FOLD
LIMITED WARRANTY
FOLD
FOLD
INSTALLATION
What your warranty covers:
Any defect in materials or workmanship.
For how long after your purchase:
2-9180
•
WALL MOUNT INSTALLATION
MODULAR JACK REQUIREMENTS
•
One year. (The warranty period for rental units begins with the first
rental or 45 days from date of shipment to the rental firm, whichever
comes first.)
1a. If the modular phone jack is in
the base plate on the wall
where you're going to mount
your phone, plug the
You need an RJ11 type modular jack,
which is the most common type of phone
jack and might look like the one pictured
here. If you don’t have a modular jack,
call your local phone company to find out
how to get one installed.
1a
What we will do:
Big Button Telephone
User's Guide
•
•
Provide you with a new or, at our option, a refurbished unit.
The exchange unit is under warranty for the remainder of the original
telephone line cord into the
jack; run the telephone line
cord through the guides on
the bottom of the phone;
wrap the excess line cord
around the cord wrap on the
product’s warranty period.
How to make a warranty claim:
•
Properly pack your unit. Include any cables, etc., which were
originally provided with the product. We recommend using the original
carton and packing materials.
Include in the package evidence of purchase date such as the bill of
sale. Also print your name and address and a description of the defect.
Send standard UPS or its equivalent to:
3
•
DESKTOP OR TABLETOP INSTALLATION
2
2
bottom of the phone; mount
the phone on the posts; and
set the RINGER switch and
PULSE/TONE switch
Thomson Consumer Electronics, Inc.
11721 B Alameda Ave.
1
Socorro, Texas 79927
Pay any charges billed to you by the Exchange Center for service not
covered by the warranty.
Insure your shipment in case of loss or damage. Thomson accepts no
liability in case of damage or loss.
A new or refurbished unit will be shipped to you prepaid freight.
What your warranty does not cover:
•
•
•
Mounting
holes
(described in detail below).
1b. If the modular phone jack is
near the floor and you want
to mount the phone on the
wall, plug the telephone line
cord into the modular jack.
2. Run the telephone line cord
through the guides on the
bottom of the phone.
4
•
Customer instruction. (Your Owner’s Manual provides information
regarding operating instructions and user controls. For additional
information, ask your dealer.)
4
5
3
•
•
•
•
Installation and set-up service adjustments.
Batteries.
Damage from misuse or neglect.
Products which have been modified or incorporated into other
products.
•
•
Products purchased or serviced outside the USA.
Acts of God, such as but not limited to lightning damage.
3. Wrap the excess line cord
around the cord wrap on the
bottom of the phone.
Telephone
line cord
Product Registration:
•
Please complete and mail the Product Registration Card packed with
your unit. It will make it easier to contact you should it ever be
necessary. The return of the card is not required for warranty
coverage.
6
Coiled
handset
cord
4. Slip the mounting holes on
the bottom of the telephone
over the wall plate posts and
slide the base down until the
phone is firmly in place. (Wall
plate is not included.)
5. Set the VOLUME switch (on
the side of the handset) to the
desired listening volume.
1. Run the telephone line cord through the guides on
the bottom of the phone.
How state law relates to this warranty:
•
This warranty gives you specific legal rights, and you may have other
2. Wrap the excess line cord around the cord wrap on
the bottom of the phone.
5
rights which vary from state to state.
If you purchased your product outside the USA:
•
This warranty does not apply. Contact your dealer for warranty
information.
3. Connect the telephone line cord to a modular
telephone jack.
4. Set the VOLUME switch (on the side of the handset)
to the desired listening volume.
6
6. Set PULSE/TONE switch (on
the side of the handset) to
TONE for touch-tone service,
or set it to PULSE for rotary
service. If you don’t know
5. Set PULSE/TONE switch (on the side of the handset)
to TONE for touch-tone service, or set it to PULSE for
rotary service. If you don’t know which type of
service you have, check with the phone company.
7
6. Slide the RINGER switch (on the side of the base) to
LO or HI.
which type of service you have,
check with the phone company.
We bring good things to life.
7. Slide the RINGER switch (on
the side of base) to LO or HI.
FOLD
FOLD
INTERFERENCE INFORMATION
USING THE TELEPHONE FEATURES
FCC REGISTRATION INFORMATION
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference; and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Your GE telephone equipment is registered with the Federal Communica-
tions Commission and is in compliance with parts 15 and 68, FCC Rules
and Regulations.
