JGP328SEK
GE® 30" Built-In Gas Cooktop
Dimensions and Installation Information
21
AGA Requirement: All gas cooktop models require
7/16" free area below cooktop height to combustible
material. Requires 18" minimum from countertop to
adjacent overhead cabinets.
30
13" MAX.
depth
Cooktop
3-3/16
Note: If installing with a GE ProfileTM Telescopic
Downdraft System, consult both cooktop and
downdraft installation instructions packed with
product before installing. Cooktop gas/electric
supply may need to be re-routed to install
downdraft.
30" MIN. to
unprotected
cabinet
19-5/8
6" MIN.
clearance to
side wall
18" MIN.
to cabinet
28-1/2
2-1/4" to
rear wall
from cut-out
Electrical Rating: 120V, 60Hz, 5A
Installation With Single Wall Oven Information:
30" Gas Cooktops are approved for use over select
GE 27" and 30" Wall Ovens and Warming Drawers.
30" and 36" Gas cooktops are approved for use
over 30" Wall Ovens and Warming Drawers.
Refer to cooktop and wall oven/warming drawer
installation instructions packed with product for
current dimensional data.
2-1/2
(Min.)
3-3/4" MIN.
clearance to
side wall
Gas Connection
from cut-out
Electrical junction
box 12" MIN.
below countertop
Cut should
Installation Information: Before installing, consult
installation instructions, packed with product, for
current dimensional data.
45°
not interfere
with cabinet
structure at
front
Electrical
cord
Pressure
regulator
1/2" pipe
Coupling
Electrical
outlet
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Shut-off
valve
Dimension and installation information are shown in inches.
Specification Created 11/04
330322
Download from Www.Somanuals.com. All Manuals Search And Download.
|