ZDOD240PSS – GE Monogram Stainless Steel Outdoor/Indoor Refrigerator Module
Dimensions and Specifications (in inches)
Installation Space
Product Clearances
Locate Outlet
24"
Cabinet
10-1/2"
24" Min.
9"
Max.
34-1/2" Min.
1-1/2"
23-3/4" Min.
23-3/4"
110˚
Note: Handle and
handle standoff
depth is 2-3/4"
34-1/2"
15" Minimum
(36"with
top
All models are factory set for a 110° door swing.
26-1/2"
Including
Handle
canopy)
For a minimum 90° door swing:
• Allow 5-1/4" min. clearance to wall on the hinge side.
For a full 110° door swing:
23-3/4"
• Allow 15" min. clearance to wall on the hinge side.
Note: If installing between frameless cabinets, a 1/2" wide filler
strip or side panel may be required. The filler strip will act as a
spacer between the door case and adjacent cabinet and will prevent
interference with cabinet door swing. The width of the opening must
include filler panels.
Note: This product can be installed as a built-in or used free-standing.
The top canopy can be removed for installation below a countertop.
The cutout depth must be 24"
The cutout dimensions shown allows for a full door swing and access
to the pull-out racks when installed as a built-in.
• The outdoor/indoor refrigerator can be used freestanding.
• Stainless steel top canopy can be removed for built-in installation.
• Vented stainless steel toekick.
Additional Specifications:
• A 120 volt 60Hz., 15 or 20 amp power supply is required.
An individual property grounded branch circuit or circuit breaker
is recommended. Install a properly grounded 3-prong electrical
receptacle recessed into the back wall as shown. Electrical must
be located on rear wall as shown.
Listed by
Underwriters
Laboratories
Warning:
R
This product must be connected to a power source with Ground
Fault Circuit Interrupter (GFCI) protection when installed in an
outdoor location.
For answers to your Monogram, GE Profile™ or
GE® appliance questions, visit our website at
GEAppliances.com or call GE Answer Center®
service, 800.626.2000.
®
Specification Revised 7/05
120028
Download from Www.Somanuals.com. All Manuals Search And Download.
ZDOD240PSS – GE Monogram Stainless Steel Outdoor/Indoor Refrigerator Module
Features and Benefits
• Stainless steel outdoor design – Sturdy, professional
grade exterior stands up to the most demanding
environmental conditions
• Electronic adjustable temperature control –Offers a range
of temperatures for precise chilling
• LED temperature display – Allows you to monitor the
temperature at a glance
• Removable spillproof glass shelves – Helps contain spills
for ease of cleaning
• QuickSpace™ Shelf – Quickly slides out of the way to make
room for tall items
• Two beverage shelves on full-extension slides – Each
holds up to five wine bottles or ten 12-oz. cans
• Stainless steel removable canopy – Canopy protects the
top of the refrigerator in outdoor environments and can be
removed to allow built-in installation
• Stainless Steel – Conveys a look of utmost polish
and sophistication
• Professional-style handle – Coordinates with other
Monogram Professional cooking appliances
• Model ZDOD240PSS – Stainless steel
• Model ZDOD240PLSS – Stainless steel, left hinge
Specification Revised 7/05
120028
Download from Www.Somanuals.com. All Manuals Search And Download.
|