GE Fanuc Automation
Programmable Control Products
CIMPLICITY® Display Station
Touch Display:
IC752CTD400/450
GFK-1425B
March 1998
Download from Www.Somanuals.com. All Manuals Search And Download.
Preface
Content of This Manual
This manual describes the features and operation of the following CIMPLICITY Display Station
Touch Display products:
Catalog Number
IC752CTD400
IC752CTD450
Related Publications
GFK-1189
CIMPLICITY® HMI for Windows NT™ and Windows® 95 Important
Product Information
GFK-1180
GFK-1181
CIMPLICITY® HMI for Windows NT™/CIMPLICITY HMI for
Windows® 95/CIMPLICITY Server for Windows NT™ Base System User
Manual
CIMPLICITY® HMI for Windows NT™/CIMPLICITY HMI for
Windows® 95/CIMPLICITY Server for Windows NT™ Device
Communications Manual
GFK-1396
GFK-1491
CIMPLICITY® HMI for Windows NT and Windows 95 CimEdit
Operation Manual
Important Product Information
At GE Fanuc Automation, we strive to produce quality technical documentation. After you have
used this manual, please take a few moments to complete and return the Reader's Comment Card
located on the next page.
GFK-1425B
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Product Features..................................................................................................... 2
Display and Touch Screen................................................................................................... 3
Floppy Disk Drive Unit ....................................................................................................... 3
Hardware Installation............................................................................................ 4
Mounting Guidelines ........................................................................................................... 4
Mounting Procedure ............................................................................................................ 6
Installing ISA-Compatible Cards......................................................................................... 7
I/O Address and IRQ Allocation................................................................................... 8
Reserved I/O Address....................................................................................................8
Touch Screen Port Address...........................................................................................8
Installing the Floppy Disk Drive........................................................................................ 10
Changing the Air Filter...................................................................................................... 11
To change the air filter element: ................................................................................. 11
Connection ............................................................................................................ 12
AC Power Input ................................................................................................................. 13
Keyboard............................................................................................................................ 13
Serial Communication Cables............................................................................................. 14
Printer Port LPT1 (Parallel Port) ........................................................................................ 15
Floppy Disk Drive Interface................................................................................................ 15
Initial Startup ....................................................................................................... 16
Powering Up the Touch Display Unit................................................................................ 16
Setting Up Windows 95 Systems (IC752CTD400)........................................................... 16
Installing Network Driver on Microsoft Windows 95 Systems (IC752CTD400)............. 17
Configuring the Touch Display to Run on a Microsoft Network...................................... 18
Setting up Windows NT Systems (IC752CTD450)........................................................... 19
Installing Network Driver on Microsoft Windows NT Systems (IC752CTD450)............ 20
Login Recommendation..................................................................................................... 21
Registering Your CIMPLICITY Software......................................................................... 21
Installing Application Software......................................................................................... 22
External CD-ROM Drive ............................................................................................ 22
Touch Screen Driver for Windows ............................................................................. 22
Shutting Down the Computer ............................................................................. 23
System Operation ................................................................................................. 23
External Mouse.................................................................................................................. 23
CIMPLICITY Software ..................................................................................................... 23
Communications ................................................................................................................ 23
BIOS Settings........................................................................................................ 24
Interrupt Requests and I/O Assignments........................................................... 25
Diagnostics and Troubleshooting........................................................................ 26
Self-Test Diagnostics......................................................................................................... 26
System Test and Initialization..................................................................................... 26
GFK-1425B
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
System Configuration Verification ............................................................................. 26
Troubleshooting................................................................................................................. 27
Powerup....................................................................................................................... 27
Display......................................................................................................................... 28
Memory ....................................................................................................................... 28
Touch Screen............................................................................................................... 29
External PS/2 Mouse................................................................................................... 29
Keyboard ..................................................................................................................... 29
Communications.......................................................................................................... 30
PLC/CPU Connection .................................................................................................30
MODBUS RTU Communications...............................................................................31
Network Communications...........................................................................................31
Printing........................................................................................................................ 32
Corrective Actions............................................................................................................. 33
Auto Logon Error Message......................................................................................... 33
Calibrating the Touch Screen...................................................................................... 33
CMOS Checksum Error .............................................................................................. 34
Frequently Asked Questions.............................................................................................. 35
Hardware FAQs........................................................................................................... 35
Software FAQs............................................................................................................ 36
Specifications ........................................................................................................ 37
vi
CIMPLICITY® Display Station Touch Display: IC752CTD400/450–March 1998
GFK-1425B
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Figure 1. Touch Display Unit Dimensions...................................................................................................... 5
Figure 2. Panel Cutout Dimensions................................................................................................................. 6
Figure 3. Mounting the Touch Display Unit ................................................................................................... 6
Figure 4. Card Clamp ...................................................................................................................................... 7
Figure 5. Jumper Locations ............................................................................................................................. 9
Figure 6. Floppy Disk Drive Mounting......................................................................................................... 10
Figure 7. Filter Element Location ................................................................................................................. 11
Figure 8. Touch Display Connectors............................................................................................................. 12
GFK-1425B
Contents
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Table 1. Touch Display Features..................................................................................................................... 2
Table 2. Touch Screen (Custom COM) I/O address ....................................................................................... 9
Table 3. Touch Screen (Custom COM) IRQ................................................................................................... 9
Table 4. Connector Listing............................................................................................................................ 12
Table 5. IRQ Table......................................................................................................................................... 25
Table 6. I/O Port Range Table....................................................................................................................... 25
viii
CIMPLICITY® Display Station Touch Display: IC752CTD400/450–March 1998
GFK-1425B
Download from Www.Somanuals.com. All Manuals Search And Download.
CIMPLICITY® DISPLAY STATION
GFK-1425B
March 1998
Touch Display Products
IC752CTD400, IC752CTD450
Welcome to GE Fanuc’s CIMPLICITY Display Station products. These products provide an
integrated hardware and software platform for running CIMPLICITY HMI applications. The Touch
Display incorporates CIMPLICITY HMI software for Windows and either Microsoft Windows®
95 or Microsoft Windows NT® software (depending on model). The 10.4” active matrix, thin film
transistor (TFT) color displays provide a large viewing area with crisp color and contrast.
The Touch Display incorporates CIMPLICITY HMI software for Windows, and either Microsoft
Windows® 95 or Microsoft Windows NT® software (depending on model). All Display Stations
come preloaded with the full point count version of CIMPLICITY HMI software.
The Touch Display members of the Display Station family feature a fully self contained Pentium
computer with a built-in 640 x 480 pixel flat screen display and touch-screen surround, housed in an
industrial enclosure, and weighing less than 11kg (25 lbs). The 3.5 inch disk drive adds 1kg (2.2lbs)
to the weight.
