GE Monogram®
Owner’s Manual
Chef’s Washer
ZBD6605
ZBD6905
ZBD7005
ZBD7105
monogram.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumer Information
Chef’s Washer
Read this manual carefully. It is intended
to help you operate and maintain your new
Chef’s Washer properly.
If you don’t understand something or need
more help, there is a list of toll-free consumer
service numbers included in the back section
of this manual.
Before
using
your
Chef’s
Washer
Keep it handy for answers to your questions.
OR
Visit our Website at: monogram.com
You can find the model and serial numbers
at the inside upper left tub flange.
Before sending in this card, please write these
numbers here:
Write
down the
model &
serial
Model Number
numbers
Serial Number
Use these numbers in any correspondence or
service calls concerning your Chef’s Washer.
Immediately contact the dealer (or builder)
that sold you the Chef’s Washer.
If you received
a damaged
Chef’s Washer
Before you request service, check the Problem
Solver in the back of this manual.
It lists causes of minor operating problems that
you can correct yourself.
Save time
& money
To obtain service, see the Consumer Services
page in the back of this manual.
For customers in Canada:
If you
need service
FIRST, contact the people who serviced your
appliance. Explain why you are not pleased.
In most cases, this will solve the problem.
We’re proud of our service and want you to be
pleased. If for some reason you are not happy
with the service you receive, here are steps to
follow for further help.
NEXT, if you are still not pleased, write all the
details–including your phone number–to:
For customers in the USA:
Manager, Consumer Relations
Camco Inc.
1 Factory Lane, Suite 310
Moncton, N.B. E1C 9M3
FIRST, contact the people who serviced your
appliance. Explain why you are not pleased.
In most cases, this will solve the problem.
NEXT, if you are still not pleased, write all the
details–including your phone number–to:
Manager, Customer Relations
GE Appliances
Appliance Park
Louisville, KY 40225
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
MESURES DE SÉCURITÉ IMPORTANTES
WARNING!
For your safety, the information in this manual
must be followed to minimize the risk of fire,
• Do not store or use combustible materials,
gasoline or other flammable vapors and liquids
in the vicinity of this or any other appliance.
• Do not allow children to play inside, on or with
this appliance or any discarded appliance.
explosion, electric shock, or to prevent property
damage, personal injury or loss of life.
• Do not tamper with controls.
• Do not abuse, sit on, or stand on the door or
dish rack of the Chef’s Washer.
• Do not discard a Chef’s Washer without first
removing the door or removing the door latch.
• Do not allow children to play around the Chef’s
Washer when opening and closing the door due
to possibility of small fingers being pinched in
the door.
AVERTISSEMENT
!
Pour votre sécurité, veuillez suivre à la lettre les
directives données dans le présent manuel afin
de réduire les risques d’incendie, d’explosion ou
de chocs électriques, et prévenir les dommages
matériels et les blessures graves ou mortelles.
• N’entreposez pas et n’utilisez pas d’essence,
de vapeurs ou de liquides inflammables à
proximité de cet appareil ou de tout autre
électroménager.
• Ne laissez pas les enfants jouer avec le lave-
vaisselle du chef ni monter dessus. Ne les
laissez pas s’introduire à l’intérieur de cet
appareil ou d’un vieil appareil qui ne sert plus.
• Ne modifiez pas le fonctionnement des
commandes.
• Ne montez pas ou ne vous assoyez pas sur la
porte ou les paniers du lave-vaisselle du chef,
et ne les utilisez pas de façon abusive.
• Ne jetez pas un lave-vaisselle du chef sans
en avoir d’abord enlevé la porte ou enlevez
le verrou de la porte.
•
Ne permettez jamais à des enfants de jouer
à proximité d’un lave-vaisselle du chef quand
vous ouvrez ou fermez la porte. Ils peuvent
se coincer les doigts dans la porte.
WARNING! RISK OF CHILD ENTRAPMENT
PROPER DISPOSAL OF THE CHEF’S WASHER
A junked or abandoned Chef’s Washer is
dangerous…even if it will sit for “just a
few days.” If you are getting rid of your old
Chef’s Washer, please follow the instructions
below to help prevent accidents.
Door latch
keeper
Before You Throw Away Your Old Chef’s Washer:
• Take off the door of the washing
compartment or remove the door latch
keeper (as shown).
AVERTISSEMENT! RISQUE D’ENFANT MIS AU PIÈGE
BONNE DISPOSITION DU LAVE-VAISSELLE DU CHEF
Le lave-vaisselle du chef abandonné ou jeté est
dangereux...même s’il est abandonné «juste
pendant quelques jours». Si vous jetez votre
vieux lave-vaisselle du chef, veuillez suivre les
instructions suivantes pour prévenir tout
accident.
Réceptacle
à verrou
Avant de jeter votre vieux lave-vaisselle du chef :
• Enlevez la porte du compartiment de lavage
ou enlevez le réceptacle à verrou (comme
l’indique l’illustration).
4
Download from Www.Somanuals.com. All Manuals Search And Download.
WATER HEATER SAFETY
Under certain conditions hydrogen gas may be
If the hot water has not been used for two
weeks or more, prevent the possibility of
damage or injury by turning on all hot water
faucets and allowing them to run for several
minutes. Do this before using any electrical
appliance which is connected to the hot water
system. This simple procedure will allow any
built-up hydrogen gas to escape. Since the gas
is flammable, do not smoke or use an open
flame or appliance during this process.
produced in a water heater that has not been
used for two weeks or more. HYDROGEN
GAS IS EXPLOSIVE.
SÉCURITÉ DU CHAUFFE-EAU
Dans certaines conditions, il peut se former de
l’hydrogène à l’intérieur d’un chauffe-eau qui
n’a pas servi pendant deux semaines ou plus.
L’HYDROGÈNE EST UN GAZ EXPLOSIF.
Pour réduire les risques de dommages ou de
blessures lorsque l’eau chaude n’a pas été
utilisée depuis deux semaines ou plus, ouvrez
tous les robinets d’eau chaude et laissez l’eau
couler pendant plusieurs minutes avant
d’utiliser un appareil électrique raccordé au
système d’eau chaude. Vous éliminerez ainsi
l’hydrogène qui pourrait s’y être accumulé.
Puisqu’il s’agit d’un gaz inflammable, ne fumez
pas ou n’utilisez pas une flamme nue au cours
de ce processus.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
MESURES DE SÉCURITÉ IMPORTANTES
PROPER INSTALLATION AND MAINTENANCE
This Chef’s Washer must be properly installed
and located in accordance with the Installation
Instructions before it is used. If you did not
receive an Installation Instructions sheet with
your Chef’s Washer, you can receive one by
• Dispose of discarded appliances and shipping
or packing material properly.
• Do not attempt to repair or replace any part
of your Chef’s Washer unless it is specifically
recommended in this manual. All other
servicing should be referred to a qualified
technician.
visiting our Website at monogram.com
.
