Fujitsu Flat Panel Television PDS4204E H User Manual

USER’S MANUAL  
PDS4204W-H/PDS4204E-H (WITH PC CARD)  
42” WIDE PLASMA DISPLAY  
Contents  
Page  
Page  
Before Use  
Adjustments  
VIDEO Mode  
• Video Adjustments ·······································28-29  
• Screen Adjustments ·····································30-31  
• Input Source Adjustments ····························32-33  
• Other Adjustments ·······································34-35  
• Safety Precautions··········································3-4  
• Features····························································· 5  
• Accessories························································ 6  
• What You Should Know ··································7-8  
• Preventing Equipment from Falling···················· 9  
RGB Mode  
Usage  
• Video Adjustments ·······································36-37  
• Screen Adjustments ·····································38-39  
• Input Source Adjustments ····························40-41  
• Other Adjustments ·······································42-43  
PC CARD Mode  
• Video Adjustments ·······································44-45  
• Other Adjustments ·······································46-47  
• Names of Parts and Their Functions ·········10-13  
• Basic Operations·············································· 14  
• Using PC Card ············································15-19  
• Viewing Wide Screen (VIDEO Mode) ·········20-21  
• Viewing Wide Screen (RGB Mode)·············22-23  
Handy Functions  
• On-Screen Display Setting······························· 24  
• Internal Speaker Setting ·································· 25  
• WHITE BALANCE Setting ······························· 26  
• DPMS and Display Language Setting·············· 27  
Others  
• Personal Computers that Can be Connceted ··· 48  
• Optional Products ············································· 49  
• Specifications ···············································50-51  
• Care and Maintenance······································ 52  
Before using the display, read this manual carefully so that you know how to use the display correctly.  
Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precau-  
tions.  
Keep this manual where the user can see it easily.  
Installation and removal require special expertise. Consult your product dealer for details  
FUJITSU GENERAL LIMITED  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FCC NOTICE  
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the  
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment  
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if  
not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.  
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be  
required to correct the interference at his own expense.  
IMPORTANT INFORMATION  
WARNING: This is Class A product. In a domestic environment this product may cause radio  
interference in which case the user may be required to take adequate measures.  
WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE  
THIS PRODUCT TO RAIN OR MOISTURE.  
IMPORTANT SAFEGUARDS  
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to  
assure your personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR  
FIRE HAZARD. In order not to defeat the safeguards incorporated into this product, observe the following  
basic rules for its installation, use and service. Please read these “Important Safeguards” carefully before use.  
All the safety and operating instructions should be read before the product is operated.  
The safety and operating instructions should be retained for future reference.  
All warnings on the product and in the operating instructions should be adhered to.  
All operating instructions should be followed.  
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a  
damp cloth for cleaning.  
Do not use attachments not recommended by the product manufacturer as they may be hazardous.  
Do not use this product near water. Do not use immediately after moving from a low temperature to high  
temperature, as this causes condensation, which may result in fire, electric shock, or other hazards.  
Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a  
child or adult, and serious damage to the product. The product should be mounted according to the manufacturer’s  
instructions, and should use a mount recommended by the manufacturer.  
When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and uneven  
surfaces which may cause the product and cart to overturn, damaging equipment or causing possible  
injury to the operator.  
Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the product and  
protect it from overheating. These openings must not be blocked or covered. (The openings should never be  
blocked by placing the product on bed, sofa, rug, or similar surface. It should not be placed in a built-in installa-  
tion such as a bookcase or rack unless proper ventilation is provided and the manufacturer’s instructions have  
been adhered to.)  
For proper ventilation, separate the product from other equipment, which may prevent ventilation and keep  
distance more than 10cm.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY PRECAUTIONS  
This product should be operated only with the type of power source indicated on the label. If you are not sure of  
the type of power supply to your home, consult your product dealer or local power company.  
This product is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you are  
unable to insert the plug into the outlet, contact your electrician to install the proper outlet. Do not defeat the  
safety purpose of the grounded plug.  
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon  
or against them. Pay particular attention to cords at doors, plugs, receptacles, and the point where they exit from  
the product.  
For added protection of this product during a lightning storm, or when it is left unattended and unused for long  
periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the  
product due to lightning and power line surges.  
Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result  
in a risk of fire or electric shock.  
Never push objects of any kind into this product through openings as they may touch dangerous voltage points  
or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.  
Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous  
voltages and other hazards. Refer all service to qualified service personnel.  
Unplug this product from the wall outlet and refer service to qualified service personnel under the following  
conditions:  
a) When the power supply cord or plug is damaged.  
b) If liquid has been spilled, or objects have fallen on the product.  
c) If the product has been exposed to rain or water.  
d) If the product does not operate normally by following the operating instructions. Adjust only those controls  
that are covered by the Operation Manual, as an improper adjustment of other controls may result in damage  
and will often require extensive work by a qualified technician to restore the product to its normal operation.  
e) If the product has been dropped or damaged in any way.  
f) When the product exhibits a distinct change in performance – this indicates a need for service.  
When replacement parts are required, be sure the service technician has used replacement parts specified by  
the manufacturer or with same characteristics as the original part. Unauthorized substitutions may result in fire,  
electric shock, or other hazards.  
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to  
determine that the product is in proper operating condition.  
The product should be placed more than one foot away from heat sources such as radiators, heat registers,  
stoves, and other products (including amplifiers) that produce heat.  
When connecting other products such as VCR’s, and personal computers, you should turn off the power of this  
product for protection against electric shock.  
Do not place combustibles behind the cooling fan. For example, cloth, paper, matches, aerosol cans or gas  
lighters that present special hazards when over heated.  
Use only the accessory cord designed for this product to prevent shock.  
