Answer-PhoneTM with
Voice Time/Day Stamp
MODEL 2-9892
USE & CARE GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Thank you for purchasing an Answer-PhoneTM from GE Communications Products. Your
new GE Model 2-9892 is a carefully engineered, high-quality durable product with natural
sound quality, modern features and elegant styling. It is designed to give you the quality and
convenience you expect in a telephone and answering machine.
To familiarize yourself with all the features of your telephone, please read the following
instructions carefully. Retain this Guide for future reference.
FCC NUMBER IS LOCATED ON THE BOTTOM OF THE BASE
LOAD NUMBER IS LOCATED ON THE BOTTOM OF BASE
OTHER IMPORTANT INFORMATION ON BACK COVER OF THIS GUIDE
Carefully remove unit from the package. Check this list to be
certain all components are included. Remember to save your
sales receipt in case you ever need warranty service.
•
A. Parts
•
Check List
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ANSWERPHONE
VOICE TIME/DAY STAMP
MEMO
MESSAGE RESET PLAY•STOP
ANSWER ON/OFF
FLASH
REDIAL
EMERGENCY
MESSAGES
MEMORY
STORE/IN
DIAL
ABC
JKL
DEF
1
1
2
5
8
0
3
6
9
#
2
3
4
GHI
MNO
4
7
5
6
PRS
TUV
WXY
7
8
9
OPER
ANSWER-PHONE BASE UNIT
HANDSET
COILED CORD
ONE LONG
TELEPHONE LINE CORD
ONE SHORT
TELEPHONE LINE CORD
Read the Use and Care Guide for the details
fo operation and other features
QUICK SET-UP
TM
MICROCASSETTE
10
IMPORTANT: INSTALL THE MICROCASSETTE TAPE
BEFORE PLUGGING IN THE POWER CORD.
0
5
FOR DESK USE
Unwrap the long straight Line Cord and plug
LINE jack on the back of the telephone
MC-30
A
Install the Microcassette tape into
the Power Supply into the wall out
AC POWER SUPPLY WITH
POWER SUPPLY CORD
ONE
QUICK SET-UP SHEET
MICROCASSETTE TAPE
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS and FEATURES
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
A Full Feature Telephone
• 12 Number Memory
-3 One Touch memory locations
-Memory for 9 additional frequently called numbers
-Convenient memory log in base
• One Touch Redial
• Lithium Battery provided for memory backup
• Ringer Volume Control
• Extra long 10’ Replaceable coiled handset cord
• Desk or Wall mountable
• Extremely compact size to fit in any home
• Attractive design to complement most decors
A. Telephone
Features
Tone/Pulse Switchable
• Touch-Tone dialing
• Pushbutton Pulse dialing
• Any combination of Tone and Pulse for access to long distance
services without added monthly Tone Access line charge
• Hearing Aid Compatible
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS and FEATURES
•
•
Deluxe Answerer Features
B. Answerer
• 10 Touch–Tone Remote Control Functions
-Playback Messages
-Reset Messages
-Remote “ON”
-Remote Memo
Features
•
•
•
•
•
•
•
•
•
•
-Rewind
-Retrieve messages when tape is full
-Change outgoing message
-Announcement Breakthrough
-Room Monitor
-Fast Forward
• Voice Time/Day Stamp–answerer will tell you the time and
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
day each message was received
• Single microcassette for recording of your own outgoing
announcement and incoming messages
• Music during tape shuttle
• Auto Disconnect–stops outgoing announcement when any
extension phone is picked up
• One-Touch operation for ease of use
• Remote “ON” in case you forget to turn on the Answerer
before you leave home
• LED Call Counter–informs you exactly how many messages
you have
• Call Screening Speaker
• Power Failure ProtectionTM
• Memo permits use as an electric memo pad
• Super VOXTM automatically disconnects when the calling
party hangs up
• FCC registered
• UL listed
• One-Year Limited Warranty
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS and FEATURES
ANSWERPHONE
VOICE TIME/DAY STAMP
9
1
10
3
2
MEMO
MESSAGE RESET PLAY•STOP
ANSWER ON/OFF
4
5
FLASH
REDIAL
EMERGENCY
MESSAGES
MEMORY
11
STORE/IN
DIAL
ABC
JKL
DEF
1
6
1
2
5
8
0
3
6
9
#
2
3
4
GHI
MNO
12
13
4
7
5
6
PRS
TUV
WXY
7
8
9
OPER
7
8
18
POWER VDC
PHONE LINE
16
17
14
HI
RINGER VOLUME
LO
OFF
ONE
PULSE
HI
VOLUME
LO
15
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS and FEATURES
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1. Hook Switch – Connects and disconnects the telephone.
2. Handset Hook – Holds the handset in place when
mounted on the wall.
3. Handset – Contains transmitter and receiver for phone
C. Telephone
Controls
conversation.
4. Flash Button – Creates a signal for special services
such as call waiting.
5. Memory Store/In Button – Stores phone numbers in
phone memory.
6. Base Jack – Jack for coil cord.
7. Handset Jack – Jack for coil cord.
8. ( ) and (#) – Used in touch tone mode for special
*
service functions.
9. Memory Dial Button – Dials stored phone numbers.
10. Redial Button – Redials last number dialed and acts
as pause function in memory storage of phone numbers.
11. Emergency Quick Dial Buttons – Provide instant
dialing of up to 3 important telephone numbers by
pressing A, B, or C.
12. Directory Card – Listing space for names/numbers in
phone memory.
13. Telephone Key Pad – Dials, enters phone numbers
into phone memory, and selects 1-9 stored numbers.
14. Phone Line Jack – Connects the supplied modular cord.
15. Base Plate –Enables the phone to be used on a table top,
or with a wall mount installation.
