Fujitsu Laptop S7020 User Manual

Fujitsu LifeBook  
S Series  
BIOS Guide  
LifeBook S Series Model:  
S7020  
Document Date: 10/28/2005  
Document Number: FPC58-1443-01  
F U J I T S U C O M P U T E R S Y S T E M S  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
M a i n M e n u  
3. If an error message is displayed on the screen, and  
you want to enter the setup utility, press the [F2] key.  
4. When the setup utility starts with a fault present, the  
system displays the following message:  
Warning!  
Error message  
[Continue]  
5. Press any key to enter the setup utility. The system  
will then display the Main Menu with current  
parameters values.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
S
S e r i e s N o t e b o o k B I O S  
MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS  
The Main Menu allows you to set or view the current  
system parameters. Follow the instructions for Navi-  
gating Through The Setup Utility to make any changes.  
(See Navigating Through the Setup Utility on page 2 for  
more information)  
the field’s function and any special information needed  
to help understand the field’s use. Note that the actual  
drive labels shown may vary.  
System time and date can also be set from  
your operating system without using the  
setup utility. Use the Date and Time icon  
on your Windows Control panel or type  
time or date from the MS-DOS prompt.  
The following tables show the names of the menu fields  
for the Main menu and its submenus, all of the options  
for each field, the default settings and a description of  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Boot  
Info  
Exit  
Item Specific Help  
System Time:  
System Date:  
[02:34:56]  
[10/24/2005]  
Adjust calendar clock.  
Serial ATA Port 0 [FUJITSU MHT2080BH-SATA]  
Primary Master  
[MATSHITADVD-RAM UJ-841S-(PM)]  
<Tab>, <Shift-Tab>, or  
<Enter> selects field.  
Language:  
[English (US)]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 1. Main Menu  
Table 1: Fields, Options and Defaults for the Main Menu  
Menu Field  
Options  
Default  
Description  
System Time:  
–—  
–—  
Sets and displays the current time. Time is in a 24 hour format  
of hours:minutes:seconds with 2 digits for each. (HH:MM:SS).  
Example: 16:45:57. You may change each segment of the time  
separately. Move between the segments with the [Tab] key and/or  
[Shift] + [Tab] keys.  
System Date:  
–—  
–—  
Sets and displays the current date. Date is in a month/day/year  
numeric format with 2 digits each for month and day and 4 digits  
for year. (MM/DD/YYYY) for example: 03/20/1998. You may  
change each segment of the date separately. Move between the  
segments with the [Tab] key and/or [Shift] + [Tab] keys.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
M a i n M e n u  
Table 1: Fields, Options and Defaults for the Main Menu  
Menu Field  
Options  
Default  
Description  
Serial ATA Port 0:  
The product # of  
the Serial ATA/IDE  
Drive  
Display the type of device on this ATA/ATAPI interface, if there is  
one. Pressing the Enter key selects the Serial ATA Port 0 submenu  
allowing additional device configuration options for this interface.  
Selects the Serial  
ATA Port 0  
submenu.  
Primary  
Master:  
Selects Primary  
Master submenu  
The product # of  
the Hard Drive  
Display the type of device on this ATA/ATAPI interface, if there is  
one. Pressing the Enter key selects the Primary Master submenu  
allowing additional device configuration options for this interface.  
Language:  
English (US)  
Japanese (JP)  
[English (US)]  
The default setting differs between the US/European and the  
Japanese model. Selects the display language for the BIOS.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
S
S e r i e s N o t e b o o k B I O S  
Serial ATA Port 0 Submenu of the Main Menu  
The Serial ATA Port 0 submenu identifies what Serial  
ATA/IDE devices are installed.  
Note that actual hard drive label shown may vary.  
Depending on the drive type, information such as cylin-  
ders, heads and sectors may also be displayed.  
PhoenixBIOS Setup Utility  
Main  
Serial ATA Port 0 [FUJITSU MHT2080BH-SATA]  
Item Specific Help  
Type:  
[Auto]  
LBA Format  
Select Serial ATA/IDE  
drive installed here.  
Total Sectors:  
156301488  
80026MB  
[Auto]  
The BIOS auto-types the  
drive on boot time.  
Maximum Capacity:  
[None]  
The drive is disabled.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 2. Serial ATA Port 0 Submenu  
Menu Field  
Options  
Default  
Description  
Type:  
Auto  
None  
[Auto]  
Select Auto to have the type of Serial or Parallel ATA device auto-  
matically identified by the BIOS at POST. If None is selected, the fol-  
lowing Set-up items do not appear.  
LBA Format  
Logical Block Addressing (LBA)  
Total Sectors:  
---  
---  
The total number of sectors on your hard disk  
---  
---  
Maximum  
Capacity:  
The maximum capacity of your hard disk  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
M a i n M e n u  
Primary Master Submenu of the Main Menu  
The Primary Master submenu identifies what primary  
devices are installed.  
Note that actual hard drive label shown may vary.  
Depending on the drive type, information such as cylin-  
ders, heads and sectors may also be displayed.  
PhoenixBIOS Setup Utility  
Main  
Primary Master [MATSHITADVD-RAM UJ-841S-(PM)]  
Item Specific Help  
Type:  
[Auto]  
Select ATA/ATAPI drive  
installed here.  