The power supply voltage rating of this product is AC100-240 V, the power cord attached conforms to the  
following power supply voltage. Use only the power cord designated by our dealer to ensure Safety and EMC.  
When it is used by other power supply voltage, power cable must be changed.  
Consult your product dealer.  
Power cord  
Power supply voltage: AC 100-125V  
AC 200-240 V  
AC 240 V (SAA TYPE)  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
PRESENTATIONS WITHOUT USE OF PERSONAL COMPUTER  
• Presentations need only the PC card.  
• Presentations can be made in either auto mode, or manual mode  
using remote controller.  
• In auto mode, RGB, color difference and images or voice connected  
to the video terminal are automatically output.  
PC Card  
PROGRAMS EASY TO CREATE  
• Programs can easily be created using a personal computer and the supplied "Program Creation Software".  
• Use a PC card recommended by Fujitsu.  
VERTICAL INSTALLATION  
• The dynamic vertical screen is obtained by installing the Plasmavision vertically.  
IDEAL FOR PERSONAL COMPUTER DISPLAY  
• The Plasmavision supports VGA full display and SVGA compressed display.  
A VARIETY OF INPUT TERMINALS  
• The high quality image color difference signals such as DVD etc. can be input in addition to the video, S-video, and  
RGB.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACCESSORIES  
Checking Accessories  
Cable clamper × 2  
Power cord  
PDS4204W-H × 3  
Remote controller × 1  
AA battery × 2  
PDS4204E-H × 1  
USER’S  
MANUAL  
Screw A (10 mm)  
Screw B (20 mm)  
A
B
User’s Manual × 1  
Bracket × 2 (2 type)  
Screw × 2 (2 type)  
Key × 2  
OPERATING  
GUIDE  
Floppy Disk for Installing  
PC Card Utility for  
Operating Guide × 1  
Plasmavision × 3  
Cable clampers  
Bundle connecting cables so  
that they lead downwards, as  
in the illustration.  
• The accessory cable clampers are for fastening the connected  
signal cables and a power cable. When installing this display  
on a wall or ceiling, insert the cable clampers into the holes on  
the rear of the display.  
Cable clamper  
(Attach as in the illustration.)  
Connecting to External Equipment  
Cables for connecting external equipment must be  
purchased separately.  
Connectors  
AUDIO INPUT  
VIDEO INPUT  
S-VIDEO INPUT  
COMPONENT VIDEO INPUT  
RGB INPUT  
Pin jack  
BNC  
S terminal  
BNC  
SYNC SW  
TTL/ANALOG (75)  
15-pin mD-sub  
9-pin D-sub  
RS-232C  
AUDIO INPUT  
RS-232C  
When connecting separately pur-  
chased BNC terminals, conversion  
connectors are required between the  
pin jacks and the BNC terminals, so  
purchase these also.  
RGB INPUT  
VIDEO INPUT  
COMPONENT  
VIDEO INPUT  
(color difference  
input)  
S-VIDEO  
INPUT  
Cables connecting the personal com-  
puter vary according to the type of  
machine, so consult your product  
dealer.  
Display  
(to analog  
RGB  
output  
terminal)  
To video  
output  
terminal  
To S-video  
output  
terminal  
To audio  
output  
terminal  
To RS-232C  
terminal  
To component  
video output  
terminal  
Connecting to PC  
Connecting to AV equipment  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
WHAT YOU SHOULD KNOW  
POINTS ABOUT USAGE  
• When installing this machine, use the optional desktop stand, wall-mounting unit, or ceiling mounting unit. Have  
the installation done by your product dealer.  
• When installing the display, refer to the installation manuals for the options. Further, be sure that the display does  
not lean to the side or backward.  
• Place the power cord and connection cables in a corner of the wall or floor so that they do not get caught on  
anything  
• For good heat dissipation, the Plasmavision requires at least the space shown in the figure below.  
• The installation location must have an ambient temperature range of 0 °C – 40 °C.  
See page 49 for optional parts.  
When desktop stand used  
Front view  
Side view  
Upper  
5 cm  
20 cm  
15cm  
15cm  
Left  
Right  
Wall  
5 cm  
Floor  
Floor  
Desktop stand  
When wall-mounting unit used (horizontally)  
When ceiling-mounting  
unit used  
Front view  
Side view  
Side view  
Ceiling  
Upper  
20 cm  
Ceiling  
20 cm  
Wall mounting unit  
mounting unit  
10 cm  
Right  
10 cm  
Left  
Wall  
Wall  
10 cm  
Lower  
5 cm  
5 cm  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
WHAT YOU SHOULD KNOW  
When wall-mounting unit used (vertically)  
Front view  
Side view  
Upper  
Wall mounting  
(vertical usage)  
15 cm  
Wall  
10 cm  
Left  
10 cm  
Right  
10 cm  
Lower  
5 cm  
Power lamp  
• When mounting the Plasmavision vertically, make sure that the power lamp is at the lower right.  
Notes  
• Do not display the same picture (pattern) continuously for a long time. Doing so raises the brightness of the picture and may  
cause after-images.  
• Looking at the picture continuously for a long time can tire the eyes. View the display from a reasonable distance (about three  
times the length of the screen).  
If something is wrong with the Plasmavision internally, the built-in protection circuit will cut the power automatically. If so, the  
power lamp will blink in red, indicating a malfunction.  
• If the power lamp is blinking red, it is warning that something is wrong with the Plasmavision. There is a danger of fire or  
electrical shock, so be certain to unplug the power cord and contact your product dealer. (See P52)  
• The plasma display panel has been built using extremely precise and sophisticated technologies. More than 99.99% of its  
pixels are effective. However, a minute number of pixels are missing or constantly lit.  