16. Ringer Volume – Sets ringer volume Hi, Lo, or Off.
17. Pulse/Tone Switch – Sets the dialing mode to match your
phone system.
18. Handset Coiled Cord
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS and FEATURES
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
18. Door – Opens for access to controls of the answering
D. Answerer
Controls
system.
19. Announcement Button – Records outgoing greeting or
allows playback to review.
20. Time Day Set – Allows setting of time day stamp
message added to incoming messages.
Hour Button – Sets the hour.
Minute Button – Sets the minute.
Day/Time Check Button – Sets day of the week. Also
provides audible time/day setting status.
21. On/Off Button and Indicator Light – Turns answer
function on or off.
Light ON: Answerer is on,
Light OFF: Answerer is off.
22. Play/Stop Button – Plays messages stored in
answering system and stops recorded message playback.
23. Message Reset Button – Resets and clears all
messages.
24. Messages Indicator – Displays number of messages.
25. Mic – Microphone picks up voice to record announcements
or memos.
26. Memo Button – Records memo in answering system.
27. Speaker
28. Power Jack – AC/DC Adapter input.
29. Volume – Sets message volume for answering system.
30. *Security Code – Factory preset three-digit number that
limits remote access to your messages (on bottom of
unit, not shown).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS and FEATURES
18
T O STORE TELEPHONE
NUMBERS IN MEMORY
ANNOUNCEMENT
1. LIFT HANDSET
2. PRESS STORE/IN
3.
19
M-C30
4. PRESS STORE/IN
HOUR
5. PRESS MEMORY
LOCATION
MINUTE
20
DAY
TIM
E
C
H
E
C
K
6.WRITE NAME ON
MEMORY CARD
MEMO
MESSAGE RESET PLAY•STOP
ANSWER ON/OFF
21
FLASH
REDIAL
EMERGENCY
MESSAGES
MEMORY
27
STORE/IN
DIAL
ABC
JKL
DEF
1
1
2
5
8
0
3
6
9
#
2
3
4
GHI
MNO
22
23
4
7
5
6
PRS
TUV
WXY
26
7
8
9
OPER
24
25
28
POWER VDC
PHONE LINE
29
HI
RINGER VOLUME
LO
OFF
ONE
T
PULSE
HI
VOLUME
LO
*Security Code, on bottom of unit, not shown.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION – DESK OR TABLE TOP
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Follow these steps to connect your new Answer-
PhoneTM for proper operation. Make sure you
have a modular telephone jack and a standard
AC electrical outlet near the place you have
chosen to install your Answer-PhoneTM.
A. Introduction
1. Connect the Coiled Cord
B. Installation for Desk or
Table Top Use
Plug one end of the coiled cord to the
handset and plug the other into the handset
jack. Place the handset in the cradle.
ANSWERPHONE
VOICE TIME/DAY STAMP
MEMO
MESSAGE RESET PLAY•STOP
ANSWER ON/OFF
FLASH
REDIAL
EMERGENCY
MESSAGES
MEMORY
STORE/IN
DIAL
ABC
JKL
DEF
1
1
2
5
8
0
3
6
9
#
2
3
4
GHI
MNO
4
7
5
6
PRS
TUV
WXY
7
8
9
OPER
2. Connect the Long Telephone Line Cord
Plug one end of the line cord into the
PHONE LINE plug on the unit. Plug the other
end into the telephone outlet. An RJ11C
outlet jack is required. If you don’t have an
RJ11C, an adapter can be purchased from
any telephone store.
PHONE LINE
10
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION – DESK OR TABLE TOP
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
3. Lift cassette compartment door and insert
micro cassette tape A side up.
T O STORE TELEPHONE
NUMBERS IN MEMORY
ANNOUNCEMENT
1. LIFT HANDSET
2. PRESS STORE/IN
3.
M-C30
4. PRESS STORE/IN
HOUR
5. PRESS MEMORY
LOCATION
MINUTE
DA
Y
TIM
E
C
H
E
C
K
6.WRITE NAME ON
MEMORY CARD
MEMO
MESSAGE RESET PLAY•STOP
ANSWER ON/OFF
4. Connect the Power Cord
Plug the right angle plug on the power cord
into the Answer-PhoneTM power jack.
POWER VDC
PHONE LINE
5. Plug in the Power Supply
Plug the Power Supply into the AC power
outlet.
Lift the HANDSET to check for dial tone.
Your installation is completed.
Note: During power outages the Answering
system will not function. The telephone,
however, will remain operational.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION – WALL MOUNT (optional)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1. Reverse the Handset Hook
Firmly slide the HANDSET HOOK out of
the CRADLE. Rotate it 180° and slide it
back into the CRADLE.
C. Installation for Wall
Mount Use
ANSWERPHONE
VOICE TIME/DAY STAMP
MEMO
MESSAGE RESET PLAY•STOP
ANSWER ON/OFF
2. Remove the Base Plate
For wall mount installations, press in the
two tabs and pull the BASE PLATE from
the back of the telephone.
Note: For future reference, please copy
your three digit security code located on
the bottom of the unit.
T
H
I
S
E
N
D
U
P
F
O
R
WA
L
L
U
S
E
F
O
R
D
E
S
K
U T
S
H
E I
S
E
N
D
U
P
R E L E A S E
P U S H
R E L E A S E
P U S H
3. Connect the Power Cord
O
T
O
T
Insert the right angle plug of the POWER
CORD into the POWER JACK on the back of
the telephone. Let the POWER CORD run
down the center of the telephone back.
PRESS
IN TABS
Note: Do not plug POWER SUPPLY into wall
outlet until all other steps are completed.
POWER VDC
NE LINE
4. Connect the Short Telephone Line Cord
Plug either end of the SHORT TELEPHONE
LINE CORD into the PHONE LINE JACK on
the back of the telephone.