Multi-Sector Transfers:  
LBA Mode Control:  
Transfer Mode:  
[Disabled]  
[Disabled]  
[Standard]  
[Disabled]  
[Auto]  
The BIOS auto-types the  
drive on boot time.  
Ultra DMA Mode:  
[None]  
The drive is disabled.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 3. Primary Master Submenu  
Table 3: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu  
Menu Field  
Options  
Default  
Description  
Type:  
Auto  
None  
[Auto]  
Selects the ATA/ATAPI device type. Select Auto to have the device (CD-  
ROM, CD-R/RW, DVD-ROM, etc.) automatically identified by the BIOS  
at POST. If None is selected, the following Set-up items do not appear.  
Multi-Sector  
Transfers:  
Disabled  
2 Sectors  
4 Sectors  
8 Sectors  
[Disabled]  
[Disabled]  
This option cannot be changed when Auto is selected. Specify the num-  
ber of sectors per block for multiple sector transfer.  
16 Sectors  
LBA Mode  
Control:  
Disabled  
Enabled  
Enables or disables Logical Block Addressing in place of Cylinder, Head,  
Sector addressing. This option cannot be changed when Auto is selected.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
S
S e r i e s N o t e b o o k B I O S  
Table 3: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu  
Menu Field  
Options  
Default  
Description  
Transfer Mode:  
Standard  
Fast PIO 1  
Fast PIO 2  
Fast PIO 3  
Fast PIO 4  
Multiword DMA 1  
Multiword DMA 2  
[Standard]  
Selects the method for moving data to/from the drive. Autotype the  
drive to select the optimum transfer mode. This option cannot be  
changed when Auto is selected.  
Ultra DMA  
Mode:  
Disabled  
Mode 0  
Mode 1  
Mode 2  
Mode 3  
Mode 4  
Mode 5  
[Disabled]  
Selects the method for moving data to/from the drive. Autotype the  
drive to select the optimum transfer mode. This option cannot be  
changed when Auto is selected.  
A bootable CD-ROM may have either a floppy disk or hard drive format. When the bootable CD-ROM is  
used, the drive allocations change automatically without changing the BIOS setup. If a floppy disk format  
CD-ROM is used, the CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive for-  
mat) if the internal hard drive is not present or is disabled. The bootable CD-ROM can never use a C: des-  
ignation if a formatted internal hard drive is present since the C: designator is always reserved for the  
internal hard drive. The boot sequence ignores the new drive designations, however, your application  
software will use the new designations.  
Be aware of the operating environment when booting from a CD-ROM or you may overwrite files by  
mistake.  
Exiting from Main Menu  
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to  
another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit  
menu or to move to another menu.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
M a i n M e n u  
ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS  
The Advanced Menu allows you to:  
Follow the instructions for Navigating Through the  
Setup Utility to make any changes.  
Set the I/O addresses for the serial and parallel ports.  
Set the features of the keyboard/mouse.  
Select between the display panel and/or an external  
(See Navigating Through the Setup Utility on page 2 for  
more information)  
CRT display.  
Set internal device configurations  
Configure USB and CPU features.  
Configure miscellaneous features such as Wake Up On  
The following tables show the names of the menu fields  
for the Advanced Menu and its submenus, all of the  
options for each field, the default settings and a descrip-  
tion of the field’s function, and any special information  
needed to help understand the field’s use.  
LAN.  
Configure DMI Event Logging.  
PhoenixBIOS Setup Utility  
Security Boot Info  
Main  
Advanced  
Exit  
Item Specific Help  
Serial/Parallel Port Configurations  
Keyboard/Mouse Features  
Video Features  
Configures serial ports  
and parallel ports  
Internal Device Configurations  
CPU Features  
USB Features  
Miscellaneous Configurations  
Event Logging  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 4. Advanced Menu  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
S
S e r i e s N o t e b o o k B I O S  
Table 4: Fields, Options and Defaults for the Advanced Menu  
Menu Field  
Description  
Serial/Parallel Port  
Configurations  
When selected, opens the Serial/Parallel Port Configurations submenu which allows the user to modify set-  
tings for serial, infrared and parallel ports.  
Keyboard/Mouse  
Features  
When selected, opens the Keyboard/Mouse Features submenu, which allows setting external and internal  
keyboard and mouse parameters.  
Video Features  
When selected, opens the Video Features submenu, which allows selecting between the display panel and/  
or an external CRT display or video projector.  
Internal Device  
Configurations  
When selected, opens the Internal Device Configuration submenu, which allows enabling or disabling the  
modem, IDE, and LAN Controllers.  
CPU Features  
USB Features  
When selected, opens the CPU Features submenu, which allows you to change the Intel(R) SpeedStep(R)  
Technology settings.  
Configures USB features.  
Miscellaneous  
Configurations  
Configures miscellaneous features, such as Wake Up On LAN and Power Button.  
Event Logging  
When selected, opens the event logging submenu.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A d v a n c e d M e n u  
Serial/Parallel Port Configuration Submenu of the Advanced Menu  
The Serial/Parallel Port Configuration submenu  
provides the ability to set the I/O addresses and  
interrupt levels for the serial, infrared, and parallel  
ports of your notebook.  
I/O addresses, DMA channels, and  
Interrupt levels can be entered in various  
ways, including via the BIOS setup utility,  
the control software for the I/O device, or  
the hardware. If any two ports or devices,  
serial or parallel, have the same I/O  
address assigned your notebook will not  
function normally. Please keep a record of  
original settings before making any  
changes in the event that a restoration is  
required. See your hardware and software  
documentation as well as the setup utility  
to determine settings, limitations, etc.  
