GE Oven ECD User Manual

Use and Care Manual  
Classic Wall Oven  
For use with ECD, ECS, MCD, MCS, PCD and PCS series models  
Ta b l e o f C o n t e n t s  
Important Safety Instructions ............................................. 1-2  
Oven Operation ........................................................... 3-11  
Care and Cleaning ..................................................... 12-15  
Before You Call For Service.......................................... 16-17  
Service and Product Warranty........................................... 18  
Notes ........................................................................ 19-20  
Place Serial Number Label Here  
Part No. 65031 Rev. J  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Im p o r t a n t Sa f e t y In S t r u c t Io n S  
Installer: LEavE tHESE iNStRuCtioNS witH tHE  
aPPLiaNCE.  
danger  
Important: to avoid the possibility of explosion or fire, do not  
store or use combustible, flammable or explosive vapors and  
liquids (such as gasoline) inside or in the vicinity of this or any  
other appliance. Keep items that could explode, such as aerosol  
cans away from the burners and oven. Do not store flammable  
or explosive materials in adjacent cabinets or areas.  
Consumer: read thIs use and Care manual  
Completely before usIng thIs applIanCe. save It  
for future referenCe. It ContaIns Important use  
and Care InformatIon. Keep your sales reCeIpt or  
CanCeled CheCK In a safe plaCe. proof of orIgInal  
purChase date Is requIred for warranty servICe.  
warnIng  
if you have any questions, call:  
warnIng – never use this appliance as a space heater  
to heat or warm the room. Doing so may result in carbon  
monoxide poisoning and overheating of the appliance.  
Dacor Customer Service  
(800) 793-0093 (u.S.a. and Canada)  
Monday — Friday 6:00 a.m. to 5:00 p.m. Pacific time  
warnIng  
Have the complete model and serial number identification of your  
appliance ready.  
warnIng - never cover any slots, holes or passages in the  
oven bottom or cover an entire rack with materials such as  
aluminum foil. Doing so blocks air flow through the oven and  
may cause carbon monoxide poisoning. aluminum foil linings  
may also trap heat, causing a fire hazard.  
Model Number ________________________________________  
Serial Number ________________________________________  
Date of Purchase______________________________________  
for service and warranty information, see page 18.  
Since Dacor is constantly improving the quality and performance  
of our appliances, we may need to make changes to the  
appliance without revising this manual.  
Important Information about safety  
Instructions  
the Important Safety Instructions and warnings in this manual  
cannot cover all possible problems and conditions that can occur.  
use common sense and caution when installing, maintaining or  
operating this appliance.  
always contact the manufacturer about problems or conditions  
you do not understand.  
safety symbols and labels  
danger  
danger – immediate hazards that wIll result in severe  
personal injury or death.  
warnIng  
warnIng – Hazards or unsafe practices that Could result in  
severe personal injury or death.  
CautIon  
CautIon – Hazards or unsafe practices that Could result in  
minor personal injury or property damage.  
read and save these InstruCtIons  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Im p o r t a n t Sa f e t y In S t r u c t Io n S  
General Safety Precautions  
to reduce the risk of fire, electric shock, serious injury or death when using your oven, follow basic safety precautions, including the  
following:  
warnIng  
warnIng  
if you receive a damaged product, immediately contact  
your dealer or builder. Do not install or use a damaged  
appliance.  
Do not use the oven for storage.  
Clean and maintain the oven regularly as instructed in this  
manual. Keep the entire oven free of grease that could  
catch fire. Clean only those parts listed in this manual.  
Make sure that the oven has been properly installed  
and grounded by a qualified installer according to the  
accompanying installation instructions. Have the installer  
show you the location of the fuse or junction box so that  
you know where and how to turn off power to the oven.  
Do not touch the outside surfaces of the oven during the  
self-clean cycle. they will be hot.  
use cookware only for its intended purpose. Check the  
manufacturer’s recommendations before use to determine  
if a utensil is suitable for use in an oven. Certain types of  
glass, ceramic and earthenware are not suitable for use in  
the oven. Personal injury or damage may result from the  
improper use of cookware.  
Do not install, repair or replace any part of the oven unless  
specifically recommended in the literature accompanying  
it. a qualified service technician should perform all other  
service.  
Before performing any type of service, make sure that  
the electrical power to the oven is turned off at the circuit  
breaker or fuse box.  
Exercise caution when opening the oven door. Let hot air or  
steam escape before looking or reaching inside.  
use extreme caution if adding water to food in the oven.  
the steam can cause serious burns or scalds.  
only use the oven for cooking tasks expected of a home  
appliance as outlined in this manual. this oven is not  
intended for commercial use.  
use only dry pot holders when removing food and  
cookware from the oven. wet pot holders can cause steam  
burns.  
Do Not touCH tHE iNtERioR SuRFaCES oF tHE  
ovEN DuRiNG oR iMMEDiatELY aFtER uSE.  
For your safety, do not use the oven to cook without the  
convection filter(s) installed. when the filter is not installed,  
the spinning fan blades at the back of the oven are  
exposed.  
Make sure individuals who use the oven are able to operate  
it properly.  
Never allow anyone, including children to sit, stand or climb  
on any part of the oven including the door. Doing so may  
cause tipping, damage, serious injury or death.  
Do not allow food to sit in the oven for more than one hour  
before or after cooking. Eating spoiled food can result in  
food poisoning.  
Do not leave children alone or unattended in the area  
around the oven. Do not allow children to play with the  
controls, pull on the handle(s) or touch other parts of the  
oven. Do not store items of interest to children above the  
oven. Children could be burned or injured while climbing on  
the appliance.  
Do not leave metal objects, such as aluminum foil, the meat  
probe or cookie sheets on the bottom of the oven. Do not  
allow the broil elements on the ceiling of the oven chamber  
to be covered up. Do not line the oven with aluminum foil or  
other materials. Doing so may cause the oven or the items  
in it to overheat, creating a fire hazard or causing property  
damage.  
Do not tamper with the controls.  
to prevent the unit from tipping forward and to provide  
stable installation, make sure the oven is secured to  
the cabinet according to the accompanying installation  
instructions.  
Non-stick coatings, when heated, can be harmful to birds.  
Remove birds to a separate, well-ventilated room during  
cooking.  
Do not heat unopened food containers such as baby food  
jars and cans. Pressure build up may cause the container  
to burst and cause injury.  
Before Self-Cleaning the oven, remove the broiler grill and  
pan, oven racks, convection filter and any other utensils,  
and wipe up excess spills. Do Not LEavE FooD oR  
CooKiNG utENSiLS, EtC., iN tHE ovEN DuRiNG tHE  
SELF-CLEaN CYCLE.  
Do not use water on grease fires. a violent steam explosion  
may result. Smother any flames with a lid, cookie sheet  
or flat tray. use baking soda or a foam extinguisher to  
extinguish flaming grease. Be careful to avoid getting  
burned.  
Do not clean the door gasket, because rubbing, moving  
or in any way damaging the gasket, may eliminate the  
required tight door seal.  
Keep flammable items, such as paper, cardboard, plastic  
and cloth away from and out of the oven. Do not allow pot  
holders to touch hot surfaces.  
Do not use commercial oven cleaners or oven liner  
protective coatings on any part of the oven. Do not use  
caustic cleaners or detergents on this appliance, as these  
may cause permanent damage. Do not use aerosol  
cleaners, as these may be flammable or cause corrosion of  
metal parts.  
