Fujitsu Flat Panel Television PDS4229W User Manual

USER’S MANUAL  
42” WIDE PLASMA DISPLAY  
PDS4229W  
Contents  
Page  
Page  
Before Use  
Adjustments  
• Safety Precautions ·········································· 2–3  
• Features ······························································· 4  
• Accessories ·························································· 5  
• HandyTips ··························································· 5  
• Installation ··························································· 6  
• Adjusting Pictures (PICTURE Menu)·········· 24–25  
• Adjusting Screen Position and Size  
(POSITION/SIZE Menu) ······························· 26–27  
• Other Adjustments (FEATURES Menu) ··· 28–35  
• Initialization of user adjustment value  
Usage  
(FACTORY DEFAULT) ········································ 36  
• Part Names and Functions ··························· 7–10  
• Using the Remote Control ································ 11  
• Connecting the Display to External  
Equipment ··················································· 12–13  
• Basic Operations ··············································· 14  
• Selecting Input Mode········································ 15  
• Watching Pictures on the Wide Screen······ 16–17  
• How to Use Menus······································ 18–23  
Others  
• Options······························································· 37  
• Factory Settings················································· 38  
• Specification ······················································ 39  
• Cleaning and Maintenance······························· 40  
Before using the display, read this m anual carefully so that you know how to use the display correctly.  
Refer to this m anual whenever questions or problem s about operation arise. Be sure to read and observe the  
safety precautions.  
Keep this m anual where the user can see it easily.  
* Installation and rem oval require special expertise. Consult your product dealer for details.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY PRECAUTIONS  
FCC NOTICE  
• PDS4229W: A Class A digital device  
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial  
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the  
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to  
cause harmful interference in which case the user will be required to correct the interference at his own expense.  
IMPORTANT INFORMATION  
WARNING: This is a Class A product. In a domestic environment this product may cause radio interference in  
which case the user may be required to take adequate measures.  
WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS  
PRODUCT TO RAIN OR MOISTURE.  
IMPORTANT SAFEGUARDS  
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. But  
IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguards  
incorporated into this product, observe the following basic rules for its installation, use and service. Please read these “Important  
Safeguards” carefully before use.  
All the safety and operating instructions should be read before the product is operated.  
The safety and operating instructions should be retained for future reference.  
All warnings on the product and in the operating instructions should be adhered to.  
All operating instructions should be followed.  
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.  
Do not use attachments not recommended by the product manufacturer as they may cause hazards.  
Do not use this product near water. Do not use immediately after moving from a low temperature to high temperature, as this causes  
condensation, which may result in fire, electric shock, or other hazards.  
Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or adult, and serious  
damage to the product. The product should be mounted according to the manufacturer’s instructions, and should use a mount  
recommended by the manufacturer.  
When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and uneven surfaces  
which may cause the product and cart to overturn, damaging equipment or causing possible injury to the operator.  
Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the product and  
protect it from overheating. These openings must not be blocked or covered. (The openings should never be blocked by placing the  
product on bed, sofa, rug, or other similar surface. It should not be placed in a built-in installation such as a bookcase or rack unless  
proper ventilation is provided and the manufacturer’s instructions have been adhered to.)  
For proper ventilation, separate the product from other equipment, which may prevent ventilation, and keep distance more than 10 cm.  
This product should be operated only from the type of power source indicated on the label. If you are not sure of the type of power  
supply of your home, consult your product dealer or local power company.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
This product is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you are unable to insert the plug  
into the outlet, contact your electrician to install the proper outlet. Do not defeat the safety purpose of the grounded plug.  
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay  
particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product.  
For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it  
from the wall outlet and disconnect the cable system. This will prevent damage to the product due to lightning and power line surges.  
Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric  
shock.  
Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that  
could result in a fire or electric shock. Never spill liquid of any kind on the product.  
Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages and other hazards.  
Refer all service to qualified service personnel.  
Unplug this product from the wall outlet and refer service to qualified service personnel under the following conditions:  
a) When the power supply cord or plug is damaged.  
b) If liquid has been spilled, or objects have fallen on the product.  
c) If the product has been exposed to rain or water.  
d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the  
Operation Manual, as an improper adjustment of other controls may result in damage and will often require extensive work by a  
qualified technician to restore the product to its normal operation.  
e) If the product has been dropped or damaged in any way.  
f) When the product exhibits a distinct change in performance—this indicates a need for service.  
When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or with  
same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.  
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the  
product is in proper operating condition.  
The product should be placed more than one foot away from heat sources such as radiators, heat registers, stoves, and other products  
(including amplifiers) that produce heat.  
When connecting other products such as VCR’s, and personal computers, you should turn off the power of this product for protection  
against electric shock.  
Do not place combustibles behind the cooling fan. For example, cloth, paper, matches, aerosol cans or gas lighters that present special  
hazards when overheated.  
Use only the accessory cord designed for this product to prevent shock.  
The power supply voltage rating of this product is AC100–240 V, and the power cord attached conforms to the following power supply  
voltage. Use only the power cord designated by our dealer to ensure Safety and EMC.  
Use the standard power plug and cord set of the specified country.  
Consult your product dealer.  
When it is used with other power supply voltage, the power cable must be changed.  
Use the standard power plug and cord set of the specified country.  
Consult your product dealer.  
Power cord  
Power supply voltage:  
AC 100–125 V  
(Included)  
AC 200–240 V  
(Not included)  
AC 240 V (SAATYPE)  
(Not included)  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
This display uses a plasma display panel and is only 8.5 cm deep. With its high picture quality and performance, it is perfectly suited for  
multimedia applications.  
Variety of input signals  
• In addition to video, S-video, and RGB (mD-sub Connector), signals, this display supports input of high-quality video signals such as  
DVD and HDTV.  
• Depending on the model, the display supports video input for different color television systems as follows: NTSC, PAL, SECAM,  
PAL60,4.43NTSC.  
• The display has a component video input terminal to receive signals from the DVD player and HDTV equipment as well as digital  
broadcasting signals (color difference signals).  
• The display has an RGB input terminal to receive signals, including VGA, SVGA, and XGA*1.  
5 screen sizes (Video and Decoder input mode) and 3 screen sizes (RGB-PC input mode)  
• This display offers a total of five different screen sizes in video and Decoder input mode: Wide1, Wide2, Zoom1, and Zoom2.  
A Normal mode is also available for displaying of normal-size (4:3 aspect ratio) pictures.  
• Three different screen sizes in RGB-PC input mode (Normal, Wide, and Zoom) are also available.  
• The 852 x 480 dot area can be selected from the 1024 x 768 dot display by switching to Zoom display with XGA (Vertical frequency  
less than 75Hz) input.  
Vertical installation  
• The display can be installed vertically, enabling advertisement to be displayed. In this case, you can set up the display so that on-  
screen information, such as input modes and menus, is displayed properly.  
Power management function  
• The display features a DPMS (Display Power Management Signaling) function that ensures automatic power saving capability.  
Flexible as part of a system  
You can operate the display by remote control using the RS-232C interface.  
• If you have two or more displays, you can assign a unique number to each of them so that you can select which one you want to use.  
• Input Priority function for selecting automatic switching to desired mode is provided to avoid troublesome operation.  
• Main unit key lock function can prevent mischief and malfunction.  
Others  
• Troublesome adjustment of clock phase can be avoided by automatic clock phase adjustment function (Automatic Clock Phase  
function).  
You can specify the color temperature.  
• The white screen and screen orbiter functions are available to minimize phosphor burn-in.  
*1 The refresh rate of 60, 70, 75 Hz for XGA (1024 x 768) and those of 60, 72, 75 and 85 Hz for SVGA (800 x 600) are supported.  
Note that the XGA and SVGA pictures will be smaller when displayed on the screen.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACCESSORIES  
CHECKING ACCESSORIES  
One remote control  
Two AA batteries  
One users manual  
One power cable  
Two ferrite cores  
Manual  
HANDYTIPS  
• Pictures may become “burnt” into the screen phosphors if the screen is left on for extended periods. To ensure that the display has a  
prolonged service life, be sure to use a screen orbiter, white screen. This will ensure the same picture or pattern is not constantly  
displayed for long periods. (See P. 33.)  
• The plasma display panel, which is built for maximum precision, provides more than 99.99% effective pixels. You may find, however,  
that some pixels constantly remain lit or dimmed.  