To prevent IRQ and address conflicts,  
avoid changing the default settings. If  
you must change the settings, you can  
call 1-800-8Fujitsu for technical assis-  
tance.  
The BIOS will warn you of resource con-  
flicts by placing a yellow asterisk next to  
each device that is in conflict.  
All I/O addresses in Table 5 are in hexa-  
decimal.  
PhoenixBIOS Setup Utility  
Advanced  
Item Specific Help  
Serial/Parallel Port Configurations  
Serial Port:  
[Enabled]  
[3F8-3FF]  
[IRQ 4]  
[Enabled]  
[FIR]  
[2E8 - 2EF]  
[IRQ 3]  
[400-43F]  
[DMA 3]  
[Enabled]  
[Bi-directional]  
[378-37F]  
[IRQ 7]  
[Disabled]  
The port is disabled.  
I/O Address:  
Interrupt:  
Infrared Port:  
Mode:  
I/O Address:  
Interrupt:  
I/O Address:  
DMA Channel:  
Parallel Port:  
Mode:  
[Enabled]  
The port is enabled  
with user configuration.  
[Auto]  
Plug & Play OS  
configure the port.  
I/O Address:  
Interrupt:  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 5. Serial/Parallel Port Configuration Submenu  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
S
S e r i e s N o t e b o o k B I O S  
Table 5: Fields, Options and Defaults for Serial/Parallel Port Configuration Submenu of Advanced Menu  
Menu Field  
Options  
Default  
Description  
Serial Port:  
Disabled  
Enabled  
Auto  
[Enabled]  
Configures the serial port using either no configuration (Disabled), a user  
defined configuration (Enabled), or by allowing the BIOS or OS to choose  
the configuration (Auto).  
I/O Address:  
Interrupt:  
3F8 - 3FF  
2F8 - 2FF  
3E8 - 3EF  
2E8 - 2EF  
[3F8 - 3FF]  
[IRQ 4]  
Allows user to set the serial port base I/O address when serial port is  
Enabled.  
IRQ 3  
IRQ 4  
IRQ 10  
IRQ 11  
Allows user to set the serial port interrupt when serial port is Enabled.  
Infrared Port:  
Disabled  
Enabled  
Auto  
[Enabled]  
Configures the infrared port using either no configuration (Disabled), a  
user defined configuration (Enabled), or by allowing the BIOS or OS to  
choose the configuration (Auto).  
Mode:  
IrDA  
FIR  
[FIR]  
When the infrared port is enabled this option is available allowing the user  
to set the mode for the infrared port. Standard IrDA (IrDA 1.0) transmits  
data at up to 115.2 Kbps; FIR (IrDA 1.1) transmits at up to 4Mbps.  
I/O Address:  
3F8 - 3FF  
2F8 - 2FF  
3E8 - 3EF  
2E8 - 2EF  
[2E8 - 2EF]  
Allows user to set the infrared port I/O address when the infrared port is  
Enabled.  
Interrupt:  
IRQ 3  
IRQ 4  
IRQ 10  
IRQ 11  
[IRQ 3]  
Allows user to set the infrared port interrupt when the infrared port is  
Enabled.  
I/O Address:  
400-43F  
480-4BF  
500-53F  
580-5BF  
400-43F  
Allows user to set the FIR port I/O address when the infrared port is  
Enabled.  
DMA Channel:  
Parallel Port:  
DMA 1  
DMA 3  
[DMA 3]  
[Enabled]  
Allows user to set the infrared port DMA Channel when the infrared port  
mode is set to FIR.  
Disabled  
Enabled  
Auto  
Configures the parallel port using either no configuration (Disabled), a  
user defined configuration (Enabled), or by allowing the BIOS or OS to  
choose the configuration (Auto).  
Mode:  
Output Only  
Bi-directional  
ECP  
[Bi-directional]  
When the parallel port is enabled this option is available allowing the user  
to set the mode for the parallel port. Bi-directional allows two-way  
transfer of information between your notebook and a parallel device.  
Output Only (Half Duplex) allows information to be transferred in only  
one direction, from your notebook to the printer or similar device. ECP  
Mode allows communication with the ECP class of parallel I/O devices.  
I/O Address:  
Interrupt:  
378 - 37F  
278 - 27F  
3BC - 3BF  
[378 - 37F]  
[IRQ 7]  
Allows user to set the parallel port base I/O address when the parallel port  
is Enabled.  
IRQ 5  
IRQ 7  
Allows user to set the parallel port interrupt when the parallel port is  
Enabled.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A d v a n c e d M e n u  
Keyboard/Mouse Features Submenu of the Advanced Menu  
The Keyboard/Mouse Features submenu is for setting the parameters of the integrated and external mouse and  
keyboard.  
PhoenixBIOS Setup Utility  
Advanced  
Security  
Power Savings  
Exit  
Keyboard/Mouse Features  
Item Specific Help  
Numlock:  
[Auto]  
[On] or [Off]  
Hot Plug:  
[Enabled]  
Numlock is On or Off.  
[On/Padlock Off]  
Numlock is On, but use  
with [Fn] for 10-key  
input.  