• Do not install the Plasmavision where there will be interference between it and other AV equipment. (If interference from  
electromagnetic waves causes jumbled images, noise or malfunctioning of the infrared remote control, change the installation  
location.)  
• When the display is installed vertically, only still images appears.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREVENTING EQUIPMENT FROM FALLING  
To prevent accidents and to ensure safety during disasters such as earthquakes, take precautions to ensure  
that the equipment cannot topple over.  
ATTACHING TO WALL OR COLUMN  
• Remove the display cover from both sides. Then, for both left and right sides, use screw A (10 mm) to attach  
bracket A to the screw hole (highest of the five holes on the side).  
• For both left and right sides, use screw B (20 mm) to attach bracket B to the wall. Then tie brackets A and B with  
a strong rope so that the display panel does not topple over.  
• This arrangement is stable when the rope is horizontal or pulled downward.  
How to remove display cover  
Push,  
then pull  
the cover  
with the  
fingers.  
Strong rope (not supplied)  
Screw B (20 mm)  
Display cover  
Screw A (10 mm)  
Display cover  
Bracket A  
Bracket B  
Display  
ATTACHING TO DESKTOP STAND  
• Fasten the screws supplied with the desktop stand into their holes at the rear of the desktop stand. (2 holes)  
• For details, refer to P-42TT01 User‘s Manual for the desktop stand.  
Two  
places  
Screw B (20 mm)  
The screws are supplied with the desktop stand.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAMES OF PARTS AND THEIR FUNCTIONS  
Front view  
Bottom view  
VOLUME  
WIDE  
(SET)  
PC CARD  
AUTO  
MENU  
(ADJUST)  
Power lamp  
Operation panel  
• Shows the power status, ON or OFF.  
• Lit (red)···Standby  
• POWER button: Switches the power on or off.  
• MODE button: Selects the input mode.  
• MENU button: For adjusting the video and audio to  
your taste.  
• Lit (green)···Power on  
• Blinking (red)···Internal abnormality. Be certain to  
unplug the power cord.  
• VOLUME (ADJUST)  
buttons: Normally used for adjusting the volume.  
During adjustments, these buttons are  
used for making adjustments from the  
menu screen.  
Remote control receiver  
• Receives the signals from the remote controller.  
• WIDE (SET) button: Normally used for selecting the  
desired wide screen.  
During adjustments, this is the  
(SET) button for setting the menu  
screen.  
• PC-CARD AUTO: When a PC card is being used,  
this button is used for switching  
between AUTO and  
MANUAL mode.  
Internal speakers  
• Output the audio connected to the audio input termi-  
nals.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rear view  
SYNC  
SW  
TTL  
AUDIO VIDEO S-VIDEO CONPONENT  
INPUT INPUT INPUT VIDEO INPUT  
RGB  
INPUT  
RS-232C  
R
L
ANALOG  
(75)  
RS-232C input terminal (RS-232C)  
Power switch  
• Connects to the computer RS-232C output terminal.  
• When pressed, power lamp lights red, and the  
power can be turned on or off by the remote control-  
ler. When this switch is pressed again, the power is  
cut and power lamp goes off.  
Audio input terminals (AUDIO INPUT)  
• Connects to the audio output terminal of a video deck  
or similar device.  
Power input terminal  
Sync switch (SYNC SW TTL/ANALOG (75 ))  
• For switching the RGB terminals' 13-pin horizontal  
sync and 14-pin vertical sync to terminate with 75 .  
When an analog synchronous signal is input at the  
RGB terminal, be sure that this switch is set to ANA-  
LOG (75 ). For connection to a personal computer,  
be sure it is set to TTL.  
• Firmly insert the accessory power cord as far as it will  
go into the power input terminal.  
• Firmly push the power cord plug as far as it will go  
into the power socket (100–240 VAC).  
Video input terminal (VIDEO INPUT)  
• Connects to the video output terminal of a video deck  
or video disc player.  
PC card slot  
• Where the PC card is loaded and unloaded. This can  
be locked with the accessory key.  
S video input terminal (S-VIDEO INPUT)  
• Connects to the S video output terminal of a video  
deck or video disc player.  
PC card access lamp  
• Lights while the PC card is being accessed.  
Component video input terminal (COMPONENT  
VIDEO INPUT)  
• Connects to the component video output terminal of  
DVD, and similar devices.  
RGB input terminal (RGB INPUT)  
• Connects to the computer monitor's (analog RGB)  
output terminal.  
Cables connecting the personal computer vary ac-  
cording to the type of machine, so consult your prod-  
uct dealer.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAMES OF PARTS AND THEIR FUNCTIONS  
A Remote controller  
• POWER button  
Switches the power on or off.  
P14  
Selects the input mode.  
• MENU button  
• WIDE button  
P23–30  
P14  
For selecting the desired wide  
screen  
• MODE button  
P14  
For adjusting the volume  
• SET button  
• VOLUME buttons  
P24–47  
For adjusting the picture and sound  
to your taste  
P24–47  
For setting the menu items and ad-  
justment items  
P19  
• RESET button  
P24–47  
When in PC CARD mode, returns  
to the start of the program created  
with the accessory program cre-  
ation software.  
• ADJUST button  
For making adjustments from the  
menu screen  
• AUTO button P18–19  
• RETURN button  
When in PC CARD mode, used to  
switch the program created with the  
accessory program creation soft-  
ware to AUTO or MANUAL mode.  
P19  
When in PC CARD mode, returns  
to the previous screen of the pro-  
gram created with the accessory  
program creation software.  
• NEXT button  
P19  
When in PC CARD mode, moves  
to the next screen of the program  
created with the accessory program  
creation software.  
The PC card's program creation software refers to the accessory PC Card Utility for Plasmavision.  