Do not use towels or bulky cloth as pot holders. Do not  
wear loose or hanging apparel while using the oven. Do not  
allow clothing to come into contact with the interior of the  
oven and surrounding areas during and immediately after  
use.  
Do not allow acids (citrus juices, tomato sauces, etc.) to  
remain on the oven cell surfaces. the porcelain finish may  
stain.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
ov e n op e r a t Io n  
Getting Started  
Setting The Time Of Day  
Before using your oven, become familiar with the features and  
control panel layout (see pages 4 and 5).  
follow these two steps to set the correct time of day:  
1. Press the CloCK key. the time of day will flash, “am” or  
“pm” will be displayed, and “tIme” will flash in the display.  
Below the oven mode touch keys are three touch keys  
labeled CANCEL • SECURE, lIght and CooK tIme. the  
CANCEL•SECURE key enables the user to cancel the selection  
of an oven mode or delay timed program, or disable the control  
panel. the lIght key turns the interior oven light on and off. the  
lIght key will remain functional if the control panel has been  
disabled. the CooK tIme key is used to select the length of time  
for a cooking process in delay timed cooking mode.  
2. Press the key “+” or “–” until the correct time of day is  
displayed and release.  
Securing the Controls  
to avoid accidentally turning the oven on, activate the secure  
feature. Press and hold the CANCEL • SECURE key for  
approximately three seconds. Doing so will disable the control  
panel and allow cleaning the controls without accidentally starting  
any functions. three beeps will sound and “off” will appear in  
the display when the control panel has been secured.  
Clock functions are selected by pressing the keys located below  
the clock display and oven mode keys. oven functions are chosen  
by pressing the key for the desired mode. once a clock or oven  
function has been chosen, a description of the selection will flash  
in the clock display area.  
to re-activate the control panel, again push and hold the CanCel  
• SECURE key for three seconds. three beeps will sound and  
“off” will disappear from the display.  
Important: after choosing a clock function or oven mode, you  
have six seconds to perform the next programming step. if the  
next step is not complete within six (6) seconds, the program  
selection displayed on the clock will disappear. Should this occur,  
just repeat the initial function selection.  
oven features  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
ov e n op e r a t Io n  
Control Panel  
Control panel - epicure® models eCd227 and eCd230  
Control panel - epicure® models eCs227 and eCs230  
Control panel - epicure® models eCs127, eCs130 and eCs136  
Control panel - millenniamodels mCd227 and mCd230  
Control panel - millenniamodels mCs227 and mCs230  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
ov e n op e r a t Io n  
Control panel - millenniamodels mCs127 and mCs130  
Control panel - preferencemodels pCd227 and pCd230  
Control panel - preferencemodel pCs230  
Control panel - preferencemodel pCs130  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
ov e n op e r a t Io n  
Oven Racks and Support  
three chrome-plated convection racks are provided in the oven.  
always remember to position the racks prior to heating the oven.  
also, remove the oven racks prior to self-cleaning to prevent  
permanent discoloration of the racks.  
the porcelain rack supports provide six heights for positioning of  
the oven racks.  
to install a rack, align the left and right edges of the rack with the  
horizontal guide rails of the rack supports, then slide the rack into  
the oven.  
GlideRack Oven Rack  
Dacor’s GlideRack oven rack is designed to install effortlessly  
and glide at a full extension. the full extension of the rack allows  
you to slide pizza on and off with great ease when using Dacor’s  
optional pizza stone (model number aBS20). it is also great for  
large roasts in large roasting pans. it will also allow you to baste  
more easily and check temperatures of the food more safely and  
quickly.  
oven rack positions  
helpful hints when using your gliderack oven rack  
the GlideRack oven rack works particularly well with heavier  
items, but you can use it during any type of baking, broiling or  
roasting in your Dacor oven.  
the GlideRack racks need to be spaced out when using more  
than one in the oven at a time. For instance, they should be  
used in rack positions 1, 3 and 5 or 2 and 4, counting up  
from the bottom, instead of positions 2, 3 and 4.  
note: when fully extending the rack while in the first position,  
the rack may rest on the inner door.  
Installation:  
1. Fully extend the two side guides. align the two small clips  
on the bottom at the rear of the rack with the black porcelain  
rack guides in the oven.  
when using the GlideRack rack with Dacor’s aBS20 baking  
stone, use rack position 1 for best results.  
Heavier roasting pans and dishes will also cook better on  
rack position 1.  
2. Begin to slide the rack in, then lift up. the GlideRack oven  
rack must be in between the two clips on the upper and lower  
side of the rack rear.  
Do not leave any of the racks in the oven during self-clean.  
they may be damaged and/or will become difficult to slide  
in and out if self-cleaned. in addition, remove the convection  
filter in the back of the oven before self-cleaning.  
3. Push the rack all the way to the back.  
4. Grasp the rack in the front center and pull. the rack should  
come forward while the side guides remain in place.  
to clean the racks, use hot, soapy water and the rough side  
of a sponge.  
Oven  
rack  
Glide clips  
gliderack oven rack  
Installation  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
ov e n op e r a t Io n  
Oven Modes  
Oven Mode Selection  
all oven modes are described below:  
Follow these steps to manually operate the oven in standard  
bake, Pure Convection or convection bake mode:  
standard baKe in standard bake mode, the bottom  
heating element provides conventional radiant heat.  
Temperatures may be set from 135˚F to 555˚F in 5˚F  
increments. use standard bake for single rack baking and  
roasting.  
1. Position oven rack(s) at the proper height(s).  
2. Press the baKe, pure ConveCtIon or ConveCtIon  
baKe key. the oven will beep once, the selected cooking  
mode will flash, and “– – –” will be displayed.  
standard broIl the high wattage, top heating  
element supplies the heat in Broil mode. the broil  
temperature is adjustable from 135˚F, to the “HI” setting  
(equivalent to 555˚F) for greater cooking flexibility. Broiling  
is always performed with the door closed.  
3. Press either the “+” or “–” key. the default temperature of  
350˚F will be displayed.  
4. To adjust the cooking temperature from 350˚F, press and  
hold the TIME • TEMP key. (Press “+” key to increase the  
temperature setting, “–” to decrease). “pre” and “on” will  
appear in the clock display, and the oven will begin to heat.  
the convection fan will turn on to help stabilize the oven  
temperature during pre-heat. in standard bake mode, the  
convection fan will turn off once the desired temperature  
is attained. if in a convection mode, the convection fan will  
turn on. also, the clock display will change from the desired  
cooking temperature to the actual oven temperature, starting  
with 135˚F. The temperature display will increase in 5˚F  
increments until the desired temperature is reached. the  
cooling fan will turn on when the oven temperature reaches  
200˚F. When the desired temperature is attained, the pre-heat  
cycle is complete. the clock will beep once and “pre” and  
“on” will disappear from the display. (From this time forward,  
the “on” display will cycle on and off with the heating  
elements.)  
