GE Monogram Dishwasher ZBD6890NII User Manual

ZBd6890NII  
GE Monogram® Fully Integrated Built-In dishwasher  
Dimensions and Specifications (in inches)  
Custom Panel for Model ZBD6890NII  
These dishwashers require a field installed 3/4” thick custom  
panel and custom handle. An installation template is  
packed with these models and may be obtained in advance.  
Order Pub. No. 31-30569-1. Complete panel installation  
instructions are included on the template.  
• The dishwasher must be installed so that the drain hose  
is no more than 10 feet in length for proper drainage.  
• Water and power supply should enter in the  
shaded area.  
• Electrical and water connections are at the right front  
of the dishwasher. The hot water line should extend  
forward 30" to 40" from the rear wall. The electrical  
must extend forward at least 24" to reach the junction  
box.  
CUSTOM PANEL SIZE REQUIREMENTS  
HEIGHT  
Panel height must  
be between  
30-1/16" and 30-1/4".  
• To prevent siphoning, an air gap must be used when  
the waste tee or disposer connection is less than 18"  
above the floor.  
• If the panel height is  
more than 30-1/4” it  
30-1/16" Min.  
30-1/4" Max.  
will prevent the door  
from swinging open.  
• If the panel height is  
less than 30-1/16” it  
will not cover the  
dishwasher door  
This Wall Area  
must be Free of  
23-3/4"  
Pipes or wires  
Cabinets  
24"  
34-1/2" Min.  
Underside of  
Countertop  
to Floor  
Square  
and  
5"  
5"  
Min.  
4"  
frame.  
4"  
• The top of the custom panel must be flush with the top  
of the door. The 1/2” minimum gap between the top  
of the door and the bottom of the countertop must be  
maintained.  
Plumb  
6"  
24" Min.  
34"  
Countertop  
Adjustable  
to 35"  
Floor MUST  
be Even with  
Room Floor  
WIDTH  
Panel width must be 23-3/4".  
1/2" min.  
• If the panel width is less than  
23-3/4” it will not cover the  
dishwasher frame.  
Minimum 1/2" gap  
for Clearance  
*24"  
24"  
*dishwasher models  
ZBd6890 and ZBd0700  
require a 3/4" thick  
custom panel and will be  
24-3/4" deep.  
IMPORTANT: To ensure  
optimum door balance  
performance, the custom panel must not weigh  
more than 14 lbs.  
Accessories for custom panel model ZBD6890  
ZPR0700S door panel provides a professional-style handle  
on a stainless steel door panel.  
ZTB700 stainless steel tubular handle for installation onto a  
custom panel.  
Electrical Requirements  
The dishwasher must be supplied with 120V, 60Hz, and  
connected to an individual properly grounded branch  
circuit protected by a 15- or 20-amp circuit breaker or  
time-delay fuse.  
Before installing refer to installation instructions for  
details. Pub. No. 31-30586  
For answers to your Monogram,® GE Profileor  
GE® appliance questions, visit our website at  
ge.com or call GE Answer Center® service,  
800.626.2000.  
As an EnErgy StAr®  
Listed by  
partner, gE has determined  
that this product meets the  
EnErgy StAr guidelines  
for energy efficiency.  
Underwriters  
Laboratories  
Specification Revised 2/08  
150043  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ZBd6890NII  
GE Monogram® Fully Integrated Built-In dishwasher  
Features and Benefits  
• Stainless Steel Interior  
• Hidden, Integrated Top Controls  
• Long door design  
• Powerful Forced-air drying System  
• CleanSensor Technology  
• Nylon upper and Lower Racks  
• NSF® Certified to Sanitize  
• ENERGy STAR® Qualified  
• Model ZBd6890NII – Requires custom panel  
Specification Revised 2/08  
150043  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Eiki Cassette Player 5190A User Manual
Field Controls Air Cleaner UV 18X User Manual
Fisher Paykel Humidifier MR480 User Manual
Fostex Recording Equipment VF80EX User Manual
Freestyle Watch Shark Thesher User Manual
Fujitsu Laptop T4310 User Manual
Fujitsu Printer DL1150 1250 User Manual
GE Microwave Oven 72166339 User Manual
Generac Automobile Parts MAX 12CV User Manual
Global Machinery Company Saw CS011A User Manual