• Connect to a grounded metal, permanent
wiring system; or run an equipment-
grounding conductor with the circuit
conductors and connect to the equipment-
grounding terminal or lead of the appliance.
• To minimize the possibility of electric shock,
disconnect this appliance from the power
supply before attempting any maintenance.
NOTE: Turning the Chef’s Washer off does
not disconnect the appliance from the power
supply. We recommend having a qualified
technician service your appliance.
• Improper connection of the equipment-
grounding conductor can result in a risk of
electric shock. Check with a qualified
electrician or service representative if you are
in doubt whether the appliance is properly
grounded.
INSTALLATION ET ENTRETIEN APPROPRIÉS
Avant de l’utiliser, vous devez installer
correctement ce lave-vaisselle du chef
conformément aux directives d’installation
fournies. Si vous n’avez pas reçu une feuille
de directives d’installation avec votre lave-
vaisselle du chef, vous pouvez en obtenir un
exemplaire par visiter notre site Web à l’adress
monogram.com.
• Jetez de la façon appropriée les vieux
électroménagers, ainsi que le matériel
d’emballage et d’expédition.
• Ne tentez pas de réparer ou de remplacer
toute pièce de votre lave-vaisselle du chef,
à moins que cela ne soit spécifiquement
recommandé dans le présent manuel. Confiez
toutes les autres réparations à un réparateur
qualifié.
• Cet appareil doit être relié à un système de
câblage électrique permanent, mis à la terre.
Sinon, un fil de mise à la terre pour
appareillage doit être installé et raccordé à la
borne ou au fil de mise à la terre de l’appareil.
• Afin de réduire les risques de chocs électriques,
débranchez toujours l’appareil avant de le
réparer. REMARQUE : Lorsque vous mettez
la commande du lave-vaisselle du chef à OFF
(arrêt), le courant qui alimente l’appareil n’est
pas coupé. Nous vous recommandons de
confier la réparation de votre appareil à un
réparateur qualifié.
• Un raccordement non approprié du fil
de mise à la terre pour appareillage peut
présenter des risques de chocs électriques.
Si vous doutez de la qualité de la mise à la
terre de votre électroménager, consultez un
représentant du Service après-vente ou un
électricien qualifié.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
WHEN USING YOUR CHEF’S WASHER
Use this appliance only for its intended
• Non-Dishware Items: Do not wash items such
as electronic air cleaner filters, furnace filters
and paint brushes in your Chef’s Washer.
Damage to Chef’s Washer and discoloration
or staining of Chef’s Washer may result.
purpose as described in this Owner’s Manual.
CAUTION:
Contents washed
in the Sanitization cycle may be hot to the
touch. Use care before unloading.
• Do not touch the heating element during
or immediately after use.
• Use only powder, tabs or liquid detergents
or wetting agents recommended for use in
a Chef’s Washer and keep them out of the
reach of children.
• Do not operate your Chef’s Washer unless
all enclosure panels are properly in place.
• Close supervision is necessary if this
appliance is used by or near children.
• Locate sharp items so that they are not
likely to damage the door seal.
• Load light plastic items so they will not
become dislodged and drop to the bottom
of the Chef’s Washer–they might come into
contact with the heating element and
be damaged.
• Load sharp knives with the handles up
to reduce the risk of cut-type injuries.
• Do not wash cookware unless marked
dishwasher safe or the equivalent. For
plastic items not so marked, check the
manufacturer’s recommendations.
READ AND FOLLOW THIS SAFETY
INFORMATION CAREFULLY.
SAVE THESE INSTRUCTIONS
LORSQUE VOUS UTILISEZ VOTRE LAVE-VAISSELLE DU CHEF
N’utilisez ce lave-vaisselle du chef que pour
l’usage auquel il est destiné, comme expliqué
dans le présent Manuel d’utilisation.
ne portent aucune mention, lisez les
recommandations du fabricant.
• Articles divers : Ne lavez pas des articles comme
les filtres à air électroniques, les filtres de
fournaise et les pinceaux dans votre lave-vaisselle
du chef. Ils pourraient endommager le lave-
vaisselle du chef et décolorer ou tacher la cuve.
MISE EN GARDE :
Les
matériaux lavés selon le cycle Sanitization
peuvent être chauds. Faites attention quand
vous videz votre machine.
• Ne touchez pas à l’élément chauffant pendant
ou immédiatement après le lavage.
• N’utilisez que des détergents liquides, en
poudre ou en pastilles et les produits de rinçage
recommandés pour lave-vaisselle du chef. Gardez
tous ces produits hors de portée des enfants.
• Ne faites pas fonctionner votre lave-vaisselle du
chef lorsque l’un de ses panneaux est enlevé.
• Il faut exercer une étroite surveillance lorsque
vous faites fonctionner le lave-vaisselle du chef
en présence d’enfants.
• Placez les articles aiguisés de manière à ce qu’ils
n’endommagent pas le joint de la porte.
• Placez les couteaux les poignées vers le haut afin
de réduire les risques de coupures.
• Placez les articles légers en plastique de façon
qu’ils ne bougent pas ou ne tombent au fond de
l’appareil pendant le lavage. Ils pourraient être
endommagés s’ils entrent en contact avec
l’élément chauffant.
• Ne lavez pas d’articles en plastique dans le
lave-vaisselle du chef, à moins qu’ils portent la
mention lavable au lave-vaisselle ou toute mention
équivalente. Lorsque les articles de plastique
VEUILLEZ LIRE ET SUIVRE À LA LETTRE
CES MESURES DE SÉCURITÉ.
CONSERVEZ CES DIRECTIVES
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Panel – ZBD6605
Chef’s Washer
You can locate
your model
ZBD6605
number on the
inside upper
tub flange.
Throughout this
manual, features
and appearance
may vary from
your model.
1
2
1. WASH CYCLES Knob–Use to select the desired wash cycle based on dishware and soil level.
Control
Settings
HEAVY DUTY
For pans or cookware with dried-on or baked-on soils.
This cycle may not remove some burned-on foods.
NORMAL WASH For loads of everyday cookware with medium soils. NOTE: For heavily
soiled cookware, choose NORMAL WASH plus HIGH TEMP water
temperature option.
LIGHT WASH
SPEED WASH
RINSE ONLY
For lightly soiled cookware.
For recently used, lightly soiled cookware to be washed in a short time.
Provides a wash with temperatures of up to 125°F (51°C).
For rinsing partial loads that will be washed later. Do not use detergent
with this cycle.
2. HEAT OPTIONS Knob–Used to select water temperature and drying options.
NORMAL
Provides a wash and rinse with water temperatures up to 125°F (51°C) in
LIGHT WASH, 135°F (57°C) in the NORMAL WASH cycle and 155°F (68°C)
in HEAVY DUTY.
HIGH TEMP.