ConveCtIon broIl the high wattage, top heating  
element supplies the heat in broil mode in combination with  
the convection fan for better heat distribution. the broil  
temperature is adjustable from 135˚F to the “HI” setting  
(equivalent to 555˚F) for greater cooking flexibility. This  
mode is available only on models ECD230, PCD230, and  
MCD230. Convection broil is always performed with the  
door closed.  
pure ConveCtIonin Pure Convection mode a third  
heating element, encircling the convection fan located in  
the rear of the oven chamber, acts as the heat source.  
the convection fan draws air from the oven chamber, then  
forces it across the hot convection heating element. the  
heated air is directed back into the oven chamber through  
the convection baffle. the baffle distributes the heated air  
evenly to ensure uniform results. temperatures may be  
set from 135˚F to 555˚F in 5˚F increments. Use this mode  
for single rack baking, multiple rack baking, roasting and  
preparation of complete meals.  
5. Carefully place the food onto the desired rack(s) within the  
pre-heated oven.  
6. it is recommended that you set a minute timer to time the  
cooking process (see page 11).  
ConveCtIon baKe in this combination convection-  
radiant mode, the lower element provides the heat. as  
in Pure Convection mode, the convection fan and baffle  
combine to circulate heated air evenly throughout the oven  
chamber. Temperatures may be set from 135˚F to 555˚F  
in 5˚F increments. Use this mode for single rack baking,  
multiple rack baking and roasting.  
7. when the time expires and/or the food is done cooking, press  
the CANCEL • SECURE key to turn off the oven.  
pre-heating the oven  
the oven features an automatic pre-heat cycle that rapidly  
brings the oven chamber up to temperature. Simply by choosing  
a cooking mode and setting a temperature, the oven will  
automatically perform the pre-heat function. the pre-heat cycle  
operates in standard bake, Pure Convection and convection bake  
modes. there is no pre-heat cycle for the broil or convection broil  
modes.  
temperature probe the temperature probe can be  
used in combination with standard bake, Pure Convection,  
or convection bake modes. the temperature probe takes  
the guesswork out of roasting by cooking food to the exact  
internal temperature you desire. the temperature range  
that the probe will read is from 100˚F to 200˚F.  
note:  
For faster heat up, the broil element comes on during  
pre-heat. For best results, allow the oven to pre-heat prior to  
placing food inside.  
self-Clean in the pyrolytic self-clean mode, the oven  
reaches temperatures of 850˚F, thereby burning off oven  
soil automatically. the self-clean time is adjustable up to  
four hours so that varying degrees of oven soil can be  
successfully removed. also, the self-clean cycle can be  
delayed to start at a later time if desired.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
ov e n op e r a t Io n  
wait until the shortest recommended baking time before  
checking food. For baked goods, a wooden pick placed in the  
center should come clean when the food is done.  
What Is Pure Convection?  
Your new oven has the best cooking system available today,  
Pure Convection. Pure Convection is a total system approach to  
cooking. the heat source is a third element outside the cooking  
cell behind a baffle. Not only does the baffle separate the food  
from the heat source, it channels the air from the convection fan  
evenly into the cell eliminating any hot or cool spots in the oven.  
this system is what allows multi-rack cooking while achieving  
even results from one rack to another.  
Place pans carefully on the oven racks. turn pans on the  
racks so that the long sides run left to right, parallel to the  
door.  
adjustments to recipe times and temperatures need to be  
made when baking at high altitudes. Consult a cookbook on  
high-altitude cooking.  
bakeware tips:  
the other component in Pure Convection is the filter. the filter  
eliminates the transference of flavors when cooking entire meals  
and also keeps the oven cleaner.  
Cakes, quick breads, muffins and cookies should be baked in  
shiny, reflective pans for light, golden crusts.  
Medium gauge aluminum sheets with low sides should be  
used when preparing cookies, biscuits and cream puffs.  
Bake most frozen foods in their original foil containers placed  
on a flat cookie sheet. Follow the package recommendations.  
AIR FLOW  
when using glass bakeware, reduce the recipe temperature  
by 25˚F, except when baking pies or yeast breads. Follow the  
standard recipe baking time for pies and yeast breads.  
Multiple Rack Baking  
the uniform air circulation provided by Pure Convection cooking  
enables the full oven capacity to be utilized. Many foods, such  
as pizzas, cakes, cookies, biscuits, muffins, rolls and frozen  
convenience foods can be successfully prepared on either two  
or three racks at the same time. additionally, complete meals  
can be prepared by using multiple racks. See below for specific  
recommendations. Follow the steps in the oven modes section  
to manually operate the oven, or refer to the delay timed  
Cooking section below for automatic operation.  
heated air Circulation in Convection modes  
Baking and Roasting Tips  
standard recipes or your own personal favorites.  
multiple rack baking tips:  
all modes can be used to successfully prepare meals using  
typically, when baking on two racks, use rack positions 2 and  
4 or 3 and 5. when baking on three racks, use rack positions  
1, 3 and 5.  
Because of variations in food density, surface texture and  
consistency, there are a few foods that may be prepared more  
successfully in the standard bake mode. For this reason, standard  
bake mode is recommended when preparing baked goods such  
as custard. the user may find other foods that are also prepared  
more consistently in standard bake mode. this is perfectly normal.  
when adapting a single rack recipe to multiple rack baking,  
it may be necessary to add to the baking time. this is due to  
the extra amount of food in the oven.  
Broiling  
as a general rule, to convert conventional Standard Bake  
recipes to convection recipes, reduce temperature by 25˚F  
and the cooking time by approximately 10%.  
Broiling is a quick and flavorful way to prepare many foods,  
including steaks, chicken, chops, hamburgers and fish. Broiling  
in the oven is performed with the oven door completely shut. it is  
normal and necessary for some smoke to be present to give the  
food a broiled flavor. the broil temperature may be adjusted in  
5˚F increments from 135˚F up to the maximum setting of “HI”. The  
“HI” setting is equivalent to 555˚F.  
Some recipes, especially those that are homemade, may  
require adjustment and testing when converting from  
standard to convection modes. if unsure how to convert  
a recipe, begin by preparing the recipe in standard bake  
mode. after achieving acceptable results this way, follow the  
convection guidelines listed. if the food is not prepared to  
your satisfaction during this first convection trial, adjust only  
one recipe variable at a time (such as cooking time, rack  
position or temperature) and repeat the convection test. if  
necessary, continue adjusting one recipe variable at a time  
until satisfactory results are achieved. See Common Baking  
Problems on the facing page for additional information.  
Do not open the oven door frequently during baking. Look  
through the door window to check the progress of baking  
whenever possible.  
Clock displaying broil (double oven)  
use the minute timers to time baking functions (see page 11).  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
ov e n op e r a t Io n  
broIlIng tIps:  
to operate the oven in standard broil or convection broil  
modes:  
1. always use a broiler pan and grill to provide drainage for  
excess fat and grease. Doing so will reduce spatter, smoke  
and flare-ups.  
1. Close the door tightly.  
2. Press the broIl or ConveCtIon broIl key.  
2. Pre-heat the broiler for 10 minutes prior to cooking.  
3. Press the TIME • TEMP + or TIME • TEMP – key and the  
default temperature setting “hI” will be displayed. “hI” is  
equivalent to 555˚F.  
3. Begin with a room temperature broiler pan for even cooking.  
4. use tongs or a spatula to turn and remove meats. Never  
pierce meat with a fork. the natural juices will escape.  
4. if a temperature other than “hI” is desired, press the tIme  
• TEMP – key to reduce the temperature. Six seconds after  
setting the temperature, the “on” indicator will light up in the  
clock display, the broiler element will begin heating.  
5. Broil food on the first side for slightly more than half of the  
recommended time, then season and turn. Season the  
second side just before removing.  