• For the adjustment menu, see the pages below. (  
)
Handy functions (on-screen display, speaker, white balance, DPMS, language) ····························  
VIDEO mode adjustment menu ·······································································································  
RGB mode adjustment menu···········································································································  
PC CARD mode adjustment menu ··································································································  
P24–27  
P28–35  
P36–43  
P44–47  
Points about usage  
• Do not subject the remote controller to strong mechanical shocks. Doing so can cause malfunction.  
• Do not get the remote controller wet or leave it in a hot location or near any heat source such as a heater. Doing so can cause  
malfunction or deformation.  
• Do not wipe the remote controller with volatile liquids such as benzine or paint thinner.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Handling the remote controller  
Loading the batteries  
Load two AA batteries, taking  
care that the + and – ends face  
the correct direction.  
Press on the cover and slide  
Close the cover until it clicks.  
3
2
1 in the direction of the arrow.  
Reception range of remote controller  
Upper  
20°  
20°  
Lower  
30° 30°  
Left  
Right  
5m (Front)  
Points about usage  
• Use the remote controller pointed in the direction of the remote control reception section, making sure there is no obstruction.  
• The remote controller may not operate correctly in a room using high-frequency fluorescent lights. If this happens, move away  
from those lights.  
• After it has been used for a long time, the remote controller batteries go flat. When this happens, replace them with new ones.  
• When replacing the batteries, make sure they are the same type as the originals.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATIONS  
PREPARATION  
Switch on the main power switch.  
Press the main POWER SWITCH at the rear. The power lamp lights (red).  
Pressing this switch again switches off the power.  
Press the POWER button.  
1
The power lamp changes from red  
to green.  
Example: VIDEO mode  
Select the VIDEO mode.  
2
Select the video mode with the  
MODE button.  
Pressing the MODE button moves  
the mode to the next item as  
below.  
Example: When RGB selected  
Mode display  
Adjusting the volume  
Use the VOLUME buttons to adjust the  
volume.  
This operation can also be  
done using the buttons on the  
Display’s operation panel.  
+ button····Raises the volume.  
– button····Lowers the volume.  
The current volume setting is memo-  
rized even when the power is  
switched off.  
Mode display  
• COMP.VIDEO stands for component video mode.  
• NO CARD is displayed when there is no PC card in the PC card slot during PC CARD mode.  
• When the speaker setting (see p.25) is OFF, SPEAKER OFF will be displayed if the VOLUME button is pressed.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING PC CARD  
PC CARDS THAT CAN BE USED  
Use a 5 V ATA card TYPE I-III that is a PCMCIA Rel. 2.0/JEIDA Ver. 4.0 or later, recommended by Fujitsu.  
A PC card is not supplied. A recommended version must be purchased separately.  
CAUTION  
• Do not use a card that operates on 3.3 V, as this can cause operation problems.  
• Certain PC cards (not recommended by Fujitsu) can damage the Plasmavision or the card.  
PC card  
This refers to the card standardized jointly by JEIDA and PCMCIA.  
ATA  
ATA is short for ATAttachment, which is the interface and protocol that the AT-compatible computer uses for access-  
ing the hard disk.  
JEIDA  
JEIDA is short for the Japan Electronic Industry Development Association. This organization has promulgated the  
standardization of specifications for IC memory cards, and has settled on common specifications.  
PCMCIA  
PCMCIA is short for the Personal Computer Memory Card International Association. This organization has devised  
joint memory card standardization based on the common specifications of JEIDA. Currently, this activity covers not  
only memory cards but all types of I/O cards. These cards are referred to as PC cards, and their standardization (PC  
Card Standard) has been completed.  
CAUTION  
Using the PC card  
• Do not bend the card or subject it to strong mechanical shocks.  
• Do not use or store the card where static electricity or electrical noise can occur easily.  
• Do not use or store the card in hot, humid, dusty or corrosive environments.  
• Do not allow grime or foreign matter into the connectors.  
• Do not allow the card to place near open flames or to be thrown into a fire, as this is dangerous.  
• The card has a limited life. If it is used for a lengthy time, it may become impossible to record data on it.  
• Do not touch the PC card or card with wet hands.  
PC card and Data  
• The customer or a third party may use the card wrongly or expose the card to static electricity or electrical  
noise. The ensuing malfunctions or repairs may result in wiping out the data on the PC card or card. Keep  
in mind that Fujitsu cannot be responsible for losses incurred because the PC card has been damaged  
and recorded data wiped out.  
• Do not turn off the power while the PC card is being accessed. Doing so can destroy data on the card.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING PC CARD  
Rear  
PREPARATION  
To use your purchased PC card, first initialize your personal computer again  
(format compatible with MS-DOS (R)).  
This initialization need be done once only.  
Creating programs on the PC card is done using the  
1accessory program creation software.  
Refer to the PC cards operation manual for how to initialize the PC card  
and how to create and save programs on the PC card.  
Loading/unloading the PC card  
2
• Switch on the Plasmavision's power.  
If the power lamp is lit (red or green), press the power switch at the rear  
to turn off the power. Confirm that the power lamp is not lit.  
How to load and unload the  
PC card  
• Open the door to the PC card slot on the side of the Plasmavision.  
• When loading the PC card, insert the PC card into the PC card slot.  
Insert the PC card for creating or storing programs with the  
accessory program creation software.  
• Push the PC card right into the slot until the button on the side of the card slot  
pops up.  
• Confirm that the PC card is inserted completely, and close the door of the PC  
card slot.  
• Lock the door with the accessory key (to prevent theft of the PC card).  
CAUTION  
• Do not insert your finger or any other object into the PC card slot  
when loading or unloading the PC card.  
Open  
• Do not insert the PC card back to front. Also, do not insert the  
PC card at an angle or use excess force to push it in.  