5. Install the Base Plate so that the Arrows
Face Upward
Position the POWER CORD and the SHORT
TELEPHONE LINE CORD to run through the
top notch in the BASE PLATE. Feed the
SHORT TELEPHONE LINE CORD through
the large opening in the back of the BASE
PLATE. Snap the BASE PLATE into the lower
set of tab openings in the base of the
telephone, making sure the POWER CORD
runs through the bottom notch in the BASE
PLATE.
THIS END UP
FOR WALL MOUNT
T
H
I
S
E
N
D
U
P
F
O
R
WA
L
L
U
SE
F
O
R
D
E
S
K
U T
S
H
E I
S
E
N
D
U
P
R E L E A S E
P U S H
R E L E A S E
P U S H
O
T
O
T
12
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION – WALL MOUNT
•
•
•
•
•
•
•
6. Connect the other end of the short
telephone line cord to the wall phone
jack.
7. Mount the Telephone to the Wall Plate
Position the TELEPHONE against the WALL
JACK plate so that pins of the plate align
with key hole slots on the BASE PLATE.
Press the TELEPHONE against the WALL
JACK PLATE so that pins pass through key
hole slots in the BASE PLATE. Gently guide
the TELEPHONE downward to secure the
TELEPHONE to the WALL JACK PLATE.
Note: Be certain that the AC POWER CORD
and the TELEPHONE LINE CORD stay clear
of the pins of the WALL JACK PLATE and
the keyhole slots on the BASE PLATE.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ANSWERPHONE
VOICE TIME/DAY STAMP
MEMO
MESSAGE RESET PLAY•STOP
ANSWER ON/OFF
8. Connect the Coiled Cord
FLASH
REDIAL
EMERGENCY
Plug one end of the COILED CORD to the
HANDSET and plug the other into the
HANDSET JACK. Place the HANDSET in
the CRADLE.
MESSAGES
MEMORY
STORE/IN
DIAL
ABC
JKL
DEF
1
1
2
5
8
0
3
6
9
#
2
3
4
GHI
MNO
4
7
5
6
PRS
TUV
WXY
7
8
9
OPER
9. Lift cassette compartment door and
insert microcassette tape A side up.
10. Plug in the Power Supply
Plug the POWER SUPPLY into the AC
power outlet.
T O STORE TELEPHONE
NUMBERS IN MEMORY
ANNOUNCEMENT
1. LIFT HANDSET
2. PRESS STORE/IN
3.
M-C30
4. PRESS STORE/IN
HOUR
5. PRESS MEMORY
LOCATION
MINUTE
Lift the HANDSET to check for dial tone.
Your installation is complete.
Note: During power outages the Answering
system will not function even through battery
is installed. The telephone, however, will
remain operational.
DA
Y
TIM
E
C
H
E
C
K
6.WRITE NAME ON
MEMORY CARD
MEMO
MESSAGE RESET PLAY•STOP
ANSWER ON/OFF
13
Download from Www.Somanuals.com. All Manuals Search And Download.
TELEPHONE OPERATION
The GE Model 2-9892 Answer-PhoneTM provides normal
telephone operation along with storage of up to twelve
telephone numbers in memory for automatic dialing of
frequently called or emergency numbers.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
A. Introduction
1. The PULSE/TONE Switch
B. Important
Features to
Note
The PULSE/TONE switch located on the side of the unit
should be set to the proper position. The switch should be
set to TONE if you have “touch–tone” service. Otherwise, set
to PULSE.
Note: If one has a pulse service, the switch may be changed
to TONE after a call is made. This allows access to phone
services that require a tone. Return switch to PULSE when
call is completed.
HI
RINGER VOLUME
LO
OFF
ONE
T
PULSE
2. Ringer Volume
The RINGER VOLUME switch located on the side of the unit
can be set to the following:
HI – Maximum Volume
LO – Lower Volume
OFF – Ringer is not heard
To Make A Call
1. Pick up HANDSET.
2. Wait for dial tone.
3. Dial telephone number.
4. When finished, hang-up.
To Receive A Call
C. How to
Make and
Receive
Calls
1. When phone rings, pick up HANDSET and talk.
2. When finished, hang-up HANDSET.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
TELEPHONE OPERATION
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
The telephone automatically remembers the last number dialed
(up to 16 digits long). This number will remain in redial memory
until another number is dialed.
D. How to Use
Automatic
Redial
To Redial Last Number
1. Pick up HANDSET.
2. Wait for dial tone.
3. Press REDIAL.
Note: If any digit is pressed before REDIAL, the phone will
perform the PAUSE function. See Storing a Pause in Dialing.
MEMO
MESSAGE RESET PLAY•STOP
FLASH
REDIAL
MESSAGES
MEMORY
STORE/IN
DIAL
ABC
DEF
The momentary press of the FLASH button allows enhanced
features provided by the telephone company, such as call
waiting, to be used. If you subscribe to any of these services,
refer to the telephone company’s instruction on use.
E. How to Use
the Flash
Button
MEMO
MESSAGE RESET PLAY•STOP
FLASH
REDIAL
MESSAGES
MEMORY
STORE/IN
DIAL
ABC
DEF
15
Download from Www.Somanuals.com. All Manuals Search And Download.
TELEPHONE MEMORY OPERATION
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Your GE Model 2-9892 Answer-Phone has 12 memory locations
capable of storing a telephone number of up to 16 digits. Three
telephone numbers can be stored in the 3 Emergency/Quick
Dial positions and dialed with one touch. 9 Memory positions
are dialed with two touches (DIAL and the number button 1-9
corresponding to the memory location).
A. Introduction
Important: Before you begin storing telephone numbers in memory
you must set the PULSE/TONE switch to the correct
position.