5. Dacor recommends that you set the minute timer(s) to time  
the broiling process (see page 11).  
6. to prevent sticking, lightly grease the broiler grill. Excess  
grease will result in heavy smoke. For easier cleaning,  
remove the broiler pan and grill when the food is removed.  
while the pan and grill are still warm, soak the pan and grill  
in a solution of hot water and dishwashing liquid, then scrub  
them with an abrasive pad.  
6. when the minute timer expires and/or the food is cooked,  
press the CANCEL • SECURE key to turn off the oven.  
the cooling fan will continue to run for 30 to 45 minutes  
depending upon the length and temperature of the broiling  
process.  
Common Baking Problems  
problem  
probable Cause  
CorreCtIon  
Cookies and biscuits burn on the bottom.  
oven door opened too often  
use door window to check food or set  
minute timer to shortest recommended  
time and check food when timer beeps.  
incorrect rack position being used. Pan too Change rack position. use Pure  
close to bake element.  
Convection mode.  
Standard bake or convection bake mode  
being used.  
use Pure Convection mode.  
Cookies and biscuits are too brown on top. Rack position being used is too high.  
Change rack position.  
Food was placed in the oven during  
pre-heat.  
wait until oven is pre-heated  
Cakes burn on the sides or are not done in oven was too hot.  
Reduce temperature.  
center.  
Cakes crack on top.  
Cakes are not level.  
oven temperature was too high.  
oven and/or oven rack was not level.  
oven was too hot.  
Reduce temperature.  
Level oven and rack as needed.  
Reduce temperature.  
Pies burn around edges or are not done  
in center.  
Dark, heat absorbing pan being used.  
oven was not hot enough.  
use shiny, reflective pans.  
increase oven temperature.  
Reduce number of pans.  
Pies are too light in color on top.  
oven and/or rack over crowded.  
Delay Timed Cooking  
warnIng  
Food safety is an important consideration when using delayed  
cooking modes. to avoid potential sickness and spoiling of food,  
take the following steps:  
this function allows the user to finish and/or start a cooking  
cycle automatically. it is especially useful for preparing meals in  
advance or cooking while you are at work or play. timed cooking  
can only be used with standard bake, Pure Convection and  
convection bake modes. timed cooking does not function in the  
broil modes.  
avoid using foods that will spoil while waiting for the  
cooking cycle to begin. typical foods to avoid include those  
containing eggs and dairy products, cream soups, and  
cooked or uncooked meats, poultry and fish.  
if cooking will not begin immediately, place only very cold  
or frozen food into the oven. Most unfrozen foods should  
never stand in the oven for more than two hours before  
cooking begins.  
Important:  
CooK tImE refers to the length of the cooking cycle. it does  
not refer to the start time.  
the time required to pre-heat the oven must be included in  
the CooK tIme. allow for about 8 to 12 minutes pre-heat  
time depending upon the temperature setting. the top  
element does not come on to pre-heat in the delay mode, so  
you will not pre-maturely brown foods.  
Do not allow foods to remain in the oven more than one  
hour after completion of the cooking cycle. when the  
temperature drops below 140˚, bacteria can develop.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
ov e n op e r a t Io n  
Delay Timed Cooking (Continued) Using the Meat Probe  
to begin cooking immediately and turn off at the desired  
time:  
For many foods, especially roasts and poultry, internal food  
temperature is the best test for properly cooked food. the meat  
probe takes the guesswork out of roasting by cooking food to the  
exact temperature you desire.  
1. Position oven rack(s) at the proper height(s).  
2. Place the food onto the center of the oven rack(s).  
3. Select the desired cooking mode and temperature.  
Important things to know about the meat probe:  
Double oven models have a meat probe connector in the  
upper oven only.  
4. Press the CooK tIme key and “tIme” will appear in the  
clock display. Press the TIME • TEMP + key to set the length  
of time that the food will be cooked. the cook time can be set  
from 5 minutes to 11 hours, 50 minutes.  
if the internal temperature of the meat you are cooking is  
less than 55˚F, you need to wait to insert the meat probe for  
proper operation.  
Make sure the food is completely defrosted before inserting  
the meat probe to avoid breaking the probe.  
For fully defrosted meat: allow it to come to room temperature  
by leaving it out for at least 15 minutes, but no more than  
2 hours. Fully defrosted meat allowed to come to room  
temperature before cooking can improve cooking results for  
searing, roasting and meat cooked rare.  
For partially frozen meat: first fully defrost and follow the  
steps above.  
setting the oven for delay timed Cooking  
to avoid the possibility of burns, unplug the meat probe using  
hot pads.  
5. after the cook time has expired, the clock will beep  
three times, and “holdwill be displayed. if cooking in a  
convection mode, the convection fan will also turn off at  
this time. while in hold mode, the oven temperature will be  
maintained at 150˚F for a period of two hours. Hold mode can  
be cancelled by pressing the CANCEL • SECURE key. the  
cooling fan will continue to run depending upon the length  
and temperature of the cooking process.  
to prevent damage, use the handles of the meat probe and  
plug to insert and remove them from the food and connector.  
Do not use tongs to pull on the cable when removing the  
probe.  
Never leave the meat probe inside the oven when the oven is  
not in use and especially during self-clean mode.  
to prevent damage to the oven, do not use probes other than  
the one provided with your wall oven.  
to start at a later time and finish at the desired time:  
1. Follow steps 1 thru 4 in the previous instructions for timed  
cooking.  
probe placement:  
1. Lay the probe on the outside of the meat along the top or  
side and mark with your finger where the edge of the meat  
comes to the probe. the point should rest in the center of the  
thickest meaty part of the roast.  
2. Press the stop tIme key.  
3. “stop” will appear in the clock display. Press the TIME •  
temp + key to enter the time of day that you wish the oven  
to shut off. “delaywill appear on the display. the oven  
will calculate the correct start time. after the cook time has  
expired, the clock will beep three times, and “holdwill  
appear on the display. if cooking in a convection mode, the  
convection fan will also turn off at this time. while in hold  
mode, the oven temperature will be maintained at 150˚F for a  
period of two hours. Hold mode can be cancelled by pressing  
the CANCEL • SECURE key. the cooling fan will continue  
to run depending upon the length and temperature of the  
cooking process.  
Cable  
Probe  
Plug  
Handles  
meat probe  
note:  
2. insert the probe into the meat to the point marked by your  
finger. the probe should not touch the bone, fat, gristle or the  
bottom of the pan.  
For double ovens, both the upper and lower chambers can be  
set for delay timed cooking. However, both chambers must  
have the same cook times and stop times.  
For roasts with no bone, insert the probe into the side of  
the roast in the center. For bone-in ham or lamb, insert  
the probe into the center of the lowest large muscle or  
joint.  
Do not use foods containing baking powder or yeast in delay  
timed cooking mode. these foods will not rise properly.  
For dishes such as meat loaf or casseroles, insert the  
probe into the center of the dish. when cooking fish,  
insert the probe from just above the gill into the meatiest  
area, parallel to the backbone.  
insert the probe into the meatiest part of the inner thigh  
from below, and parallel to the leg of a whole turkey.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ov e n op e r a t Io n  
setting the oven when using the temperature probe:  
Dehydrating/Defrosting  
settings in Pure Convection mode.  
1. Pre-heat the oven to the desired temperature.  
the oven can be used to dehydrate or defrost foods at low heat  
2. insert the meat probe into the food. (See Probe Placement).  