• The display has a fan to prevent its internal temperature from rising.  
• Be careful with the air delivered by the fan. It may be very hot.  
• Contact your dealer if you find that the display does not seem to function properly when used with other audio-visual equipment.  
You may need to move your display if it produces degraded pictures or noise due to electromagnetic radiation, or if the infrared remote  
control does not function properly.  
• Pictures may not be displayed properly if you connect a non-standard PC to the RGB input terminal. In this case, contact your dealer  
for more information.  
• The protective circuit, built into the display, automatically turns off the power if the display has a problem. In this case, you will see  
that the power indicator lamp flashes red.  
Warning  
If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the  
power plug from the receptacle to prevent fire or electric shock. Then, check the display in accordance with the instructions given on  
P. 40, or contact your dealer.  
• Viewing the screen constantly for extended periods can strain your eyes. Be sure to stay at a proper distance (at least 1.5 m or 5 feet)  
from the screen and to look occasionally away while working.  
• Have the display inspected and cleaned by your dealer at regular intervals.  
Information  
Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location.  
Be sure to use the optional stand, wall-mounting unit or the other unit when installing the display. Also, be also sure that your dealer  
performs the installation.  
See the appropriate instruction manual for more information on the installation hardware you select.  
To prevent an accident and ensure safety in the event of an earthquake, fix the display securely into position as described below.  
To ensure proper heat radiation, provide at least as much space around the display as shown below.  
* Make sure that the display is installed in a location where the temperature can be maintained between 0°C and 40°C.  
* Never attempt to tilt the display sideways or backward.  
* To prevent the power and other cables from being accidentally pulled, make sure that they run along the wall or through corners.  
* The display can be installed with either of its sides facing down.  
When using the stand  
Front  
Side  
(cm)  
(cm)  
Upper  
10  
1.5  
10  
10  
6
Wall  
Right  
Left  
Floor  
Floor  
When using the wall-mounting unit (horizontal type)  
When using the wall-mounting unit (vertical type)  
Front  
Side  
Front  
Side  
Upper  
10  
(cm)  
(cm)  
(cm)  
(cm)  
Wall mounting unit  
Upper  
10  
Wall mounting unit  
10  
10  
10  
10  
Left  
Left  
Right  
Right  
Wall  
Wall  
6
Lower  
1.5  
10  
Lower  
1.5  
* When installing the display vertically, be sure to rotate  
the text.(Refer to OSD Rotate. See P.30) and setup  
vertical installation. (Refer to Installation. See P.35)  
Note  
The display is a highly precise piece of equipment and therefore must be packed properly before transportation. Be sure to use only those packing  
materials originally supplied with the display when repacking it.  
Reference  
See P. 37 for more information on options.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
PART NAMES AND FUNCTIONS  
Front  
1 Power indicator lamp  
This lamp shows the state of the power supply.  
Lit (red):  
Standby  
Lit (green):  
Power ON  
Lit (orange): Power saving (DPMS: Power saving  
function) mode ON  
1
Flashing (red): Malfunction (Flashes differently depending  
on the type of malfunction. See P. 40 for  
more information.)  
2
2 Remote control signal receiver  
Receives signals from the remote control.  
3 Power button [POWER]  
Turns the power ON or OFF.  
4 Input mode selector button [MODE]  
Switches between picture input modes.  
5 Wide screen selector button [WIDE]  
Switches the screen over to a desired wide screen.  
6 Menu button [MENU]  
Control Panel (bottom)  
Displays picture adjustment menus.  
7 Adjustment buttons [  
/
]
3
4
5
6
78 9  
The [ ] buttons can also be used to scroll through options  
/
when a menu is displayed.  
8 Adjustment buttons [  
/
]
The [  
/
] buttons can also be used to scroll through options  
in a menu, or to change values.  
9 Set button [ENTER]  
Press this button to finalize the selection of a desired option in  
a menu.  
Warning  
If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the  
power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
PART NAMES AND FUNCTIONS (Continued)  
Bottom  
12  
3
4
5
6
1 Video input terminal (VIDEO INPUT)  
Connect this terminal to the video output terminal of your VCR or video disk player.  
2 S-video input terminal (S-VIDEO INPUT)  
Connect this terminal to the S-video output terminal of your VCR or video disk player.  
3 RS-232C terminal (RS-232C)  
This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC.  
When connecting a cable, attach a ferrite core to the cable. (See P. 12.)  
* No RS-232C cable is supplied with the display. The type of cable to be used varies depending on the PC model. Contact your  
dealer for more information.  
4 RGB input terminal (RGB INPUT/mD-sub)  
Connect this terminal to the PCs display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal.  
* No RGB cable is supplied with the display. The type of cable to be used varies depending on the PC model. Contact your dealer  
for more information.  
5 Component video input terminal (COMPONENTVIDEO INPUT)  
Connect this terminal to the component video output (color difference output) terminal of your HDTV unit or DVD player.  
When connecting a cable, attach a ferrite core to the cable. (See P. 12.)  
6 Power input terminal  
Connect this terminal to the power cable supplied with the display.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of InputTerminals  
RGB input terminal (RGB INPUT/mD-sub)  
Pin No. Input signal Pin No.  
Input signal  
1
2
3
4
5
6
7
8
Red  
9
Green  
Blue  
10  
Ground  
11  
12  
Ground  
Ground  
Ground  
Ground  
13  
Horizontal synchronization (TTL)  
14  
Vertical synchronization (TTL)  
15  
Frame  
Ground  
RS-232C terminal (RS-232C)  
Pin No.  
Signal  
1
2
3
4
5
6
7
8
9
DCD (Data Carrier Detect)  
RD (Received Data)  
TD (Transmit Data)  
DTR (Data Terminal ready)  
GND (Ground)  
DSR (Data Set Ready)  
RTS (Request To send)  
CTS (Clear To Send)  
RI (Ring Indication)  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
PART NAMES AND FUNCTIONS (Continued)  
Remote Control  
1 Power ON button [POWER ON]  
Turns the power ON.  
(See P. 14.)  
(See P. 14.)  
(See P. 15.)  
(See P. 15.)  
(See P. 16–17.)  
(See P. 18–36.)  
1
3
2
2 Power OFF button [POWER OFF]  
Turns the power OFF.  
5
4
3 RGB input mode selector button [RGB]  
Switches between RGB input modes.  
4 Video input mode selector button [VIDEO]  
Switches between video input modes.  
5 Wide screen selector button [WIDE]  
Switches the screen over to a desired wide screen.  
6 Menu button [MENU]  
6
7
8
9
Use this button to display a desired menu for adjusting the picture.  
7 Volume adjustment buttons [VOL +/-]  
Unused.  
=
8 Adjustment buttons [  
/
/
/
]
(See P. 18–36.)  
Use these buttons to scroll through options in a menu and change values.  
9 Enter button [ENTER]  
(See P. 18–36.)  
Press this button to finalize the selection of a desired menu or option within a menu.  
0 Display selector buttons [SHIFT 1–4]  
(See P. 34 .)  
When you use two or more displays, you can use these buttons to control up to four displays  
by assigning a unique number to each display.  
PUTTING BATTERIES INTHE REMOTE CONTROL  
1 To remove the cover, slide it  
2 Place two AA batteries in the  
remote control. Make sure that the  
batteries are properly oriented.  
3 Close the cover until it snaps into  
outwards while pressing it down.  
place.  
Note  
The remote control will not function properly if the batteries are dead. Be sure to replace them as needed.  
Make sure that you use replace the batteries with new ones; also, be sure to use replacement batteries of the same type as the original ones.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USINGTHE REMOTE CONTROL  
PRECAUTIONS  
To prevent malfunction, be sure not to apply any form of severe shock to the remote control.  
To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or  
heating equipment.  
Be sure not to clean the remote control using a cloth dampened in any volatile solvent, such as benzene or thinner.  
EFFECTIVE RANGE FORTHE REMOTE CONTROL  
Point the remote control at the displays signal receiver when using it.  
Make sure that there are no obstacles between the remote control and the displays signal receiver.  