Internal Pointing Device: [Auto Disabled]  
Initialization on Resume: [Fast]  
[Auto]  
Numlock is set to On/  
Padlock Off when PS/2  
keyboard is connected,  
otherwise Off.  
* Windows XP preserves  
Numlock state when the  
user logs off.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 6. Keyboard/Mouse Features Submenu  
Table 6: Fields, Options and Defaults for the Keyboard/Mouse Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
Numlock:  
Auto  
On  
Off  
[Auto]  
Sets the NumLock function state when the computer completes  
booting.  
On/Padlock Off  
Hot Plug:  
Disabled  
Enabled  
[Enabled]  
Enables and disables the ability to plug a mouse or keyboard into  
the port and have it immediately recognized and active.  
Internal Pointing  
Device:  
Auto Disabled  
Manual Setting  
Always Enabled  
Always Disabled  
[Auto Disabled]  
Sets the device controlling the mouse cursor on the screen. Always  
Enabled makes the pointing device always enabled whether there is  
an external mouse or not. Always Disabled makes the pointing  
device always disabled. Auto Disabled disables the internal pointing  
device when an external pointing device is connected to the port.  
Initialization on  
Resume:  
Fast  
Normal  
[Fast]  
When Fast is selected, initialization for the external devices is opti-  
mized to speed up on Resume. When Normal is selected, initializa-  
tion is not optimized.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
S
S e r i e s N o t e b o o k B I O S  
Video Features Submenu of the Advanced Menu  
The Video Features Submenu is for setting the display parameters.  
PhoenixBIOS Setup Utility  
Security Power Savings Exit  
Main  
Advanced  
Video Features  
Item Specific Help  
[Auto]  
Display:  
Select display terminal.  
Compensation: [Enabled]  
* This setting is not  
effective after  
operating system  
starts up.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 7. Video Features Submenu  
Table 7: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
Display:  
Internal Flat Panel  
[Auto]  
Selects where the video signal will be routed. Note that  
Windows settings take precedence over this setting  
after system boots up.  
External (Analog)  
External (Digital)  
Auto  
Compensation:  
Disabled  
Enabled  
[Enabled]  
Enables or disables display compensation. Note that  
Windows settings take precedence over this setting  
after system boots up.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A d v a n c e d M e n u  
Internal Device Configurations Submenu of the Advanced Menu  
The Internal Device Configuration submenu allows the user to configure other internal devices.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Item Specific Help  
Internal Device Configurations  
[Disabled]  
Serial ATA Controller: [Enabled]  
AHCI Configuration: [Enabled]  
Serial ATA port is  
disabled.  
IDE Contoller:  
Bluetooth(R):  
LAN Controller:  
Wireless LAN:  
[Enabled]  
[Enabled]  
[Enabled]  
[Enabled]  
[Enabled]  
Serial ATA port is  
enabled.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 8. Internal Device Configuration Submenu  
Table 8: Fields, Options and Defaults for the Internal Device Configuration Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
Serial ATA  
Controller:  
Disabled  
Enabled  
[Enabled]  
Enables or disables serial ATA devices.  
AHCI Controller:  
IDE Controller:  
Bluetooth(R):  
Disabled  
Enabled  
[Enabled]  
[Enabled]  
[Enabled]  
[Enabled]  
[Enabled]  
Enables or disables the AHCI (Advanced Host Controller Interface).  
This selection does not appear when PATA mode is enabled.  
Disabled  
Enabled  
Enables or disables the IDE port.  
Disabled  
Enabled  
Enables or disables the Bluetooth(R) device, when present.  
Enables or disables the LAN controller.  
LAN Controller:  
Wireless LAN:  
Disabled  
Enabled  
Disabled  
Enabled  
Enables or disables the Wireless LAN device.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
S
S e r i e s N o t e b o o k B I O S  
CPU Features Submenu of the Advanced Menu  
The CPU Features Submenu allows you to change the settings for Intel(R) SpeedStep(R) Technology for your system.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
CPU Features  
Item Specific Help  
[Enabled]  
[Battery Optimized]  
[Maximum Performance]  
SpeedStep(R) Technology:  
On Battery:  
Select Enhanced  
Intel(R) SpeedStep(R)  
Technology enabled or  
disabled.  
On AC:  
XD Bit functionality:  
[Enabled]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 9. CPU Features Submenu  
Table 9: Fields, Options and Defaults for the CPU Features Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
SpeedStep(R)  
Technology:  
Disabled  
Enabled  
[Enabled]  
Enables or disables SpeedStep(R) Technology which allows the  
user to determine the CPU performance when the tablet is run-  
ning on AC or battery. This technology decreases power consump-  
tion by decreasing CPU speeds.  
On Battery:  
On AC:  
Maximum Performance  
Battery Optimized  
Automatic  
[Battery  
Optimized]  
Allows the user to select the CPU performance when the system is  
running on battery power.  
Maximum Performance  
Battery Optimized  
Automatic  
[Maximum  
Performance]  
Allows the user to select the CPU performance when the system is  
running on AC power.  
XD Bit  
functionality:  
Enabled]  
Disabled  
[Enabled]  
Allows the user to enable and disable the Execute Disable  
Bit functionality. Execute Disable Bit allows the processor  
to classify areas in memory where application code can  
and cannot execute. In the event an internet worm  
attempts to insert code in the buffer, the processor  
disables code execution to prevent damage or worm  
propagation.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A d v a n c e d M e n u  
USB Features Submenu of the Advanced Menu  
The USB Features Submenu enables and disables legacy USB support for your system.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
USB Features  
Item Specific Help  
[Enabled]  
[Enabled]  
Legacy USB Support:  
SCSI SubClass Support:  
[Disabled]  
The feature is disabled.  