The complete unit is housed within a compact, rugged metal enclosure. The unit is supplied
completely assembled and requires only mounting and connecting. Only one panel cut-out is
required to mount the unit. The use of special clips that secure the unit to the panel eliminates the
need for mounting holes.
GFK-1425B
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Features
When you purchase a CIMPLICITY Touch Display system, you receive:
•
CIMPLICITY Display Station industrial computer with CIMPLICITY HMI and operating
system software installed.
•
•
•
•
Power cord
Floppy disk drive (3.5-inch)
Installation hardware
CIMPLICITY Display Station Data Sheet which describes specifics of the hardware and
software for your particular system
•
•
•
•
•
CIMPLICITY Display Station system documentation
CIMPLICITY software licenses and license agreements
Ethernet driver floppy disk and manual
Touch screen driver floppy disk and manual
Microsoft Windows documentation, software distribution, Certificate of Authenticity and
license agreement
•
•
•
CIMPLICITY software
Ethernet driver floppy disk and manual
Touch screen driver floppy disk
Touch Display features are summarized in Table 1.
Table 1. Touch Display Features
Operating system
IC752CTD400
IC752CTD450
Windows 95
Windows NT
Development and Runtime software
CIMPLICITY HMI
software
Pentium, 133 MHz
1.2 GB
CPU
Hard disk
Floppy disk drive
RAM
3.5 inch, 1.44 Mbyte
32 MB
Color TFT (thin film transistor) active
matrix LCD with touch screen surround
Display
one
Parallel ports
Serial ports
Two RS-232
2
CIMPLICITY® Display Station Touch Display: IC752CTD400/450–March 1998
GFK-1425B
Download from Www.Somanuals.com. All Manuals Search And Download.
Display and Touch Screen
The Touch Display features a color liquid crystal display (LCD) with a touch screen surround. The
touch-screen surround, which is an integral part of the front panel on all Touch Display Flat Screen
models, makes operation of a configured system more intuitive by allowing the operator to interface
with the system by simply touching the screen.
The performance of the Touch Display unit is not affected by bright sunlight. The system can also
differentiate between a true touch operation and a beam failure, allowing the system to continue
operation under adverse conditions.
Floppy Disk Drive Unit
A floppy disk drive (IC752FPY000), interface cable and connector are included with the Touch
Display unit. The disk drive unit is housed in a metal case that can be attached to the rear panel of
the Touch Display enclosure.
Note
Using the disk drive that is provided with the Touch Display unit will ensure
compatibility. The use of other types of drives and controllers, which may not be
compatible with the Touch Display, is not recommended.
GFK-1425B
Touch Display Products: IC752CTD400/450
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Installation
This section describes procedures for mounting the Touch Display unit, and installing ISA-
compatible cards and the floppy disk drive unit.
A single cut-out is required in the mounting panel. No extra holes are required. Instead, ten spring-
loaded retaining clips are supplied to secure the unit from behind the panel.
Note
The Touch Display unit with processor card weighs 11kg (25lbs) approx. The
3.5-inch disk drive adds 1kg (2.2lbs) to the weight when installed.
Mounting Guidelines
When selecting a location for the Touch Display unit, make sure that there will be enough space for
access to the connectors, located on the right side of the unit. For unit dimensions, refer to Figure 1.
The mounting location for the Touch Display unit should meet the following requirements:
•
The panel into which the unit is mounted should provide protection from dust, dirt and water in
an industrial environment.
•
The panel should be capable of supporting the weight of the Touch Display unit without
distortion.
•
•
Maximum panel thickness is 10mm (0.39 inch).
Allowance should be made for air flow. A fan draws in air through a filter mounted on the side
of the unit. Warm air is expelled through slots in the opposite side panel (refer to Figure 1).
Note
All ten mounting clips must be installed to achieve a good seal between the
Touch Display unit and the mounting panel.
4
CIMPLICITY® Display Station Touch Display: IC752CTD400/450–March 1998
GFK-1425B
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 1. Touch Display Unit Dimensions
GFK-1425B
Touch Display Products: IC752CTD400/450
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Mounting Procedure
1. Cut out the panel to the dimensions shown. The cut-out dimensions of 367 x 255mm
(14.45 x 10.04 inches) allow a 1.5mm (0.06 inch) clearance on each edge of the Touch Display
unit.
Figure 2. Panel Cutout Dimensions
2. Position the Touch Display unit in the cut-out and fit the ten spring-loaded retaining clips into
the slots. All ten clips must be installed to achieve a good seal.
Figure 3. Mounting the Touch Display Unit
3. Screw in the tightening screw on each clip so that the nut compresses the spring. To ensure a
good seal between the Touch Display unit and the panel, tighten the clips evenly (tighten each
of the ten clips in turn, a little at a time).
4. Stop tightening the clips when the springs are fully compressed — at this point the Touch
Display unit is locked in place.
6
CIMPLICITY® Display Station Touch Display: IC752CTD400/450–March 1998
GFK-1425B
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing ISA-Compatible Cards
The Touch Display rear panel must be removed in order to gain access to the ISA bus cards. There
are six screws securing the rear panel. When these are removed, the rear panel can be lifted away
from the main unit.
Warning
Switch off the unit and disconnect the main power input before removing the
rear panel.
Blanking Plates
Blanking plates are installed on each unused card position. Remove blanking plates as necessary to
install new cards. Empty slots must always have a blanking plate installed, otherwise the air flow
through the unit will be affected.
Card Clamp
A card clamp bracket, which can accommodate the two standard heights of ISA bus cards, is fixed
inside the rear panel. The card clamp bracket has nylon card-securing blocks fitted above each
vacant card position. When installing a full height card in one of these positions, remove the long
block from the appropriate position on the bracket and replace with a short block.
Full height cards — 114mm (4.5 inches) approx. — are secured by short nylon blocks
Low height cards — 100mm (3.9 inches) approx. — are secured by long nylon blocks
Figure 4. Card Clamp
GFK-1425B
Touch Display Products: IC752CTD400/450
7
Download from Www.Somanuals.com. All Manuals Search And Download.
I/O Address and IRQ Allocation
Caution
For most applications an IRQ cannot be shared by more than one resource.
If more than one resource is set to the same interrupt, the application may
not respond properly and could cause your machine to lock up.
The I/O address and IRQ number of cards being installed must not conflict with those of cards
already installed. Refer to "Interrupt and I/O Assignments" on page 25 for a list of factory-set IRQs.
We strongly recommend that you use only the interrupts that are marked available and use them as
suggested.
Reserved I/O Address
The Touch Display backplane has an 8-bit I/O mapped register intended for future use. This register
is at either 300 hexadecimal or 360 hexadecimal, and is configured by a jumper (link) which is
labeled LK12 or LK15. Its position is the same in either case, and is shown in Figure 5.
LK12 (LK15)
LK12 (LK15)
IN
OUT
300 hexadecimal (factory default)
360 hexadecimal
Any hardware adapters installed should not conflict with the above configured address.