B. How to
Store
Emergency/Quick Dial Numbers
MEMO
MESSAGE RESET PLAY•STOP
ANSWER ON/OFF
1. Pick up the HANDSET.
2. Push STORE/IN.
3. Enter the telephone number.
4. Push STORE/IN again.
5. Push selected Emergency Quick Dial location.
6. Hang up HANDSET.
7. Write the name or number of party stored in memory location on
DIRECTORY CARD.
Frequently Called Numbers
1. Pick up the HANDSET.
2. Push STORE/IN.
3. Enter the telephone number.
4. Push STORE/IN again.
5. Push a key pad number (1–9) for memory location.
6. Hang up the HANDSET.
7. Write the name or number of party stored in memory location on
DIRECTORY CARD.
FLASH
STORE/IN
1
REDIAL
EMERGENCY
MESSAGES
MEMORY
DIAL
ABC
JKL
DEF
1
2
3
4
2
5
8
0
3
6
9
#
GHI
MNO
4
7
5
6
PRS
TUV
WXY
7
8
9
OPER
How to Change a Stored Number
Repeat the storage sequence. The new number will replace the old
number at the memory location.
C. Changing or
Correcting a
Stored
How to Clear a Stored Number
Number
Repeat the storage sequence. skip step 3 in the sequence (i.e. do not
enter a telephone number). The storage location will be blank when
sequence is completed.
How to Correct an Error while Storing
Simply hang up and repeat the procedure for storing from the beginning.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
TELEPHONE MEMORY OPERATION
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
When storing a number, a momentary delay may be needed in
the dialing sequence for a stored telephone number. This is
generally used when a “PAUSE” is needed to wait for a dial tone
(e.g. after dialing a long distance access number). The REDIAL
button should be pressed at the point where a pause is needed
in the dialing sequence. During storage, pushing the REDIAL
button serves to store a pause in the dialing sequence as often
as needed.
D. Storing a
Pause in
Dialing
MEMO
MESSAGE RESET PLAY•STOP
FLASH
REDIAL
MESSAGES
MEMORY
Note: Each pause counts as one digit in the sequence.
Example: 123 REDIAL 456-789-0123
STORE/IN
DIAL
ABC
DEF
Emergency/Quick Dial Numbers
1. Pick up HANDSET.
2. Wait for Dial Tone
3. Press an Emergency Quick Dial button.
E. How to Dial a
Stored
Number
AGE RESET PLAY•STOP
ANSWER ON/OFF
Frequently Called Numbers in Memory
1. Pick up HANDSET.
2. Wait for Dial Tone
3. Press DIAL.
REDIAL
EMERGENCY
SAGES
MORY
DIAL
ABC
DEF
4. Press 1, or 2..., or 9.
This feature allows you to dial in succession a chain of numbers in
different memory locations. This is useful when you must dial
more than one number in memory to complete a call, such as with
frequent calls via an independent service (e.g. MCI or Sprint).
F. How to
Chain Dial
Using the
Memory
For Example
Memory Location
Local Access Number of Long
distance company, and 2 or 3
pauses at end, press...............................6
Authorization Code (ID), press................7
Long distance phone number, press........8
To initiate Chain Dialing
1. Press DIAL.
2. Press 6.
3. Press DIAL.
4. Press 7.
5. Press DIAL.
6. Press 8.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
ANSWERING SYSTEM OPERATION
Your GE Model 2-9892 Answer-PhoneTM provides an incoming
caller with your outgoing announcement and then records an
incoming message (from the caller).
The incoming call will be automatically answered on the third
ring. Because of the single microcassette operation, callers
must wait for the tape to fast forward past any previous
messages before they may leave their message. During this
time, a pleasant melody is played over the phone.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
A. Introduction
When you are at home, you can use your new system to:
• Answer calls when you cannot answer the telephone.
• Screen incoming calls when you do not want to be disturbed.
• Take messages from callers.
• Record memos directly using the unit’s built-in microphone.
The Answer-PhoneTM disconnects automatically if a calling party
hangs up or stops talking. The unit also places a time and day
stamp on each incoming message or memo.
When you are away, you can use any touch-tone phone to:
• Listen to messages.
• Bypass the announcement and leave a message quickly.
• Repeat your messages.
• Turn your answering system on.
• Change your announcement.
• Leave a memo
A three digit, factory-set security code is written on the bottom
of the Answer-PhoneTM. Your security code must be entered to
use any remote functions. This code prevents unauthorized use
of remote operation.
The Time and Date is added to the end of each message or
memo. Before using your new Answer-PhoneTM the time/day
stamp should be properly set.
B. Setting the
Time/Day
Stamp
1. Adjust VOLUME control to a comfortable level.
When you power-up the unit, the answerer is automatically
turned on.
PU
Open the DOOR to expose the Answer Controls.
2. To set hour.
HI
VOLUME
LO
Advance the hour by pressing and holding the HOUR button
until the VOICE announces the correct AM/PM hour.
3. To set minute.
Advance the minute by holding the MINUTE button. Voice
will announce minutes in five minute increments. Tap the
MINUTE button for 1 minute increments
18
Download from Www.Somanuals.com. All Manuals Search And Download.
ANSWERING SYSTEM OPERATION
•
4. To set day.
Advance the day by pressing and holding the DAY/TIME
CHECK button until the voice announces each day in
sequence.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Release the button at correct day.
ONE
ORY
5. Checking the Time/Day Stamp.
ANNOUNCEMENT
Tap the DAY/TIME CHECK button.
M-C30
The Voice will respond with the current time and day.
Note: A time check can be made at any time the answering
system is not playing.
HOUR
MINUTE
DAY
TIM
E
C
H
E
C
K
Important: If the Time/Day Stamp has not been set, the VOICE
system will announce the following during a time check: “12:00
AM Monday”.
MESSAGE RESET PLAY•STOP
ANSWER ON/OFF
Before using your new Answer-PhoneTM, you should record an
outgoing announcement (OGA). This is the announcement that
callers will hear when the system answers a call.