[Enabled]  
Legacy USB Emulation  
is enabled and USB  
devices are available  
without USB aware OS.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 10. USB Features Submenu  
Table 10: Fields, Options and Defaults for the USB Features Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
Legacy USB Support:  
Disabled  
Enabled  
[Enabled]  
When Disabled is selected, legacy USB emulation is disabled. When  
Enabled is selected, legacy USB emulation is enabled and USB  
devices are available without USB-aware OS.  
SCSI SubClass  
Support:  
Disabled  
Enabled  
[Enabled]  
When Enabled is selected, USB devices that belong to the SCSI sub-  
class in the mass storage class (e.g., USB Memory Key) are enabled.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
S
S e r i e s N o t e b o o k B I O S  
Miscellaneous Configurations Submenu of the Advanced Menu  
The Miscellaneous Configurations Submenu configures the miscellaneous features for your system.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Item Specific Help  
Miscellaneous Configurations  
Configures the power  
button.  
Power Button:  
Wake up on LAN:  
Volume Setting:  
Hardware Power Management:  
[Disabled]  
[Disabled]  
[Middle]  
*ACPI OS ignores this  
setting.  
[Disabled}  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 11. Miscellaneous Configurations Submenu  
Table 11: Fields, Options and Defaults for the Miscellaneous Configurations Submenu  
Menu Field  
Options  
Default  
Description  
Power Button:  
Disabled  
Power Off  
[Disabled]  
When Disabled is selected, the power button does not respond to a  
press. When Power Off is selected, the button turns the power off.  
Wake up on LAN:  
Volume Setting:  
Disabled  
Enabled  
[Disabled]  
[Middle]  
When Enabled is selected, the system will wake up when the internal  
LAN device receives a Magic Packet while the system is powered off.  
Off  
Minimum  
Middle  
Maximum  
Allows you to set or disable the system volume level.  
Hardware Power  
Management:  
Disabled  
Enabled  
[Enabled]  
When Enabled is selected, the Hardware Power Management feature  
is turned on.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A d v a n c e d M e n u  
Event Logging Submenu of the Advanced Menu  
The Event Logging Submenu configures event logging features for DMI events.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Event Logging  
Item Specific Help  
Event Log Capacity:  
Event Log Validity:  
Space Available  
Valid  
Press <Enter> key to  
view the contents of  
the event log.  
View Event Log:  
[Enter]  
Event Logging:  
[Enabled]  
System Boot Event:  
[Disabled]  
Clear All Event Logs:  
Mark Events as Read:  
[No]  
[Enter]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 12. Event Logging Submenu  
Table 12: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
Event Log  
Capacity:  
Space Available  
Display only.  
Event Log Validity:  
View Event Log:  
Event Logging:  
Valid  
Display only.  
Enter  
[Enter]  
[Enabled]  
Allows you to view content of event log.  
Turns event logging on and off for all DMI events.  
Disabled  
Enabled  
System Boot  
Event:  
Disabled  
Enabled  
[Disabled]  
[No]  
Turns event logging on and off for DMI system boot events.  
When set to [Yes] all event logs will be cleared at next boot.  
Allows you to make all events currently in the event log as read.  
Clear All Event  
Logs:  
No  
Yes  
Mark Events as  
Read:  
Enter  
[Enter]  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
S
S e r i e s N o t e b o o k B I O S  
The Security menu allows you to set up the data security  
features of your notebook to fit your operating needs and  
to view the current data security configuration. Follow the  
instructions for Navigating Through the Setup Utility to  
make any changes. (See Navigating Through the Setup  
Utility on page 2 for more information)  
field's function and any special information needed to  
help understand the field's use. The default condition is  
no passwords required and no write protection.  
If you set a password, write it down and  
keep it in a safe place. If you forget the  
password you will have to contact your  
support representative to regain access  
to your secured functions and data.  
The following tables show the names of the menu fields  
for the Security menu and its submenus, the options for  
each field, the default settings and a description of the  
If you make an error when re-entering  
the password a [Warning] will be dis-  
played on the screen. To try again press  
the [Enter] key and then retype the pass-  
word. Press the [Esc] key to abort the  
password setting process.  
Entering a password incorrectly three times  
in a row will cause the keyboard and  
mouse to be locked out and the warning  
[System Disabled]to be displayed. If  
this happens, restart the computer by  
turning off and on the power with the  
power switch and use the correct  
password on reboot.  
If the Password on Boot is Disabled you  
will not have to type your password  
upon resuming the system from the Sus-  
pend or Save-to-Disk modes.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Boot  
Info  
Exit  
Item Specific Help  
Supervisor Password Is:  
User Password Is:  
Clear  
Clear  
Press <Enter> key to  
set Supervisor Password  
to enable any password  
features.  
Set Supervisor Password  
Set User Password  
Minimum User Password Length: [0]  
[Enter]  
[Enter]  
Password on Boot:  
[Disabled]  
Then password entry is  
required to enter BIOS  
Setup.  