Touch Screen Port Address
The Touch Display touch-screen is internally connected as a custom COM port. The I/O addressing
and IRQ setting for the port are configured by jumpers and are factory set to I/O address 310
hexadecimal, IRQ5. Changes should not be made to this port unless a hardware adapter that
interferes with the factory-set addressing for COM4 is being installed. (Refer to Tables 6 and 7 on
page 25.)
Note
Windows based software has been installed to work with the touch-screen via the
touch screen driver software (T5driver for Windows 95, TNdriver for
Windows NT). Check that the COM port parameters given to the driver match the
hardware link settings for the CUSTOM COM port.
The locations of the jumpers LK2 to LK14 (LK15) are shown in Figure 5.
8
CIMPLICITY® Display Station Touch Display: IC752CTD400/450–March 1998
GFK-1425B
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 5. Jumper Locations
Table 2. Touch Screen (Custom COM) I/O address
LK2
OUT
LK3
OUT
Address
Disabled
IN
OUT
IN
2E8 hexadecimal
OUT
IN
310 hexadecimal (factory default)
3E8
IN
Table 3. Touch Screen (Custom COM) IRQ
One jumper determines the IRQ number, depending on its position:
LK6
LK7
LK8
LK9
LK10
LK11
IRQ3
IRQ4
IRQ5 (factory default)
IRQ6
IRQ7
IRQ9
GFK-1425B
Touch Display Products: IC752CTD400/450
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Floppy Disk Drive
The floppy disk drive is designed for mounting on the rear panel of the Touch Display unit. Two
locating slots in the rear panel accept the two metal brackets on the disk drive housing. A
thumbscrew fastens the drive assembly to the rear panel. A ribbon cable, terminated with a D-type
connector, extends from the disk drive to the floppy disk connector at the side of the unit.
Figure 6. Floppy Disk Drive Mounting
Caution
The Touch Display unit must be powered off before the disk drive connector
is connected or disconnected. Failure to observe this precaution will result in
damage to the equipment.
Install the 3.5 inch disk drive as follows:
1. Power down the Touch Display unit.
2. Fit the disk drive brackets into the two locating slots on the Touch Display rear panel (refer to
Figure 6).
3. For temporary attachment, tighten the fastening screw finger tight. For permanent attachment,
use a screwdriver to tighten the screw.
4. Connect the 37-pin D-type connector to the FLOPPY DISK connector and tighten the two
securing screws.
5. Power up the Touch Display unit and check that there are no boot up error messages relating to
the floppy disk drive.
6. To test the drive, insert a formatted disk and select 3 ½ Floppy (A): in Windows Explorer or
File Manager.
10
CIMPLICITY® Display Station Touch Display: IC752CTD400/450–March 1998
GFK-1425B
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Air Filter
The filter element should be changed every three months, or sooner in dusty environments. If the air
filter is not changed at suitable intervals, or a non-approved filter element is installed, the unit may
overheat.
Filter Type: 6.35mm (0.25 inch) thick polyester/polyurethane open cell foam (45 ppi)
To change the air filter element:
The filter element is held directly behind the filter plate in the side of the Touch Display unit.
Figure 7. Filter Element Location
Caution
Power down the Touch Display unit before removing the air filter plate.
1. Unscrew the screw in the center of the filter plate sufficiently to allow the plate to be removed.
The screw is captive in the plate.
2. When the filter plate has been removed, the filter element can be changed. Replace the filter
plate after changing the filter element.
GFK-1425B
Touch Display Products: IC752CTD400/450
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection
All connections are made on the side panel of the Touch Display unit. The connector layout is
shown in Figure 8.
Figure 8. Touch Display Connectors
Table 4. Connector Listing
Card Slot
(from top)
Type
3-prong AC power receptacle
25-pin, female, D-type
37-pin, female, D-type
15-pin, female high density D-type
6-pin, mini DIN
Function
Power input
none
1
Parallel communications
Floppy disk drive connection
VGA CRT output
2
3
4A
4B
4C
4D
5
Keyboard connection
Serial communications
Mouse connection
9-pin, male, D-type
6-pin mini DIN
9-pin, male, D-type
Coaxial
Serial communications
Ethernet communications
Ethernet communications
5
RJ45 (10BaseT)
12
CIMPLICITY® Display Station Touch Display: IC752CTD400/450–March 1998
GFK-1425B
Download from Www.Somanuals.com. All Manuals Search And Download.
AC Power Input
The power input connector is a standard CEE22 type. A power cable is supplied with the Touch
Display unit.
The power supply is auto-ranging, therefore no configuration is needed to change the unit between
110 volt AC and 240 volt AC operation. Check that the fuse is of the correct rating for the supply
voltage.
The panel mounted power input connector houses a 5 x 20mm fuse in a compartment adjacent to
the input socket. The fuse-holder can be accessed only when the power lead is withdrawn.
Fuse value
2 amps for 240 volt working
4 amps for 110 volt working.
Keyboard
No keyboard is supplied with the Touch Display product. A PC AT keyboard is required to
configure the application software. After configuration, the Touch Display can be operated without
a keyboard by using the built-in touch screen.
The keyboard connector is a standard 6-pin DIN type, female connector.
6
5
4
3
2
1
GFK-1425B
Touch Display Products: IC752CTD400/450
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial Communication Cables
COM1 and COM2 Pin Assignments
1
2
3
4
5
6
7
8
9
DCD
Rx
a45558
Tx
DTR
Gnd
DSR
RTS
CTS
RI
5
1
9
6
Serial communication cables for COM1 and COM2 should be correctly terminated.
•
Typically COM1 is used for communications to the PLC and COM2 is used for Host
Communications to another device or for a serial mouse.
•
To ensure that the installation meets the EMC radiation specification, the serial cables must
comply with the following requirements:
The cables must be of the shielded type.
The D-type connector covers must provide EMC shielding (e.g. metallized plastic or
die cast metal covers).
The cables must be terminated with 360 degree termination of the shield, as illustrated
below.
14
CIMPLICITY® Display Station Touch Display: IC752CTD400/450–March 1998
GFK-1425B
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer Port LPT1 (Parallel Port)
LPT1 Pin Assignments
1
2
3
4
5
6
7
8
9
Strobe
10
11
12
13
14
15
16
17
Acknowledge
Busy
Paper End
Select Out
Auto Feed XT
Error
Initialize Printer
Select In (From Printer)
Ground
Data Bit 0
Data Bit 1
Data Bit 2
Data Bit 3
Data Bit 4
Data Bit 5
Data Bit 6
Data Bit 7
18 to 25
Floppy Disk Drive Interface
The 3.5 inch floppy disk drive interface is factory set to Drive A. Connection is via a 37-pin female
D-type connector mounted on the side of the Touch Display unit.