SANITIZE
Provides a wash and rinse with water temperatures up to 160°F (71°C)
in LIGHT WASH, NORMAL WASH and HEAVY DUTY. Not available
for SPEED WASH, LIGHT WASH or RINSE ONLY cycles.
Provides a sanitizing wash and rinse with water temperatures up to 160°F
(71°C) in LIGHT WASH and 171°F (77°C) in NORMAL WASH and
HEAVY DUTY. Not available for SPEED WASH or RINSE ONLY cycles.
At the end of the cycle, the HEAT OPTIONS light will illuminate to
indicate that the sanitization conditions have been met.
E
NSF INTERNATIONAL
Meets NSF Protocol for Performance of Domestic Spray-Type Pots
and Pans Washing Machines (NSF Protocol P180) Requirements
for cleaning and sanitization of cookware.
HEAT DRY
When selected, turns the drying heater on for fast drying. The option will
extend the cycle by 30 minutes. When this option is NOT selected, the fan
will turn on to dry your dishes without added heat–energy is saved.
HEAT DRY is not available on RINSE ONLY.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation – ZBD6605
Chef’s Washer
To start the Chef’s Washer, close the door until it locks in place. To start the last selected cycles,
press the START button. To select a different cycle, turn the knobs to the desired WASH CYCLE
and HEAT OPTIONS and press the START button.
Start a
wash load
NOTE: Not all heat options are available for all cycles. If a combination that is not available is
selected, the lights will flash when the START button is pressed, and the cycle will not start.
HEAT OPTIONS
NORMAL
& HEAT
DRY
HIGH
SANITIZE
(includes
HIGH
TEMP
TEMP &
Wash Cycles
NORMAL
HEAT DRY HEAT DRY)
✓
✓
HEAVY DUTY
✓
✓
✓
✓
✓
—
✓
✓
✓
✓
NORMAL WASH
LIGHT WASH
SPEED WASH
RINSE ONLY
✓
✓
✓
✓
✓
✓
✓
—
—
—
—
—
—
To interrupt/pause a cycle, gently open the door just enough to turn off the wash motor. Do not
fully open the door until the wash action ceases.
CAUTION: Be careful when opening the door; the hot steam that escapes when the door is
opened may cause injuries. Stand back as you open the door and allow the steam
to escape.
ATTENTION : Faites attention lorsque vous ouvrez la porte. La vapeur brûlante qui
s’échappe lorsque vous ouvrez la porte pendant un programme de lavage peut
causer des brûlures. Lorsque vous ouvrez la porte, reculez et laissez la vapeur
s’échapper de l’appareil.
To restart the wash process, close the door until it locks in place. There may be a time delay of
up to a few minutes because the temperature inside your Chef’s Washer needs to stabilize before
it restarts the wash cycle.
To cancel the cycle after it has started, press and hold the START/CANCEL button for 3 seconds.
The Chef’s Washer will start to drain and the cycle indicator lights will flash. At this point a new
wash cycle can be selected. If a new cycle is not selected, all the Cycle Indicator lights will go out
after the Chef’s Washer drains completely. If you have selected a new wash cycle, remember to
add more detergent to the detergent compartment if required.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Panel – ZBD6905
Chef’s Washer
You can locate
your model
ZBD6905
number on the
inside upper
tub flange.
Throughout this
manual, features
and appearance
may vary from
your model.
1
2
3
4
5
1. Cycle Status Indicators–This display tells you what is happening while the Chef’s Washer is in
operation. All of the Cycle Status Indicators will flash on and off if either the door is opened
during a cycle or if the cycle has been paused. Your wash is complete when the CLEAN light
is illuminated.
Control
Settings
SENSING
Displayed when the dishwasher is monitoring temperature and water level
during fill and drain.
WASHING
RINSING
DRYING
CLEAN
Displayed during the prewash and main wash periods.
Displayed during rinse periods.
Displayed during the dry period (if SMART DRY is selected).
Displayed when cycle is complete. Light remains ON until the door is opened.
2. Cycle Selections–The light on the selected pad will illuminate to indicate which cycle has been
selected.
HEAVY DUTY
For pans or cookware with dried-on or baked-on soils.
This cycle may not remove some burned-on foods.
NORMAL WASH For loads of everyday cookware with medium soils. NOTE: For heavily soiled
cookware, choose NORMAL WASH plus HIGH water temperature option.
LIGHT WASH
RINSE ONLY
For lightly soiled cookware or recently used, lightly soiled cooking
utensils and cookware to be washed in a short time.
For rinsing partial loads that will be washed later. Do not use detergent with
this cycle.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Panel/Operation – ZBD6905
Chef’s Washer
3. SMART DRY–When selected, sensors detect the presence of rinse aid and the final rinse
temperature. The drying heater and fan are then turned on for the minimum time to achieve
optimum drying results, saving energy over conventional heated dry and time over non-heated
dry. SMART DRY is not available on RINSE ONLY.
4. WATER TEMP–This button provides extra heat options to increase water temperature for
optimum performance.
NORMAL
This is the default setting–provides a wash and rinse with water temperatures
up to 125°F (51°C) in the LIGHT WASH, 135°F (57°C) in the NORMAL
WASH cycle and 155°F (68°C) in HEAVY DUTY.
HIGH
This water temp selection provides a wash and rinse with water temperatures
up to 160°F (71°C) in LIGHT WASH, NORMAL WASH and HEAVY DUTY.
Use this option for heavily soiled dishes. Cannot be used with RINSE ONLY.
SANI
This water temp selection provides a sanitizing wash and rinse with water
temperatures up to 160°F (71°C) in LIGHT WASH and 171°F (77°C) in
NORMAL WASH and HEAVY DUTY. Cannot be used with RINSE ONLY.
At the end of the WASH cycle, the SANI OPTION light will remain illuminated
to indicate that the sanitization conditions have been met.
E
NSF INTERNATIONAL
Meets NSF Protocol for Performance of Domestic Spray-Type Pots
and Pans Washing Machines (NSF Protocol P180) Requirements
for cleaning and sanitization of cookware.
5. DELAY START–This option will allow you to delay the start time of any wash cycle except
RINSE ONLY for up to 6 hours.
1. Select the delay start time you want by pressing the DELAY START button. Multiple pressing
will alternate the delay time between 2, 4 or 6 hours and OFF.
2. The last programmed cycle will automatically be selected. A new cycle and options can also
be selected. The DELAY START light/lights will flash to indicate time selected.
3. The flashing Delay Start Indicators show how many hours will elapse before washing begins.
To start the Chef’s Washer, close the door until it locks in place. The last used cycle will be
displayed. To begin this cycle, push the START button. To select a different cycle, push the desired
Cycle Selection and Option buttons, and then press the START button.
Start a
wash load
The door must be closed and latched into place to select a cycle or an option.
To interrupt/pause a cycle, press the selected cycle button. The Status Indicators will flash.