On Automatic Wake up:  
KB Lock on Resume:  
Boot from Removable Media:  
Flash Write:  
[Disabled]  
[Disabled]  
[All]  
[Enabled]  
Hard Disk Security  
Owner Information  
Security Chip Setting  
Security Panel On Resume:  
[Enabled]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 13. Security Menu  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
S e c u r i t y M e n u  
Table 13: Fields, Options and Defaults for the Security Menu  
Menu Field  
Options  
Default  
Description  
Supervisor  
Password is:  
–—  
Clear  
A display-only field. Set is displayed when the system Supervisor  
Password is set and Clear when it is not.  
User Password is:  
–—  
Clear  
A display-only field. Set is displayed when the general User Password is  
set, and Clear when it is not.  
Set Supervisor  
Password  
[Enter]  
[Enter]  
Sets, changes or cancels Supervisor Password. The Supervisor Password  
may be up to seven characters long and include only letters or numbers  
(no symbols). Passwords are NOT case- sensitive. To cancel a password  
press the Enter key instead of entering characters in the Enter New Pass-  
word field and in the Re-enter New Password field. When a Supervisor  
Password is set it must be used to access the BIOS setup utility.  
Set User Password  
[Enter]  
[Enter]  
This field can only be accessed if the Supervisor Password is set. Sets,  
changes or cancels the User Password. The User Password may be up to  
seven characters long and must include only letters or numbers (no  
symbols). Passwords are NOT case-sensitive. To cancel a password press  
the Enter key instead of entering characters in the Enter New Password  
field and in the Re-enter New Password field. When a User Password is  
set it must be used to access the BIOS setup utility.  
Minimum User  
[0]  
[0]  
Sets the minimum length for User Password.  
Password Length:  
Password on Boot:  
Disabled  
First Boot  
Every Boot  
[Disabled]  
When Enabled, a password (User or Supervisor) is required after the  
Power On Self Test (POST) before the operating system will be read from  
a disk. When set to Disabled no password is required. If no Supervisor  
Password is set this feature is not available and no password is required.  
On Automatic  
Wake up:  
Disabled  
Enabled  
[Disabled]  
[Disabled]  
This field is active only when Password On Boot is set to First Boot or  
Every Boot. When disabled, password entry is not required on automatic  
wake up on LAN or Real Time Clock. When enabled, the password is still  
required on automatic wake up.  
KB Lock on  
Resume:  
Disabled  
Enabled  
When set to Enabled, the keyboard and mouse inputs are locked out  
upon Suspend from Resume or Save-to-Disk mode until the password is  
entered. When both passwords are set, the User password is always used  
to lock. Password entry before OS boot is disabled upon unattended  
boot.  
Boot from  
Removable Media:  
All  
[All]  
Enable password allows supervisor access only.  
Supervisor only  
Flash Write:  
Disabled  
Enabled  
[Enabled]  
–—  
When disabled, the BIOS Flash memory is write protected.  
Hard Disk Security  
–—  
–—  
When selected, opens the Hard Disk Security submenu, which allows you  
to configure hard disk security features.  
Owner  
Information  
–—  
When selected, opens the Owner Information submenu, which allows  
you to set Owner information.  
Security Chip  
Setting  
–—  
–—  
When selected, opens the Security Chip Settings submenu, which allows  
you to set Security Chip information.  
Security Panel On  
Resume  
Disabled  
Enabled  
[Enabled]  
Allows the Security Panel Feature to be enabled or disabled upon  
Suspend from Resume.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
S
S e r i e s N o t e b o o k B I O S  
Hard Disk Security Submenu of the Security Menu  
The Hard Disk Security Submenu is for configuring hard disk security features.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Hard Disk Security  
Item Specific Help  
Serial ATA Port 0 Password Is:  
Primary Master Password Is:  
Clear  
Not Available  
Set Serial ATA Port 0 Password  
Set Primary Master Password  
[Enter]  
[Enter]  
Password Entry on Boot:  
[Disabled]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter  
Select  
Sub-Menu  
Figure 14. Hard Disk Security Submenu  
Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu  
Note: The fields on this submenu cannot be changed unless the Supervisor Password is set.  
Menu Field  
Options  
Default  
Description  
Serial ATA Port 0  
Password Is::  
---  
---  
A display-only field. Set is displayed when the Serial ATA Port 0 Password is set  
and Clear when it is not.  
Primary Master  
Password Is:  
---  
---  
---  
A display-only field. Not Available is displayed.  
Set Serial ATA Port  
0 Password  
[Enter]  
Sets, changes or cancels Serial ATA Port 0 Password. The password may be up to  
seven characters long and include only letters or numbers (no symbols). Passwords  
are NOT case- sensitive. To cancel a password press the Enter key instead of enter-  
ing characters in the Enter New Password field and in the Re-enter New Password  
field. When a Serial ATA Port 0 Password is set it must be used to access the hard  
disk. Data on the hard disk cannot be read on other systems.  
Set Primary  
---  
[Enter]  
Not currently available.  
Master Password  
Password Entry on  
Boot:  
Disabled  
Enabled  
[Disabled]  
When this is disabled, it is not necessary to enter the password before booting.The  
hard disk is still password-protected without entering a password.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
S e c u r i t y M e n u  
Owner Information Submenu of the Security Menu  
The Owner Information Submenu is for setting owner information. Note that Owner Information cannot be set  
without having entered a supervisor’s password.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Owner Information  
Item Specific Help  
Owner Information Is:  
Set Owner Information  
Clear  
[Enter]  
Foreground Color:  
Background Color:  
[Gray]  
[Black]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 15. Owner Information Submenu  
Table 15: Fields, Options and Defaults for the Owner Information Submenu of the Security Menu  
Note: The fields on this submenu cannot be changed unless the Supervisor Password is set.  