1. Prepare your announcement.
C. Recording
Your
Announce-
ment
Example: “Hello, I cannot come to the phone right now.
Please leave your name, telephone number, and message
after the tone. I will return your call as soon as possible.
Thank you.”
ANNOUNCEMENT
2. Hold down ANNOUNCEMENT button.
M-C30
HOUR
When tone sounds start recording your message by speaking
into the microphone. Speak clearly and close to the
microphone. Recording will stop when button is released and
another tone will sound.
MINUTE
DAY
TIM
E
C
H
E
C
K
SSAGE RESET PLAY•STOP
ANSWER ON/OFF
3. Tap ANNOUNCEMENT button to replay OGA.
Answer LED ON/OFF
• Continuously ON indicates system is in automatic answer
mode.
• Continuously OFF indicates system is off.
Answer LED Flashes
• Quick flashing indicates time lost after power failure and/or no
(OGA) Outgoing Announcement.
D. Answerer
LED
Indicators
MEMO
MESSAGE RESET PLAY•STOP
ANSWER ON/OFF
FLASH
REDIAL
EMERGENCY
Answer LED as a ready indicator
MESSAGES
MEMORY
STORE/IN
DIAL
• Continuously ON when recording (OGA) or Memo.
Answer LED as an IN-USE INDICATOR
• Blinking ON and OFF during incoming call recording and
during remote functions.
ABC
DEF
1
Message LED Flashes
• Number of flashes indicates number of messages recorded.
• Continuously OFF indicates no messages.
• Quick flashes indicates tape is full.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
ANSWERING SYSTEM OPERATION
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1. Pressing the ON/OFF button will turn on the answering
system, the ANSWER ON/OFF LED will light.
(Pressing ON/OFF button does not affect telephone
operation.)
2. Your Answer-PhoneTM is now ready to answer incoming calls,
play the Outgoing Announcement and record the caller’s
incoming messages.
E. Turning the
Answering
System On
or Off
AGE RESET PLAY•STOP
ANSWER ON/OFF
REDIAL
EMERGENCY
3. Pressing the ON/OFF button again will turn off the answerer
operation.
SSAGES
EMORY
DIAL
If your Answer-PhoneTM has recorded incoming messages
(including memos) the MESSAGES LED will flash once for each
message received followed by a brief pause.
To Play Incoming Messages
1. Press and release PLAY/STOP button.
• Unit will fast forward to incoming messages and start playing
back messages.
• Unit will play all messages and stop automatically after the
last message. Your Answer-PhoneTM is now ready for the
next call.
• Messages remain intact, even if new incoming messages
are received.
Note: Pressing PLAY/STOP button will not automatically clear
your messages or MESSAGE LED. To do so, press the
MESSAGE RESET button (see Message Reset section, page 21).
F. Playing the
Incoming
Message
MEMO
MESSAGE RESET PLAY•STOP
FLASH
REDIAL
MESSAGES
MEMORY
STORE/IN
DIAL
ABC
DEF
To Stop Playback
When in playback mode
• Press PLAY/STOP button again
To Repeat Playback
When in playback mode
• Press MEMO and HOLD DOWN until you have rewound
desired amount of tape.
When not in playback mode
• Press PLAY/STOP button.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
ANSWERING SYSTEM OPERATION
You can use the volume control on the side of the Answer-PhoneTM
to adjust the volume of the system’s speaker. Slide the switch until
you find a comfortable volume level.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
G. Message
Volume
Control
HI
VOLUME
LO
To screen calls, set the system to answer calls, and adjust the
VOLUME setting so you can hear the OGA and the caller’s
message on the Answer-PhoneTM’s built-in speaker.
If you decide to take the call, lift the handset of the Answer-
PhoneTM or any extension on the line. The system will
automatically stop recording and you may speak to the caller.
H. Screening
Your Calls
HI
VOLUME
LO
If you wish to get rid of your old messages and want to set the
tape to have new messages record over the old messages:
Press the MESSAGE RESET button.
• MESSAGE LED will clear
• New incoming messages will record over old messages on
the tape.
I. Message
Reset
MEMO
MESSAGE RESET PLAY•STOP
FLASH
REDIAL
MESSAGES
MEMORY
Press and hold down MEMO button. Start recording after the
tone. Speak into the microphone and release the MEMO button
when finished. The unit will record the time and day stamp and
the MESSAGES indicator will be advanced by one count.
J. Recording
a Memo
MEMO
MESSAGE RESET PLAY•STOP
FLASH
REDIAL
MESSAGES
MEMORY
When the system’s tape is full, the MESSAGES indicator will
flash rapidly. The unit will answer on the tenth ring, and beep
once. If the caller does not enter the unit’s (factory set three digit)
security code within ten seconds, the Answer-PhoneTM will hang
up. To make room for new messages, press PLAY/STOP to listen
to your messages, press MESSAGE RESET to erase them.
K. When Tape
is Full
MEMO
MESSAGE RESET PLAY•STOP
FLASH
REDIAL
MESSAGES
21
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE OPERATION
When you call your Answer-PhoneTM from another location using
a touch-tone phone, you must enter your three digit security
code. (This code is factory preset and written on the bottom of
the unit.) You then can listen to your messages or enter a
command to request one of the other features normally available
to you at home. For future reference write your three digit
security code in the spaces provided on your remote card found
in the fold out in this book.
Notes: Remote functions will not work with rotary, or push button
pulse dialing phones.
After a remote command is completed you will hear three short
beeps. You have ten seconds to enter a new command or hang
up.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
A. Introduction
You can press any key from a touch tone phone while the
outgoing message is playing to bypass the announcement. The
unit plays a melody then a transfer tone when bypassed. You
may leave a message or dial the three digit security code to
enter remote operations.