CAUTION: Be careful when opening the door; the hot steam that escapes when the door is
opened may cause injuries. Stand back as you open the door and allow the steam
to escape.
ATTENTION : Faites attention lorsque vous ouvrez la porte. La vapeur brûlante qui s’échappe
lorsque vous ouvrez la porte pendant un programme de lavage peut causer des
brûlures. Lorsque vous ouvrez la porte, reculez et laissez la vapeur s’échapper
de l’appareil.
To restart the wash process, close the door until it locks in place. Re-press the cycle button. There
may be a time delay of up to a few minutes, because the temperature inside the Chef’s Washer
needs to stabilize before it restarts the wash cycle. During this time the SENSING light will be on.
To cancel the cycle after it has started, press and hold the START/CANCEL button for 3 seconds.
The Chef’s Washer will then drain and the cycle indicator lights will flash. At this point a new wash
cycle can be selected. If a new cycle is not selected, all the Cycle Indicator lights will go out after the
Chef’s Washer drains. If you have selected a new wash cycle, remember to add more detergent to
the detergent compartment if required.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Panel – ZBD7005 & ZBD7105
Chef’s Washer
You can locate
your model
ZBD7005 & ZBD7105
number on the
inside upper
tub flange.
Throughout this
manual, features
and appearance
may vary from
your model.
1
2
3
4
1. Cycle Selections–The light on the selected pad will illuminate to indicate which cycle has been
selected.
Control
Settings
HEAVY DUTY
For pans or cookware with dried-on or baked-on soils.
This cycle may not remove some burned-on foods.
NORMAL WASH For loads of everyday cookware with medium soils. NOTE: For heavily soiled
cookware, choose NORMAL WASH plus HIGH water temperature option.
LIGHT WASH
RINSE ONLY
For lightly soiled cookware or recently used, lightly soiled cooking utensils
and cookware to be washed in a short time.
For rinsing partial loads that will be washed later. Do not use detergent with
this cycle.
2. WATER TEMP–This button provides extra heat options to increase water temperature for
optimum performance.
NORMAL
This is the default setting–provides a wash and rinse with water temperatures
up to 125°F (51°C) in LIGHT WASH, 135°F (57°C) in the NORMAL WASH
cycle and 155°F (68°C) in HEAVY DUTY.
HI TEMP
SANITIZE
This water temp selection provides a wash and rinse with water temperatures
up to 160°F (71°C) in LIGHT WASH, NORMAL WASH and HEAVY DUTY.
This water temp selection provides a sanitizing wash and rinse with water
temperatures up to 160°F (71°C) in LIGHT WASH and 171°F (77°C) in NORMAL
WASH and HEAVY DUTY. This selection cannot be used with RINSE ONLY.
At the end of the wash cycle, the SANITIZE OPTION light will remain
illuminated to indicate that the sanitization conditions have been met.
E
NSF INTERNATIONAL
Meets NSF Protocol for Performance of Domestic Spray-Type Pots
and Pans Washing Machines (NSF Protocol P180) Requirements
for cleaning and sanitization of cookware.
3. SMART DRY–When selected, sensors detect the presence of rinse aid and the final rinse
temperature. The drying heater and fan are then turned on for the minimum time to achieve
optimum drying results, saving energy over conventional heated dry and time over non-heated
dry. SMART DRY is not available on RINSE ONLY.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Panel/Operation – ZBD7005 & ZBD7105
Chef’s Washer
4. DELAY START–This option will allow you to delay the start time of any wash cycle except
RINSE ONLY for up to 6 hours.
Control
Settings
• Select the delay start time you want by pressing the DELAY START button. Multiple pressing
will alternate the delay time between 2, 4 or 6 hours and OFF.
To start the Chef’s Washer, open the Chef’s Washer door so that the top-of-door controls are
visible. The last used cycle will be displayed. To begin this cycle, press the START button. To select
a different cycle, press the desired Cycle Selection and Option buttons, and then press the START
button. After the door is closed and latched, the selected cycle will begin.
Start a
Wash Load
To interrupt/pause a cycle, gently open the door just enough to turn off the wash motor. Do not
fully open the door until the wash action ceases.
WARNING: Do not fully open door while the Chef’s Washer is in operation. Quickly opening
the door while the Chef’s Washer is operating could result in serious scalding.
Be careful when opening the door; the hot steam that escapes when the door
is opened may cause injuries. Stand back as you open the door and allow the
steam to escape.
AVERTISSEMENT : N’ouvrez pas complètement la porte lorsque la laveuse fonctionne. Une
ouverture rapide de la porte lorsque l’appareil est en fonctionnement
peut entraîner de sérieuses brûlures. Faites attention lorsque vous ouvrez
la porte; la vapeur brûlante qui s’échappe lors de l’ouverture de la porte
peut causer des blessures. Tenez vous en arrière lorsque vous ouvrez la
porte afin de permettre à la vapeur de s’échapper.
To restart the wash process, close the door until it locks in place. There may be a time delay of
up to a few minutes because the temperature inside the Chef’s Washer needs to stabilize before
it restarts the wash cycle.
To cancel the cycle after it has started, press and hold the START/CANCEL button for 3 seconds.
The Chef’s Washer will start to drain and the cycle indicator lights will flash. At this point a new
wash cycle can be selected. If a new cycle is not selected, all the Cycle Indicator lights will go out
after the Chef’s Washer drains completely. If you have selected a new wash cycle, remember to
add more detergent to the detergent compartment if required.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Features – ZBD6605, ZBD6905, ZBD7005, ZBD7105
Chef’s Washer
You can prevent the beep from sounding when selecting control settings.
Tone
1. Press the START/CANCEL and NORMAL WASH buttons together prior to selecting settings.
Silencing
(on some
models)
2. To have sound again, simply press the START/CANCEL and NORMAL WASH buttons
together again.
Your Chef’s Washer has the ability to remember what options you like with NORMAL WASH and
HEAVY DUTY wash cycle. This means that if you select NORMAL WASH, your Chef’s Washer will
automatically select the options that you selected last time you washed with the NORMAL WASH cycle.
You can change the options that have been remembered with a particular wash cycle if you desire.
Auto
Memory
To reduce the possibility of children starting the Chef’s Washer when unattended, a child lockout
feature can be enabled. Once enabled, each button must be pressed and held for two seconds until
you hear a BEEP, before the Chef’s Washer will respond. While in this mode, the SENSING and
CLEAN light will illuminate while the button is pressed.
Child
Lockout
Mode
(on some
models)
This feature can be enabled by pressing both the START/CANCEL and HEAVY DUTY buttons
together and holding both for two seconds. You will hear three BEEPS when the child lockout
is enabled.
The child lockout can be cancelled by pressing the START/CANCEL and HEAVY DUTY together
and holding both pressed for two seconds until a single BEEP is heard.