Disk Drive Interface Pin Assignments
1 to 18
19
Ground
28
29
30
DIR
Direction
+5 VDC.
RWC/RPM
STEP
WD
Step Pulse
20
RPM Low
Write Data (to
floppy)
21
22
23
24
No connection
No connection
IDX
31
32
33
34
WE
Write Enable
Track 0
TR0
Index
WRPRT
RDD
Write Protected
MO1
Motor Enable 1
Read Data (from
floppy disk)
25
26
27
DS0
DS1
MO0
Drive Select 0
Drive Select 1
Motor Enable 0
35
36
37
HS
Head Select
Disk Change
+5 V
DCHNG
Vcc
GFK-1425B
Touch Display Products: IC752CTD400/450
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Startup
When you first power up your system, you will need to attach a standard PS/2-type keyboard to the
external keyboard port on the Display Station. When the system starts up, you will be required to
enter the Product ID from the Windows 95 Certificate of Authenticity and other data to set up your
system.
Also, most configuration activities that you perform on a Touch Display system can be more easily
completed using a keyboard or may require a keyboard.
Powering Up the Touch Display Unit
Caution
Do not connect or disconnect external devices, such as a printer or an
external floppy drive, while the unit is powered. Failure to observe this
precaution could result in damage to the equipment.
The power switch is located on the side of the Touch Display unit next to the input power
connector. To power up to unit, set the rocker switch to the | position.
During power up, the processor will run its normal diagnostic checks and indicate the presence of
any errors either with a screen prompt or with warning beeps.
Setting Up Windows 95 Systems (IC752CTD400)
Before you get started you need a PS/2 Keyboard.
1. Plug in the floppy disk assembly, keyboard, and power cord.
2. Power on the unit. The Windows 95 Setup screen will appear.
3. Select your Regional Settings. Touch the Next button.
4. Select your Keyboard Layout. Touch the Next button.
5. Type your name.
6. Press the TAB key and type your company name
7. Press ENTER.
8. Read the license agreement
9. Touch your choice.
10. Touch Next.
11. Enter the Windows 95 Certificate of Authenticity number found on the front of your Windows
95 manual. Press ENTER.
16
CIMPLICITY® Display Station Touch Display: IC752CTD400/450–March 1998
GFK-1425B
Download from Www.Somanuals.com. All Manuals Search And Download.
12. Touch the Finish button. (Although the network card supports Plug & Play mode, this feature
has been disabled due to hardware conflict of non-Plug & Play devices. Please refer to
“Installing Network Driver on Microsoft Windows 95 Systems”.)
13. Windows 95 will go through setup.
14. When prompted for Date/Time Properties, use your left and right arrow key to switch the time
zone to your time zone. Press ENTER.
15. If you have a printer connected, click Next and select your printer model type. If not, touch the
Cancel button. The Welcome to Windows 95 window will appear.
16. Click Close for the Welcome to Windows 95 window.
Installing Network Driver on Microsoft Windows 95 Systems
(IC752CTD400)
Although the network card supports Plug & Play mode, this feature has been disabled due to
hardware conflict of non-Plug & Play devices. It is recommended that the network card use the
NE2000 compatible driver instead of the Plug & Play driver provided on the Ethernet Card
diskette. To set up your network please follow the steps below.
1. Click the Start icon, click Settings, and Control Panel.
2. In the Control Panel window, double click the Network icon. The Network dialog box will
appear.
3. In the Network dialog box, click the Add button. The Select Network Component Type dialog
box will appear.
4. Click the Adapter icon. The Select Network Adapters dialog box will appear.
5. In the list of Manufacturers, select Novell/Anthem. Press the TAB key to go to the Network
Adapters list. Choose NE2000 Compatible. Click the OK button or press ENTER.
6. In the Network Configuration dialog box, select the NE2000 Compatible line and then click the
Properties button.
7. Click the Resources tab. Change the IRQ to 9. Change the I/O address range to 340 — 35F.
Click the OK button. (The IRQ setting may change to 9/2.)
8. Click the OK button in the Network dialog box. The system will copy the necessary files and
prompt you to restart your computer. To acquire network service, restart the computer by
clicking OK or pressing ENTER.
GFK-1425B
Touch Display Products: IC752CTD400/450
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the Touch Display to Run on a Microsoft Network
Before setting up your new CIMPLICITY Display Station up for the network, you should consult
with your network administrator. Duplicate TCP/IP addresses and duplicate computer names on the
same network cause network problems. Each computer on a network must have a unique name and
TCP/IP address.
1. Click the Start icon, then click Settings and Control Panel.
2. In the Control Panel window, double click the Network icon. The Network dialog box will
appear.
3. In the Network dialog box, click the Add button.
4. In the Select Network Component Type dialog box, select the Client option. Click Add.
5. Select Microsoft as the manufacturer and Client for Microsoft Networks. Click the OK button.
6. After your system has restarted, go into the Control Panel and double click on the Network
icon.
7. In the Network dialog box, you will see two tabs in addition to Configuration. Click the
Identification tab. You will need to type in your Computer name, Workgroup name, and
Computer Description.
Note
Computer names must be less than or equal to ten characters to run CIMPLICITY
software. Each computer on a network must have a unique name.
In Windows 95 systems, for Viewers and HMIs to be able to browse remote
nodes, the local computer name must be entered into the
/WINDOWS.000/HOSTSfile.
8. To allow sharing,
A. Go to the Configuration tab and click the File and Print Sharing button. The File and Print
Sharing dialog box will appear.
B. Check the File and Print Sharing options that you want and click OK.
9. To add the TCP/IP protocol,
A. go to the Configuration tab and click the Add button. The Select Network Component
dialog box will appear.
B. Click the Protocol icon and click the Add button. The Select Network Protocol dialog box
will appear.
C. In the Manufacturer list, select Microsoft. In the Protocol list, select TCP/IP. Click OK.
10. When you have finished setting up the Network, click OK in the Network dialog box. Click
Yes to reboot your system now.
18
CIMPLICITY® Display Station Touch Display: IC752CTD400/450–March 1998
GFK-1425B
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Windows NT Systems (IC752CTD450)
Before you get started you will need to connect a PS/2 keyboard to the Display Station.
1. Plug in the floppy, keyboard, and power cord.
2. Power on the unit.
3. Read license agreement
4. TAB to your choice and press ENTER.
5. Press Enter to start the Windows NT Setup.
6. Type your name
7. Press the TAB key and type your company name.
8. Press Enter
9. Enter your Windows NT Authentication number found on your Windows NT manual. You
will need to use the TAB key to get to each number field. If correct, press ENTER.
10. Enter a Computer name. This name should be unique to other computers on the same network.
Press ENTER.
Note
Your system has been set up to enable autologon. Autologon allows the system to
boot into Windows NT without your having to use a keyboard to press CTL-ALT-
DEL.
