDIE DE GRAS SUR LE FOUR
Ne laissez jamais les unités chauffantes
de surface sans surveillance à une
température élevée. Les substances
bouillantes peuvent déborder en fumant
et en dégageant des graisses qui peuvent
prendre feu. Réchauffez les huiles
lentement à des températures basses
ou moyennes.
Nettoyez souvent les ventilateurs
d’aération. Vous ne devez permettre
aucune accumulation de graisse sur le
ventilateur ou sur le filtre.
A
C
Utilisez des ustensiles de cuisine de bonne
taille. Utilisez toujours des ustensiles de
cuisine qui correspondent à l’élément
chauffant de surface.
D
Mettez toujours en marche la hotte quand
vous cuisinez à haute température ou
quand vous cuisinez des aliments flambés.
B
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
SAFETY PRECAUTIONS—WARNING—TO REDUCE THE
RISK OF INJURY TO PERSONS IN THE EVENT OF A RANGE
TOP GREASE FIRE, OBSERVE THE FOLLOWING:*
SMOTHER FLAMES with a close-fitting lid,
cookie sheet, or metal tray, then turn off
the burner. BE CAREFUL TO PREVENT
BURNS. If the flames do not go out
immediately, EVACUATE AND CALL
THE FIRE DEPARTMENT.
The fire department is being called.
A
3
4
You can fight the fire with your back
to an exit.
*Based on “Kitchen Firesafety Tips” published
by NFPA.
NEVER PICK UP A FLAMING PAN—
You may be burned.
B
C
CAUTION: For general ventilating
use only. Do not use to exhaust hazardous or
explosive materials and vapors.
DO NOT USE WATER, including wet
dishcloths or towels—a violent steam
explosion will result.
Make sure all fingers are away from the
downdraft top when it is lowered.
Use an extinguisher ONLY if:
D
You know you have a Class ABC
1
extinguisher, and you already know
how to operate it.
The fire is small and contained in
the area where it started.
2
SERVICING
If You Need Service…
Disconnect power to the cooktop and remove
it first. Reverse the steps in the Install the
Downdraft section to remove the blower.
Do not attempt to repair or replace any part of
the downdraft system unless it is specifically
recommended in this guide. All other servicing
should be referred to a qualified technician.
Service parts are available from a GE Service
and Parts Center.
Be sure electrical power is off before servicing
the unit.
It may be necessary to remove the downdraft
blower system in order to service components
such as the blower motor or air vent
mechanism.
SAVE THESE INSTRUCTIONS
6
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTRUCTIONS IMPORTANTES DE SÉCURITÉ
PRÉCAUTIONS—AVERTISSEMENT—POUR RÉDUIRE TOUT
RISQUE DE BLESSURE CORPORELLE EN CAS D’INCENDIE
DE GRAS À LA SURFACE DU FOUR, OBSERVEZ LES
MESURES SUIVANTES. *
ÉTOUFFEZ LES FLAMMES à l’aide d’un
couvercle hermétique, d’une tôle à biscuits
ou d’un plateau de métal, puis éteignez
l’élément chauffant. FAITES ATTENTION
DE NE PAS VOUS BRÛLER. Si les flammes
ne s’éteignent pas immédiatement,
SORTEZ DE LA PIÈCE ET APPELEZ
LES POMPIERS.
Vous avez déjà appelé les pompiers.
A
3
4
Vous devez vous ménager une voie
de sortie dans le dos pour combattre
le feu.
*Basé sur «Kitcher Firesafety Tips» publiés par
la NFTA.
ATTENTION :
Cet appareil
NE SOULEVEZ JAMAIS UNE
CASSEROLE EN FLAMMES. Vous
risquez de vous brûler.
B
C
ne doit être utilisé qu’à des fins de ventilation
générale. Ne l’utilisez jamais pour ventiler
des vapeurs ou des matériaux explosifs ou
dangereux.
N’UTILISEZ JAMAIS D’EAU, de serviette
mouillée ou de torchon mouillé – cela
occasionnera une explosion violente de
vapeur.
Assurez-vous de ne pas mettre vos doigts sur le
rabattant de ventilation quand vous l’abaissez.
N’utilisez un extincteur QU’AUX
CONDITIONS SUIVANTES :
D
Vous savez que vous avez un
extincteur de classe ABC, et vous
1
savez l’utiliser.
Le feu est faible et contenu dans
l’endroit où il a commencé.
2
ENTRETIEN ET RÉPARATIONS
Si vous avez besoin d’entretien ou de
réparations…
Il peut être nécessaire d’enlever le système
de soufflerie du rabattant de ventilation pour
atteindre des pièces comme le moteur de
la souffleuse ou le mécanisme d’aération.
N’essayez jamais de réparer ou de remplacer
des pièces du système de rabattant de
ventilation à moins que ce guide ne vous
le recommande spécifiquement. Vous devez
avoir recours à un technicien qualifié pour
tout autre entretien ou réparation.
Débranchez le courant de la surface de cuisson
et enlevez-la d’abord. Inversez les étapes
contenues dans la section «Installation du
rabattant de ventilation» pour enlever la
souffleuse.