3. after the oven cell has reached the desired temperature,  
follow these steps to dehydrate or defrost foods:  
place the food into the oven.  
1. Position oven rack(s) at the proper height(s).  
4. wearing an oven mitt, lift the meat probe connector cover  
in the oven and plug in the meat probe. the connector is  
located on the left inside oven wall near the front of the oven.  
Make sure the plug is pushed all the way in.  
2. Place the food onto the center of the oven rack. For  
dehydrating, prepare food as recommended then place food  
onto a drying rack.  
3. Press the pure ConveCtIon key.  
5. Close the oven door.  
4. Set the temperature to 135˚F, the minimum temperature that  
can be set. For dehydrating, a higher temperature setting  
may be required. Follow the recommended temperature for  
the type of food being prepared.  
6. Press the probe key. the display will flash “prb” and beep  
if the probe is not connected properly.  
7. adjust the temperature to the desired setting using the  
TIME • TEMPERATURE keys. a "jump-in" temperature of  
160˚ will appear when the TIME • TEMPERATURE key is  
first pressed. to change to a different temperature, press  
the TIME • TEMPERATURE key repeatedly until you reach  
the desired temperature. the temperature can be set from  
100-200˚F. See the chart below for the Minimum Safe Internal  
Temperatures for Various Foods.  
5. Dacor recommends that you set the minute timer(s) to time  
the process (see page 11).  
Using the Minute Timer  
the clock features two timers that may be used to time cooking or  
other processes up to 11 hours 50 minutes in length.  
8. after the temperature is set, the control panel temperature  
readout will default to 95˚F, even if the food has not reached  
that temperature. the temperature readout will increase in  
1˚F increments until the food reaches the set temperature.  
to use the minute timer:  
1. Press the key labeled tImer 1, or tImer 2. the clock will  
display “00:00”, and “tImer 1” or “tImer 2” will flash.  
9. the oven will go into hold mode for 2 hours after the internal  
temperature of the food has reached the desired temperature  
and will hold the oven temperature at 150˚F. The residual  
heat of the oven will cause the internal temperature of the  
food to continue to climb. use hot pads to remove the meat  
probe from the food.  
2. Press the + key repeatedly until the desired time is displayed  
on the clock.  
3. after tImer 1 has expired, the clock will sound off with one  
second beeps and “tImer 1” will appear in the display.  
after the tImer 2 minute timer has expired, the clock will  
sound alternating one and two second beeps and “tImer  
2” will appear in the display. the beeper can be silenced by  
pressing the tImer key while the beeper is sounding.  
notes:  
after meat is pulled out of the oven, it will continue to cook.  
Carry-over cooking affects all foods. the larger the item, the  
longer the carry-over. it is best to let the meat rest after it  
comes out of the oven for 10 to 15 minutes. Doing so allows  
meat to retain its juices and continue to set, making it easier  
to carve.  
Important: Cancellation of the minute timer does not turn off  
the oven if it is operating. You must manually shut the oven off  
by pressing the CANCEL • SECURE key. (See the Delay Timed  
Cooking section for automatic oven turn on and turn off.)  
notes:  
if the probe is left attached to the connector when not in use,  
the control panel will beep and flash "prb" until the probe  
is unplugged. unplugging the probe from the oven turns the  
oven off.  
1. to view the current time of day rather than the minute timer  
display, press the CloCK key. to change back to a minute  
timer display, press the tImer 1 or tImer 2 key.  
2. to cancel the minute timer while in progress, press the  
tImer 1 or tImer 2 key twice. the clock display will return  
to the time of day.  
minimum safe Internal temperatures for various foods  
Internal  
type and Cut  
temp.  
3. the minute timers may be used at the same time as delay  
timed cooking or self-clean.  
Pork, ham, sausage and bacon  
180˚F  
4. the minute timers will beep for 2 minutes (if not cancelled)  
all foods previously served and cooled that are  
165˚F*  
before automatically shutting off.  
reheated  
all poultry and game birds (turkey, chicken, cornish  
game hen, duck, etc.)  
180˚F  
5. Pressing the CANCEL • SECURE key when the beeper  
is sounding will cancel both the beeper and the cooking  
function.  
Stuffed meats  
Stuffing  
165˚F  
165˚F  
165˚F  
Fish and most other potentially hazardous food not  
listed in this table  
Beef steaks (rare)  
Beef roasts (rare)  
145˚F  
145˚F  
* Within two hours  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ca r e a n d cl e a n In g  
warnIng  
to avoid electrical shock or burns, turn off all controls and  
ensure the oven is cool before cleaning.  
Do not use harsh or abrasive cleaning agents, waxes,  
polishes or commercial oven cleaners to clean the oven.  
Do not use commercial oven cleaners inside the oven. use  
of these cleaners can produce hazardous fumes or can  
permanently damage the porcelain finishes.  
Porcelain Surfaces  
the oven interior and inner door liners are finished in  
porcelain enamel. Clean these surfaces with a solution of  
mild detergent and hot water. Rinse and dry with a soft cloth.  
do not use abrasives or commercial oven cleaners.  
always remove excess grease and soil from the oven interior  
and door prior to using the self-cleaning cycle.  
Read and follow these Care and Cleaning instructions completely  
to maintain proper oven operation and appearance throughout  
the life of the product. Several materials and finishes are used  
in the oven. Each material and finish must be properly cleaned  
according to the following recommendations. Failure to follow  
these recommendations may result in permanent damage to the  
oven.  
Brass, Chrome and Copper  
Surfaces  
Clean these surfaces with a solution of mild detergent and  
warm water. Rinse, dry and polish with a soft, lint-free cloth.  
Brass, chrome, and copper finishes are protected with a clear  
coat enamel and should not be cleaned with metal polishes.  
Control Panel  
Broiler Pan and Grill  
to avoid accidentally turning the oven on while cleaning the  
control panel, activate the secure feature. Press and hold the  
CANCEL • SECURE key for approximately three seconds.  
this will disable the control panel and allow cleaning the  
controls without accidentally starting any functions. “off”  
will appear in the display when the control panel has been  
secured.  
the oven broiler pan and grill are finished in porcelain  
enamel. Clean both components in a solution of detergent  
and hot water. For heavy soil conditions, use a scouring  
pad such as steel wool with plenty of water. Rinse well after  
cleaning.  
Oven Racks  
to re-activate the control panel, again push and hold the  
CANCEL • SECURE key for three seconds. “off” will  
disappear from the display.  
the oven racks are chrome-plated. For everyday cleaning,  
apply a solution of detergent and hot water. to clean heavy  
soil, use a scouring pad such as steel wool with plenty of  
water, or use a solution of 1 cup ammonia to 2 gallons of  
water. Remove the racks during self-cleaning. if the racks  
are left in the oven during self-cleaning, they will permanently  
discolor.  
Clean the control panel with a solution of mild detergent  
and warm water. Do Not uSE aBRaSivE CLEaNERS oR  
SCRuBBERS. tHEY wiLL PERMaNENtLY DaMaGE tHE  
FiNiSH. Dry the control panel completely with a soft, lint-free  
cloth.  
Convection Filter  
Door Handle/Control Housing  
Clean the door handle and control panel housing with a  
solution of mild detergent and hot water. Rinse and dry with  
a soft cloth. Do Not uSE aBRaSivE CLEaNERS oR  
SCRuBBERS. tHEY wiLL PERMaNENtLY DaMaGE tHE  
FiNiSH.  
warnIng  
Remove the filter only when it is cool.  