Menu Field  
Options  
Default  
Description  
Owner  
–—  
Clear  
Display only.  
Information Is:  
Set Owner  
Information:  
–—  
[Enter]  
[Gray]  
Field to write owner infor-  
mation, e.g., your name.  
Foreground  
Color:  
Black  
Blue  
Green  
Red  
Gray  
Light Red  
Light Magenta  
Yellow  
Set foreground color.  
Magenta  
Brown  
White  
Light Blue  
Light Green  
Light Cyan  
Cyan  
Bright White  
Background  
Color:  
Black  
Blue  
Green  
Cyan  
Red  
Gray  
Light Red  
Light Magenta  
Yellow  
[Black]  
Sets background color.  
Magenta  
Brown  
White  
Light Blue  
Light Green  
Light Cyan  
Bright White  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
S
S e r i e s N o t e b o o k B I O S  
Security Chip Setting Submenu of the Security Menu  
The Security Chip Setting Submenu is for enabling or disabling the embedded security chip.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Security Chip Setting  
Item Specific Help  
[Enabled]]  
[Enter]  
Security Chip:  
Clear Security Chip:  
Select Security Chip  
enabled or disabled.  
* A reboot is required  
after exit to configure  
Security Chip correctly.  
Clear Security Chip  
becomes selectable  
after the reboot.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 16. Security Chip Setting Submenu  
Table 16: Fields, Options and Defaults for the Security Chip Setting Submenu of the Security Menu  
Menu Field  
Options  
Default  
Description  
Security Chip:  
• Disabled  
• Enabled  
[Disabled]  
Select to enable or disable the security chip. Note that after configuring  
the security chip, a system reboot is required.  
Clear Security Chip  
____  
[Enter]  
Allows you to clear the security chip. Note that if you clear the security  
chip, you will not be able to access data that has already been encrypted.  
This field is only visible when Security Chip is [Enabled].  
Exiting from the Security Menu  
When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to  
another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish to move to  
another menu, use the cursor keys.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B o o t M e n u  
BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE  
The Boot Menu is used to select the order in which the  
BIOS searches sources for the operating system. Follow  
the instructions for Navigating Through the Setup  
Utility to make any changes. (See Navigating Through the  
Setup Utility on page 2 for more information)  
The following tables show the names of the menu fields  
for the Boot menu and its submenu, all of the options  
for each field, the default settings and a description of  
the field's function and any special information needed  
to help understand the field's use.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Boot  
Info  
Exit  
Item Specific Help  
Quick Boot:  
Boot Time Diagnostic Screen:  
Boot Menu:  
Preboot Execution Environment:  
Boot Device Priority  
[Enabled]  
[Disabled]  
[Enabled]  
[Enabled]  
[Disabled]  
All diagnostic tests  
will be done.  
[Enabled]  
Some diagnostic tests  
may be skipped while  
booting to speed up.  
F1 Help  
ESC Exit  
Select Item -/Space Change Values  
Select Menu Enter  
Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 17. Boot Menu  
Table 17: Fields, Options and Defaults for the Boot Menu  
Menu Field  
Options  
Default  
Description  
Quick Boot:  
Disabled  
Enabled  
[Enabled]  
Turns on and off booting with a truncated set of Power On Self  
Tests. (Fewer tests mean faster turn on.)  
Boot Time  
Diagnostic Screen:  
Disabled  
Enabled  
[Disabled]  
[Enabled]  
Turns on and off display of test results instead of Fujitsu logo screen  
during Power On Self Test.  
Boot Menu:  
Disabled  
Enabled  
When disabled, the boot menu is disabled and the F12 key is  
ignored. When enabled, the boot menu is enabled. Note: This field  
cannot be changed unless the Supervisor Password is set.  
Preboot Execution  
Environment:  
Disabled  
Enabled  
[Enabled]  
__  
Turns on and off boot from network server options.  
Boot Device  
Priority:  
Selects the Boot Device  
Priority submenu  
This menu allows setting up the source for the operating system.  
See “Boot Device Priority Submenu” in the following section.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
S
S e r i e s N o t e b o o k B I O S  
The Boot Device Priority Submenu of the Boot Menu  
The Boot Device Priority Submenu is for setting the  
order of checking of sources for the operating system.  
Be aware of the operating environment  
when booting from a CD-ROM or you  
may overwrite files by mistake.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Boot  
Boot Device Priority  
Item Specific Help  
+Floppy Disk Drive  
+Hard Disk Drive  
CD-ROM Drive  
Keys used to view or  
configure devices:  
Network Boot  
<Enter> expands or  
collapses devices with  
a + or -.  
<Ctrl+Enter> expands  
all.  
<Shift+1> enables or  
disables a device.  
<+>/<Space> or <->  
moves the device up or  
down.  
<d> removes a device  
that is not installed.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter  
Select  
Sub-Menu  
Figure 18. Boot Device Priority Submenu  
Table 18: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu  
Menu Field  
Description  
+Floppy Disk Drive  
+Hard Disk Drive  
CD-ROM Drive  
Network Boot*  
The boot selections determine the order in which the BIOS searches for the operating system during a startup  
sequence. To change the order highlight one source by using the [up] or [down] cursor keys and then press the [+]  
or [-] key to change the order number for that source. Be sure to save your changed order when you exit the BIOS  
setup utility.  