Assurez-vous que le courant électrique soit
coupé avant de réparer ou d’entretenir
votre appareil.
Les pièces de remplacement sont disponibles
à un Centre de service et de pièces GE.
CONSERVEZ CES INSTRUCTIONS
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Downdraft System
Downdraft Vent System
Raise/lower pad
Turn the downdraft blower ON by pressing
the raise/lower pad. Place your finger on the
“center” of the pad and hold until you observe
the vent moving, then release. The air vent
will rise.
To use the
downdraft
system
All models have a remote raise/lower pad.
The raise/lower pad location may vary.
Use the selector switch to turn the blower ON,
OFF or to change the blower speed.
The vent may be lowered by again pressing
the raise/lower pad. The blower, if left on, will
automatically go off when the vent is lowered.
NOTE: For most convenient operation, set the
blower to the speed you use most often. The
blower will come on to this speed whenever
the unit is raised.
Use the selector switch to turn the blower on or off
or to change the blower speed.
CAUTION: Be careful when raising or
lowering the downdraft. Be sure pots,
pot handles and other objects are clear of the
downdraft and cannot be struck or tipped by
the downdraft being raised.
When using
the downdraft
system…
ATTENTION : Faites attention quand
vous soulevez ou abaissez le rabattant de
ventilation. Assurez-vous que des casseroles,
des manches de casseroles et d’autres objets ne
gênent pas le rabattant et ne puissent pas être
frappés ou renversés quand vous soulevez le
rabattant.
NOTE: There is a slight trim overhang at each
end of the vent.
• To avoid injury, be sure fingers are clear of
the downdraft cover when it is being lowered.
Be careful when raising or lowering the downdraft.
• Keep hands and fingers away from all
downdraft parts.
Cooking tips
The high air movement of this downdraft
system can increase the cooking times for some or the oil is at frying temperatures before
foods. It may take longer to reach high cooking turning on the downdraft.
surface units or wait until the water is boiling
temperatures if the downdraft is turned to high
The downdraft may not completely capture all
right away. Adjust the fan speed for best
the steam from pans on the front burners.
cooking results.
For best results when heating oil for deep
frying or when boiling water, use the front
Canning
When canning foods in a water-bath canner,
a gentle but steady boil must be maintained
continuously for the required time.
Use of the blower at HI speed when canning
may reduce the temperature enough to stop
boiling. While canning, we recommend using
the downdraft at LO speed and using the front
surface unit.
When canning foods in a pressure canner, the
pressure must be maintained continuously for
the required time.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Cleaning
Downdraft Vent System
Grease filters
The efficiency of your downdraft depends on a
clean filter. Frequency of cleaning depends on the
type of cooking you do. Grease filters should be
cleaned at least once a month. Never operate the
downdraft without the filters in place.
To remove: Pull the filters out by grasping them
and pulling straight up.
To clean: Soak and then agitate in a hot detergent
solution. Light brushing may be used to remove
embedded soil. Rinse, shake and remove moisture
before replacing.
With careful handling, the filter will last for years.
If replacement becomes necessary, order the part
from your dealer.
Do not use a steel-wool pad; it will scratch
the surface.
Painted or
stainless steel
surfaces
To clean the stainless steel surface, use warm
sudsy water, a stainless steel cleaner such as
Kleen King®, or an all-purpose liquid or spray
cleaner. Always scrub in the direction of the
grain. Rinse thoroughly with a sponge or cloth
and clean water. Dry with a soft, clean cloth.
After cleaning, use a stainless steel polish, such
as Stainless Steel Magic®, Revere Copper and
Stainless Steel Cleaner®, or Wenol All Purpose
Metal Polish®. Follow the product instructions
for cleaning the stainless steel surface.
Before You Call For Service…
Downdraft Vent System
PROBLEM
POSSIBLE CAUSE
Save time
and money!
FAN DOES
NOT WORK
• The vent is not fully extended. Press the raise/lower pad.
• The blower control switch may be in the OFF position.
Slide it to the right.
Review the
troubleshooting
tips on this
page first and
you may not
need to call
for service.
VENT DOES
NOT WORK
• The vent is not plugged into an outlet. Plug the vent into a 120V
power outlet.
• The raise/lower pad did not engage the lift motor. Hold down the
pad for a couple of seconds to activate the motor.
• The circuit breaker may have tripped. Check the circuit breaker—
reset if necessary.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumer Services
Downdraft Vent System
With the purchase of your new Monogram appliance, receive the
assurance that if you ever need information or assistance from GE,
we’ll be there. All you have to do is call—toll-free!
Whatever your question about any Monogram major appliance, GE Answer Center®
information service is available to help. Your call—and your question—will be answered
promptly and courteously. And you can call any time. GE Answer Center® service is open
24 hours a day, 7 days a week.
GE Answer
Center®
In the USA:
800.626.2000
OR
Visit our Website at: www.monogram.com
In Canada, call 1.888.880.3030.