11. You will be prompted for a password.
Note
The password is case sensitive. You must use lowercase ge for the password.
•
To use the autologon feature, type ge for the password. Press the TAB key and type ge in
the Confirm Password box. Press ENTER.
•
•
To skip the password, press ENTER
To assign a password, type in a password, press the TAB key, and type the password in the
Confirm Password box. Press ENTER.
12. Press ENTER to continue with Windows NT Setup.
13. Refer to the network setting for your product part number to set up the network.
14. After completing the network setup the system will copy files over and finalize its setup.
15. At the end you will be ask to reboot the system. Press ENTER.
GFK-1425B
Touch Display Products: IC752CTD400/450
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Network Driver on Microsoft Windows NT Systems
(IC752CTD450)
1. During the initial setup of Windows NT, the system will display a screen with the following
options already selected:.
“This computer will participate on a network.”
“Wired to a network:”.
Press ENTER to accept the default
2. Press the TAB key three times to select “Select from list…” option. Press ENTER.
3. Page down (approximately 29 times) to select “Novell NE2000 Compatible Adapter.” Press
ENTER.
4. You should see your selection on the next screen. If okay, press ENTER.
5. If necessary, consult your network engineer to select the Network protocols and TCP/IP
address selection. In most cases, you will only need, the TCP/IP protocol, but it does not hurt
to enable all the protocols.
6. The Novell NE2000 Compatible Network Card Setup dialog box will pop up. Use the TAB key
and up and down arrow keys to select IRQ2 and I/O Address 340. Press ENTER.
7. The Novell NE2000 Adapter Bus Location dialog box will appear. Press ENTER.
8. In most cases, you will enter a specific unique IP address and not enable the DHCP option.
9. Follow the menus as displayed for finalizing your network setup.
20
CIMPLICITY® Display Station Touch Display: IC752CTD400/450–March 1998
GFK-1425B
Download from Www.Somanuals.com. All Manuals Search And Download.
Login Recommendation
If you enter ge as your Administrator password, your CIMPLICITY Display Station will
automatically log on as Administrator.
Log onto the system as Administrator when you power up the system. Doing so eliminates the
requirement to log on to CIMPLICITY when you run the CIMPLICITY Demo or any other
CIMPLICITY project that includes a user named Administrator. All CIMPLICITY projects are
configured with an Administrator user by default.
Registering Your CIMPLICITY Software
All Display Stations are licensed to run CIMPLICITY software. You will need to register your
CIMPLICITY software by following the steps below. Licenses have been loaded for CIMPLICITY
HMI Base, Trending, TCP/IP Communications, and Series 90 SNP Communications numbers can
be found in the license packs provided. If you purchase additional product options to run on the
Display Station, you will need to contact GE Fanuc to update the system licensing.
1. Click Start, Programs, CIMPLICITY, HMI, Registration.
2. Click Next for new User.
3. Read the License Agreement and select Yes if you agree.
4. Fill in the User Information.
5. Click Next
6. Open your CIMPLICITY software box and find your license packs. Open each license pack
and type the serial numbers in the fields provided.
7. Call the CIMPLICITY phone number that appears on the screen.
Faxes and phone calls will be processed between 8 AM and 5 PM Eastern time, Monday through
Friday, except for regularly scheduled holidays. Faxes and calls received after hours, on weekends,
or holidays will be processed as soon as possible on the following business day.
When you phone, please be prepared to provide GE Fanuc with the following information:
•
•
•
Your User information
CIMPLICITY serial numbers
The System Key Code generated during the registration procedure
Note
When it is installed without the authorization code, you can run the software as a
fully functional system in two-hour increments.
GFK-1425B
Touch Display Products: IC752CTD400/450
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Application Software
The Windows operating system and CIMPLICITY HMI software is loaded onto the Touch Display
unit at manufacture. If it is necessary to reload software, follow the instructions in the
documentation supplied with the software. The following sections give tips for customizing the
software for the Touch Display platform.
External CD-ROM Drive
A driver, BP32DRV, is factory-installed to allow the Micro Solutions Backpack ™ External CD-
ROM Drive to be used for loading software. To enable this driver on units with Windows NT,
select Devices under Control Panel, select BP32DRV, and change Startup setting to System. Close
the Control Panel, shut down, and connect the drive to the parallel port. Restart the system and open
Windows NT Explorer. The CD-ROM should appear as D:. When finished, the driver can be set to
Disabled again. For units using Windows 95, simply shut down, connect the drive, and restart.
Touch Screen Driver for Windows
Operation of the touch screen surround requires the software driver T5driver for Windows 95 .or
TNdriver for Windows NT.
The integral touch-surround of the Touch Display unit is internally connected to the serial port on
the backplane. Parameters must be given to the software driver to match the hardware settings (refer
to Touch-screen Port Address, page 8). The factory default settings are:
COM Port
Address
Interrupt
= CUSTOM
= 310 hexadecimal
= 5
These parameters are written into the Windows SYSTEM.INI file by the touch screen software
driver setup utility. T5driver or TNdriver will be installed, configured and calibrated at
manufacture.
Note
When the above parameters are entered using TNSetup, a message is given that a
line should be added to AUTOEXEC.BAT, such as:
C:\WINDOWS\TBBIOS 3 310
This message can be ignored.
22
CIMPLICITY® Display Station Touch Display: IC752CTD400/450–March 1998
GFK-1425B
Download from Www.Somanuals.com. All Manuals Search And Download.
Shutting Down the Computer
Caution
To avoid damaging files, always shut down Windows software before
removing power from your Display Station product.
To shut down Windows 95 or Windows NT software, select Shut Down from the Start menu.
System Operation
External Mouse
The touch screen and PS/2 mouse will work simultaneously if the mouse is 100% Microsoft or IBM
PS/2 compatible. Because Windows can load only one mouse driver at a time, it is not possible to
provide simultaneous support for a mouse that requires its own specific Windows driver.
CIMPLICITY Software
For detailed software operating instructions, refer to the following documentation.
GFK-1189
GFK-1180
CIMPLICITY® HMI for Windows NT™ and Windows® 95 Important
Product Information
CIMPLICITY® HMI for Windows NT™/CIMPLICITY HMI for
Windows® 95/CIMPLICITY Server for Windows NT™ Base System User
Manual
GFK-1181
GFK-1396
CIMPLICITY® HMI for Windows NT™/CIMPLICITY HMI for
Windows® 95/CIMPLICITY Server for Windows NT™ Device
Communications Manual
CIMPLICITY® HMI for Windows NT and Windows 95 CimEdit
Operation Manual
Communications
For information on the hardware setup for device communications, refer to CIMPLICITY® HMI for
Windows NT™/CIMPLICITY HMI for Windows® 95/CIMPLICITY Server for Windows NT™
Device Communications Manual, GFK-1181.