Upper  
20°  
20°  
Lower  
30°  
30°  
Left  
Rignt  
5 m (Front)  
Information  
The remote control may not function properly if you use a high-frequency fluorescent lamp. If you experience problems, move the lamp or use the  
remote control from a different position.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTINGTHE DISPLAYTO EXTERNAL EQUIPMENT  
Be sure to turn OFF the power to the display and external equipment before making any connections.  
No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC  
model. Contact your dealer for more information.  
RECEPTACLE  
Make sure that the power cables grounding wire is grounded.  
The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you  
will need to have it replaced. Contact your dealer for more information.  
CONNECTINGTHE DISPLAYTO EXTERNAL EQUIPMENT  
Carefully check the terminals for position and type before making any connections.  
Loose connectors can result in picture or color problems. Make sure that all connectors are securely inserted into their terminals.  
Terminal  
Connector  
BNC  
VIDEO INPUT  
S-VIDEO INPUT  
COMPONENT VIDEO INPUT  
RGB INPUT  
S terminal  
BNC x 3  
mD-sub 15-pin  
D-sub 9-pin  
RS-232C  
Ferrite cores  
These ferrite cores are used to attenuate undesired signals.  
Two ferrite cores  
When connecting a cable to the component video input terminal, RS-232C terminal, attach one of these ferrite cores to the cable near the  
terminal.  
Ferrite core  
Ferrite core  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
POWER  
INPUT  
COMPONENT  
VIDEO INPUT  
(color difference  
input)  
RGB INPUT  
RS-232C S-VIDEO  
INPUT  
VIDEO  
INPUT  
To receptacle  
To color  
To display  
To RS-232C To S-video  
To video  
output  
terminal  
difference  
output  
terminal  
(analog  
RGB) output  
terminal  
output  
output  
terminal  
terminal  
Connection to AV equipment  
Connection to PC  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATIONS  
TURNING ON THE POWER  
Press  
on the remote  
1
2
control.  
When you do so, the power indicator lamp turns  
green.  
Press  
desired input mode.  
or  
to select a  
* You can also use the  
switches on the displays  
control panel to accomplish  
these steps.  
TURNING OFF THE POWER  
Press  
when the power is ON.  
The power indicator lamp turns red.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SELECTING INPUT MODE  
VIDEO INPUT MODE  
Press  
to select a desired input  
1
mode.  
Each time you press , a different input mode  
appears. The sequence is as follows:  
Video:  
Displays pictures from equipment  
connected to the Video terminal.  
S-video mode  
S-video:  
Displays pictures from equipment  
connected to the S-video terminal.  
Comp.video: Displays pictures from equipment  
connected to the component video  
input terminal.  
* You can switch between video input modes  
while you are in RGB input mode.  
Comp.video mode  
* You can also use the  
switches on the displays  
control panel to accomplish  
these steps.  
RGB INPUT MODE  
Press  
to select a desired input  
1
mode.  
Press the  
to switch to RGB mode.  
RGB: Displays pictures from equipment  
connected to the RGB (mD-sub) terminal.  
* You can switch between RGB input modes  
while you are in a video input mode.  
RGB mode  
* You can also use the  
switches on the displays  
control panel to accomplish  
these steps.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATCHING PICTURES ONTHEWIDE SCREEN  
SWITCHING BETWEEN SCREEN SIZES  
Press  
.
1
2
The currently selected mode will appear.  
Press  
picture mode.  
to select a desired  
Normal mode  
Each time you press , a different picture mode  
appears. The sequences used are as follows:  
When you are in a video and Decoder  
input mode  
When you are in an RGB-PC input mode  
Wide1 mode  
* You can also use the  
switches on the displays  
control panel to accomplish  
these steps.  
* Depending on the type of signal, some aspects  
may not be selected.  
Note  
Displaying a picture in a 4 x 3 mode for extended periods of time may cause phosphor burn-in.  
A variety of picture modes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame  
height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the same  
aspect ratio.  
Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for profit-making  
purposes or for a public audience may constitute a copyright infringement.  
For films, try to select a mode having the same aspect ratio as the original picture; this enables the directors original intentions to be preserved.  
Reference  
See P. 2627 for how to adjust the picture size and position.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SCREEN SIZE  
Normal  
Displays pictures of normal size (i.e., a 4:3 aspect ratio).  
Wide1  
Displays natural-looking pictures of standard size on the wide screen.  
Picture of  
Wide1  
Wide2  
standard size  
Wide2/Wide  
Ideal for displaying vertically extended pictures such as squeezed pictures and recorded  
HDTV programs.  
Vertically  
extended picture  
Zoom1/Zoom  
Enlarges horizontally extended pictures equally in all directions to maintain the aspect  
ratio constant.  
Horizontally  
Zoom1  
Zoom2  
extended picture  
Zoom2  
Reduces the height of horizontally extended pictures with captions, without eliminating  
the caption. Only the height of pictures is reduced, not the height of the caption.  
Horizontally extended  
picture with caption  
(Captions may not be easy to read, however, depending on the picture.)  
ASPECT RATIO  
The following aspect ratios are available.  
4:3 aspect ratio  
4
16:9 aspect ratio  
16  
(VHF/UHF broadcasting, BS broadcasting)  
(HDTV broadcasting)  
3
9
1.85  
2.35  
1.85:1 aspect ratio  
(Vista Vision size)  
1
2.35:1 aspect ratio  
(Cinema Vision size)  
1
Information  
You may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the Vista Vision or Cinema  
Vision size i.e., the sizes used frequently for picture software.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOWTO USE MENUS  
SELECTING OPTIONS IN A MENU  
Use the [MODE] button on the display or  
and  
on the remote control to select a desired input mode.  
Press  
.
1
2
The main menu screen will appear.  
Press  
or  
to switch between sub-menus.  
Ex.: PICTUREselected in the main  
menu screen  
Each time you press or , one of the available menus appears.  
The corresponding menu screen will appear.  
Press  
or  
to select an option for adjustment/setup.  
3
A total of three different menus (PICTURE, POSITION/SIZE, FEATURES, FACTORY DEFAULT) are available.  
You can easily distinguish between these menus as shown below.  
PICTURE  
POSITION/SIZE  
FEATURES  
FACTORY DEFAULT  
*Press  
,
,
or  
to make adjustment/setup, and press  
to store.  
* Do not change input signals when any of the menus are displayed.  
USINGTHE PICTURE MENU  
When you finish selecting a desired option in the PICTURE menu screen, press  
At this time, the adjustment/setup screen for that option will appear.  
.
You can use or to change the value for the option. Press  
Changes you make will be stored only for the selected mode.  
to store. (See P. 2425.)  
PICTURE Menu screen (Video Input Mode)  
PICTURE Menu screen (RGB Input Mode)  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Option  
Function  
Operation  
Range  
(1) Contrast  
Adjusts picture contrast.  
: Higher contrast  
: Lower contrast  
-30 to +30  
(2) Brightness  
Adjusts screen brightness.  
Adjusts color darkness.  
Adjusts tint.  
: Brighter screen  
: Darker screen  
-60 to +60  
-60 to +60  
(3) Color  
(for Video, S-video, Comp.video)  
: Darker colors  
: Lighter colors  
(4) Tint  
: More greenish colors  
: More purplish colors  
-30 to +30 (Video, S-video)  
-60 to +60 (Comp.video)  
(for Video, S-video, Comp.video)  
(5) Sharpness  
Adjusts picture sharpness.  
: Sharper pictures  
: Less sharp pictures  
-16 to +16 (Video, S-video,  
Comp.video, Decoder)  
-4 to +4 (RGB-PC)  
(6) Gamma  
Makes gamma correction.  
Use or for switching.  
Video, S-video, Comp.video  
Dynamic1/Dynamic2/  
Dynamic3  
RGB  
Dynamic1/Dynamic2/  
Dynamic3/Static  
(7) Color Temp.  
Adjusts color temperature.  
Use or for switching.  
Press or to select Red,  
Green or Blue and press or  
Warm/Standard/Cool/User  
(8) User Color Temp.  
Can set up when User is  
selected in Color Temp.  
0 to 255 for each of Red,  
Green and Blue  
to make adjustment.  
USINGTHE POSITION/SIZE MENU  
When you finish selecting a desired option in the POSITION/SIZE menu screen, press  
When you do so, the adjustment screen for that option appears.  
.
Press  
or  
to select option and press or to make adjustment. Press  
to store. (See P. 2627.)  