NOTE: Child lockout overrides tone silencing.
APPROXIMATE CYCLE TIME
Cycle Chart
With 120°F Water
(excluding drying time)
TEMPERATURE (°F)
WATER USAGE
(Gallons)
Sani
(on some
models)
CYCLES
Normal
155
High
Normal
High
77
Sani
HEAVY DUTY
NORMAL WASH
LIGHT WASH
SPEED WASH
RINSE ONLY
160
171
7.4
5.0–11.2
5.0
70
50
30
23
11
84
80
63
—
—
135
145–160 160–171
94
125
135–160
160
—
50
115–125
—
—
—
3.8
—
—
1.2
—
SOFT WATER
0–3 grains
MEDIUM WATER
3–7 grains
HARD WATER
7–12 grains*
Detergent
Usage
CYCLES
Main Cup
Auxiliary Cup
None
Main Cup
Full
Auxiliary Cup Main Cup Auxiliary Cup
Guide
HEAVY DUTY
NORMAL WASH
LIGHT WASH
SPEED WASH
RINSE ONLY
Full
Full
Full
Full
Full
Full
Full
Full
Full
Full
Full
Full
Full
(Powder or
Liquid)
1
⁄
2
None
Full
None
None
Full
1
⁄
2
None
Full
1
⁄
2
None
Full
Use no detergent
Use no detergent
Use no detergent
*12 grains and up is extremely hard water. A water softener
is recommended. Without it, lime can build up in the water
valve. The water valve may stick and flooding could occur.
NOTE: The above chart is a general guide. Detergent
amounts should be adjusted depending on the amount
and type of soil until satisfactory results are achieved.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Chef’s Washer
Chef’s Washer
The entering water must be at least 120°F
(49°C) and not more than 150°F (66°C), for
effective cleaning and to prevent dish damage.
Check the water temperature with a candy or
meat thermometer. Turn on the hot water
faucet nearest the Chef’s Washer, place
the thermometer in a glass and let the water
run continuously into the glass until the
temperature stops rising.
Water
Temperature
A rinse agent improves dry performance,
reduces spots and prevents new film buildup
on your dishes, glasses, flatware, cookware
and plastic.
• If rinse agent spills, wipe it up immediately.
It can keep your detergent from working.
Use a Rinse
Agent
•
If after washing you notice cloudy spots,
streaks or water marks on the glassware, and
the rinse agent dispenser is not empty, it may
be necessary to increase the dispenser settings.
To do so, remove the cap and using a butter
knife, rotate the indicator arrow to a higher
number. Replace the cap when done.
Fill the rinse agent chamber by rotating the
round cap counterclockwise and remove. Fill
chamber to maximum level. Replace and lock
the cap into place.
To check if rinse agent is needed: a solid black
indicator indicates sufficient rinse agent; a clear
indicator indicates a low level and requires
adding more rinse agent.
•
•
If glasses appear smeared or there is foam
present on the bottom of the glasses or the
bottom of the machine, select a lower dosage
number.
• A full dispenser should last about one month.
For softened water, reduce dispenser setting.
Light level indicator
Adjust to higher or lower number
Use only detergent specifically made for use in
dishwashers. Keep your powdered detergent
fresh and dry. Don’t put powder detergent into
the dispenser until you’re ready to wash dishes.
When using automatic dishwashing detergent
tabs, place one tab in the main cup and close.
Detergents
Be sure the Cycle Status Indicators (on some
models) are not lit before adding detergent.
Otherwise, the detergent cup will not close and
latch properly. Add detergent, then close the
main cup.
The amount of detergent to use depends on
whether your water is hard or soft. With hard
water, you need extra detergent. With soft
water, you need less detergent.
NOTE: To open detergent cup after it has been
Protect your dishes and Chef’s Washer by
contacting your water department and asking
how hard your water is. Twelve or more grains
is extremely hard water. A water softener is
recommended. Without it, lime can build up
in the water valve, which could stick while open
and cause flooding. Too much detergent with
soft water can cause a permanent cloudiness
of glassware, called etching.
closed, push the lever latch inward.
Main compartment
Auxiliary
compartment
Lever
To open the detergent compartment, push the
lever latch inward.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the Racks
Chef’s Washer
This Chef’s Washer is designed for dishwasher-safe gourmet cookware.
The upper rack is for small bowls and pans. This is
also a secure place for dishwasher-safe plastics.
Upper Rack
Because bowls and casserole dishes come in various
sizes, after loading, slowly push in the rack to make sure
they will clear the top of the Chef’s Washer.
The upper rack is also good for all kinds of oddly-
shaped utensils. Saucepans, mixing bowls and other
items should be placed face down.
Make sure small plastic items are secure so they can’t
fall onto the heating element.
The upper rack can be raised or lowered to
provide extra room for different sized items.
Empty the upper rack. Remove the rail pegs
in the front of the rack runners by squeezing
and lifting the top of the peg, then slide the
Re-insert the rack in the chosen position and
replace the pegs. Check that the spray arm is
free to rotate.
Adjusting
Upper Rack
Height
rack out.
Lift peg from
rack runner
Re-adjust
upper rack
Squeeze
Take care not to obstruct the rotation of the
spray arm under the upper rack or cover the
water collector in the center of the upper rack.
Upper
Wash
Tower
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Put flatware in the removable basket with fork and knife handles up to protect your hands. Place
spoons in the basket with handles down. Mix knives, forks and spoons so they don’t nest together.
Distribute evenly. Small plastic items, such as measuring spoons and lids from small containers,
should go in the bottom of the silverware basket with silverware on top.
Silverware
and Utensil
Basket
Flip-down covers can be lowered to secure lightweight items from the effects of the vigorous wash
action. The slots in the covers can be used to separate silverware.
Don’t let any item extend through bottom
When loading the lower rack, do not load tall platters
or trays in the front left corner. They may prevent
detergent cup from opening during the wash cycle.
Lower Rack
The lower rack is best used for large trays, saucepans
and cookware. There is 15″ clearance for tall items.
Large items such as broiler pans and racks should go
along the sides. Load platters, pots and bowls along
the sides, in corners or in the back. The soiled side
of items should face down or the center of the rack.
Fold-down tray dividers provide flexibility for extra
large and hard-to-fit items.
The tray dividers may be left in the up position or
folded down to customize the lower rack.
Tray Divider
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Cleaning
Chef’s Washer
To clean the control panel, use a lightly dampened cloth, then dry thoroughly. To clean the
exterior painted panels, use a good appliance polish wax.
Exterior
Interior
Never use sharp objects, scouring pads or harsh cleaners on any part of the Chef’s Washer.
Use stainless steel cleaner on stainless steel panel. You can order Stainless Steel Magic # WX10X15
through GE Parts in the USA, by calling 800.626.2002. In Canada, call 1.888.880.3030.
The stainless steel tub can be cleaned with Stainless Steel Magic or a similar product using
a clean, soft cloth.