Remove the filter during self-cleaning. if the filter is left in  
the oven during self-cleaning it will permanently discolor.  
Re-install the filter before cooking in the oven again. Failure  
to do so will expose the convection fan blade that rotates at  
high speed during convection modes.  
Door Glass  
Clean all glass surfaces with a solution of mild detergent and  
hot water. use a mild glass cleaner to remove fingerprints or  
smears. Dry completely with a soft, lint-free cloth.  
the convection filter is made of stainless steel. Remove the  
filter regularly for cleaning. a clogged filter will reduce the  
effectiveness of the convection cooking modes.  
Stainless Steel Surfaces  
on stainless steel ovens, the control panel, door(s) and  
exhaust grill are covered with stainless steel panels. Clean  
these surfaces with a solution of mild detergent and warm  
water. Rinse and dry with a soft, lint-free cloth.  
Important:  
if commercially available stainless steel cleaners are used,  
it is important to read the labels for chlorine compounds.  
Chlorine is a corrosive substance. if these compounds are  
present, rinse thoroughly and dry with a soft, lint-free cloth.  
always wipe stainless steel surfaces with the grain.  
Convection filter removal  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ca r e a n d cl e a n In g  
2. Remove the broiler pan and grill, all cookware, utensils and  
Soak the filter in hot soapy water.  
other loose items from the oven chamber. also, remove all  
oven racks and the convection fan filter to prevent them from  
permanently discoloring. However, to clean stubborn particles  
in the convection filter you may elect to simply leave it in  
place during self-clean. the filter will discolor due to the high  
heat, but the filtering capabilities will not be affected.  
Dry the filter completely before re-installing.  
to re-install the filter, orient the two mounting tabs towards  
the rear, open end down. Hook the two mounting tabs over  
the center horizontal bar.  
3. wipe up excess grease and other food spills with a damp  
cloth. this will minimize smoke and increase the efficiency of  
the self-clean cycle.  
4. turn on kitchen fans or vents to help remove odors during the  
process.  
Important:  
if racks are left in the oven during a self-clean cycle, it will affect  
their ability to slide in and out easily. if damage occurs, polish  
the rack edges with a soapy steel wool pad, then apply a small  
amount of vegetable oil to the edges so that the racks will slide  
more easily.  
to start the self-Clean Cycle:  
Convection filter Installation  
1. Close the oven door completely.  
2. Press the self-Clean key. the oven will beep once,  
“Clean” will flash, and “– –:– –” will be displayed.  
Self-Cleaning  
3. Press the TIME • TEMP + key and the default time of “2:00”  
hours will be displayed.  
warnIng  
1. Do Not oPERatE tHE ovEN LiGHtS iN tHE  
SELF-CLEaN MoDE.  
4. increase the self-clean time up to 4 hours (depending upon  
the amount of oven soil) by holding the TIME • TEMP + key.  
2. Do not touch the outside surfaces of the oven during the  
self-clean cycle.  
5. to delay the self-clean start to a more convenient time, press  
the stop tIme key. then, press the TIME • TEMP + key  
to set the time of day for the cycle to be complete. “delay  
tImed” will appear in the clock display. the cycle can be  
delayed up to 11 hours and 50 minutes.  
the oven features an automatic pyrolytic self-cleaning cycle  
to eliminate the need for difficult and time-consuming manual  
scrubbing of interior surfaces. During this cycle, the oven reaches  
temperatures of 850˚F to burn off soil and deposits. A powder ash  
residue is left in the bottom of the oven after completion of the  
self-clean cycle.  
6. approximately 30 to 60 seconds after selecting self-clean, the  
automatic door latch will lock the door. “loCK” and “on”  
will appear in the clock display. the oven will begin heating.  
the “on” indicator will cycle on and off with the burner.  
the self-clean time is variable from 2 to 4 hours to offer flexibility  
in handling various soil conditions. a 2-hour cycle normally  
handles a moderately soiled oven, whereas a 4-hour cycle is  
recommended for heavy soil. the self-clean cycle can also be  
delayed to start at a later time if desired.  
note:  
if delay timed mode has been set, the “on” display and the oven  
heat will not turn on until the programmed time has been reached.  
Important:  
Important:  
the electric  
door latch is  
a convenient  
safety feature  
that keeps the  
door locked when  
the interior is too  
hot. if the door  
is not closed  
it is normal for some smoke to be emitted during the first few  
self-clean cycles.  
Popping sounds are normal during self-clean. these sounds  
are caused by the expansion and contraction of metal  
surfaces during heat-up and cool-down.  
Do not line the oven with aluminum foil or other materials.  
these items can melt or burn during a self-clean cycle,  
causing permanent damage to the oven.  
display - self-Cleaning mode  
completely, the automatic door latch will not lock the door when  
the self-clean is selected. in this case, “Door” will flash in the  
display, Press the CANCEL • SECURE key and wait about 1  
minute. Repeat the self-clean steps from the beginning, being  
certain to close the door completely. Do not try to force the door  
open after it is locked, because damage can occur. if you need to  
unlock the door, press the CANCEL • SECURE key to turn off the  
self-clean cycle. after about 1 minute, “loCK” will disappear from  
the clock display, and the door will unlock. the door will remain  
locked until the oven temperature falls below 390˚F.  
to prepare the oven for self-Cleaning:  
1. Clean soil from the oven front frame area and the oven door  
outside of the door gasket. Do not clean the door gasket.  
Cleaning the door gasket by hand can cause it to bend or  
move. a tight door seal is essential for proper baking and  
self-cleaning. Rinse surfaces well with a solution of vinegar  
and water, then wipe dry. Heavily soiled areas may be  
cleaned with a non-scratching scouring pad.  
Continued...  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ca r e a n d cl e a n In g  
Self-Cleaning (Continued)  
Adjusting the Oven Temperature  
7. about 50 to 60 minutes is required for the oven to reach the  
Important:  
self-clean temperature of 850˚F.  
You may find the temperature in their new oven to be different  
from that of their previously-owned appliance. Familiarity with the  
old appliance sometimes makes it difficult to get used to a new  
oven. if you feel that the oven temperature is consistently high  
or low, the temperature of the new oven can be calibrated. the  
calibration needs to be done only once.  
8. the self-clean cycle can be stopped at any time by pressing  
CANCEL • SECURE.  
9. after completion of the self-clean cycle, the oven will stop  
heating and the “on” and “Clean” indicators will disappear  
from the clock display. Press the CANCEL • SECURE key.  
to calibrate the oven temperature:  
1. Press the baKe key.  
10. After the interior oven temperature falls below 390˚F, the door  
latch will release and “loCK” will disappear from the display.  
the door can be opened. Do not select any cooking function  
until the oven door is unlocked.  
2. Press the TIME • TEMP + pad to set a temperature of 500˚F  
or higher.  
11. open the door. after ensuring that the oven has cooled  
sufficiently to be safe, use a damp cloth or sponge to wipe  
out the powder residue found in the bottom of the oven.  
if white spots remain in the oven, remove them with a  
non-scratch scouring pad before using the oven again.  
these spots are normally salt that cannot be removed by the  
self-clean cycle.  
3. Press and hold the baKe key. after approximately 5 seconds  
the temperature display is replaced by “00”. the baKe key  
can be released. the calibration mode has been accessed.  
