™
Monogram.
ZET857BBBB - GE Monogram™ 30" Double Convection Wall Oven
Dimensions and Specifications (in inches)
23-1/2"
30"
Cutout Dimensions:
Height 47-5/8" min.
47-3/4" max.
28" min.
28-3/8 max.
Locate junction box above
or below cutout or through cabinet sides.
Width 28" min.
28-3/8" max.
Depth 23-1/2" min.
Cabinet depth required from front frame to inside rear
cabinet wall.
21-1/4"
*Most 30" wall cabinets can be used with
this unit.
The opening between the inside walls must
be at least 28" wide.
Allow minimum of 17-3/4" for clearance to adjacent
corners, drawers, walls, etc., when door
is opened.
47-5/8"
48"
Allow 3/4" for overlap of oven over side edges
of cutout.
Allow 1" for overlap and clearance of oven over top
of cutout and allow 1/4” at bottom for clearance.
12"
Installation Information:
22"
Before installing, consult installation instructions,
packed with the product, for current dimensional data
and for alternate installation options.
29-1/4"
Monogram Built-In Convection Double Ovens require
a separate, properly grounded 3-wire 208/120 or
240/120 volt, 60Hz power supply, protected by a time
delay fuse or circuit breaker. Ovens are supplied with
a flexible power cable.
2"x 4" or
Equivalent Runners
Convection double ovens are rated at 6.5 KW at 240
volts and 5.6 KW at 208 volts.
24"
®
For answers to your Monogram,
GE Profile Performance Series,
™
25"
30"
GE Profile™ or GE appliance questions, call
GE Answer Center® service, 800.626.2000.
Must Support 300 lbs.
Listed by
Underwriters
Laboratories
R
Specification Created 8/99
Download from Www.Somanuals.com. All Manuals Search And Download.
|