Changes you make will be stored only for the selected mode.  
POSITION/SIZE Menu screen  
Positionadjustment screen  
Option  
Function  
Operation  
Range  
(1) Position  
Horizontal  
Adjusts screen position.  
Adjusts horizontal position.  
Video, S-video  
Horizontal: -30 to +30  
Vertical  
Zoom: -15 to +15  
Others: -7 to +7  
Comp.video: -16 to +16  
1080i,720p: -32 to +32  
RGB: -150 to + 150  
: Moves screen to the right.  
: Moves screen to the left.  
Vertical  
Adjusts vertical position.  
: Moves screen up.  
: Moves screen down.  
(2) Size  
Width  
Adjusts screen size.  
Adjusts width.  
Video, S-video: -7 to +7  
Comp.video: -4 to +4  
RGB: -25 to +50  
: Increases width.  
: Reduces width.  
Height  
Adjusts height.  
: Increases height.  
: Reduces height.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOWTO USE MENUS (Continued)  
USINGTHE FEATURES MENUS  
FEATURES setup screen has 5 options of Adjustment, Function, On Screen, InputTerminal and Others.  
Options with “ ” on the right  
When you select an option with “ ”, press  
. The adjustment/setup screen for that option appears.(See P. 2836.)  
You can use or on this screen to make selections or changes.Press  
to store.  
Options with no “ ” on the right  
When you select an option with no “ ”, press or to make selections or changes. Press  
to store. (See P. 2836.)  
FEATURES Menu  
FEATURES Menu screen (RGB Input  
Mode)  
Adjustment Menu screen  
Function Menu screen  
On Screen Menu screen  
InputTerminal Menu screen  
Others(1/2) Menu screen  
Adjustment Menu (See P. 29.)  
Option  
Function  
Operation  
Range  
(1) Dot Clock  
(for RGB)  
Adjusts the dot clock.  
Eliminates blur when the  
optimum value is selected with  
-60 to +60  
or  
.
(2) Clock Phase  
(for RGB)  
Adjusts clock phase.  
Eliminates blur when the  
optimum value is selected with  
Auto/Manual  
(Can adjust 1 to 32 for  
Manual)  
or  
.
(3) Vertical Sync  
(for RGB)  
Corrects vertical  
synchronization signal.  
Use or to select the  
optimum value for eliminating  
flicker.  
-1 to +1  
-8 to 8  
(4) Clamp Position  
Adjusts clamp pulse phase.  
Use or for switching.  
(for Comp.video, RGB)  
(5)Auto Calibration  
(for RGB)  
Selects the optimum  
dynamic range of images.  
Display Auto Calibration screen Execute  
and press to execute. Yes/No  
Select Execute, and select Yes  
and press  
to execute  
Auto Calibration.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function Menu(See P. 30.)  
Option  
Function  
Operation  
Range  
(1) Gradation  
(for RGB)  
Makes gradation correction. Use or for switching.  
Motion/Still  
On Screen Menu(See P. 30)  
Option  
Function  
Operation  
Range  
(1) OSD  
Selects whether to display  
information other than  
menus.  
Use or for switching.  
On (displayed)  
Off (not displayed)  
(2) OSD Rotate  
(3) Language  
Rotates on-screen text.  
Use or for switching.  
-90 Deg. (counterclockwise)/  
Normal/  
+90 Deg. (clockwise)  
Selects language used for  
menus.  
Display the “Language”  
selection screen and use  
to select a language.  
English  
or  
Deutsch (German)  
Español (Spanish)  
Français (French)  
Italiano (Italian)  
Português (Portuguese)  
Press  
to display menus  
in the selected language.  
InputTerminal Menu(See P. 31–32.)  
Option  
Function  
Operation  
Range  
(1) Video Input  
(for Video)  
Selects video mode.  
Use or for switching.  
Auto/NTSC/PAL/SECAM/  
PAL60/4.43NTSC  
(2) S-Video Input  
(for S-video)  
Selects video mode.  
Use or for switching.  
Use or for switching.  
Auto/NTSC/PAL/SECAM/  
PAL60/4.43NTSC  
(3) BNC Input  
Can set up Mask of BNC-  
Input (Comp. Video Input)  
Mask  
off/5/10/15  
(4) D-SUB Input  
Selects D-SUB Input  
signal.  
Display D-SUB Input screen  
Function  
RGB-PC/Decoder  
and press  
option.  
or  
to select an  
Use or for switching.  
Use Function to select Decoder  
and set up Mask.  
Mask  
off/5/10/15  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOWTO USE MENUS (Continued)  
Others Menu  
Others Menu screen is divided into the following two screens.  
Others(1/2) Menu screen  
Others(2/2) Menu screen  
Option  
Function  
Operation  
Range  
(1) DPMS  
Specifies time before  
DPMS starts.  
Can specify the background Use or for switching.  
color when specifying time. Can specify background by  
setting time to other than Off.  
Display DPMS screen and press Time  
or  
to select an option.  
Off (disabled)/1 min./  
15 min./45 min./60 min.  
Background  
Black/White  
Press  
to store.  
(2) Screen Orbiter  
(for RGB)  
Sets up screen orbiter.  
Display the Screen Orbiter”  
adjustment screen and use  
to select an option.  
Use or to switch between  
available choices for the  
selected option.  
Mode/Time  
Off (disabled)  
Time (every 1 hr)  
Mode (every time mode is  
switched)  
or  
Moving area  
Min.(moves in small range)  
Std.(moves in moderate  
range)  
Max. (moves in wide range)  
(3) Input Priority  
(4) Monitor No.  
Specifies input mode of  
highest priority.  
Use or for switching.  
Use or for switching.  
Use or for switching.  
Display Code Setting screen  
Off/RGB/Video/S-video/  
Comp.video  
Selects display number.  
0 (no setup)  
1/2/3/4  
(5) Direct Setting  
(for RGB)  
Selects input signal.  
Auto/VGA/WVGA/480P/  
XGA  
(6) Code Setting  
(for RGB)  
Specifies and displays type  
of input signal directly.  
Auto/Manual  
and press  
or  
to select an  
option.  
Select Manual to set up  
Parameter.  
(7) White Screen  
(for RGB)  
Sets up to display white  
over the entire screen.  
Use or for switching.  
Use or for switching.  
Use or for switching.  
Use or for switching.  
On /Off(disabled)  
(8) Exhibitation Mode  
Sets up Exhibition mode.  
On (Exhibition mode)/  
Off(disabled)  
(9) Installation  
Sets up whether horizontal  
or vertical installation.  
Horizontal/Vertical  
(10) Key Lock  
Locks the main unit button.  
On (Key Lock)/  
Off(disabled)  
(11) Information  
Displays system operation  
status.  
Display the Information”  
screen.  
Display only  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USINGTHE FACTORY DEFAULT MENU  
Select FACTORY DEFAULT and execute to restore the adjustment/setting made in the MENU to factory  
settings. (See P. 36.)  
FACTORY DEFAULT Menu screen  
Yes/No selection screen  
Option  
Function  
Operation  
Range  
FACTORY DEFAULT  
Restores the adjustment/  
setting made in the MENU  
to factory settings.  
Select Execute and Yes, and  
press ENTER to restore factory  
settings.  
Yes/No  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTING PICTURES (PICTURE MENU)  
BASIC OPERATIONS [EX.: ADJUSTINGTINT (Tint)]  
You can make changes to all picture adjustment options in the PICTURE Menu.  
The changes you make will be stored for a selected input mode. Therefore, you need to select a desired input mode before making any  
changes.  
Press  
.
1
2
The main menu screen will appear.  
Press  
or  
to select PICTURE.  
PICTUREselected in the main menu  
screen  
Each time you press or , one of the available  
menus appears in the following sequence:  
PICTURE  
POSITION/SIZE  
FEATURES  
FACTORY DEFAULT  
The PICTURE Menu screen will appear.  
Press  
Press  
or  
to select Tint.  
3
4
* You can also use the  
switches on the displays  
control panel to accomplish  
these steps.  
.
The Tintadjustment screen will appear.  
Tintselected in the PICTURE Menu  
screen (Video Input Mode)  
Press  
values.  
or  
to change tint  
5
6
: More greenish colors  
: More purplish colors  
Tintadjustment screen  
Press  
to store.  