B. Outgoing
Announce-
ment (OGA)
Bypass
To Play Messages from a remote location
1. Dial phone number of Answer-PhoneTM.
C. Remote
Message
• After (OGA) unit will play a melody followed by a beep.
Playback
2. Dial three digit security code after beep.
• Unit will beep once and voice will say “PLEASE WAIT” then
unit will rewind to the beginning of the messages and play
them back.
3. Unit will beep three times when finished.
4. You will have ten seconds to enter another remote command
or hang up.
To Replay Messages
1. Press 2 to replay messages.
2. Unit rewinds tape.
3. Unit will play messages.
• Press 2 again while unit is playing to quit playback.
• Press 1 and hold to rewind, release to continue.
• Press 9 to fast forward, release to continue.
4. Unit will beep three times when finished.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE OPERATION
•
•
To Reset Incoming Message Tape
1. After hearing three short beeps Press 8 to reset.
2. Unit will beep three times.
D. To Reset
Incoming
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Message
3. Press 2 to replay messages and restore message count.
To Leave a Remote Memo
E. Remote
Memo
1. After hearing three short beeps Press 5.
2. Wait until you hear a beep, then speak.
3. Press 5 when finished.
4. Unit will stop recording.
5. Unit will beep three times.
To Record a New Outgoing Announcement
1. After hearing three short beeps Press 4.
2. Wait one second after beep, record new announcement.
3. Press 4 when finished.
4. Unit will stop recording and rewind.
• New announcement will automatically playback.
5. Unit will beep three times.
F. Remote
Announce-
ment
Change
23
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE OPERATION
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Leave your radio on? Your TV? Is someone in the area of your
Answer-PhoneTM? While away you can call your Answer-PhoneTM
to monitor the room in which the phone is located.
D. Remote
Room
Monitor
1. After hearing three short beeps Press 3.
2. Unit will turn on microphone for one minute then three beeps.
3. To continue listening Press 3.
4. To end Room Monitor Press 6.
If Tape is full, unit will beep after tenth ring
1. Dial three digit security code.
2. Unit will rewind and playback messages.
3. Unit will beep three times when finished.
4. You can dial a remote command or hang up.
H. Remote
Message
Playback if
Tape is Full
If the unit is in ANSWER OFF mode, unit will beep after tenth
ring.
To Turn Answer-PhoneTM on
1. After beep, dial three digit security code.
2. You can dial a remote command or hang up.
I. Remote ON
24
Download from Www.Somanuals.com. All Manuals Search And Download.
IN CASE OF DIFFICULTY
If your Answer-PhoneTM does not work properly, follow the Service Check List. If it is
still inoperative, then disconnect the Answer-PhoneTM and try another telephone to
determine if the problem is with the telephone line. If it is the telephone line, notify the
telephone company for service.
If the Answer-PhoneTM continues to malfunction, please make sure you have followed
all the instructions in this manual to correct the problem.
Refer to the service information on p. 31 of this guide if the problem cannot be
corrected and the Answer-PhoneTM must be disconnected.
TELEPHONE PROBLEM
SOLUTION
1. No Dial tone
• Check Cords to make sure they are inserted
correctly.
• Does HOOK SWITCH extend fully when
handset is removed from cradle?
2. Phone does not dial
• Check PULSE/TONE switch. Place in the
PULSE position.
3. You cannot be heard by other
party
• Check that handset coil is fully inserted at
both ends.
4. Memory Dialing Problems
• Did you program number correctly?
• Did you follow the proper dialing sequence?
5. Incoming and Outgoing voice
volume is too low
• Check that other phones are off hook at the
same time. If so, this is a normal condition as
volume drops when additional phones are
used at once.
• Is RINGER SELECT set to OFF position?
6. Phone does not ring
• Are you using too many phones on one line?
(The total REN of all phones should not be
greater than the maximum REN for your
calling area. Usually 5.)
7. Tone Feedback Flutter while
dialing in pulse mode
• This is normal as power is fluctuating with
phone out-pulsing.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
IN CASE OF DIFFICULTY
ANSWERER PROBLEM
SOLUTION
1. Tape won’t go in.
• Unplug the DC power cord and plug it in again.
Wait for unit to stop. Then, insert tape. Unplug
DC power cord.
2. Power was applied without tape
installed
Then plug it in again. (This resets the unit).
3. Answer indicator flashes rapidly
and there are no new messages
• Record new Outgoing Announcement.
• If problem recurs, clean heads.
• Is Answerer switched ON? Press Answer
ON/OFF switch.
4. Answer ON/OFF is not on
• Is the DC Adapter inserted properly and securely
into working AC outlet?
5. Unit will not function when I press
any buttons.
• If tape is running, wait for tape to finish rewind.
Note: Do not plug unit in without tape installed.
• Unplug AC power cord. Then plug it in again.
(This resets the unit.)
6. The unit does not function.
However, Beep sounds and Call
Counter flashes.
• Replace tape and unplug and then plug in DC
power cord. (This resets the unit).
• If tape is running, wait for tape to finish rewind.
Note: Do not plug unit in without tape installed.
7. The unit does not record Incoming
messages
• Is tape inserted properly?
• Does tape appear damaged? If so, replace.
• Is Outgoing Message recorded properly?
8. Sound level of Messages played
back is low
• Turn Volume Control up.
• Clean the head and capstan assembly
9. Outgoing Announcement does not
stop and no incoming message is
recorded
• Re-Record Outgoing Announcement.
• Clean the head and capstan assembly
REMOTE OPERATION
PROBLEM
SOLUTION
1. System does not respond to
commands
• Check to make sure you are using Touch-Tone
phone.
• Start entering codes before ten second time-out.
• Enter correct three digit security code.
• Press dial buttons firmly. (There may be noise
interference on the phone lines.)
