JT952SK
GE Profile™ 30" Built-In Double Oven
Dimensions and Installation Information
Cutout width
28-1/2'' MIN.
28-5/8'' MAX.
C
L
KW Rating
2 x 4 or
5
Cutout
depth
23-1/2"
MIN
equivalent
runners
7.2
5.4
240V
208V
Junction
box
Breaker Size
E
A
location
Suitable
bracing
40 Amps
30 Amps
240V
208V
B
to support
runners
Conduit
(48-1/2"
long)
18"
over centerline
of cabinet
47" to
Cabinet
30"
11/16"-3/4"
1"
(Must Support 275 LBS.)
bottom of
junction
box
Cutout height
51-13/16" MIN.
51-15/16" MAX.
A - Overlap of Oven Over Side Edges of Cutout
B - Overlap of Oven at Bottom of Cutout
Oven
D
A
C - Overall Depth
23-1/2"
52-7/8"
29-3/4"
21
D - Overall Height
21" minimum
Door Opening
Allowance
E - Overall Width
B
Minimum cutout
location 12"
from the floor.
C
Note: Cabinets installed adjacent to wall ovens must have an adhesion
spec of at least a 194°F temperature rating. Electric wall ovens are not
approved for installation with a plug and receptacle. They must be
hard wired in accordance with installation instructions.
Cabinet
width 30"
MOST 30'' WALL CABINETS CAN BE USED WITH THIS UNIT.
THE OPENING BETWEEN THE INSIDE WALLS MUST BE AT LEAST 28-1/2'' WIDE.
Installation Information: Before installing, consult installation
instructions packed with product for current dimensional data.
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Dimension and installation information are shown in inches.
Listed by
Underwriters
Laboratories
R
Specification Created 1/05
220131
Download from Www.Somanuals.com. All Manuals Search And Download.
|