• When loading or unloading the PC card, be sure that the power  
switch of the Plasmavision is off.  
Front side  
Arrow indicating  
loading direction  
Insert PC card.  
Do not insert it back to front.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When taking PC card out  
• Press the button on the side of the PC card slot and take the PC card out.  
• Close the door of the PC card slot.  
CAUTION  
• Do not turn off the power while the PC card is being accessed.  
Doing so can destroy data on the card.  
The access lamp lights while the PC card is being accessed.  
Take PC card out  
Turn on the main power switch.  
3
Press the main power switch to turn on the power. The power lamp lights  
(red).  
Press POWER on the remote controller. The power lamp changes from  
red to green.  
Select PC CARD mode.  
4
With the MODE button, select  
PC CARD mode and execute the  
program. For details, see pages  
18 and 19.  
Example: PC CARD mode display  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING PC CARD  
AUTOMATICALLY EXECUTING PROGRAMS CRE-  
ATED WITH THE ACCESSORY PROGRAM CREATION  
SOFTWARE IN AUTO MODE  
Select PC CARD mode.  
1
With the MODE button, select PC  
CARD mode.  
Example: PC CARD still picture display  
Press the AUTO button.  
2
The current viewing mode is  
displayed.  
Example: Display of current status  
(MANUAL mode)  
Select AUTO mode using  
3the AUTO button.  
Pressing the button changes the  
mode as below.  
This operation can also be done  
using the buttons on the Display’s  
operation panel.  
AUTO  
MANUAL  
If AUTO mode is selected, the  
program that has been created  
will execute automatically as  
below.  
Example: When AUTO mode is selected  
AUTO  
When AUTO  
mode selected  
First page  
Second page  
Last page  
To quit AUTO mode  
Press the AUTO button to change to MANUAL mode.  
The MODE button is used for changing to the desired mode.  
Points about usage  
• When the PC card is being executed in AUTO mode, the MENU button cannot be used. If it is pressed, the message INVALID  
OPERATION appears. When adjusting, do so after pressing the AUTO button to change to MANUAL mode.  
• The MENU button cannot be used if the video or RGB signals are included in the program in PC CARD mode.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STEP-BY-STEP EXECUTING OF PROGRAMS CREATED WITH THE ACCESSORY  
PROGRAM CREATION SOFTWARE  
Select PC CARD mode.  
1
With the MODE button, select PC CARD mode.  
Example: PC CARD still picture display  
Press the AUTO button.  
2
The current viewing mode is displayed.  
With the AUTO button, select MANUAL mode.  
Pressing the button changes the mode as below.  
AUTO  
MANUAL  
Example: When MANUAL mode is selected  
Display the next PC card screen.  
3
Pressing the NEXT button on the remote controller changes the screen as  
below.  
Fifth screen  
Sixth screen  
Seventh screen  
Returning to the previous PC card screen  
Pressing the RETURN button changes the screen to the previous one.  
Seventh screen  
Sixth screen  
Fifth screen  
Returning to the first PC card screen  
Pressing the RESET button returns the display to the first screen.  
Seventh screen  
First screen  
Points about usage  
When the message NO CARD is displayed  
• There is no PC card in the PC card slot. Check whether a PC card is inserted in the PC card slot, referring to page 16, "Using PC  
CARD".  
When the message INVALID CARD is displayed  
• The inserted PC card is the wrong type. Use a recommended PC card.  
When the message DATA READING ERROR is displayed  
• The data (still picture data or program) written to the PC card is unreadable. Take the PC card out of the PC card slot, referring to  
page 16, "Using PC CARD".  
Be sure that the power switch of the Plasmavision is off before taking out the PC card.  
Check the data written to the PC card with the accessory program creation software. For details, refer to the PC card's operation  
manual.  
• In MANUAL mode, the color of the still picture can cause the picture to become jumbled when it is switched.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIEWING WIDE SCREEN (VIDEO MODE)  
SWITCHING THE WIDE SCREEN AUTOMATICALLY  
Press the WIDE button.  
1
The current viewing mode is  
displayed.  
Example: NORMAL mode  
With the WIDE button,  
2
select AUTO mode.  
Pressing the WIDE button moves  
the mode to the next item as  
below.  
Example: When AUTO is selected,  
When AUTO is selected, the wide  
screen is automatically selected  
according to the contents of the  
video.  
This operation can also be done  
using the buttons on the Display’s  
operation panel.  
AUTO mode cannot be selected in COMPONENT VIDEO mode.  
In AUTO mode, the contents of the video software are detected and the display  
switches to the optimum wide screen as follows:  
• WIDE 1  
The appropriate wide screen for ordi-  
nary video (4:3) software.  
When AUTO mode is selected  
With certain software, the  
Plasmavision may not operate cor-  
rectly in AUTO mode. If so, use the  
WIDE button to switch to the most  
appropriate screen size.  
Ordinary video (4:3 video)  
Vertically wide video  
WIDE 1  
WIDE 2  
• WIDE 2  
Appropriate for 16:9 video compressed  
to horizontally wide 4:3 video.  
Examples:  
• Some game software will invoke  
the zoom screen (where the top  
and bottom of the screen are miss-  
ing).  
• ZOOM 1  
Appropriate for horizontally wide video  
software; a normal picture appears  
with the top, bottom, left, and right  
enlarged.  
• For some 4:3 video software, in  
scenes where the top and bottom  
are extremely dark, the display  
may switch to the zoom screen.  
• For video software that switches  
to the zoom screen automatically,  
the display may take a few mo-  
ments to switch to the zoom screen  
for the first dark scene.  
