baTTery driveN, FTP-608 series
2” high sPeed TherMaL PriNTer
FTP-628MCL401/451
n Overview
The FTP-628 MCL Series are battery driven high-speed
printers with a 2-inch paper width equivalent.
The FTP-628 MCL Series can be used for a variety of
applications, such as portable terminals, POS, banking
terminals, and measurement and medical equipment.
n highLighTs
• Ultra low profile
Height 2ꢀ.8 mm, width 8ꢀ.2 mm, depth 42.2 mm
FTP-628MCL40ꢀ
• High speed printing
It can print at 60 mm/s (480 dotlines/s) maximum by using
Fujitsu's unique head drive control.
• Auto Cutter
Full cut type and partial cut type printers are available by
user selection.
• Easy paper setting
Our unique platen release mechanism allows a
wide paper route even if the printer is ultra-compact, so
paper can be easily inserted. Conventional auto loading is
also available.
• Multifunctional die-cast form
FTP-628DSL49ꢀR
Wide operating temperature range, long continuous
printing, high ESD absorbtion and discharge of static
electricity vibration and shock resistant.
• RoHS compliant
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-628MCL401/451
n sPeCiFiCaTiONs
Item
Specification
Interface
Conforms to RS232C / Centronics
4.2 - 8.5 VDC average current, 1.8 (2.4)A at 7.2V
(print ratio: 12.5%, print speed: 60mm/sec. )
For print head
Power
supply
For motor
4.2 - 8.5 VDC, 1A maximum
4.75 - 8.5 VDC, 1A maximum
5 VDC 5%, 0.1 A maximum
81.2 x 42.2 x 21.8 mm (WxDxH)
70 x 60 x12 mm
For cutter motor
For logic
Mechanism with cutter
Interface board
Mechanism with cutter
Interface board
Dimensions
Weight
Approximately 97g
Approximately 25g
Pulse resistance: 100 million pulses/dot (under our standard
conditions); Abrasion resistance: paper traveling distance 50km
(print ratio: 12.5% or less)
Head
Life
Cutter
500,000 cuts
Platen
5,000 times (open/close)
0
Operating temperature*
Operating humidity
Storage temperature
Storage humidity
˚ C to 50˚ C
20 to 85% RH (no condensation)
-20˚ C to +60˚ C (paper not included)
5 to 95% RH (no condensation)
Operating
environment
Head temperature
detection
Detected by thermistor
Detection
function
Paper out/mark detection Detected by photo-interrupter
Platen release
Movable blade
Detected by sliding switch
Detected by photo-interrupter
High Sensitive Paper TF50KS-E4 (Nippon Paper)
Standard paper:
Medium Life Paper
Long Life Paper
TF60KS-E(Nippon Paper), FTP-
020PU001 (58mm), PD105R (Oji Paper),
FTP-020P0701 (58mm)
TF60KS-F1, FTP-020P0102 (58mm),
PD170R (Oji Paper), P220VBB-1
Mitsubishi Paper)
Recommended thermal sensitive paper
PD160R-N (Oji Paper), AFP-235
(Mitsubishi Paper), TP50KJ-R (Nippon
Paper), HA220AA (Nippon Paper)
*+5˚C to +40˚C printing density assurance rance (-25 to 70˚C capability)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-628MCL401/451
n FuNCTiON OF iNTerFaCe bOard
Item
Item
ꢀ. Test print function
8.
9.
Cutter trouble detect
2. Paper out detection
Motor power saving function
3. Paper near end detection
4. Platen open detection
ꢀ0. Mark detection function
ꢀꢀ. MCU operation abnormality detection
ꢀ2. Power ON/OFF sequence protection
ꢀ3. Motor over-current protection
ꢀ4. Hardware timer
5. Thermal head temperature abnormality detection
6. Blow-out fuse detection
7. Head voltage abnormality detection
n diMeNsiONs
1. Printer mechanism
FTP-628MCL40ꢀ
printer
7.5
cutting position
printer position standard
platen center
lever
platen unit
paper
8ꢀ.2
ꢀꢀ
10.7
platen unit
2ꢀ.8
Unit: mm
Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specified).
2. Platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is
open.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-628MCL401/451
1. Printer mechanism
FTP-628MCL45ꢀ
5
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-628MCL401/451
2. Interface board
(70.0)
63.5
3.25
3.25
50.5
25.5
ꢀ.45
ꢀ
30
CN3
ꢀ
8
CN4
3-Ø3.2
FGØ3.2
CN7
CN2
ꢀ
8
ꢀ
6
ꢀ.25
17.5
49.5
Mounting height
Mounting height
Note:
ꢀ. The size with parentheses is a reference value.
2. Part mounting height is maximum.
Unit:mm
6
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-628MCL401/451
FTP-628MCL401 mechanism/cutter FPC PIN Assignment
(ꢀ) For thermal head, motor and sensor
Connector on control circuit: 526ꢀ0-3090 (Molex or equivalent)
No
1
Signal
Content s
PHK
VSEN
PHE
VH
Cathode for photo interruptor
paper sensor power
Emittor for photo interruptor
2
3
4
Head drive power
5
VH
6
DI
Data in
Clock
7
CLK
GND
GND
8
Head ground
9
10 STB6
11 STB5
12 STB4
13 Vdd
14 TM
Strobe 6
Strobe 5
Strobe 4
Logic power
Thermistor
15 TM
16 STB 3
17 STB 2
18 STB 1
19 GND
20 GND
21 LAT
22 DO
Strobe 3
Strobe 2
Strobe 1
Head ground
Data latch
Data out
23 VH
Head drive power
24 VH
25 SW
Platen release switch
36 SW
27 MT/A
28 MT/A
29 MT/B
30 MT/B
Excitation signal A
Excitation signal A
Excitation signal B
Excitation signal B
7
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-628MCL401/451
FTP-628MCL451 mechanism/platen bracket FPC PIN Assignment
(ꢀ) For thermal head, motor and sensor
Connector on control circuit: 526ꢀ0-3090 (Molex or equivalent)
No
1
Signal
Content s
PHK
VSEN
PHE
VH
Cathode for photo interruptor
paper sensor power
Emittor for photo interruptor
2
3
4
Head drive power
5
VH
6
DI
Data in
Clock
7
CLK
GND
GND
8
Head ground
9
10 STB6
11 STB5
12 STB4
13 Vdd
14 TM
Strobe 6
Strobe 5
Strobe 4
Logic power
Thermistor
15 TM
16 STB 3
17 STB 2
18 STB 1
19 GND
20 GND
21 LAT
22 DO
Strobe 3
Strobe 2
Strobe 1
Head ground
Data latch
Data out
23 VH
Head drive power
24 VH
25 SW
Platen release switch
36 SW
27 MT/A
28 MT/A
29 MT/B
30 MT/B
Excitation signal A
Excitation signal A
Excitation signal B
Excitation signal B
8
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-628MCL401/451
(2) For cutter
Connector on control circuit: 526ꢀ0-0890 (Molex or equivalent)
No
1
Signal
Content s
VSEN
PHE
Home position sensor power
Emittor for photo interruptor
Cathode for photo interruptor
Excitation signal A
2
3
PHK
4
MT/A
MT/A
MT/B
MT/B
5
Excitation signal A
6
Excitation signal B
7
Excitation signal B
8
NC
Not connected
Sensor (Photo-
interruptor)
Platen unit
Thermal head
Motor
FPC
Connect terminal:
surface side
Connector No
(FPC pin
30,29,
Fujitsu Components International Headquarter Offices
Japan
Europe
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo ꢀ4ꢀ, Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2ꢀ32 WV Hoofddorp, The Netherlands
Tel: (3ꢀ-23) 55609ꢀ0
Tel: (81-3) 5449-7010
Fax: (3ꢀ-23) 5560950
Fax: (8ꢀ-3) 5449-2626
Email: [email protected]
Email: [email protected]
Web: emea.fujitsu.com/components/
Asia Pacific
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fujitsu Components Asia Ltd.
ꢀ02E Pasir Panjang Road
#0ꢀ-0ꢀ Citilink Warehouse Complex
Singapore ꢀꢀ8529
Tel: (65) 6375-8560
Fax: (1-408) 745-4970
Fax: (65) 6273-3021
Email: [email protected]
Email: [email protected]
©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners.
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its
affiliates reserve the right to change specifications/datasheets without prior notice.
Rev. August 17, 2007
9
Download from Www.Somanuals.com. All Manuals Search And Download.
|