Your CIMPLICITY Touch Display has been configured with networking components that enable
you to establish new networks or connect to existing networks easily. If you intend to use Microsoft
NetBEUI, TCP/IP, or Direct Cable Connection, some minimal setup changes are required before
you can use the system for network applications. In both Windows 95 and Windows NT systems,
these settings are changed using the Network application in the Control Panel program group.
GFK-1425B
Touch Display Products: IC752CTD400/450
23
Download from Www.Somanuals.com. All Manuals Search And Download.
BIOS Settings
It is normally not necessary to change the hardware configuration settings in the CMOS memory. If
settings become corrupted, follow the procedures here to reload the factory configuration.
Enter the CMOS Setup mode by pressing the DEL key when prompted during the computer power-
up sequence. A screen will appear offering several options for changing settings, restoring default
settings, and other functions. Follow these instructions to restore the factory configuration.
1. Select the Load BIOS Defaults option. Then, select the Save CMOS settings option. You will
be prompted to exit. Do not exit at this time.
2. Go into Standard CMOS Setup and make the following selections:
Primary HDD master
AUTO, LBA mode
NONE
Secondary HDD master
and slave
Primary HDD slave
Drive A
NONE
1.44 MB 3.5” drive
NONE
Drive B
Halt on Errors
All, but keyboard
Exit Standard CMOS Setup.
3. Go into BIOS Features Setup and make the following selections:
Bootup Floppy Seek
Boot Search Order
No
A,C
Exit BIOS Features Setup.
4. Go into Chipset Features Setup. Set parallel port to ECP+EPP. Exit Chipset Features Setup.
5. Select Save and Exit Setup. The startup sequence should begin now.
The system is now configured with factory CMOS settings.
24
CIMPLICITY® Display Station Touch Display: IC752CTD400/450–March 1998
GFK-1425B
Download from Www.Somanuals.com. All Manuals Search And Download.
Interrupt Requests and I/O Assignments
Caution
Each hardware resource in the system must be assigned a unique interrupt
request (IRQ) number and an I/O address range. If these settings overlap,
the system will not function properly.
Below is a list of the factory-set IRQs and addresses used in the system, and whether they are
available for add-in cards. Problems can be avoided if add-on devices use the IRQs and address
ranges labeled "Available". If necessary, the touch screen and network card settings can be changed
to accommodate new hardware that will only work at the settings used by these devices. The
directions for changing the touch screen settings are provided in this document. Utilities for
changing network card settings are in the C:NWCARD directory.
Table 5. IRQ Table
IRQ2/9
IRQ3
Network Adapter
COM 2
IRQ4
COM 1
IRQ5
Touch Screen Controller
Reserved
IRQ6
IRQ7
Reserved
IRQ8
Reserved
IRQ10
IRQ11
IRQ12
IRQ13
IRQ14
IRQ15
Available
Available
Reserved
Reserved
Reserved
Available
Table 6. I/O Port Range Table
000-1FF
200-27F
280-2FF
300-31F
320-33F
340-377
378-3DF
3E0-3EF
3F0-3FF
Reserved
Available
Reserved
Touch Screen Controller
Available
Network Adapter
Reserved
Available
Reserved
GFK-1425B
Touch Display Products: IC752CTD400/450
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Diagnostics and Troubleshooting
This section consists of “Self-Test Diagnostics,” “Troubleshooting,” and “Corrective Actions.”
“Self-Test Diagnostics,” describes how to respond to errors that could be detected by the automatic
self test that is performed each time the Display Station powers up. “Troubleshooting” contains
tables of symptoms, their possible causes, and recommended corrective actions. “Corrective
Actions” contains detailed procedures that are too lengthy to include in the Troubleshooting tables.
Self-Test Diagnostics
The computer automatically performs self-test diagnostics each time it is powered up. The self-test
consists of a series of checks that verify correct performance of the computer hardware. When the
self-test is being performed, you will see the message XXXX KB OK displayed on the screen,
where XXXX is a number that increases until it matches the amount of usable memory.
System Test and Initialization
These routines test and initialize board hardware. If the routines encounter an error during the tests,
you will see an error message on the screen. There are two kinds of errors: fatal and non-fatal. If a
non-fatal error occurs, the system can usually continue the boot up sequence. Non-fatal error
messages usually appear on the screen with the following instruction:
press <F1> to RESUME
Write down the message and press the F1key to continue the bootup sequence.
System Configuration Verification
These routines check the current system configuration against the values stored in the CMOS
memory. If they don’t match, the program will generate an error message. To correct this condition,
you will need to run the BIOS setup program and correct the configuration information in memory.
(Refer to page 24.)
There are three situations in which you might need to change the CMOS settings:
1. You are starting your system for the first time.
2. You have changed the hardware attached to your system.
3. The CMOS memory had lost power and the configuration information has been erased. If this
has happened, call GE Fanuc’s CIMPLICITY hotline.
26
CIMPLICITY® Display Station Touch Display: IC752CTD400/450–March 1998
GFK-1425B
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Powerup
Symptom
Possible Causes
Solution
For Windows NT systems only:
The following error message
appears:
You did not type ge for the
password during initial setup.
Set the logon password to ge. For
instructions, see “Auto Logon
Error Message” on page 33.
The system could not
log you on. Make sure
your User name and
Domain are correct ...
Display Station does not power
up.
Power not on (PWR indicator not
lighted or display completely
dark).
Make sure that Display Station is
plugged in. Make sure that power
source is functioning properly.
Display is blank (PWR indicator is See “Display” on page 28.
lighted).
See “Display” on page 28.
Non-System disk or disk
errormessage displayed.
Disk in floppy disk drive.
Remove floppy disk and then
reboot or power cycle.
Safe Recovery Error
message displayed.
Occurs on initial power up if the
unit is accidentally turned off
without first shutting down the
Windows 95 software.
The Display Station will power up
normally.
Memory count during powerup
self-test is incorrect.
Optional SIMM is installed
incorrectly or is incompatible with memory is installed correctly.
the Display Station CPU.
Make sure that the appropriate
CMOS checksum error —
Defaults loaded
CMOS battery failure.
Note: This battery has a lifetime
of up to 10 years under normal
operating conditions. The battery
is not field replaceable. For more
information, see “CMOS
CMOS battery failed
message displayed.
Checksum Error” on page 33.
A screen appears just after
powerup, or just after reset, which
has the title “CMOS Setup
Utility.”
Cycle power again. The Display
Station will power up normally.
The DEL key has been
accidentally pressed.
The Display Station reset even
though the power was not
interrupted.
This should never be done, unless
you are attempting to reset the
Display Station.
The CTRL-ALT-DEL keys were
pressed twice at the same time.
A:> appears instead of software.
A system floppy disk is inserted.
Remove disk and cycle power.
GFK-1425B
Touch Display Products: IC752CTD400/450
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Display
Symptom
Characters are dim.