AUTOMATIC REDIAL
To automatically redial the last number you called:
1
Notification to the Local Telephone Company
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
On the bottom of this equipment is a label indicating, among other
information, the FCC Registration number and Ringer Equivalence
Number (REN) for the equipment. You must, upon request, provide
this information to your telephone company.
1. Pick up the handset to get a dial tone.
2. Press REDIAL.
The REN is useful in determining the number of devices you may
connect to your telephone line and still have all of these devices ring
when your telephone number is called. In most (but not all) areas, the
sum of the RENs of all devices connected to one line should not
exceed 5. To be certain of the number of devices you may connect to your
line as determined by the REN, you should contact your local telephone
company.
FLASH
EASY DIALBIGBUTTON
ABC
DEF
Press the FLASH button instead of the hook switch to activate custom calling services
such as call waiting or call transfer. Custom calling services are provided by the phone
company.
1 2 3
MNO
GHI
JKL
4 5 6
WXYZ
Notes
PQRS
TUV
TEMPORARY TONE
• This equipment may not be used on coin service provided by the
7 8 9
•
•
•
Reorient or relocate the receiving antenna (that is, the antenna for
radio or television that is “receiving” the interference).
Reorient or relocate and increase the separation between the
telecommunications equipment and receiving antenna.
Connect the telecommunications equipment into an outlet on a
circuit different from that to which the receiving antenna is
connected.
If you have pulse service, you can temporarily change from pulse to tone service in order
to access services that require tone dialing (such as getting information from a local bank).
After dialing the telephone number, press and release the tone button, marked with an
asterisk (*). When you hang up, your phone returns to pulse service.
telephone company.
TONE
OPER
• Party lines are subject to state tariffs, and therefore, you may not
be able to use your own telephone equipment if you are on a party
line. Check with your local telephone company.
0 #
*
FLASH
REDIAL
• Notice must be given to the telephone company upon permanent
disconnection of your telephone from your line.
Rights of the Telephone Company
REDIAL
button
2
•
Consult the dealer or an experienced radio/TV technician for help.
Should your equipment cause trouble on your line which may harm
the telephone network, the telephone company shall, where
practicable, notify you that temporary discontinuance of service may
be required. Where prior notice is not practicable and the
circumstances warrant such action, the telephone company may
temporarily discontinue service immediately. In case of such
temporary discontinuance, the telephone company must: (1) promptly
notify you of such temporary discontinuance; (2) afford you the
opportunity to correct the situation; and (3) inform you of your right to
bring a complaint to the Commission pursuant to procedures set forth
in Subpart E of Part 68, FCC Rules and Regulations.
The telephone company may make changes in its communications
facilities, equipment, operations of procedures where such action is
required in the operation of its business and not inconsistent with
FCC Rules and Regulations. If these changes are expected to affect
the use or performance of your telephone equipment, the telephone
company must give you adequate notice, in writing, to allow you to
maintain uninterrupted service.
If these measures do not eliminate the interference, please consult your
dealer or an experienced radio/television technician for additional
suggestions. Also, the Federal Communications Commission has
prepared a helpful booklet, “How To Identify and Resolve Radio/TV
Interference Problems.” This booklet is available from the U.S.
Government Printing Office, Washington, D.C. 20402. Please specify
stock number 004-000-00345-4 when ordering copies.
FLASH
button
TROUBLESHOOTING TIPS
Problem
Solution
No dial tone.
Won't dial out
•
•
Check hook switch to make sure it pops up.
Make sure PULSE/TONE is set to correct position.
HEARING AID COMPATIBILITY
This telephone system meets FCC standards for Hearing Aid
Compatibility.
Phone doesn’t ring
•
•
Make sure RINGER switch is set to LO or HI.
You might have too many phones on one line.
FCC NUMBER IS LOCATED ON THE CABINET BOTTOM
REN NUMBER IS LOCATED ON THE CABINET BOTTOM
Feedback when
•
This is normal. Power fluctuates with phone outpulsing.
dialing in PULSE mode.
Can’t be heard by
other party
•
•
Make sure phone cord is securely plugged in.
Make sure other phones aren't off the hook at the same time you're using the phone. It is
normal for the volume to drop when additional phones are used at the same time.
2-9180
© 1998 Thomson Consumer Electronics, Inc.
P.O. BOX 1976, Indianapolis, IN 46206
Trademark(s) ® Registered
15401270 (Rev. 1 E/S)
98-52
Printed in China
Marca(s) ® Registrada(s)
2-9180 (Folded size 80 x 158 mm)
15401270 (Rev. 1 E/S)
•
Sht 1 of 2 (4 Folds)
Download from Www.Somanuals.com. All Manuals Search And Download.
|