Use stainless steel cleaner on stainless steel panel. You can order Stainless Steel Magic # WX10X15
through GE Parts in the USA, by calling 800.626.2002. In Canada, call 1.888.880.3030.
Wipe the rubber door seals occasionally, including the seal at the bottom of the door.
If your Chef’s Washer is left in an unheated place during the winter, ask a service technician to:
1. Cut off electrical power to the Chef’s Washer. Remove fuses or trip circuit breaker.
2. Turn off the water supply and disconnect the water inlet line from the water valve.
3. Drain water from the water inlet line and water valve. (Use a pan to catch the water.)
4. Reconnect the water inlet line to the water valve.
Protect
Against
Freezing
5. Remove the filters from the tub bottom and use a sponge to soak up water.
An air gap protects your Chef’s Washer against
The Air
Gap
Two types
of air gaps
water backing up into it if a drain clogs. The air
gap is not a part of the Chef’s Washer. It is not
covered by your warranty. Not all plumbing
codes require air gaps, so you may not have one.
The air gap is easy to clean.
1. Turn off the Chef’s Washer and lift off the
chrome cover.
2. Unscrew the plastic cap and clean with
a toothpick.
Check the air gap any time your Chef’s Washer
isn’t draining well.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Periodically, remove and clean the spray arms
to make sure that none of the nozzles have
become blocked.
Removing
and Cleaning
the Spray
Arms and
Glass Trap
Pull up to remove
To remove the lower spray arm, grasp the
center of the spray arm and pull upward; it will
unclip. When replacing, make sure the spray
arm is fully seated and spins.
The plastic cone on the underside of the
spray arm can be detached by unscrewing it
counterclockwise.
To remove the upper spray arm, carefully
unscrew the spray arm from the plastic tower.
To achieve this, hold the inner tower steady
and unscrew the spray arm clockwise. To
replace the spray arm, carefully screw the spray
arm counterclockwise onto the inner tower.
Rotate counterclockwise
to remove cone
To clean the upper and lower spray arms,
rinse them under running water and make
sure spray nozzles are clear.
The glass trap is located in the stainless steel
filter at the base of your Chef’s Washer. The
glass trap is used to collect larger food items
and other foreign objects, which may be too
big to pass through the drain pump. For best
wash performance, check the glass trap
occasionally.
Rotate counterclockwise and
lift to remove glass trap
To remove the glass trap, twist counterclockwise,
rotate the glass trap and lift. To clean the glass
trap, empty and rinse thoroughly. To replace,
reverse these steps, making sure the glass trap
locks into place.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Cleaning
Chef’s Washer
In addition to the glass trap, your Chef’s
Washer has three fine filters–
The Wash
Filters
• a two piece round perforated stainless steel
filter located in the base of the Chef’s Washer.
• a finer micro-mesh filter located under the
stainless steel filter.
Grip filter and lift
to remove
• a super fine filter located below the lower
spray arm.
Perforated stainless
steel filter
Remove the stainless steel filter by first twisting
and removing the glass trap. Lift out the
stainless steel filter.
Micro-mesh filter
Attached to the underside of this filter is the
micro-mesh filter. To remove the micro-mesh
filter, squeeze the two clips above the stainless
steel filter to release the micro-mesh.
To remove the super fine filter, remove the
lower spray arm. Grasp the super fine filter
around the outer edges. Remove by pulling
upward; it will unclip. Unscrew the tower
counterclockwise. The right half of the stainless
steel filter can now be removed.
Squeeze clips to remove
micro-mesh filter
To clean filters, place under running water
and gently brush with a soft bristled brush.
Be careful not to deform filters while cleaning,
as this may prevent them from being properly
re-installed.
Pull super fine
filter up to remove
The super fine filter is self-cleaning; there is
no need to clean it. This filter need only be
removed if you want to remove the right half
of the stainless steel filter.
Replace your filters in the reverse order,
starting with the right half of the stainless
steel filter. Then screw in the tower. Replace
the super fine filter over the tower by pressing
firmly on the outer edge until it clips into
place and reposition the lower spray arm.
Reconnect the micro-mesh filter to the left
half of the stainless steel filter prior to
Lift stainless steel
filter to remove
replacing it back into the Chef’s Washer. Then
replace the glass trap. Ensure that all filters
are replaced correctly for best results.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
For best performance, check the water fill level of your
Chef’s Washer.
Water Fill
Level
Maximum level
Once the Chef’s Washer is fully connected, run it through
a complete RINSE ONLY (on some models) cycle to
ensure it is emptying and filling correctly. For low water
pressure situations, run the RINSE ONLY (on some
models) cycle 3 times. Halfway through the final RINSE
ONLY (on some models) cycle, pause the Chef’s Washer
and check the water level inside the Chef’s Washer. If the
water level is not above the minimum water level (marked
on the lower spray support tower), increase the fill level.
Minimum level
Continue to press the
START/CANCEL button until the
desired indicator is illuminated.
1. Ensure the Chef’s Washer is not running through a
cycle. Depress the WATER TEMP button for ten
seconds until the second buzzer sounds.
Cycle Status
Indicators
Fill time
2. Press the START/CANCEL button to select fill time,
SENSING
WASHING
RINSING
DRYING
CLEAN
55 seconds
60 seconds
65 seconds
75 seconds
85 seconds
as per chart (65 seconds is the factory setting).
3. To test time, press DELAY START. The Chef’s Washer
will start filling. Listen for the Chef’s Washer to
complete filling. Once filled, the fill level must be
checked to ensure fill time is correct.
4. Once complete, press the WATER TEMP button to
exit fill time mode.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Call For Service
Chef’s Washer
PROBLEM
POSSIBLE CAUSE
WHAT TO DO
Questions?
Use this
problem
solver
Chef’s Washer
will not run
Door not properly
closed
•Press door until it clicks shut.
Door is opened during
the cycle when the water
is hot
•Relatch door. Wait a few minutes; Chef’s
Washer will start automatically after the
temperature stabilizes.
Child Lockout Mode
is selected
•Press and hold desired button for two
seconds to activate. See Child Lockout Mode
section for more details.
Fuse is blown, or the
•Reset the circuit breaker.
circuit breaker tripped
•Replace fuse or reset circuit breaker.
Remove any other appliances from the circuit.
Power supply not
connected
•Check that the Chef’s Washer is plugged in
and the switch is on.
Unusual noises
Some of the sounds you
will hear are normal:
• Detergent cup opening
• Water draining out of
the tub after touching a
keypad or starting a cycle
Utensils are not secure in • Make sure everything is secured in
the rack or something
small has dropped into
the rack
Chef’s Washer.
Foreign material in
the sump
•Clean the filters/foreign objects cover.
•Reposition the dishes.