Press  
when you finish.  
* Repeat steps 3, 4, 5, and 6 when you wish to  
make changes to other options.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting Contrast (Contrast)  
Any value between -30 and +30 can be selected.  
: Higher contrast  
: Lower contrast  
Press  
to store.  
Adjusting Screen Brightness (Brightness)  
Any value between -60 and +60 can be selected.  
: Brighter screen  
: Darker screen  
Press  
to store.  
Adjusting Color Darkness (Color)  
Any value between -60 and +60 can be selected.  
: Lighter colors  
: Darker colors  
Press  
to store.  
AdjustingTint (Tint)  
Any value between -30 and +30 for [  
: More greenish colors  
], and -60 and +60 for [ ] can be selected.  
: More purplish colors  
Press  
to store.  
Adjusting picture Sharpness (Sharpness)  
Any value between -16 and +16 for [  
: Sharper pictures  
], and -4 and +4 for [ ], can be selected.  
: Less sharp pictures  
Press  
to store.  
Making gamma correction(Gamma)  
You can use this option to make a dynamic gamma correction suitable for still or motion pictures.  
Each time you press or , one of the available choices appears in the following sequence:  
Dinamic 1, 2, 3: Suitable for watching a motion picture.(Use either of better picture quality.)  
Static:  
Press  
Suitable for watching a still picture.  
to store.  
* Can select Static only in RGB mode.  
Adjusting ColorTemperature (Color temp.)  
Use or to specify a desired color temperature. Each time you press or , one of the available choices appears in the following sequence:  
Warm: More reddish colors  
Standard:Standard color temperature  
Cool:  
User:  
More bluish colors  
User Color Temp. setup  
Setting User ColorTemp. (User ColorTemp.)  
Can set up when User is selected in Color Temp.  
Press  
or  
to select Red, Green or Blue and press or to make adjustment in the range  
of 0 to 255.  
* Color Temp. setup is switched to User. The initial value of User Color Temp. is adjusted  
individually at the factory.  
User ColorTemp.adjustment screen  
* On-screen information disappears if you do not take any action for about 60 seconds.  
* The following abbreviations used in this document represent input modes in which you can make adjustments:  
: Video mode, : S-video mode, : Comp.video mode, : RGB-PC mode, : Decoder mode  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU)  
BASIC OPERATION [EX.: ADJUSTING HORIZONTAL DIRECTION OF SCREEN POSITION  
]
You can make changes to all screen adjustment options in the POSITION/SIZE Menu.  
The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any  
changes.  
Press  
.
1
2
The main menu screen will appear.  
Press  
POSITION/SIZE.  
or  
to select  
POSITION/SIZEselected from the main  
menu screen  
Each time you press or , one of the available  
menus appears in the following sequence:  
PICTURE  
POSITION/SIZE  
FEATURES  
FACTORY DEFAULT  
The POSITION/SIZE Menu screen will appear.  
Press  
Position.  
or  
to select  
3
4
* You can also use the  
switches on the displays  
control panel to accomplish  
these steps.  
Press  
.
The Positionadjustment screen will appear.  
Press  
or  
to select  
Horizontalvalues of screen  
position.  
5
6
Press  
.
The Horizontaladjustment screen will appear.  
Positionadjustment screen  
Press  
horizontal values.  
: Moves screen to the right.  
or  
to change  
7
8
:
Moves screen to the left.  
Press  
Press  
to store.  
when you finish.  
* Repeat steps 3 to 8 when you wish to make  
changes to other options.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting Screen Position (Position)  
Horizontal position (Horizontal)  
:
:
Moves screen to the right.  
Moves screen to the left.  
Positionadjustment screen  
Vertical position (Vertical)  
:
Moves screen up.  
Moves screen down.  
to store.  
:
Press  
Adjusting Screen Size (Size)  
Screen width (Width)  
:
:
Increases width.  
Reduces width.  
Sizeadjustment screen  
Screen height (Height)  
:
Increases height.  
Reduces height.  
to store.  
:
Press  
Setting Range  
Video, S-video mode  
Comp.video mode  
RGB mode  
Position  
Horizontal: -30 to +30  
Vertical  
-16 to +16  
-32 to +32(for1080I,720P)  
-150 to +150  
Zoom:  
-15 to +15  
Others: -7 to +7  
Size  
-7 to +7  
-4 to +4  
-25 to +50  
* On-screen information disappears if you do not take any action for about 60 seconds.  
* The following abbreviations used in this document represent input modes in which you can make adjustments:  
: Video mode, : S-video mode, : Comp.video mode, : RGB-PC mode, : Decoder mode  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER ADJUSTMENTS (FEATURES MENU)  
BASIC OPERATION [EX.: SELECTING LANGUAGE (Language)]  
You can make the following changes in the FEATURES Menu.  
Press  
.
1
2
The main menu screen will appear.  
Press  
or  
to select FEATURES.  
FEATURESselected in the main menu  
screen  
Each time you press or , one of the available  
menus appears in the following sequence:  
PICTURE  
POSITION/SIZE  
FEATURES  
FACTORY DEFAULT  
The FEATURES Menu screen will appear.  
Press  
Menu".  
or  
to select "On Screen  
3
4
Select a desired option for adjustment/setup from  
Adjustment, Function, On Screen Menu, Input  
Terminal and Others.  
* You can also use the  
switches on the displays  
control panel to accomplish  
these steps.  
Press  
.
On Screen Menu screen  
On Screen Menu appears.  
Press  
or  
to select Language.  
5
6
Press  
.
The Languageselection screen will appear.  
Languageselection screen  
Press  
language.  
or  
to select the  
7
8
Press  
.
The menu is displayed in the selected language.  
Press  
when you finish.  
* Repeat steps 3 to 8 when you wish to make changes  
to other options.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES setup screen has the  
following 5 options.  
Adjustment  
Function  
: Can make a fine adjustment of pictures such as Dot clock, Clamp position.  
: Can make a function setting such as Gradation. (See P. 30.)  
On Screen Menu : Can make a display setting such as OSD, Language. (See P. 30)  
Input Terminal : Can make an input terminal setting such as Video Input. (See P. 31 - 32.)  
Others  
: Can make other settings. (See P. 32 - 35.)  
ADJUSTMENT  
Adjusting Dot Clock (Dot clock)  
You may find that pictures blur, depending on the clock frequency of your PCs processor. If you  
experience blurring, you can obtain a clearer picture by adjusting the Dot Clock.  
Use or to select a value between -60 and +60.  
Press  
to store.  
Adjusting Clock Phase (Clock Phase)  
You may find that pictures blur, depending on the clock phase of your PCs processor. If you  
experience blurring, you can obtain a clearer picture by adjusting the Clock phase.  
Use  
or  
to select "Auto" or "Manual".  
Makes automatic adjustment.  
Auto:  
Manual: Does not make automatic adjustment.  
Use or to specify a value between 1 and 32.  
When selecting Manual by Clock Phase  
Press  
to store.  
Eliminating Flicker (Vertical Sync)  
Corrects the vertical synchronization signal timing to eliminate vertical flicker.  
Use or to specify a value between -1 and +1.  
Press  
to store.  
Adjusting Clamp Position (Clamp Position)  
Adjusts clamp pulse in accordance with the input signal received from connected equipment.  
Clamp pulse is automatically set at the optimal level when you do not use this option.  
Use or to specify a value between -8 and 8.  
Press  
to store.  
Selecting the Optimum Dynamic Range of Images (Auto Calibration)  
Receives a white screen signal and adjusts the dynamic range of images to the optimum.  
"Auto Calibration" setting screen  
(1) Select Auto Calibration and press  
Auto Calibration screen appears.  
(2) Select Execute and press  
.
.
Press  
Yes: Stores the data of Auto Calibration.  
No: Disables the execution result of Auto Calibration.  
or  
to select Yes or No.  
(3) Press  
to execute.  
"Yes/No" selection screen  
* On-screen information disappears if you do not take any action for about 60 seconds.  
* The following abbreviations used in this document represent input modes in which you can make adjustments:  
: Video mode, : S-video mode, : Comp.video mode, : RGB-PC mode, : Decoder mode  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER ADJUSTMENTS (FEATURES MENU)(Continued)  
FUNCTION  
Correcting gradation (Gradation)  
You can use this option to make gradation corrections suitable for still or motion pictures.  
