Installation Instructions
JXCHBB, JXCHWW,
JXCHCC, JXCHSS
Decorative Duct Cover
JXCHBB, Black
JXCHWW, White
JXCHCC, Bisque
JXCHSS, Stainless Steel
Ceiling Bracket
4 Torx Head
Screws
KIT CONTENTS
2 Washers
2-Piece
2 Phillips Head
Duct Cover With
Ceiling Bracket
Decorative Screws
2 Wall
2 Wood
Fasteners
Screws
Review the following examples to ensure a trouble free
installation using the duct cover accessory.
DUCT COVER REQUIREMENTS
These decorative duct covers are designed to conceal
8 ft. Ceiling
the ductwork running from the top of the hood to the
ceiling. The duct cover can be used to fill a 12" space by
using the outer piece alone, or using both pieces it will
expand from 24" to 34" heights. Read this page to be
sure the duct cover accessory fits your installation
situation.
8 ft. Ceilings: The hood must
be installed at 30″ above the
cooking surface (or 66″ above
12"
the floor). The duct cover will
not fit if the hood is installed at
a lower or higher height. Use
the outside 12″ section, discard
the inside section.
Duct Cover Accessory:
• Use the decorative duct
cover to conceal ductwork
running from the top of
the hood to the ceiling.
30"
9 ft. Ceiling
12"
• The duct cover accessory
consists of 2 pieces. The
24"
30"
outside piece is 12″ high,
the inside piece is 22″.
Nested together they are
24″ min., expanding to
a total maximum height
of 34″.
22"
12"
30"
24"
• The outside piece can be
used alone to fill a 12″
height.
• For heights over 12″, the
ceiling bracket must be
12"
9 ft. Ceilings: Install the hood 24″ min. and up to a maximum of 30″
above the cooking surface. The duct cover will expand to reach
ceiling height.
11"
10 ft. Ceiling
installed to secure the cover at the top.
30"
34"
To avoid unsightly gaps, plan the hood installation height
for duct cover use.
• The cover will fit a 12″ min. height from the top of the
hood to the ceiling,
– or 24″ min. and expanding up to 34″ from the top of
the hood to the ceiling.
36" Max.
32"
THE DUCT COVER CANNOT BE USED WHEN THE
DISTANCE ABOVE THE TOP OF THE HOOD IS
BETWEEN 12″ AND 24″.
10 ft. Ceilings: Install the hood 32″ min. to 36″ max. above the cooking
surface. The duct cover will expand to a maximum of 34″ above the
top of the hood to meet the ceiling.
Download from Www.Somanuals.com. All Manuals Search And Download.
|