Possible Causes
Solution
Computer screen is in direct light.
Change lighting or adjust contrast.
Display is blank (PWR indicator is Screen has overheated.
lighted).
If Display Station is in direct
sunlight, move it and allow it to
cool.
Display Station is set up for
invalid video mode.
Reboot.
Windows NT models: select VGA
Mode
Windows 95 models: press F8
when “Starting Windows 95”
appears, then select Safe Mode.
If Windows is now displayed, go
into Control Panel, Display
Settings, and change settings to
the correct video driver and mode.
Contact GE Fanuc’s
CIMPLICITY hotline for more
information.
Screen saver is active.
Touch the touch screen, or a key
on the keypad.
Memory
Symptom
Possible Causes
Solution
Memory count during powerup
self-test is incorrect.
Optional SIMM is installed
incorrectly or is incompatible with memory is installed correctly.
the Display Station CPU.
Make sure that the appropriate
Out of Memorymessage is
displayed or insufficient memory
error occurs during operation.
System ran out of memory for the
application.
Check the memory requirements
for the application. (Refer to the
application documentation.)
Install additional memory.
Too many terminate and stay
resident (TSR) programs running.
Modify the startup folder to use
only those TSR applications that
are really needed.
28
CIMPLICITY® Display Station Touch Display: IC752CTD400/450–March 1998
GFK-1425B
Download from Www.Somanuals.com. All Manuals Search And Download.
Touch Screen
Note
Operating temperature can affect touch screen calibration. If touch screen
operation is slightly off, recalibrate it by running calibration from the Touch
Screen icon in Control Panel.
Symptom
Possible Causes
Solution
Cursor does not respond at all to
touch.
Touch screen disabled.
Make sure documented default
touch screen settings are selected.
Touch screen driver accidentally
deleted.
Reinstall touch screen driver
System is busy.
Press CTRL-ALT-DELETE once to
view task list.
Cursor moves but does not follow
your touch accurately.
Touch screen not calibrated
properly.
Run calibration from ELO Touch
Screen in Control Panel (see page
33).
Touch screen responds erratically
to touch; cursor might not be
visible.
Display Station is connected to a
serial mouse.
Disconnect serial mouse, connect
a PS/2 mouse, and reboot.
Touch screen settings are
incorrect.
Refer to page 22 for settings.
External PS/2 Mouse
Symptom
Possible Causes
Solution
Cursor does not respond to mouse
movement
Mouse not plugged in.
Plug mouse into mouse port on
Display Station and reboot.
The type of mouse is not
supported.
Use a PS/2 mouse.
System is busy.
Press CTRL-ALT-DELETE to view
task list.
Mouse not detected.
Restart Display Station product
with external mouse connected.
Keyboard
Symptom
Possible Causes
Solution
External keyboard locks up
The type of keyboard is not
supported.
Use a Key Tronic keyboard. (Most
keyboards will work. However, we
recommend a keyboard
manufactured by Key Tronic.)
Keyboard not plugged into
Plug keyboard in.
keyboard port on Display Station.
System is busy.
Press CTRL-ALT-DELETE to view
task list.
GFK-1425B
Touch Display Products: IC752CTD400/450
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Communications
PLC/CPU Connection
Symptom
Possible Causes
Solution
CIMPLICITY does not
communicate with a PLC that has
been autoconfigured
(AUTOCONFIG/DEFAULT/I/O
error).
The system is attempting to
communicate with a 90-30 PLC
using the SNP driver and a
CIMPLICITY project.
1. With the PLC powered up and
connected to the Display Station,
establish communication between
the Display Station and PLC via
the 90-30 SNP driver.
2. Using a Hand-Held
Programmer, toggle the Default
I/O (Enable or Disable)
configuration parameter for the
CPU. Communications between
the Display Station and the PLC
will be stopped. (Communications
are stopped when you toggle from
Enable to Disable, or vice versa.)
3. Power cycle the PLC.
Communications between the host COM port not configured in
Verify that the COM port is
configured in the system.
computer and the controller are
unsuccessful.
system.
Cabling between computer and
controller.
Verify that the cable between the
computer and the controller is
correctly wired.
Baud rate and parity configured
incorrectly.
Verify that the baud rate and
parity on the computer are
consistent with those on the
controller.
Wrong address.
Verify that the slave address is
correct.
30
CIMPLICITY® Display Station Touch Display: IC752CTD400/450–March 1998
GFK-1425B
Download from Www.Somanuals.com. All Manuals Search And Download.
MODBUS RTU Communications
Symptom
Possible Causes
Solution
Communications between the host COM port not configured in
Verify that the COM port is
configured in the system.
computer and the controller are
unsuccessful.
system.
Cabling between computer and
controller.
Verify that the cable between the
computer and the controller is
correctly wired.
Baud rate and parity configured
incorrectly.
Verify that the baud rate and
parity on the computer are
consistent with those on the
controller.
MODBUS port not configured for
RTU communications.
Verify that the controller's
MODBUS port is configured for
RTU communications.
Wrong address.
Verify that the slave address is
correct.
Network Communications
Symptom
Possible Causes
Solution
Conflicts on network.
IP Address not unique.
Change the IP address to a unique
address. (Contact your system
administrator if this or other
settings need to be changed.)
GFK-1425B
Touch Display Products: IC752CTD400/450
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
Symptom
Possible Causes
Solution
Printer will not turn on.
Cables not connected properly.
Ensure that the cables are properly
Printer power cord not plugged in. connected and that the power cord
is connected to the electrical
outlet.
Printer will not print.
Printer is not turned on.
Printer is not online.
Turn on the printer
Set the printer to online.
The device drivers for your
application are not installed.
Install the correct printer drivers
for your application in Windows.
Printer that is set up for a network
is not connected to the network.
Connect the printer to the
network.
Printer cable is too long,
unshielded, or defective.
Replace the cable.
Printer is offline.
Paper tray is empty.
Fill the paper tray with paper. Set
printer to online.
Printer prints garbled information. Correct printer drivers not
installed.
Install the correct printer driver.
Cable is not connected properly.
Ensure that the printer cable is
connected properly to the
computer.
Problem specific to printer.
Run a printer self-test. Refer to the
documentation provided with your
printer for instructions. If the self-
test fails, the problem is printer-
specific. The printing section of
the software documentation and in
Windows online Help may also be
helpful.
32
CIMPLICITY® Display Station Touch Display: IC752CTD400/450–March 1998
GFK-1425B
Download from Www.Somanuals.com. All Manuals Search And Download.
Corrective Actions
Auto Logon Error Message
All Windows NT CIMPLICITY Display Station products have the auto logon feature enabled with
ge as the password. This feature eliminates the need for a keyboard to type CTRL-ALT-DEL and
enter a password. If, during initial setup, you do not type ge as your password, you will receive the
following error message each time the system is booted.