Each time you press or , one of the available choices appears in the following sequence:  
Motion  
Still  
Motion : Suitable for watching motion pictures.  
Still : Suitable for watching still pictures.  
Press  
to store.  
ON SCREEN MENU  
Setting Display Information (OSD)  
All modes  
You can use this option to select whether to display information other than menus. (Error messages  
are displayed regardless of what choice you make for this option.)  
Each time you press , one of the available choices appears in the following sequence:  
On  
Off  
On : Displays all information.  
Off : Displays only menus and error messages.  
Press  
to store.  
When rotating text (for installing the display with one of its sides facing down)  
Rotating text (OSD Rotate)  
All modes  
You can use this option to rotate the text.  
Each time you press or , one of the available choices appears in the following sequence:  
-90 Deg. : Displays text from left to right when the display is installed with the power indicator lamp at the top.  
Normal : Displays text normally.  
+90 Deg. : Displays text from left to right when the display is installed with the power indicator lamp at the bottom.  
Press  
to store.  
Selecting Language (Language)  
All modes  
You can use this option to select the language displayed on the screen.  
(1) Select Languageand press  
The Languageselection screen will appear.  
(2) Press or to select your desired language.  
English  
.
Deutsch (German)  
Español (Spanish)  
Français (French)  
Italiano (Italian)  
"Language" selection screen  
Português (Portuguese)  
(3) Press  
.
The menu is displayed in the selected language.  
* On-screen information disappears if you do not take any action for about 60 seconds.  
* The following abbreviations used in this document represent input modes in which you can make adjustments:  
: Video mode, : S-video mode, : Comp.video mode, : RGB-PC mode, : Decoder mode  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INPUT TERMINAL  
SelectingVideo Mode (Video Input)  
You can use this option to select the desired video mode of pictures it will receive to the Video Input  
terminal.  
Each time you press or , one of the available modes appears in the following sequence:  
Auto: Automatically selects the video system.  
(Does not automatically select other signal than NTSC, PAL and SECAM.)  
Other than Auto: You need to select a system appropriate to the input signal.  
Press  
to store.  
SelectingVideo Mode (S-Video Input)  
You can use this option to select the desired video mode of pictures it will receive to S-Video Input  
terminal.  
Each time you press or , one of the available modes appears in the following sequence:  
Auto: Automatically selects the video system.  
(Does not automatically select other signal than NTSC, PAL and SECAM.)  
Other than Auto: You need to select a system appropriate to the input signal.  
Press  
to store.  
Masking BNC Input (Comp.Video Input) (BNC-Input)  
All modes  
You can use this option to mask the signal it will receive to BNC-Input Terminal(Comp. Video  
Input).  
Each time you press or , one of the available choices appears in the following sequence:  
Off:  
Does not mask.  
Number: Masks the fringe (top, bottom, right and left) of the screen by the number of pixels  
specified.  
"BNC-Input" selection screen  
Press  
to store..  
* Depending on the input signal, unnecessary information may be displayed in the fringe of the  
screen. Setup mask if you do not want to see such information.  
This fringe part is masked.  
* On-screen information disappears if you do not take any action for about 60 seconds.  
* The following abbreviations used in this document represent input modes in which you can make adjustments:  
: Video mode, : S-video mode, : Comp.video mode, : RGB-PC mode, : Decoder mode  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER ADJUSTMENTS (FEATURES MENU)(Continued)  
INPUT TERMINAL  
Selecting D-SUB Input (D-SUB Input)  
All modes  
You can use this option to select the signal system it will receive to D-SUB Input terminal.  
(1) Select D-SUB Input and press  
D-SUB Input screen appears.  
.
(2) Select the signal system to receive.  
Each time you press or , one of the available choices appears in the following sequence:  
RGB-PC Decoder  
"D-SUB Input" selection screen  
RGB-PC: For using RGB for PC  
Decoder: For using digital broadcast tuner  
(3) Press  
or  
to select Function.  
(4) Select Decoder by FUNCTION to set up Mask.  
Each time you press or , one of the available choices appears in the following sequence:  
Off:  
Does not mask.  
Number: Masks the fringe (top, bottom, right and left) of the screen by the number of pixels specified.  
(5) Press  
to store.  
OTHERS MENU  
Selecting time before DPMS starts (DPMS)  
All modes  
You can use this option to select the amount of time before the DPMS function starts.  
DPMS (which stands for display power management signaling) allows the display to maintain an  
automatic power saving function.  
This function causes on-screen information to disappear until the next input operation, if the power  
is ON and the display has not received any signals for the predetermined period of time. When  
DPMS is active, the power indicator lamp turns orange.  
(1) Select DPMS and press  
DPMS screen appears.  
.
DPMS selection screen  
(2) Press  
or  
to select Time.  
(3) Each time you press or , one of the available choices appears in the following sequence:  
Off:  
Disables DPMS  
Number: Approximate time before DPMS starts. (Unit: minutes)  
* The power indicator lamp turns orange while the DPMS is ON.  
* The power turns ON automatically when the display receives a signal.  
(4) Can specify background color.  
Press  
Each time you press or , one of the available choices appears in the following sequence:  
Black White  
or  
to select background color.  
Black: Mutes images in Black background.  
White:Mutes images in White background.  
* Switches approx. 20 seconds after the display stops receiving signals.  
(5) Press  
to store.  
* On-screen information disappears if you do not take any action for about 60 seconds.  
* The following abbreviations used in this document represent input modes in which you can make adjustments:  
: Video mode, : S-video mode, : Comp.video mode, : RGB-PC mode, : Decoder mode  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Minimizing phosphor burn-in (Screen Orbiter)  
You can use this option to move the screen position to minimize phosphor-induced burning.  
Follow the steps below.  
(1) Select Screen Orbiterand press  
The Screen Orbitersetting screen will appear.  
(2)Press or to select Mode/Time.  
.
(3)Select a desired pattern.  
Screen Orbitersetting screen  
Each time you press or , one of the available choices appears in the following sequence:  
Off: Disables Screen Orbiter.  
Time: Moves the pattern approximately every one hour.  
Mode: Moves the pattern when the power is turned ON or when you switch between modes.  
(4)Press  
or  
to select Moving Area.  
(5) Press or to select the range for moving the pattern.  
Each time you press or , one of the available choices appears in the following sequence:  
Min.: Pattern moves in small range. (About 5 pixels)  
Std.: Pattern moves in moderate range. (About 10 pixels)  
Max.: Pattern moves in wide range. (About 15 pixels)  
(6) Press  
to store.  
Using screen protection functions (examples)  
The screen protection functions minimize phosphor burn-in but cannot completely eliminate it.  
When using the display occasionally  
When using the display continuously  
Select a desired amount of time for DPMS.  
When switching between RGB and video input modes only  
occasionally  
(1) Select Timefor Mode/Timewith Screen Orbiter.  
(2) Select a desired range for Moving Areawith Screen Orbiter.  
This causes the screen saver pattern to move in the same range at  
regular intervals.  
Thus, when the display does not receive a signal, it will automatically  
display white or black over the entire screen. When the predetermined  
time elapses, the power will turn OFF.  
When switching between RGB and video input modes  
frequently  
(1) Select Modefor Mode/Timewith Screen Orbiter.  
(2) Select a desired range for Moving Areawith Screen Orbiter.  
When the mode is switched from Video to RGB, the display position  
moves.  
Input mode of priority (Input priority)  
All modes  
You can use this option to switch between modes only when a signal is received through the  
selected input mode terminal. You cannot switch the input mode.  
Each time you press or , one of the available choices appears in the following sequence:  
Off:  
Switches between modes normally.  
Other modes: Displays pictures when a signal is received through the selected input mode terminal.  
Press  
to store.  
* On-screen information disappears if you do not take any action for about 60 seconds.  
* The following abbreviations used in this document represent input modes in which you can make adjustments:  
: Video mode, : S-video mode, : Comp.video mode, : RGB-PC mode, : Decoder mode  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER ADJUSTMENTS (FEATURES MENU)(Continued)  
Assigning Numbers to Displays (Monitor No.)  
All modes  
When you use two or more displays, you can use a single remote control to control individual  
displays by assigning a unique number to each of the displays.  