ZOOM 1  
Horizontally wide video  
• ZOOM 2  
For horizontally wide video software  
with subtitles, the display is automati-  
cally adjusted to compress the subtitle  
section so that it is not cut out.  
a
coo coo flew over the one’s next  
a
coo coo flew over the one’s next  
Horizontally wide video  
with subtitles  
NORMAL mode  
ZOOM 2  
Wide screen  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING THE DESIRED WIDE SCREEN SIZE  
Press the WIDE button.  
1
The current viewing mode is displayed.  
Use the WIDE button to select the desired screen size.  
2
Pressing the WIDE button moves the mode to the next item as below.  
Select the wide screen size to suit the program.  
Example: When WIDE 1 is selected  
AUTO mode cannot be selected in COMPONENT VIDEO mode.  
SCREENS ASPECT RATIO  
The aspect ratios (horizontal to vertical size ratios) for broadcasts and  
videos are as follows:  
4
16  
1.85  
2.35  
3
9
1
1
• Vistavision size software  
• Vistavision size software  
• Cinemavision size software  
• VHF/UHF broadcasts  
* Even when ZOOM 1 or ZOOM 2 is set for Vistavision size or Cinemavision size software that is predominantly  
used for movie software, dark areas may remain at the top and bottom.  
Points about usage  
• The Plasmavision can be switched to a variety of screen modes. When the selected mode has a different picture aspect ratio  
from the media to be viewed, the picture will appear different from the original. Keep this in mind when selecting the screen  
mode.  
• Note that use of a wide select function to change the screen size or aspect ratio during commercial use or for public viewing  
in a coffee shop, hotel, or the like, may infringe on copyrights protected by the copyright law.  
To respect the intent of the creators of the original video, use NORMAL mode.  
• If the wide select function is used to display non-wide screen conventional (normal) 4:3 video software over the entire screen,  
the picture will be deformed with part of the edge not visible.  
• In PC CARD mode, the wide screen is invoked.  
• VIDEO mode is the generic term for VIDEO mode, S-VIDEO mode, and COMPONENT VIDEO mode.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIEWING WIDE SCREEN (RGB MODE)  
SETTING THE DESIRED WIDE SCREEN SIZE  
Press the WIDE button.  
1
The current viewing mode is  
displayed.  
Example: NORMAL  
Press the WIDE button to  
2
select the desired screen  
size.  
Pressing the WIDE button moves  
the mode to the next item as  
below.  
NORMAL  
WIDE  
Example: When WIDE is selected  
This operation can also be done  
using the buttons on the Display’s  
operation panel.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WIDE SCREEN MODES (RGB MODE)  
• When the screen is vertically wide  
WIDE  
Vertically wide video  
Points about usage  
• Note that use of a wide select function to change the screen size or aspect ratio during commercial use or for public viewing  
in a coffee shop, hotel, or the like, may infringe on copyrights protected by the copyright law.  
To respect the intent of the creators of the original video, use NORMAL mode.  
• In PC CARD mode, the wide screen is invoked.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HANDY FUNCTIONS  
ON-SCREEN DISPLAY SETTING  
Select COMMON  
1
SETTINGS from the  
VIDEO MENU screen.  
1) Press the MENU button.  
2) With the ADJUST button,  
select COMMON SETTINGS.  
3) Set by pressing the SET  
button.  
Example: When COMMON SETTINGS is  
selected  
COMMON SETTINGS can be  
set in the same way from any  
mode menu.  
Select the adjustment  
item.  
2
3
With the SET button, select  
DISPLAY.  
Pressing the SET button moves  
the selection to the next item as  
below.  
This operation can also be done  
using the buttons on the Display’s  
operation panel.  
Example: When DISPLAY is selected  
Set the desired setting.  
Pressing the ADJUST button  
moves the selection to the next  
item as below.  
ON···· The mode is displayed on  
the screen for a few sec-  
onds when the power is  
first switched on and when  
the mode is switched.  
Example: When ON is selected  
OFF···The mode is not displayed.  
To complete adjustments  
Press the MENU button to return to the VIDEO MENU.  
Pressing the MENU button returns the display to the previous screen and closes  
the adjustment screen.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTERNAL SPEAKER SETTING  
Select COMMON SETTINGS from the VIDEO MENU screen.  
1
1) Press the MENU button.  
2) With the ADJUST button, select COMMON SETTINGS.  
3) Set by pressing the SET button.  
COMMON SETTINGS can be set in the same way from any mode menu.  
Example: When COMMON SETTINGS is  
selected  
Select the adjustment item.  
2
With the SET button, select SPEAKER.  
Pressing the SET button moves the selection to the next item as below.  
Example: When SPEAKER is selected  
Set the internal speakers.  
3
Select with the ADJUST button.  
Pressing the ADJUST button moves the selection to the next item as be-  
low.  
Example: When ON is selected  
To complete adjustments  
Press the MENU button to return to the VIDEO MENU.  
Pressing the MENU button returns the display to the previous screen and closes  
the adjustment screen.  
Adjustment items  
• Pressing the SET button moves the selection to the next item.  
ON: When using the internal speakers, regardless of mode.  
RGB: When using the internal speakers in RGB mode only.  
VIDEO: When using the internal speakers in VIDEO mode only.  
S-VIDEO: When using the internal speakers in S-VIDEO mode only.  
COMP.VIDEO: When using the internal speakers in COMPONENT VIDEO mode only.  
PC CARD: When using the internal speakers in PC CARD mode only.  
OFF: When not using the internal speakers.  
If there is no operation for 60 seconds, the screen display goes off.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HANDY FUNCTIONS  
WHITE BALANCE SETTING  
Select COMMON  
1
SETTINGS from the  
VIDEO MENU screen.  
1) Press the MENU button.  
2) With the ADJUST button,  
select COMMON SETTINGS.  
3) Set by pressing the SET  
button.  