12. Re-install the oven racks and convection filter before cooking  
in the oven.  
self-Cleaning tips:  
if any soil remains in the oven after completion of a self-clean  
cycle, repeat the cycle if desired. increase the cleaning time  
during future cycles.  
TIMER 1  
CLOCK  
STOP TIME  
TIMER 2  
display when Calibrating the oven  
Clean the oven regularly to prevent excessive soil build-up.  
Doing so will increase the efficiency of the self-clean cycle  
and reduce the amount of smoke and odors generated.  
4. Press the TIME • TEMP + or TIME • TEMP – key to set  
the amount of temperature adjustment. the temperature  
can be changed a maximum of 35˚F higher or lower. Set  
the adjustment to positive (+) numbers to increase the oven  
temperature; set the adjustment to negative (–) numbers to  
reduce the oven temperature. temperatures can be adjusted  
in increments of 5˚F.  
Self-clean in the cooler evening hours after cooking is  
complete and when electricity rates are lower.  
on double oven models, if one oven is in the self-clean mode  
the other oven is inoperable.  
5. after setting the desired temperature adjustment, press the  
CANCEL • SECURE key to exit the calibration mode and to  
reset the clock display.  
note:  
1. if the CANCEL • SECURE key is not pressed after setting  
the adjustment, the clock display will automatically reset in 6  
seconds.  
2. the amount of temperature adjustment may be changed  
again by repeating the calibration procedure. the oven will  
only retain the most recent temperature adjustment.  
3. the temperature adjustment is not affected by an electrical  
power failure  
4. the temperature adjustment only affects standard bake and  
convection bake modes. Broil and self-clean temperatures  
cannot be adjusted.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ca r e a n d cl e a n In g  
Replacing the Oven Light  
warnIng  
to prevent electrical shock and/or personal injury:  
Accessories  
for accessories call your local dacor dealer or visit  
www.everythingdacor.com.  
accessory Cookie sheets (3 in a carton): these Full sized cookie  
sheets maximize oven rack baking capabilities by allowing the  
total usable rack area.  
Make certain that the appliance and light bulb are cool and  
that power to the appliance has been turned off before  
replacing the light bulb.  
always ensure that the lens cover is in place when using  
the appliance. the lens cover protects the bulb from  
breakage caused by high temperatures or mechanical  
shock.  
27” oven - Model No. aCS273  
30” oven - Model No. aCS303  
36” oven - Model No. aCS363  
replacement oven light bulb  
the light assembly consists of a removable lens cover and  
10-watt 12 vac halogen bulb, as well as a light fixture housing.  
Light bulb replacement is considered to be a homeowner  
maintenance operation.  
Part No. 86364  
stainless steel Cleaner  
Part No. a302  
to replace a light bulb, follow these steps:  
1. turn off the power at the main power supply.  
2. Remove the lens cover from the housing by pulling straight  
out.  
note:  
in some cases the lens cover may be tightly in place and require  
removal using the included lens pry stick. the pry stick should be  
used with caution. Do not cause uneven stress on the lens cover.  
Gently insert the pointed end of the pry stick under the center  
edge of the lens cover on the side facing the oven door. Hold your  
hand under the lens for support then pry out to remove the lens  
cover.  
3. Pull the light bulb out and replace it with a special 10-watt  
halogen bulb rated for use in a self-cleaning oven. use Dacor  
Part No. 86364 available from any authorized Dacor parts  
distributor or dealer.  
4. Reinstall the lens cover by aligning the cover over the  
opening and gently pressing it into its original position.  
Important: Make sure the cutout in the lens is lined up  
with the socket to prevent damage to the light fixture.  
5. turn the power back on at the main power supply.  
light socket  
oven light assembly  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Be f o r e yo u ca l l fo r Se r v Ic e  
Problem Solution Guide  
unnecessary service calls may be expensive, frustrating and time-consuming. Before you call for service, please review the potential  
problems, possible causes and remedies shown below. also, see the facing page for various oven failure codes that can be displayed  
on the control panel. Failure codes will appear where the temperature is normally displayed on the control panel.  
problem  
possIble Cause  
possIble solutIon  
Nothing works.  
oven is not connected to electrical power. Have oven connected to a properly sized  
electrical power supply by a qualified  
electrician.  
Power supply is not energized.  
oven settings are not correct.  
oven is set for delay-timed cooking.  
time of day is not set.  
Check for tripped circuit breaker or blown  
fuse. Have an electrician check power  
supply.  
oven will not heat.  
Follow mode selection and clock settings  
as specified in OVEN OPERATION  
section.  
oven will turn on automatically at time set.  
if desired, press CANCEL • SECURE key  
to cancel out of delay timed cooking.  
Clock displays incorrect time of day.  
Foods over-cook.  
Press CloCK touch pad, then press  
TIME • TEMP + or TIME • TEMP - key to  
set correct time of day.  
Power supply has been interrupted.  
Reset time of day.  
incorrect cooking time, temperature or rack adjust temperature or time settings.  
position being used.  
oven temperature calibration differs from  
your previous oven.  
Calibrate temperature according to  
Adjusting the Oven Temperature  
section (see Care and Cleaning).  
Foods under-cook.  
incorrect cooking time, temperature or rack adjust temperature or time settings.  
position being used.  
oven temperature calibration differs from  
your previous oven.  
Calibrate temperature according to  
Adjusting the Oven Temperature  
section (see Care and Cleaning).  
oven does not self-clean.  
Door is not shut tight so automatic door  
latch will not lock.  
Close door tightly.  
oven settings are not correct.  
Follow mode selection and clock settings  
as specified in the Self-Cleaning section  
(see Care and Cleaning).  
oven is set for delay timed cleaning.  
oven will turn on automatically at time set.  
if desired, press CANCEL • SECURE key  
to cancel out delay-timed cleaning.  
oven light will not work.  
Light bulb is burned out.  
Follow Replacing the Oven Light section  
(see Care and Cleaning).  
Door will not open.  
oven is in self-clean mode.  
if oven is hot, door latch will release  
automatically when oven temperature falls  
below 390˚F at end of cycle.  
if self-Clean was just selected and  
the oven is still cool, press CANCEL •  
seCure key to turn off self-clean. the  
door will open in about 30 seconds.  
oven is set to self-clean in delay-timed  
mode.  
oven will turn on automatically at time set.  
if desired, press CANCEL • SECURE key  
to cancel out of delay-timed mode.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Be f o r e yo u ca l l fo r Se r v Ic e  
Important:  
if a failure code is displayed, the oven will beep continuously until the user presses the CANCEL • SECURE key. the oven will not heat  
after a failure code is displayed. Call a qualified appliance technician to repair the oven.  
Clock display Cause  
F0.  
F1.  
F2.  
touch pad is stuck in depressed position.  
Relay circuit failure.  
oven temperature exceeded the clean runaway temperature (self-clean mode only)  
or the cooking runaway temperature (cooking modes only).  
F3.  
F4.  
F6.  
F7  
Short circuit in the oven temperature sensor.  
open circuit in the oven temperature sensor.  
Failure in the EEPRoM check comparison. (only time of day and timer will operate.)  
Failure of the self-clean automatic door latch circuit.  
F8.  