A GE consumer service professional will provide expert repair service, scheduled at a time
that’s convenient for you. Many GE Consumer Service company-operated locations offer you
service today or tomorrow, or at your convenience (7:00 a.m. to 7:00 p.m. weekdays, 9:00 a.m.
to 2:00 p.m. Saturdays). Our factory-trained technicians know your appliance inside and
out—so most repairs can be handled in just one visit.
In-Home Repair
Service
In the USA:
800.444.1845
In Canada:
1.888.880.3030
GE offers Braille controls for a variety of GE appliances, and a
brochure to assist in planning a barrier-free kitchen for persons
with limited mobility.
For Customers
With Special
Needs…
Consumers with impaired hearing or speech who have access to
a TDD or a conventional teletypewriter may call 800.TDD.GEAC
(800.833.4322) to request information or service.
In the USA:
800.626.2000
You can have the secure feeling that GE Consumer Service will still be there after your
warranty expires. Purchase a GE contract while your warranty is still in effect and you’ll
receive a substantial discount. With a multiple-year contract, you’re assured of future
service at today’s prices.
Service Contracts
In the USA:
800.626.2224
In Canada:
1.888.880.3030
Individuals qualified to service their own appliances can have parts or accessories sent directly
to their home. The GE parts system provides access to over 47,000 parts…and all GE Genuine
Renewal Parts are fully warranted. VISA, MasterCard and Discover cards are accepted.
Parts and
Accessories
User maintenance instructions contained in this guide cover procedures intended to be
performed by any user. Other servicing generally should be referred to qualified service
personnel. Caution must be exercised, since improper servicing may cause unsafe operation.
In the USA:
800.626.2002
In Canada:
1.888.880.3030
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty for customers in the USA
Downdraft Vent System
YOUR MONOGRAM DOWNDRAFT SYSTEM WARRANTY
Staple sales slip or cancelled check here. Proof of original purchase
date is needed to obtain service under warranty.
FULL ONE-YEAR WARRANTY
All warranty service will be provided by our
Factory Service Centers or by our authorized
Customer Care® servicers during normal
working hours.
WHAT IS
COVERED
From the Date
of the Original
Purchase
For one year from date of original purchase,
we will provide, free of charge, parts and
service labor in your home to repair or
replace any part of the downdraft system
that fails because of a manufacturing defect.
Should your appliance need service,
during warranty period or beyond, call
800.444.1845.
This warranty is extended to the original
purchaser and any succeeding owner for
products purchased for ordinary home use
in the 48 mainland states, Hawaii and
Washington, D.C. In Alaska the warranty is
the same except that it is LIMITED because
you must pay to ship the product to the
service shop or for the service technician’s
travel costs to your home.
• Service trips to your home to teach you
how to use the product.
• Replacement of the replaceable filters.
WHAT IS NOT
COVERED
• Damage to the product caused by accident,
fire, floods or acts of God.
• Replacement of house fuses or resetting of
circuit breakers.
• Incidental or consequential damage caused
by possible defects with this appliance.
• Failure of the product if it is used for
other than its intended purpose or used
commercially.
• Damage caused after delivery.
• Improper installation, delivery or
maintenance.
Some states do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitation or exclusion may not apply to you. This warranty gives you specific
legal rights, and you may also have other rights which vary from state to state.
To know what your legal rights are in your state, consult your local or state consumer affairs
office or your state’s Attorney General.
Warrantor: General Electric Company, Louisville, KY 40225
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty for customers in Canada
Downdraft Vent System
YOUR MONOGRAM DOWNDRAFT SYSTEM WARRANTY
Staple sales slip or cancelled check here. Proof of original purchase
date is needed to obtain service under warranty.
FULL ONE-YEAR WARRANTY
WHAT IS
COVERED
From the Date
of the Original
Purchase
For one year from date of original purchase,
we will provide, free of charge, parts and
service labor in your home to repair or
replace any part of the downdraft system
that fails because of a manufacturing defect.
This warranty is extended to the original
purchaser and any succeeding owner for
products purchased for ordinary home use
in Canada.
All warranty service will be provided by our
Factory Service Centers or by our authorized
Customer Care® servicers during normal
working hours.
Should your appliance need service,
during warranty period or beyond, call
1.888.880.3030.
• Service trips to your home to teach you
how to use the product.
• Replacement of the replaceable filters.
WHAT IS NOT
COVERED
• Damage to the product caused by accident,
fire, floods or acts of God.
• Replacement of house fuses or resetting of
circuit breakers.
• Incidental or consequential damage caused
by possible defects with this appliance.
• Failure of the product if it is used for
other than its intended purpose or used
commercially.
• Damage caused after delivery.
• Improper installation, delivery or
maintenance.
Some provinces do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you. This warranty gives
you specific legal rights, and you may also have other rights which vary from province to
province. To know what your legal rights are in your province, consult your local or
provincial consumer affairs office.
Warrantor: Camco Inc. If further help is needed concerning this warranty, write: Manager,
Consumer Relations, Camco Inc., 1 Factory Lane, Suite 310, Moncton, N.B. E1C 9M3.
959-0332-003
164D4290P340
49-80184
02-03 JR
ZVB30
ZVB36
Printed in the United States
Download from Www.Somanuals.com. All Manuals Search And Download.
|