Example: When COMMON SETTINGS is  
selected  
COMMON SETTINGS can be  
set in the same way from any  
mode menu.  
Select the adjustment  
item.  
2
3
With the SET button, select  
WHITE BALANCE.  
Pressing the SET button moves  
the selection to the next item as  
below.  
This operation can also be done  
using the buttons on the Display’s  
operation panel.  
Example: When WHITE BALANCE is selected  
Adjust to the desired  
white balance.  
With the ADJUST button, select  
the desired WHITE BALANCE.  
Select the tint with the ADJUST  
button.  
Pressing the ADJUST button  
moves the selection to the next  
item as below.  
Example: When 0 is selected  
To complete adjustments  
Press the MENU button to return to the VIDEO MENU.  
Pressing the MENU button returns the display to the previous screen and closes  
the adjustment screen.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DPMS AND DISPLAY LANGUAGE SETTING  
DPMS SETTING  
The time until the power conservation function operates can  
be set.  
Select with the ADJUST button.  
Pressing the ADJUST button moves the selection to the next item as below.  
Example: When OFF is selected  
LANGUAGE (DISPLAY LANGUAGE) SETTING  
The language for the display can be set.  
Select with the ADJUST button.  
Pressing the ADJUST button moves the selection to the next item as below.  
Example: When ENGLISH-A is selected  
Note: The setting title and guidance display also change.  
Setting titles  
Adjustment items  
• An adjustment item is selected each time the SET button is pressed.  
DPMS  
DPMS stands for Display Power Management Signaling. It is a function that automatically reduces the amount of power  
consumed by the monitor.  
When the power is on, if no signal is input within the set time, the power management function is triggered, the monitor screen  
is automatically switched off, and the monitor goes on standby.  
This signal wait time can be set from 1 to 5 minutes in units of one minute. Also, the power management function can be  
switched off. (The factory setting is OFF.)  
DPMS does not work in PC CARD mode.  
This display has a five-language on screen menu.  
ENGLISH-A --------------- American English  
ENGLISH-B --------------- British English  
DEUTSCH ----------------- German  
FRANÇAIS ---------------- French  
ESPAÑOL ----------------- Spanish  
If there is no operation for 60 seconds, the screen display goes off.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIDEO ADJUSTMENTS (VIDEO MODE)  
EXAMPLE: ADJUSTING THE BRIGHTNESS  
Select PICTURE from the  
1
VIDEO MENU screen.  
1) Press the MENU button.  
2) With the ADJUST button,  
select PICTURE.  
3) Set by pressing the SET  
button.  
Example: When PICTURE is selected  
Select the adjustment  
item.  
2
With the SET button, select  
BRIGHTNESS.  
Pressing the SET button moves  
the selection to the next item as  
below.  
Example: When BRIGHTNESS is selected  
This operation can also be done  
using the buttons on the Display’s  
operation panel.  
Adjust to the desired  
picture.  
3
button····Makes the picture  
brighter.  
button····Makes the picture  
darker.  
To adjust multiple items, repeat  
Steps 2 and 3.  
Example: When the  
button is pressed  
To complete adjustments  
Press the MENU button to return to the VIDEO MENU.  
Pressing the MENU button returns the display to the previous screen and closes  
the adjustment screen.  
The adjustments are saved for each video mode (VIDEO mode, S-VIDEO  
mode, and COMPONENT VIDEO mode).  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIDEO ADJUSTMENT ITEMS  
BRIGHTNESS  
Screen brightness can be adjusted.  
button: Makes the picture brighter.  
button: Makes the picture darker.  
CONTRAST  
Screen contrast (difference between dark and light) can be adjusted.  
button: Makes the contrast stronger.  
button: Makes the contrast weaker.  
COLOR (color saturation)  
Color saturation can be adjusted.  
button: Makes the color more saturated.  
button: Makes the color less saturated.  
TINT  
Color tint can be adjusted.  
button: Makes the tint greener.  
button: Makes the tint more purple.  
SHARPNESS  
Picture sharpness can be adjusted.  
button: Makes a sharper picture.  
button: Makes a softer picture.  
Adjustment items  
• Pressing the SET button moves selection to the next item.  
• VIDEO mode is the generic term for VIDEO mode, S-VIDEO mode, and COMPONENT VIDEO mode.  
• The adjustments are saved for each video mode.  
• TINT functions only in NTSC mode.  
If there is no operation for 60 seconds, the screen display goes off.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SCREEN ADJUSTMENT (VIDEO MODE)  
EXAMPLE: ADJUSTING THE SCREEN VERTICAL  
POSITION  
Select POSITION/SIZE  
1
from the VIDEO MENU  
screen.  
1) Press the MENU button.  
2) With the ADJUST button,  
select POSITION/SIZE.  
3) Set by pressing the SET  
button.  
Example: When POSITION/SIZE is  
selected  
Select the adjustment  
item.  
2
With the SET button, select  
VERTICAL POSITION.  
Pressing the SET button moves  
the selection to the next item as  
below.  
Example: When VERTICAL POSITION is  
selected  
This operation can also be done  
using the buttons on the  
Plasmavision's operation panel.  
Adjust with the ADJUST  
button.  
3
button····Moves the screen up.  
button····Moves the screen  
down.  
For the adjustment range, see the  
opposite page.  
To adjust multiple items, repeat  
Example: When the  
button is pressed  
steps 2 and 3.  
To complete adjustments  
Press the MENU button to return to the VIDEO MENU.  
Pressing the MENU button returns the display to the previous screen and closes  
the adjustment screen.  
The adjustments are saved for each video mode (VIDEO mode, S-VIDEO  
mode, and COMPONENT VIDEO mode).  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTMENT ITEM LIST (ADJUSTMENT CRITERIA)  
VERTICAL POSITION  
When too low···Adjust with the button.  