2. System doesn’t answer until the
tenth ring.
• Answerer is turned off.
• Enter three digit security code to turn on (p. 24).
• If tape is full, enter Security Code, then listen to
and delete messages to make room for more
messages (p. 24).
26
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT CARE and SERVICE
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
A consumer replaceable long-life Lithium Batter (3V) is installed
in the phone to provide back-up power for retaining numbers in
memory. The LITHIUM BATTERY COMPARTMENT is located on
the bottom of the TELEPHONE BASE.
A. To Replace
Backup
Battery
1. Unplug the power supply and unplug PHONE LINE from
telephone outlet.
2. Unsnap the battery door
• Using a screwdriver, insert in opening at either end of
BATTERY CARTRIDGE, pop it up, lift BATTERY out.
Dispose of BATTERY CARTRIDGE. When discarding
batteries, be sure to dispose of them in the proper manner,
according to your state and local regulations.
3. Replace battery cartridge and door
Note: CARTRIDGE can be inserted only one way.
4. Plug in the power supply and plug in the PHONE CORD
Note: Numbers in memory must be reprogrammed.
For your safety, please follow these simple precautions:
• Do not recharge, disassemble, mutilate, puncture, wet or
dispose of Battery in fire. Like other batteries of this type, if it is
burned or punctured, it could release toxic material which
could cause injury.
• Keep Battery out of reach of children.
• Replace only with GE Cat. #5-1923. Accessory Order Form
included in this guide.
B. Battery
Safety
Precautions
27
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT CARE and SERVICE
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Because the head and capstan assemblies are in contact with the
tape, dirt and residue from the tape can easily adhere to these
parts, causing distortion.
These parts should therefore be cleaned periodically by the
following manner.
C. Cleaning
Tape
Mechanism
PRESSURE
HEAD ROLLER
1. Remove Cassette from unit.
2. Clean the head surfaces, pressure rollers and capstans with a
cotton swab. If these surfaces are extremely dirty, dampen the
cotton swab with alcohol.
CAPSTAN
To keep your GE Telephone working and looking good, follow
these few simple rules:
• Avoid putting telephone near heating appliances to other high
temperature sources.
• Try to avoid placing telephone near devices that generate
electrical noise. (i.e., motors, fluorescent lamps.)
• Telephone should not be exposed to direct sunlight or
moisture.
• Avoid dropping the Handset and other rough treatment to the
phone.
D. General
Product
Care
ANSWERING
SYSTEM
• Clean telephone with a soft cloth dampened with water.
(Remember to first unplug phone from wall outlet)
• Never use a strong cleaning agent or abrasive powder, as this
will damage the finish.
O
I
L
• Retain the original packaging, should you need to ship the
phone at a later date.
• Do not bring magnetic or metal objects, such as a screwdriver,
near the head assemblies, as such objects could magnetize
the heads.
• Do not oil any part of the unit.
• When using liquid cleaner, unplug AC adapter from wall outlet
and allow 30 minutes drying time.
FCC requires this product be serviced only by the manufacturer
or its authorized service agents. In accordance with FCC
requirements, changes or modifications not expressly approved
by Thomson Consumer Electronics could void the user's
authority to operate this product. For instructions on how to
obtain service, refer to the warranty included in this Guide or call
consumer service, telephone number: 800-448-0329.
E. Service
Attach your sales receipt to the booklet for future reference or
jot down the date this product was purchased or received as a
gift. This information will be valuable if service should be
required during the warranty period.
Purchase date _______________________________________
Name of store _______________________________________
28
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSORY ORDER FORM
To fulfill your communicating needs and enhance
your lifestyle, a wide range of GE extension phones,
main phones, cordless phones, and answering systems
is available.
J ust stop by your nearest retailer and ask to see the
wide range of GE telephone products.
All are carefully engineered to offer you high quality
and dependability, modern easy-to-use features, and
elegant styling at an affordable price.
Should you wish to purchase, insist on the GE brand
for all your communicating needs.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2-9892
ACCESSORY ORDER FORM
TOTAL
CATALOG NUMBER
5-2332
DESCRIPTION
AC ADAPTER
PRICE EACH QUANTITY
$9.95
LITHIUM CARTRIDGE
LI/MNO2 CELL, 3 VOLT (CR2032)
For Models with “MEMORY STORE”
5-1923
$6.70
For credit card purchases
Prices are subject to change without notice.
Total Merchandise ................... $
Your complete charge card number, its
expiration date and your signature are
necessary to process all charge card orders.
Sales Tax................................. $
Copy your complete account number from
your VISA card
We are required by law to collect the appropriate
sales tax for each individual state, county, and
locality to which the merchandise is being sent.
Shipping, Handling, and
5.00
Insurance................................. $
My card expires:
Total Amount Enclosed............ $
Copy your complete account number from
your MasterCard
Use VISA or MasterCard preferably. Money order or
check must be in U.S. currency only. No COD or
CASH.
All accessories are subject to availability. Where
applicable, we will ship a superseding model.
Copy the number above your
name on the MasterCard
Prices are subject to change without notice.
Mail order form and money order or check (in
U.S. currency) made payable to Thomson
Consumer Electronics, Inc. to:
My card expires:
Consumer Electronics
Mail Order Department
P.O. Box 8419
Ronks, PA 17573-8419
Authorized Signature
This is your return label. Please print clearly.
To:
Name______________________________
Address____________________Apt._____
City_______________State_____ZIP_____
30
Please make sure that this form has been
Download from Www.Somanuals.com. All Manuals Search And Download.
filled out completely.
ONE YEAR LIMITED WARRANTY
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
What does your warranty cover?
• Any defect in material or workmanship.
For how long after the original purchase?
• One year.
• The warranty for rental units begins with the first rental.
What will we do?
• Provide you with a new, or at our option, a refurbished unit.