Each time you press or , one of the available numbers appears in the following sequence:  
0: You can normally control displays.  
You cannot control displays if you press any of [SHIFT 1] through [SHIFT 4].  
14: Allows you to control a desired display by pressing the corresponding button (one of  
[SHIFT 1] through [SHIFT 4]).  
When you do not press any of the SHIFT buttons, you can control all displays.  
Press  
to store.  
* You can check the Monitor No.on the Information screen.  
Setting RGB Input Signal Compulsorily (Direct Setting)  
You can use this option to switch the setting for RGB input signal.  
Each time you press or , one of the available choices appears in the  
following sequence:  
Auto: Automatically displays the input signal to the optimum.  
VGA: Fixes the setting for the optimum resolution for VGA.  
WVGA: Fixes the setting for the optimum resolution for WVGA.  
480P: Fixes the setting for the optimum resolution for 480P.  
XGA: Fixes the setting for the optimum resolution for XGA.  
Press  
to store.  
* In Auto mode, the resolution of VGA, WVGA, 480P and XGA may not be automatically  
distinguished. Switch to the fixed display when the image is not displayed properly.  
Specifying RGB Input Signal Directly (Code Setting)  
You can use this option to specify and display the type of RGB input signal directly.  
Each time you press  
sequence:  
or  
, one of the available choices appears in the following  
Auto  
Manual  
Auto: Automatically displays the input signal to the optimum.  
Manual: Selects RGB code number.  
"Code Setting" setting screen  
Press  
to store.  
* In Auto mode, the optimum resolution may not be set up automatically depending on the type of  
signal.  
Select the type of signal when the image is not displayed properly.  
However, note that when the type of signal is selected directly, the signal of other resolution may  
not be displayed properly.  
Displaying white over entire screen (White screen)  
All modes  
You can use this option to display white over the entire screen, so that brightness adjustments can be  
performed to minimize phosphor burn-in.  
Each time you press or , one of the available choices appears in the following sequence:  
On  
Off  
Off: Does not display white.  
On: Displays a white screen immediately.  
Press  
to execute.  
* On-screen information disappears if you do not take any action for about 60 seconds.  
* The following abbreviations used in this document represent input modes in which you can make adjustments:  
: Video mode, : S-video mode, : Comp.video mode, : RGB-PC mode, : Decoder mode  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Exhibition Mode (Exhibition Mode)  
All modes  
You can use this option to display the enhanced contrast, which is most suitable for the use by  
unspecified persons.  
Each time you press or , one of the available choices appears in the following sequence:  
On  
Off  
On: Sets up Exhibition mode.  
Off: Sets up normal mode.  
Press  
to store.  
* In Exhibition mode, the display returns to the original setting in about 5 minutes even if the  
adjustment is changed.  
* The setup will be cancelled when removing the power plug from the receptacle.  
Horizontal/Vertical installation (Installation)  
All modes  
You can use this option to setup the number of fan rotation, etc. for horizontal and vertical  
installation.  
Each time you press or , one of the available choices appears in the following sequence:  
Horizontal  
Vertical  
Horizontal:For installing horizontally  
Vertical:For installing vertically  
Press  
to store.  
* Be sure to make this setup when changing the direction of installation.  
Locking Main Unit Button (Key Lock)  
All modes  
You can use this option to disable the main unit button.  
Each time you press or , one of the available choices appears in the following sequence:  
On Off  
On: Disables the main unit button.  
Off: Enables the main unit button.  
Press  
to store.  
Displaying System Status (Information)  
Displays system operation status.  
Select Informationand press  
.
The Informationscreen will appear.  
Mode:  
Input mode appears at the upper right corner of the screen.  
Monitor number  
Monitor No.:  
Freq. Scan Mode: Frequency scanning  
Information screen (Video Input Mode)  
Input Signal:  
Input sync.:  
Freq.:  
Video mode  
Signal type  
Frequency and polarity (fH, fV)  
Preset No.:  
RGB code number (  
,
only)  
Information screen (RGB Input Mode)  
* On-screen information disappears if you do not take any action for about 60 seconds.  
* The following abbreviations used in this document represent input modes in which you can make adjustments:  
: Video mode, : S-video mode, : Comp.video mode, : RGB-PC mode, : Decoder mode  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INITIALIZATION OF USER ADJUSTMENTVALUE(FACTORY DEFAULT)  
You can restore the values of the adjustment/setting made in the MENU to factory settings.  
Press  
.
1
2
The main menu screen will appear.  
Press  
DEFAULT.  
or  
to select FACTORY  
FACTORY DEFAULTselected in the  
main menu screen  
Each time you press or , one of the available  
menus appears in the following sequence:  
PICTURE  
POSITION/SIZE  
FEATURES  
FACTORY DEFAULT  
The FEATURES Menu screen will appear.  
Press  
.
3
Displays the message of whether to proceed  
with the initialization.  
* You can also use the  
switches on the displays  
control panel to accomplish  
these steps.  
Press  
or  
to select theYes.  
4
5
Displays the message of whether to  
proceed the initialization  
Press  
.
The message of having completed the  
initialization will be displayed after initializing.  
Press  
when you finish.  
Displays the message of having  
completed the initialization  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPTIONS  
Wall-mounting unit  
(for both vertical and horizontal)  
Vertical: 0° to 5° mounting angle  
P-42WB12  
P-42CT11  
P-42TT29  
Horizontal: 0° to 15° mounting angle  
Hanging unit  
0° to 15° mounting angle (variable)  
The pipe is not supplied with the ceiling-  
hanging unit, so consult your produce dealer.  
Stand  
* When installing an option, make sure that all installation requirements for that option (as given in the relevant instruction manual) are met.  
* The colors of options do not match the display colors perfectly.  
Warning  
To prevent injury, fire, and electric shock, arrange for options to be initially installed (or installed at a different location) by your dealer.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FACTORY SETTINGS  
This display can store parameter settings for four additional signals for RGB.  
To do this, select a desired signal and follow the instructions in Adjusting Screen Position and Sizeon P. 2627 to adjust the  
parameters. When you finish, the settings will be automatically stored. Thus, when the display receives that signal, pictures will be  
displayed in accordance with the settings you most recently selected.  
Main corresponding signals (RGB-PC mode)  
Display (dots x lines)  
852 x 480  
640 x 480  
640 x 480  
Horizontal frequency (kHz)  
Vertical frequency (Hz)  
Signal  
31.72  
31.47  
37.86  
37.50  
43.27  
31.47  
37.88  
48.08  
48.88  
53.67  
48.36  
56.48  
60.02  
35.00  
31.02  
15.73  
15.63  
31.50  
59.97  
59.94  
72.81  
75.00  
85.01  
70.09  
60.32  
72.19  
75.00  
85.06  
60.00  
70.07  
75.03  
66.67  
60.00  
59.94  
50.00  
70.15  
When a dedicated graphics card is used  
VGA  
VGA 72 Hz  
640 x 480  
VGA 75 Hz  
640 x 480  
VGA 85 Hz  
720 x 400  
VGA 400 lines  
SVGA 60 Hz  
SVGA 72 Hz  
SVGA 75 Hz  
SVGA 85 Hz  
XGA 60 Hz  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
1024 x 768  
1024 x 768  
1024 x 768  
640 x 480  
848 x 480  
640 x 480  
640 x 480  
640 x 400  
XGA 70 Hz  
XGA 75 Hz  
MAC 13RGB  
60 fields  
50 fields  
NEC 31 kHz  
* With some input signals, Out of rangemay appear even when the horizontal and vertical frequencies are within their permissible ranges. Make  
sure that the vertical frequency of the input signal is 85 Hz or less for SVGA and 75 Hz for XGA.  
In the Comp.video and Video/S-video modes, the display has been factory-set as follows for different input signals:  
Main corresponding signals (Comp.Video, Decoder mode) Main corresponding signals (Video, S-Video mode)  
Horizontal  
Vertical  
Horizontal  
Vertical  
Signal  
Signal  
NTSC  
frequency (kHz)  
frequency (Hz)  
frequency (kHz)  
frequency (Hz)  
15.73  
15.63  
31.47  
31.25  
45.00  
37.50  
33.75  
28.13  
59.94  
50.00  
59.94  
50.00  
60.00  
50.00  
60.00  
50.00  
SDTV 480I  
SDTV 576I  
SDTV 480P  
SDTV 576P  
HDTV 720P  
HDTV 720P  
HDTV 1080I  
HDTV 1080I  
15.73  
15.63  
15.63  
15.73  
15.73  
59.94  
50.00  
50.00  
59.94  
59.97  
PAL  
SECAM  
PAL60  
4.43NTSC  
With the 800 x 600 and 1024 x 768 modes, pictures of reduced size are displayed on the screen, using size reduction and interpolation. Note also  
that on-screen information is also displayed in reduced size.  