Detergent left in
dispenser cups
Dishes are blocking the
detergent cups
Water will not pump
out of the tub
Disposer knock-out plug •Remove knock-out plug.
has not been removed
Drain is clogged
•Clean air gap (if applicable).
•If the Chef’s Washer drains into a disposer,
run disposer to assure it is draining properly.
•Check to see if your kitchen sink is draining
well. If not, you may need a plumber.
Suds in the tub
Correct detergent was
not used
• Use only automatic dishwasher detergents
to avoid sudsing.
•To remove suds from the tub, open the
Chef’s Washer and let suds evaporate. Add
1 gallon of cold water to the tub.
For 7000 series models:
•Pump out water by pressing the NORMAL
WASH button, then press start.
•Close the door until it locks into place.
•Wait for one minute, then carefully
open the door and hold down the
START/CANCEL button for three seconds.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEM
POSSIBLE CAUSE
WHAT TO DO
Questions?
Use this
problem
solver
Suds in the tub (cont.)
For all other models:
•
Pump out water by closing the door until
it locks into place.
•Press the NORMAL WASH button, then
press start.
•Wait for one minute, then press and hold
down the START/CANCEL button for
three seconds. Repeat if necessary.
Too much rinse agent used • Remove any spilled rinse aid.
•Reduce rinse aid setting.
•For soft water, rinse aid may be unnecessary.
Dishes and flatware
not clean
Improper rack loading
Filter or spray arms dirty
•Make sure large dishware does not block
the detergent dispenser or the wash arm.
•Assure silverware is not blocking spray arm.
•Clean filters and spray arms according to
instructions on page 20.
Inlet water temperature
is below 120°F
•Run tap until water is hot, prior to starting
Chef’s Washer cycle.
• Raise the water heater temperature to 120°F.
•Depending on model, use WATER TEMP
HIGH or WATER TEMP SANI option if
suitable for dish load.
Air gap is clogged
•Clean the air gap.
Water pressure is
temporarily low
•Turn on a faucet. Is water coming out more
slowly than usual? If so, wait until pressure
is normal before using your Chef’s Washer.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Call For Service
Chef’s Washer
PROBLEM
POSSIBLE CAUSE
WHAT TO DO
Questions?
Use this
problem
solver
Black or gray marks
on dishes
Aluminum utensils have
rubbed against dishes
• Remove marks with a mild, abrasive cleaner.
Dishes do not dry
HEAT/SMART DRY
not selected
• Depending on model, select HEAT DRY
or SMART DRY.
Rinse agent dispenser
is empty
• Check the rinse agent dispenser.
Chef’s Washer is paused
• To restart the wash cycle, press the selected
wash button.
Low inlet water
• Run tap until water is hot prior to starting
Chef’s Washer cycle.
• Assure inlet water temperature is at
least 120°F.
• Depending on your model, select WATER
TEMP HIGH & HEAT DRY or WATER
TEMP SANI and HEAT DRY options.
Chef’s Washer won’t start Door not properly closed • Press door until it clicks shut.
Door opened during cycle • Re-latch door. Wait a few minutes; Chef’s
when water is hot
Washer will restart automatically.
Child Lockout mode
is selected
• Press and hold desired button for two
seconds. See Child Lockout mode section
for models ZBD6905, ZBD 7005 and ZBD 7105.
Power supply not connected • Check that Chef’s Washer is plugged in and
switch is on.
All cycle status indicators Door not properly closed • Press door until it clicks shut.
flashing or beeping every
30 seconds (on ZBD6905,
ZBD 7005 and ZBD 7105)
Chef’s Washer is paused
• To restart the wash cycle, press the selected
wash button.
Motor starts but water
doesn’t enter Chef’s
Washer (flashing POTS
LIGHT) (on models
ZBD 6905, ZBD 7005
and ZBD 7105)
Water supply valve
turned off
• Open water supply valve.
Program taking too
long or not advancing
properly
Low inlet water temperature • Run tap until water is hot prior to starting
Chef’s Washer cycle.
• Allow time to heat water (up to one hour).
• Check inlet water temperature.
• Connect to hot water supply.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEM
POSSIBLE CAUSE
WHAT TO DO
Questions?
Use this
problem
solver
Water does not empty
out of Chef’s Washer
(flashing RINSE ONLY
light) (on models
ZBD6905, ZBD7005 and
ZBD7105)
Outlet blocked
• Check garbage disposal and air gap
for blockage.
• Check outlet hose for kinks and sharp bends.
Chef’s Washer continues Faulty fill valve
to drain indefinitely
• First, turn off water supply valve, then turn
off circuit breaker and call for service.
Yellow color on dishes
and glassware
Water has iron or other
mineral content
• A special filter in the water supply line is
the only way to correct this problem.
Contact a water softener company.
White film on glasses;
tea and coffee stains
Hard water
• Try progressively increasing the Rinse Aid
setting to 6. See the Rinse Agent section.
Repeated use of Sani
• Discontinue use of Sani option.
Brown spots or pitting
of stainless steel;
tarnishing of silver
Consistently low water
level in Chef’s Washer
• Check that operating water level is between
the MIN. and MAX. indicators on lower
spray arm support tower. See Care and
Cleaning section.
Electrolysis following
contact with other metals
• Wash scratched or worn pieces by hand.
Polish silverware with a silver-plate cleaner.
Detergent thrown over the • Load detergent properly. See Using the
cutlery or saucepans
Chef’s Washer section.
Light goes out
• Call for service.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumer Services
monogram.com
Chef’s Washer
With the purchase of your new Monogram appliance, receive the
assurance that if you ever need information or assistance from GE,
we’ll be there. All you have to do is call–toll-free!
®
Whatever your question about any Monogram major appliance, GE Answer Center
GE Answer
Center®
information service is available to help. Your call–and your question–will be answered
promptly and courteously. And you can call any time. GE Answer Center service is open
®
24 hours a day, 7 days a week.
In the USA:
800.626.2000
OR
Visit our Website at: monogram.com
In Canada, call 1.888.880.3030.
A GE consumer service professional will provide expert repair service, scheduled at a time
that’s convenient for you. Many GE Consumer Service company-operated locations offer you
service today or tomorrow, or at your convenience (7:00 a.m. to 7:00 p.m. weekdays, 9:00 a.m.
to 2:00 p.m. Saturdays). Our factory-trained technicians know your appliance inside and out–
so most repairs can be handled in just one visit.
In-Home
Repair Service
In the USA:
800.444.1845
In Canada:
1.888.880.3030
GE offers Braille controls for a variety of GE appliances, and a
brochure to assist in planning a barrier-free kitchen for persons
with limited mobility.
For Customers
With Special
Needs…
Consumers with impaired hearing or speech who have access to a
TDD or a conventional teletypewriter may call 800.TDD.GEAC
(800.833.4322) to request information or service.