• The exchange unit is warranted for the remainder of your product’s
original one-year warranty period.
How do you make a warranty claim?
• Properly pack your unit. Include any cables, etc., which were
originally provided with the product. We recommend using the
original carton and packing materials.
• Include in the package a copy of the sales receipt or other
evidence of date of original purchase. If the unit was a gift, provide
a statement specifying the date received. Also print your name and
address and a description of the defect.
• Ship the unit standard UPS or equivalent to:
Thomson Consumer Electronics, Inc.
Product Exchange Center
32 Spur Drive
El Paso, Texas 79906
• Pay any charges billed to you by the Exchange Center for service
not covered by the warranty.
• A new or refurbished unit will be shipped to you prepaid freight.
What does your warranty not cover?
• Customer instruction. Your Owner's Manual provides information
regarding operating instructions and user controls. For additional
information, ask your dealer.
• Installation and set-up service adjustments.
• Batteries.
• Damage from misuse or neglect.
• Products which have been modified or incorporated into other
products.
• Product purchased or serviced outside the USA.
How does state law relate to this warranty?
• This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
What if you purchased your product outside the United States?
• This warranty does not apply. See your dealer for details.
Thomson Consumer Electronics, Inc.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC REGISTRATION INFORMATION
Your GE telephone equipment is registered with the Federal Communications Commission and is in compliance with parts
15J and 68, FCC Rules and Regulations.
1. Notification to the Local Telephone Company
On the bottom of this equipment is a label indicating among other information, the FCC Registration number and Ringer
Equivalence Number (REN) for the equipment. You must, upon request, provide this information to your telephone
company.
The REN is useful to determine the number of devices you may connect to your telephone line and still have all these
devices ring when your telephone number is called. In most (but not all) areas, the sum of the REN's of all devices
connected to one line should not exceed 5. To be certain of the number of devices you may connect to your line as
determined by the REN, you should contact your local telephone company.
NOTES: This equipment may not be used on coin service provided by the telephone company.
Party lines are subject to state tariffs, and therefore, you may not be able to sue your own telephone equipment if you
are on a party line. Check with your local telephone company.
Notice must be given to the telephone company upon permanent disconnection of your telephone from your line.
2. Rights of the Telephone Company.
Should your equipment cause trouble on your line which may harm the telephone network, the telephone company shall,
where practicable, notify you that temporary discontinuance of service may be required. Where prior notice is not
practicable and the circumstances warrant such action, the telephone company may temporarily discontinue service
immediately. In case of such temporary discontinuance, the telephone company must: (1) promptly notify you of such
temporary discontinuance, (2) afford you the opportunity to correct the situation and (3) inform you of your right to bring a
complaint the the Commission pursuant to procedures set forth in Subpart E of part 68, FCC Rules and Regulations.
The telephone company may make changes in its communications facilities, equipment, operations of procedures where
such action is required in the operation of its business and not inconsistent with FCC Rules and Regulations. If these
changes are expected to affect the use or performance of your telephone equipment, the telephone company must give
you adequate notice, in writing, to allow you to maintain uninterrupted service.
INTERFERENCE INFORMATION
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) This device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can de determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is “receiving” the interference).
• Reorient or relocate and increase the separation between the telecommunications equipment and receiving antenna
• Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna is
connected
• Consult the dealer or an experienced radio/TV technician for help.
If these measures do not eliminate the interference, please consult your dealer or an experienced radio//television
technician for additional suggestions. Also, the Federal Communications Commission has prepared a helpful booklet, “How
To Identify and Resolve Radio/TV Interference Problems”.This booklet is available from the U.S. Government Printing
Office, Washington, D.C.20402. Please specify stock number 004-000-00345-4 when ordering copies.
HEARING AID COMPATIBILITY
This telephone system meets FCC standards for Hearing Aid Compatibility.
Model 2-9892B
347A7427-B001 (Rev,1)
94-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in Singapore
OPTIONS AFTER TOUCH TONE
3 BEEP SIGNAL
Bypass Announcement
Play Messages
COMMAND
TM
ANSWER-PHONE
MODEL 2-9892
ANY KEY
Security Code
1
Dial telephone number and wait
for system to answer.
Start Stop
Repeat Message
2
2
Security Code
Play Messages if
Tape is Full (After Tenth Ring)
2Press any key for OGA
(Outgoing Announcement) bypass.
8
Incoming Message Reset
Record Memo
Start Stop
Enter 3-digit security code
3
5
5
after transfer tone.
Start Stop
Record Announcement
Room Monitor
4
4
4
Listen for messages or,
Start Stop
Enter Touch Tone Command.
3
6
Security Code
Turn System On
(After Tenth Ring)
Hang up.
5
Rewind
1
9
(During Message Play)
Fast Forward
(During Message Play)
Write 3-digit security code in boxes.
OPTIONS AFTER TOUCH TONE
3 BEEP SIGNAL
Bypass Announcement
Play Messages
COMMAND
TM
ANSWER-PHONE
MODEL 2-9892
ANY KEY
Security Code
1
Dial telephone number and wait
Start Stop
for system to answer.
Repeat Message
2
2
Security Code
Play Messages if
Tape is Full (After Tenth Ring)
2Press any key for OGA
(Outgoing Announcement) bypass.
8
Incoming Message Reset
Record Memo
Start Stop
Enter 3-digit security code
3
5
5
after transfer tone.
Start Stop
Record Announcement
Room Monitor
4
4
4
Listen for messages or,
Start Stop
Enter Touch Tone Command.
3
6
Security Code
Turn System On
(After Tenth Ring)
Hang up.
5
Rewind
1
9
(During Message Play)
Fast Forward
(During Message Play)
Write 3-digit security code in boxes.
Download from Www.Somanuals.com. All Manuals Search And Download.
|