• “Out of rangeappears if the display receives a signal whose characteristic does not fall within the displays permissible range.  
You can check input signals through Informationon the FEATURES Menu screen. (See P. 35.)  
All terms (i.e., company and product names) used in this document are trademarks or registered trademarks.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATION  
Model  
PDS4229W  
Screen size  
42" wide screen: 92.0 cm (W) x 51.8 cm (H) (105.6 cm diagonal)  
36.2 inch (W) x 20.4 inch (H) (41.6 inch diagonal)  
Aspect ratio  
16:9 (wide)  
Weight  
28.5 kg / 62.8 lbs  
Outer dimensions  
Power supply  
103.5 (W) x 64.0 (H) x 8.5 (D) cm / 40.7 (W) x 25.2 (H) x 3.3 (D) inch  
100240 VAC 50/60 Hz  
Power consumption  
Screen dimensions  
Number of pixels  
Display modes  
3.5 A (800 VA: Power ON, instantaneous power when outputting picture)  
92.0 (W) x 51.8 (H) cm / 36.2 (W) x 20.4 (H) inch  
852 (H) x 480 (V)  
Video, S-Video input:  
Normal/Wide1/Wide2/Zoom1/Zoom2  
Component Video input: Normal/Wide1/Wide2/Zoom1/Zoom2  
RGB-PC:  
Decoder:  
Normal/Wide/Zoom  
Normal/Wide1/Wide2/Zoom1/Zoom2  
Colors  
16.77 million (for each of 256 RGB gradations)  
External equipment terminals  
Video input terminals  
Video input  
1 BNC terminal 1 Vp-p/75 Ω  
S-video input  
1 S terminal  
Y:  
C:  
1 Vp-p/75 Ω  
0.3 Vp-p/75 Ω  
Component video input (color difference input) 3 BNC terminals Y:  
1 Vp-p/75 Ω  
Pb/B-Y: 0.7 Vp-p/75 Ω  
Pr/R-Y: 0.7 Vp-p/75 Ω  
Applicable systems  
PC input terminal  
NTSC/PAL/SECAM/PAL60/4.43NTSC  
RGB input terminal mD-sub, 3 rows, 15-pin  
Picture signal: 0.7 Vp-p/75 Ω  
Synchronization signal: TTL level  
Control terminal  
1 RS-232C connector (D-sub 9-pin)  
Operating conditions  
Temperature: 0 to 40 °C / 32 to 104 °F  
Humidity:  
20 to 90 %  
Accessories  
1 remote control, 2AA batteries, 1 instruction manual, 1 power cable, 2 ferrite cores  
Regulation PDS4229W  
UL, CSA Safety: UL1950/CSA C22.2 No.950  
EMC: FCC Part 15 Class A, ICES-003 Class A  
CE Safety: EN60950 1992, A1: 1993, A2: 1993, A3: 1995, A4: 1997  
EMC: EN55022  
EN61000-3-2 1995  
EN61000-3-3 1995  
EN55024 1998  
1994, Class A  
EN61000-4-2 1995  
EN61000-4-3 1996  
EN61000-4-4 1995  
EN61000-4-5 1995  
EN61000-4-6 1996  
EN61000-4-8 1993  
EN61000-4-11 1994  
AS Safety: IEC60950 A1/A2/A3/A4  
EMC: AS/NZS 3548  
Specifications and external appearance may be change for the sake of improvement.  
is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CLEANING AND MAINTENANCE  
Precautions  
Cleaning the Screen  
Be sure to remove the power plug from the receptacle before  
cleaning the display.  
Clean the screen gently with a soft cloth.  
The screen surface is fragile. Never attempt to clean it with a hard  
material, press on it forcefully, or tap it.  
Be sure not to clean the display using a cloth dampened with  
volatile solvents, such as benzene or thinner. Such solvents can  
harm the displays cabinet, the filter at the screen front, and the  
remote control. They can also cause paint to come off these  
sections.  
Cleaning the ventilation grille  
Remove dust from the ventilation grille in the rear of the main unit  
periodically with a vacuum cleaner as the accumulated dust can  
increase the internal temperature of the main unit causing machine  
failure or fire hazard.  
Cleaning the Cabinet and Remote Control  
Use a soft cloth for cleaning.  
If the cabinet or remote control is heavily stained, soak a soft cloth  
in a mixture of water and detergent and squeeze it dry before  
wiping off the stains. Use a soft, dry cloth for final cleaning.  
HANDYTIPS  
In the event of problems with the display, check the following explanations before contacting your dealer for servicing.  
Problem  
Power does not turn ON.  
No pictures are displayed.  
Action  
Check whether the power plug is securely inserted into the receptacle.  
Check cables for disconnection.  
Check whether the power for all input equipment is ON.  
Check for connection to wrong terminals or for wrong input mode.  
Check whether the input mode display is colored pink.Special setup may have been  
made. Return to original setup or initialize the User adjustment value.  
Remote control does not function properly. Check for incorrect battery orientation.  
Check for dead batteries.  
Check for distance from the display.  
Check whether you are pointing the remote control transmitter properly at the displays  
receiver.  
Check for any obstacle between the remote control and the display.  
The display makes a snapping sound.  
The display makes a buzzing sound.  
There are spots on the screen.  
Degraded colors/tints  
This sound is produced when the cabinet expands or contracts due to variations in  
temperature. This sound does not indicate that the display has a problem.  
The display has a fan to maintain the temperature of internal components at a constant  
level. This sound is produced by the fan as it rotates.  
Check whether your AV equipment is affected by interference from automobiles, trains,  
high-voltage transmission lines, neon signs or other potential sources of interference.  
Check whether all picture adjustments have been properly made.  
(See Adjusting Pictureson P. 2425.)  
Improper screen position/size  
Check whether screen position and size have been properly adjusted.  
(See Adjusting Screen Position and Sizeon P. 2627.)  
If Invalid operationappears.  
Check whether you have selected Input Priority.(See Featureson P. 33.)  
If Out of rangeappears, the display is  
receiving a signal whose picture or signal  
cannot be reproduced by the display.  
Input proper signals.  
Make sure that the vertical frequency of the input signal is 85 Hz or less for SVGA and  
75 Hz or less for XGA.  
The screen turns to black and white.  
Input proper signals.  
Make sure that the vertical frequency of the input signal is 85 Hz or less for SVGA and  
75 Hz or less for XGA.  
If Error message Condition 1appears,  
Remove the power plug from the receptacle, and contact your dealer for repairs.  
the fan is defective.  
If Error message Condition 2appears,  
the displays internal components are  
extremely hot.  
Remove the power plug from the receptacle. (You can turn the power back ON again  
when the components have cooled sufficiently.) If the message appears again when you  
turn the power back on, remove the power plug from the receptacle, and contact your  
dealer for a repairs.  
Remove the power plug from the receptacle, and inform your dealer about how the lamp  
flashed.  
If the power indicator lamp flashes red.  
As explained below, the power indicator lamp flashes differently depending on the type  
of problem:  
Flashes repeatedly: Improper supply voltage level  
Flashes once: Malfunction by the fan  
Flashes twice: Excessive temperature  
Flashes three times or more: Other problems  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1116, Suenaga, Takatsu-ku, Kawasaki 213-8502, Japan  
8111602007  
Printed in Japan  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Faber Ventilation Hood 6044787 User Manual
FIC Laptop M295 User Manual
Fisher Paykel Ventilation Hood HC60PCIX2 User Manual
Gateway Computer Monitor VX730 User Manual
GE Clock Radio 7 4882 User Manual
GE Cordless Telephone 26934 User Manual
GE Heat Pump AZ39H12EAC User Manual
GE Microwave Oven ZET1PMSS User Manual
Genicom Printer 3400e User Manual
GE Range 164D4290P075 1 User Manual