In the USA:
800.626.2000
You can have the secure feeling that GE Consumer Service will still be there after your
warranty expires. Purchase a GE contract while your warranty is still in effect and you’ll
receive a substantial discount. With a multiple-year contract, you’re assured of future
service at today’s prices.
Service Contracts
In the USA:
800.626.2224
In Canada:
1.888.880.3030
Individuals qualified to service their own appliances can have parts or accessories sent directly
to their home. The GE parts system provides access to over 47,000 parts…and all GE Genuine
Renewal Parts are fully warranted.
Parts and
Accessories
User maintenance instructions contained in this manual cover procedures intended to be
performed by any user. Other servicing generally should be referred to qualified service
personnel. Caution must be exercised, since improper servicing may cause unsafe operation.
In the USA:
800.626.2002
In Canada:
1.888.880.3030
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty for customers in the USA
Chef’s Washer
YOUR MONOGRAM CHEF’S WASHER WARRANTY
Staple sales slip or cancelled check here. Proof of original purchase
date is needed to obtain service under warranty.
ONE-YEAR
WHAT IS
Any part of the Chef’s Washer which fails due to a defect in materials or workmanship. During
this full one-year warranty, GE will also provide, free of charge, all labor and in-home service to
replace the defective part.
COVERED
From the Date
of the Original
Purchase
Second Year
Any part of the Chef’s Washer which fails due to a defect in materials or workmanship. During
this second-year limited warranty, you will be responsible for any labor or in-home service costs.
Five Years
The Chef’s Washer rack, if it should rust, or the electronic control module, if it should fail due
to a defect in materials or workmanship. During this five-year limited warranty, you will be
responsible for any labor or in-home service costs.
Lifetime
The stainless steel tub or door liner, if it fails to contain water due to a defect in materials or
workmanship. During this full lifetime warranty, GE will also provide, free of charge, all labor
and in-home service to replace the defective part.
This warranty is extended to the original purchaser and any succeeding owner for products
purchased for ordinary home use in the 48 mainland states, Alaska, Hawaii and Washington, D.C.
Proof of original purchase date is needed to obtain service under the warranty.
All warranty service will be provided by our Factory Service Centers or by our authorized
®
Customer Care servicers during normal working hours.
Should your appliance need service, during warranty period or beyond, call 800.444.1845.
• Service trips to your home to teach you how
to use the product.
• Damage to the product caused by accident,
fire, floods or acts of God.
WHAT IS NOT
COVERED
• Improper installation.
• Incidental or consequential damage caused by
possible defects with this appliance.
• Replacement of house fuses or resetting
of circuit breakers.
• Cleaning or servicing of the air gap device in
the drain line.
• Failure of the product if it is abused, misused,
or used for other than the intended purpose
or used commercially.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so
the above limitation or exclusion may not apply to you. This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state. To know what your legal
rights are in your state, consult your local or state consumer affairs office or your state’s Attorney
General.
Warrantor: General Electric Company, Louisville, KY 40225.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty for customers in Canada
Chef’s Washer
YOUR MONOGRAM CHEF’S WASHER WARRANTY
Staple sales slip or cancelled check here. Proof of original purchase
date is needed to obtain service under warranty.
ONE-YEAR
WHAT IS
Any part of the Chef’s Washer which fails due to a defect in materials or workmanship. During
this full one-year warranty, GE will also provide, free of charge, all labor and in-home service to
replace the defective part.
COVERED
From the Date
of the Original
Purchase
Second Year
Any part of the Chef’s Washer which fails due to a defect in materials or workmanship. During
this second-year limited warranty, you will be responsible for any labor or in-home service costs.
Five Years
The Chef’s Washer rack, if it should rust, or the electronic control module, if it should fail due
to a defect in materials or workmanship. During this five-year limited warranty, you will be
responsible for any labor or in-home service costs.
Lifetime
The stainless steel tub or door liner, if it fails to contain water due to a defect in materials or
workmanship. During this full lifetime warranty, GE will also provide, free of charge, all labor
and in-home service to replace the defective part.
This warranty is extended to the original purchaser and any succeeding owner for products
purchased for ordinary home use in Canada. Proof of original purchase date is needed to obtain
service under the warranty.
All warranty service will be provided by our Factory Service Centers or by our authorized
®
Customer Care servicers during normal working hours.
Should your appliance need service, during warranty period or beyond, call 1.888.880.3030.
• Service trips to your home to teach you how
to use the product.
• Damage to the product caused by accident,
fire, floods or acts of God.
WHAT IS NOT
COVERED
• Improper installation.
• Incidental or consequential damage caused by
possible defects with this appliance.
• Replacement of house fuses or resetting of
circuit breakers.
• Cleaning or servicing of the air gap device in
the drain line.
• Failure of the product if it is abused, misused,
or used for other than the intended purpose or
used commercially.
Some provinces do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitation or exclusion may not apply to you. This warranty gives you specific legal
rights, and you may also have other rights which vary from province to province. To know what
your legal rights are in your province, consult your local or provincial consumer affairs office.
Warrantor: Camco Inc., 1 Factory Lane, Suite 310, Moncton, N.B. E1C 9M3.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Chef’s Washer
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Chef’s Washer
30
Download from Www.Somanuals.com. All Manuals Search And Download.
o d a y M a i l T t a n t I m p o r
e g i s t r a t i o n O w n e r s h i p R
o d u c t C o n s u m e r P r
G E A p p l i a n c e s
Place
1st Class
Letter
Stamp
Here
General Electric Company
Warranty Registration Department
P.O. Box 32150
Louisville, KY 40232-2150
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumer Product Ownership Registration
Dear Customer:
Thank you for purchasing our product and thank you for placing your confidence in us. We are proud to
have you as a customer!
Follow these three steps to protect your new appliance investment:
Complete and mail
your Consumer
After completing this
registration, write your
model and serial numbers
in this manual. You will
need this information
should you require
Read your “Owner’s
Manual” carefully.
It will help you
operate your new
appliance properly.
Product Ownership
Registration today.
Have the peace of mind
of knowing we can
contact you in the
unlikely event of a
safety modification.
service. The service
number in the USA:
800.444.1845. In Canada:
1.888.880.3030.
1
2
3
Important: To ensure that your product is registered, mail the separate product registration card.
If the separate product registration card is missing, fold and mail the form below. No envelope is needed.
FOLD HERE
Consumer Product Ownership Registration
Product
Chef’s Washer
Model
Serial
Miss l
Mr. l Ms. l Mrs. l
First
Name
Last
Name
Street
Address
Apt. #
Zip
Code
City
State
Date Placed
In Use
Month
Phone
Day
Year
Number
monogram.com
✄
®
Monogram
General Electric Company
Louisville, KY 40225
TAPE CLOSED
0616400354
165D4700P239
49-5913-1
®
Monogram
11-01 JR
General Electric Company
Louisville, KY 40225
Printed in Australia
Download from Www.Somanuals.com. All Manuals Search And Download.
|