Failure of the door latch motor. occurs when the motor runs for two minutes without  
the door locking in self-clean mode.  
oven failure Codes  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Se r v Ic e a n d pr o d u c t Wa r r a n t y  
Product Maintenance  
What Is Not Covered  
No maintenance, other than that in the CARE AND CLEANING  
section of this use and care manual, should be attempted by  
the owner/operator. all other maintenance and service must be  
performed by a qualified appliance technician.  
Failure of the product caused by faulty installation, improper  
usage, or neglect of required maintenance.  
Service calls to educate the customer in the proper use and  
care of the product.  
Failure of the product when used for commercial, business,  
rental or any application other than for residential consumer  
use.  
If You Need Service...  
First, review the recommended checks listed in the preceding  
Before You Call for Service section. then, be certain that the  
appliance has been installed properly and is being operated  
correctly. Familiarize yourself with the warranty terms and  
conditions listed in this section.  
Replacement of house fuses or fuse boxes, or resetting of  
circuit breakers.  
Damage to the product caused by accident, fire, flood or  
other acts of God.  
if the above mentioned checks have been completed and the  
problem has not yet been remedied, call your local authorized  
DaCoR service representative. Your dealer can normally provide  
the name and telephone number of the nearest service company.  
Breakage, discoloration or damage to glass, metal surfaces,  
plastic components, trim, paint, porcelain or other cosmetic  
finish, caused by improper usage or care, abuse, or neglect.  
tHE REMEDiES PRoviDED FoR tHE aBovE EXPRESS  
waRRaNtiES aRE tHE SoLE aND EXCLuSivE REMEDiES.  
tHEREFoRE, No otHER EXPRESS waRRaNtiES aRE  
MaDE, aND outSiDE tHE FiFtY StatES oF tHE uNitED  
StatES aND tHE DiStRiCt oF CoLuMBia, aLL iMPLiED  
waRRaNtiES, iNCLuDiNG But Not LiMitED to, aNY  
iMPLiED waRRaNtY oF MERCHaNtaBiLitY oR FitNESS  
FoR a PaRtiCuLaR uSE oR PuRPoSE aRE LiMitED iN  
DuRatioN to oNE YEaR FRoM tHE DatE oF oRiGiNaL  
PuRCHaSE. iN No EvENt SHaLL DaCoR® BE LiaBLE FoR  
iNCiDENtaL EXPENSE oR CoNSEQuENtiaL DaMaGES. No  
waRRaNtiES, EXPRESSED oR iMPLiED, aRE MaDE to aNY  
BuYER FoR RESaLE.  
DACOR works diligently to ensure your satisfaction when service  
is necessary. However, if you are not completely satisfied with the  
service provided, contact the company that performed the service  
and express why you are not pleased. Normally, they will be  
willing and able to resolve the problem.  
If the service agency is not able to respond effectively, call or  
write the DACOR Customer Service Department. The phone  
number and address of this department are listed on the inside  
front cover of this manual. Please include your telephone number  
if you choose to write. We will then do our utmost to assure your  
happiness and satisfaction.  
What Is Covered  
CertIfICate of warrantIes  
daCor wall ovens  
Some states do not allow limitations on how long an implied  
warranty lasts or do not allow the exclusion or limitation of  
incidental or consequential damages, so the above limitations or  
exclusions may not apply to you. this warranty gives you specific  
legal rights, and you may also have other rights that vary from  
state to state.  
wIthIn the fIfty states of the u.s.a., the dIstrICt of  
ColumbIa and Canada*:  
FuLL oNE YEaR waRRaNtY  
if your DaCoR product fails to function within one year of  
the original date of purchase, due to a defect in material or  
workmanship, DaCoR will remedy the defect without charge  
to you or subsequent users. the owner must provide proof of  
purchase upon request and have the appliance accessible for  
service.  
* Warranty is null and void if non-CSA approved product is  
transported from the u.S.  
outsIde the fIfty states of the u.s.a., the dIstrICt  
of ColumbIa and Canada:  
LiMitED FiRSt YEaR waRRaNtY  
if your DaCoR product fails to function within one year of  
the original date of purchase, due to a defect in material or  
workmanship, DaCoR will furnish a new part, F.o.B. factory,  
to replace the defective part. all delivery, installation and labor  
costs are the responsibility of the purchaser. the owner must  
provide proof of purchase upon request and have the appliance  
accessible for service.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
no t e S  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
no t e S  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
fold here  
NO POSTAGE  
NECESSARY  
IF MAILED  
IN THE  
UNITED STATES  
BUSINESS REPLY MAIL  
POSTAGE WILL BE PAID BY ADDRESSEE  
FIRST-CLASS MAIL  
PERMIT NO. 4507  
DIAMOND BAR CA  
DACOR INC.  
ATTN: WARRANTY PROCESSING DEPT  
1440 BRIDGE GATE DR STE 200  
PO BOX 6532  
DIAMOND BAR CA 91765-9861  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARRANTY INFORMATION  
IMPORTANT:  
Your warranty will not be activated until you activate it online or return this form to Dacor. If you have purchased more  
than one Dacor product, please return all forms in one envelope or activate the warranty for each product online.  
Please rest assured that under no conditions will Dacor sell your name or any of the information on this form for mailing list purposes. We  
are very grateful that you have chosen Dacor products for your home and do not consider the sale of such information to be a proper way  
of expressing our gratitude!  
Owner’s Name:  
Last (Please Print or Type)  
First  
Middle  
Street:  
City:  
State:  
Telephone:  
Zip:  
Zip:  
Purchase Date:  
Dealer:  
City:  
Email:  
State:  
Your willingness to take a few seconds to fill in the section below will be sincerely appreciated. Thank you.  
1. How were you first exposed to Dacor products? (Please check one only.)  
A. T.V. Cooking Show  
B. Magazine  
C. Appliance Dealer Showroom  
D. Kitchen Dealer Showroom  
E. Home Show  
F
Builder  
G. Architect/Designer  
H. Another Dacor Owner  
I. Model Home  
J. Other  
2. Where did you buy your Dacor appliances?  
A. Appliance Dealer  
B. Kitchen Dealer  
C. Builder Supplier  
D. Builder  
E. Other  
3. For what purpose was the product purchased?  
A. Replacement only  
B. Part of a Remodel  
C. New Home  
D. Other  
4. What is your household income?  
A. Under $75,000  
B. $75,000 – $100,000  
C. $100,000 – $150,000  
D. $150,000 – $200,000  
E. $200,000 – $250,000  
F. Over $250,000  
5. What other brands of appliances do you have in your kitchen?  
A. Cooktop  
B. Oven  
C. Dishwasher  
D. Refrigerator  
6. Would you buy or recommend another Dacor product?  
Yes  
No  
Comments:  
Thank you very much for your assistance. The information you have  
provided will be extremely valuable in helping us plan for the future  
and giving you the support you deserve.  
Place Serial Number Label Here  
Web site:  
Corporate phone:  
(800) 793-0093  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Edelbrock Automobile Parts 1580 User Manual
Elation Professional Baby Accessories PROTRON LED User Manual
Electro Voice Portable Speaker LS12A User Manual
Eton Clock Radio ego4000 User Manual
Extron electronic Network Card DDRX DVI User Manual
Fellowes Paper Shredder 200C 130C User Manual
GE Answering Machine 27851FE1 User Manual
GE Monogram Cooktop ZEU36K User Manual
Gianni Industries Door EM NH500 User Manual
Goodman Mfg Air Conditioner TSTAT GTS1175 User Manual