Logon Message
The system could not log you on. Make sure your User name and
Domain are correct, then type your password again. Letters in
the password must be typed using the correct case. Make sure
that Caps Lock is not accidentally on.
This message means that auto logon could not occur because the password is something other than
ge. If you want to enable auto logon and avoid the error message, complete the following
instructions:
1. Click Start, Programs, Administrative Tools, and User Manager.
2. If Administrator is highlighted, click User in the top task bar and select Properties.
3. In the Password and Confirm Password fields, type ge. Click OK.
4. Press ALT-F4 to close the User Window.
If you wish to log on manually, click OK to the error message and log on normally. To eliminate the
error message for future manual logons, you will need to edit the registry on your Display Station
product. For details on editing the registry, you will need to call the CIMPLICITY hotline.
Calibrating the Touch Screen
During the first time powerup of the Display Station, you might need to calibrate the touch screen.
To do this, connect an external PS/2 mouse or a PC AT keyboard and complete the following steps:
1. Click the Start button. (If you are using a keyboard, press CTRL-ESC to bring up the Start
menu.)
2. Go to Settings and select Control Panel.
3. Select the ELO Touchscreen icon.
4. Press Enter to run the calibration. Follow the instructions presented by the calibration program.
GFK-1425B
Touch Display Products: IC752CTD400/450
33
Download from Www.Somanuals.com. All Manuals Search And Download.
CMOS Checksum Error
If the CMOS battery has failed, the following error messages will be displayed on the screen:
CMOS checksum error - Defaults loaded
CMOS battery failed
If you see the above message, you can still operate the Display Station by pressing the DELETE key
and manually setting up the system. (You will need to set up the computer each time the system is
powered up.) For setup parameters, refer to “BIOS Settings.”
This battery has a lifetime of up to 10 years under normal operating conditions. The battery is not
field replaceable. The Display Station unit must be returned to GE Fanuc to correct the problem.
34
CIMPLICITY® Display Station Touch Display: IC752CTD400/450–March 1998
GFK-1425B
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently Asked Questions
Hardware FAQs
My touch screen isn’t working. What should I do?
Ensure that the Touch Screen settings (in the Control Panel, double click the Touch Screen icon)
are set as described in “Touch Screen Driver for Windows” on page 22.
Where is the right mouse button when using the touch screen?
This feature is not supported on the touch screen.
Can I use an external mouse and the touch screen at the same time?
Yes. A external PS/2 mouse can be used with the touch screen if the system is rebooted after it is
connected. True for these models?
How do I clean the touch screen?
Touch screens can be wiped down with a clean cloth or paper towel dampened with water or glass
cleaner.
How do I upgrade the Touch Display RAM?
All Touch Display products have at least 32MB of RAM installed in the factory. You can order
additional RAM with your initial order or upgrade at a later time. Currently, you can upgrade to
64MB (IC752RAM032) or 128MB (IC752RAM128) of RAM.
My Touch Display unit has a 1.2GB hard drive. How can I get a larger drive?
Hard drives must be installed in the factory to retain the Touch Display warranty. An upgrade to a
2GB drive is available. To upgrade your drive, send the Touch Display product to the factory and
order the upgrade part number (IC752HDD200). Touch Display products can be ordered initially to
include this upgrade.
Can I upgrade the CPU in my Touch Display?
All Touch Display products contain at least Pentium 133 CPUs. Upgrades to Pentium 200 are
available. All CPU upgrades must be done in the factory to retain the warranty.
GFK-1425B
Touch Display Products: IC752CTD400/450
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Software FAQs
What HMI software comes preloaded on the Touch Display product?
Beginning in mid-February 1997, all units come preloaded with the full point count version of HMI
software. You can get either Windows ’95 or Windows NT operating system with the
development/runtime packages. All Touch Display products come with server packages but can be
operated as viewers.
Will Display Station products with limited point counts be offered?
There are no plans for this at this time.
I am using the touch screen and would like to know if I can log on to an NT System without a
keyboard. Can I do this?
All systems have autologon enable for Administrator with ge as the password. For details, see page
21.
To disable the screen logon message, refer to the CIMPLICITY Web page at
describes how to create a default logon for the operating system that also acts as a logon for
CIMPLICITY so that you only need to turn on the machine to have CIMPLICITY come up and be
ready for use.
I heard that there is now a longer period that the software will run without authorization. What are
the details?
You should go ahead and register your CIMPLICITY software. The period of four days starts when
CIMPLICITY is first loaded. Your system will default to the two-hour limit because the four days
will have expired.
36
CIMPLICITY® Display Station Touch Display: IC752CTD400/450–March 1998
GFK-1425B
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Features
Microprocessor
Pentium 133 MHz
Math Coprocessor
built in
User memory
32 Mbyte
Operating System
Microsoft Windows 95 or Microsoft Windows NT
1.2 Gbyte
Hard Disk
ISA bus card slots
Six total. Two full length slots available for additional cards.
+5 VDC, 1.2 A approx.
Total current available for sharing by up to two user cards
+12 VDC, 0.1 A approx.
-12 VDC, 0.1 A approx.
Display
Type
640 x 480 pixel
Color TFT (thin film transistor) active matrix LCD
Area
211 x 159mm (8.31 x 6.26 inches)
Power Requirements
AC Input
85 to 250 VAC, 110 W, Auto-ranging, 47 to 63 Hz
4 A (90 to 132 VAC) 2 A (180 to 250 VAC.)
17 A at 110 VAC, 34 A at 220 VAC
Fuse Rating
Inrush Rating
Ports
Parallel Ports
Serial Ports
One LPT1
Two external RS232 ports: COM1 and COM2
Also CUSTOM COM (wired internally to touch-screen)
Keyboard Port
PS/2
Floppy Disk Interface
3.5 inch, 1.44 Mbyte via 37-pin D-type connector
Configured as drive A:
Environmental
Operating Temperature
Relative Humidity
Drop Test
Ambient working temperature range 0 to 40 oC
5 to 85% non-condensing
1 meter drop onto any face within packaging
GFK-1425B
Touch Display Products: IC752CTD400/450
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
E
A
Error messages
B
Backplane
C
F
Floppy disk drive
Catalog numbers
floppy disk drive
Touch Display
H
Catalog numbers, upgrades
I
Installing Network Driver
CIMPLICITY software
COM Ports connector, 14
K
L
D
Diagnostics
M
Display
Memory
MODBUS RTU communications
GFK-1425B
Index-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
N
Network communications
P
PLC/CPU connection
Powerup
W
Printing
R
Reset
S
Serial Communication Cables, 14
Serial Mouse
Serial Port connector, 14
T
Touch screen
Troubleshooting
Index-2
CIMPLICITY® Display Station Touch Display: IC752CTD400/450–March 1998
GFK-1425B
Download from Www.Somanuals.com. All Manuals Search And Download.
|