Connect the USB cable, ADF cable, and power cable
Quick Installation Guide
4
Before connecting the scanner, be sure to turn off the PC and
the scanner.
Caution
Refer to the "fi-4010CU Image Scanner Operator's Guide" when you would
like to know more about the scanner.
Refer to the "Scanner Utility for Microsoft Windows User's Guide" on the
Scanner driver CD-ROM when you would like to know more detailed information
about the FUJITSUTWAIN32 Scanner driver installation.
Carefully read the "fi-4010CU Image Scanner
Operator's Guide" before using this product.
Particularly read and understand the "Safety Precautions"
before using this product.
R
R
1. Insert smaller connector of the USB cable(the one with a core) to the USB conector
USB connector
ADF cable connector
on the back side of the scanner.
2. Connect the other end of the USB cable to the PC.
ADF cable
3. Connect the ADF cable to the ADF cable connector of the scanner, and fix the thumb
screws of the ADF cable connector.
4. Connect the power cable to the AC adapter and connect the AC adapter to the AC
Check the scanner and accessories
AC adaptor connector
1
adapter connector of the scanner.
5. Insert the power cable to the power outlet.
Confirm that all of the following items are included.
Power cable
USB cable
Connect to your PC.
Connect to the power outlet.
Document stopper
ADF paper chute A
Pad ASY
ADF paper chute B
USB cable
Scanner
Adobe R Acrobat R 5.0
CD-ROM
Manual CD-ROM
fi-4010CU Image Scanner
Operator's Guide
Install FUJITSU TWAIN32 Scanner driver
WindowsR 98, WindowsR Me, WindowsR 2000, WindowsRXP
5
AC cable
AC adapter
fi-4010CU Quick Installation Guide
Scanner driver CD-ROM
Be sure to install the TWAIN data source after installing the mini-driver.
Caution
If the old version of FUJITSU TWAIN32 Scanner driver has been installed on your personal computer, refer to the
2
"Scanner Utility for MicrosoftR WindowsR User's Guide" on the Scanner driver CD-ROM, and update the mini-driver.
Release the Shipping Lock
The WindowsR XP screen samples are shown below. The screen
and operations will differ slightly depending on the OS that is being
used.
Lock
Shipping Lock
4. Insert the Scanner driver CD-ROM
When automatic start has been set, the "SETUP DISK
1. Raise the scanner carefully upward so that bottom side of
Slide the Shipping Lock to "Unlock"
position.
the scanner faces towards you.
Preparation
Caution
START UP SCREEN" is displayed.To close this screen,
click the [Exit] button on this screen.
2. Slide the lock switch to "Unlock" position to release the
Confirm that the Scanner is connected to your personal computer
with the USB cable.
lock.
5. Select "Find the most suitable
driver in the next location".
Check "Include the next
location" then specify
Installing the mini-driver
1. Turn on the power by pushing the power switch in the back of the
scanner.
D:\Driver2 (When your CD-
ROM is the D drive). After that
click [Next].
The power lamp lights.
2. Turn on your personal computer and log on to WindowsR.
When using WindowsR 2000 or WindowsR XP log on as an
administrator . The "Found New Hardware Wizard" dialog box is
displayed.
Unlock
For WindowsR 98, just check "Specify search location" then specify
D:\Driver2 (When your CD-ROM is the D drive). After that click
[Next].
3. Check "Install from list or
specified location", then click
[Next].
For WindowsR Me, select "Find the most suitable driver for the
device being used" then click [Next]. Check "Specify search location"
then specify D:\Driver2 (When your CD-ROM is the D drive). After
that click [Next].
Attach the ADF paper chute and Document stopper
3
Flip out part
ADF paper chute B
Document stopper
1. Attach the ADF paper chute A to the ADF unit so that the side guide of the
For WindowsR 2000, just check "Specify location" and then in the
next screen specify "Copy source for origination file" then specify
D:\Driver2 (When your CD-ROM is the D drive), then click [OK].
ADF paper chute faces up.
2.Attach the ADF paper chute B to the ADF paper chute A so that the flip out of
For WindowsR Me check "Specify the driver location", then click
[Next].
part of the ADF paper chute B faces up.
For WindowsR 2000 and WindowsR 98, clicking on [Next] the select
search method screen is displayed.
3.Insert the clows of the document stopper into the slots of the scanner. Slide the
• For WindowsR 98 select "Find the most suitable driver for the
device being used" then click [Next].
document stopper in the direction of the arrow marked on it to fix the stopper.
• For WindowsR 2000 select "Find the most suitable driver for the
device" then click [Next].
ADF paper chute A
Continued on next page
Download from Www.Somanuals.com. All Manuals Search And Download.
P3PC-E117-01EN
|