* Network Boot only appears if Preboot Execution Environment is enabled.  
Exiting from Boot Menu  
When you have finished setting the boot parameters with the Boot menu, you can either exit from the setup utility or  
move to another menu. If you wish to exit from the setup utility press the [Esc] key to go to the Exit menu. If you wish  
to move to another menu, use the cursor keys.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E x i t M e n u  
INFO MENU – DISPLAYS BASIC SYSTEM INFORMATION  
The Info menu is a display only screens that provides the  
configuration information for your notebook.  
The information, including CPU type and  
The following table shows the names of the menu fields  
for the Info menu and the information displayed in  
those fields. These fields are for information purposes  
only, and are not editable.  
speed, and total memory, displayed on this  
screen varies according to the unit you  
purchased.  
PhoenixBIOS Setup Utility  
Security Boot Info  
Main  
Advanced  
Exit  
BIOS Version:  
BIOS Date:  
1.05  
10/24/2005  
BIOS Area:  
E000h - FFFFh  
CPU Type:  
CPU Speed:  
L1 Cache:  
L2 Cache:  
Intel(R) Pentium(R) M processor 760  
2.00 GHz  
64 KB  
2048 KB  
Total Memory:  
512 MB  
Memory Slot 1: None  
Memory Slot 2: 512 MB DDR2 SDRAM  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9  
Setup Defaults  
F10 Save and Exit  
Figure 19. Info Menu  
Table 19: Fields, Options and Defaults for the Info Menu  
Note that the parameters listed in the following table may be different, depending upon your system configuration.  
Menu Field  
Default  
Menu Field  
Default  
BIOS Version:  
1.XX  
L1 Cache:  
64 KB  
BIOS Date:  
BIOS Area:  
CPU Type:  
CPU Speed:  
XX/XX/XXXX  
E000h – FFFFh  
L2 Cache:  
2048 KB  
512 MB  
None  
Total Memory:  
Memory Slot 1:  
Memory Slot 2:  
Intel(R) Pentium(R) M processor 760  
2.00 GHz  
512 MB DDR2 SDRAM  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
S
S e r i e s N o t e b o o k B I O S  
EXIT MENU – LEAVING THE SETUP UTILITY  
The Exit Menu is used to leave the setup utility. Follow the instructions for Navigating Through the Setup Utility to  
make any changes. (See Navigating Through the Setup Utility on page 2 for more information). The following table  
shows the names of the menu fields for the Exit menu, the default settings and a description of the field's function and  
any special information needed to help understand the field's use.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Boot  
Exit  
Item Specific Help  
Exit Saving Changes  
Exit Discarding Changes  
Load Setup Defaults  
Discard Changes  
Save Changes  
Save Changes and Power Off  
Exit System Setup and  
save your changes to  
CMOS.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9  
Setup Defaults  
F10 Save and Exit  
Figure 20. Exit Menu  
Table 20: Fields, Options and Defaults for the Exit Menu  
Menu Field  
Description  
Exit Saving  
Changes  
Exit Saving Changes and Exit will store all the entries on every menu of the setup utility to the BIOS memory and  
then exit the setup utility. A confirmation message Save Configuration changes and exit now? [Yes]  
[No] will be displayed.  
Exit Discarding  
Changes  
Selecting Exit Discarding Changes and Exit will exit the setup utility with out writing to the BIOS memory. When the  
BIOS recognizes this selection it will load the operating system and begin operation.  
Load Setup  
Defaults  
Selecting Load Setup Defaults will load the factory preset default values for all menu fields, then display the message  
Load default configuration now? [Yes] [No]. When confirmed the setup utility will return to the Exit  
Menu. To return to another menu follow the directions in the Navigating Through the Setup Utility Section.  
Discard Changes  
Save Changes  
Selecting Discard Changes will load the previous values in BIOS memory for all menu fields. The message Load  
previous now? [Yes] [No] will be displayed. When confirmed the utility will return to the Exit menu. To  
return to another menu, follow the directions in the Navigating Through the Setup Utility Section.  
Selecting Save Changes causes the new settings in all menus to be written to the BIOS memory. The message Save  
configuration changes now? [Yes] [No] will be displayed. When confirmed, the setup utility will return  
to the Exit menu. To go to another menu, follow the directions in the Navigating Through the Setup Utility section.  
Save Changes  
and Power Off  
Selecting Save Changes and Power Off will cause the new settings in all menus to be written to the BIOS memory,  
then power the system off. The message Save configuration changes now and power off? [Yes]  
[No] will be displayed. When confirmed, the setup utility shut down the system.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Edelbrock Automobile Parts 1403 User Manual
Fellowes Paper Shredder 225CI 225I User Manual
Fisher Price Automobile Battery Charger 74241 User Manual
Fitness Quest Exercise Bike 595r User Manual
Furman Sound Power Supply Elite 16 PF E User Manual
Furuno Marine RADAR FAR 2117 User Manual
Garland Range C0836 8 User Manual
GE Air Conditioner AZ85E18DAC User Manual
GE Barcode Reader TS0861 User Manual
GE Dishwasher GLD4408 User Manual