When too high···Adjust with the button.  
HEIGHT  
When too small···Adjust with the button.  
When too large···Adjust with the button.  
HORIZONTAL POSITION  
When too far left:···Adjust with the button.  
When too far right:···Adjust with the button.  
HORIZONTAL WIDTH  
When too small···Adjust with the button.  
When too large···Adjust with the button.  
Adjustment items  
• Pressing the SET button moves selection to the next item.  
VERTICAL POSITION  
• For VIDEO and S-VIDEO modes: ZOOM: –15 through +15 Other: –7 through +7  
COMPONENT VIDEO mode: –90 through +90  
HEIGHT  
• For VIDEO and S-VIDEO modes: –7 through +7 COMPONENT VIDEO mode: –70 through +70  
HORIZONTAL POSITION  
• For VIDEO and S-VIDEO modes: –31 through +31 COMPONENT VIDEO mode: –90 through +90  
HORIZONTAL WIDTH  
• For all modes: –7 through +7  
• VIDEO mode is the generic term for VIDEO mode, S-VIDEO mode, and COMPONENT VIDEO mode.  
• The adjustments are saved for each video mode.  
If there is no operation for 60 seconds, the screen display goes off.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INPUT SOURCE ADJUSTMENTS (VIDEO MODE)  
EXAMPLE: SETTING COMPONENT VIDEO  
Setting must be done when connecting a color difference signal to the  
COMPONENT VIDEO terminal.  
Select SOURCE from the  
1
VIDEO MENU screen.  
1) In COMPONENT VIDEO  
mode, press the MENU  
button.  
2) With the ADJUST button,  
select SOURCE.  
3) Set by pressing the SET  
button.  
Example: When SOURCE is selected  
This setting can be done in  
COMPONENT VIDEO mode  
only.  
Select the adjustment  
item.  
2
With the SET button, select  
COMPONENT VIDEO.  
Pressing the SET button moves  
the selection to the next item as  
below.  
COMPONENT VIDE  
CLAMP PULSE  
This operation can also be done  
using the buttons on the Display’s  
operation panel.  
Example: When COMPONENT VIDEO is  
selected  
COMPONENT VIDEO and  
CLAMP PULSE are set for  
COMPONENT VIDEO mode.  
VIDEO SYSTEM can be set for  
VIDEO mode and S-VIDEO  
mode.  
Set the connected  
equipment.  
3
Select with the ADJUST button.  
MODE 1: Use this mode for nor-  
mal usage such as DVD,  
BETACAM or other standard  
component video signals.  
MODE 2: Use this mode only for  
MUSE signal (Hi-Vision – Japanese  
high definition video signal).  
Example: When MODE 1 is selected  
To complete adjustments  
Press the MENU button to return to the VIDEO MENU.  
Pressing the MENU button returns the display to the previous screen and closes  
the adjustment screen.  
COMPONENT VIDEO and CLAMP PULSE can be set in COMPONENT  
VIDEO mode only. VIDEO SYSTEM can be set in VIDEO mode and S-VIDEO  
mode only.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING VIDEO SYSTEM AND CLAMP PULSE  
VIDEO SYSTEM  
VIDEO SYSTEM can be set when the signal is connected to the VIDEO or  
S-VIDEO input terminal.  
Set by adjusting to the connected signal.  
In VIDEO or S-VIDEO mode, press the MENU button to select SOURCE.  
Select with the ADJUST button.  
Pressing the ADJUST button moves the selection to the next item as  
below.  
When N-PAL and M-PAL signals are input, signals cannot be received  
successfully in AUTO mode. Select either N-PAL or M-PAL.  
This setting can be done in VIDEO mode and S-VIDEO mode only. The  
VIDEO SYSTEM setting is saved for VIDEO mode and S-VIDEO mode.  
CLAMP PULSE  
When connecting a color difference signal to the COMPONENT VIDEO  
input terminal, CLAMP PULSE must be set.  
This setting switches the phase of the clamp pulse.  
The ADJUST button can be adjusted in the range from 0 through 4.  
Select so the optimum picture is attained.  
This setting can be done in COMPONENT VIDEO mode only.  
Adjustment items  
• Pressing the SET button moves selection to the next item.  
• Set CLAMP PULSE as follows, depending on the connected device signal.  
1 : MUSE signal (Hi-Vision – Japanese high difinition video signal).  
4 : NTSC, PAL, SECAM  
When connecting other devices than the ones described above, adjust CLAMP PULSE so that the optimum image is ob-  
tained.  
If there is no operation for 60 seconds, the screen display goes off.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER ADJUSTMENTS (VIDEO MODE)  
EXAMPLE: MAKING THE GAMMA SETTING  
Select OTHERS from the  
1
2
VIDEO MENU screen.  
1) Press the MENU button.  
2) With the ADJUST button,  
select OTHERS.  
3) Set by pressing the SET  
buttons  
Example: When OTHERS is selected  
Select the adjustment  
item.  
With the SET button, select  
GAMMA.  
Pressing the SET button moves  
the selection to the next item as  
below.  
GAMMA  
GRADATION  
Example: When GAMMA is selected  
This operation can also be done  
using the buttons on the Display’s  
operation panel.  
Select the desired picture.  
3
Select with the ADJUST button.  
MOTION  
Carries out automatic correction  
so that the video is optimum for  
viewing moving images.  
STILL  
Carries out automatic correction  
so that the video is optimum for  
viewing still images.  
Example: When MOTION is selected  
To complete adjustments  
Press the MENU button to return to VIDEO MENU.  
Pressing the MENU button returns the display to the previous screen and closes  
the adjustment screen.  
The adjustments are saved for each video mode (VIDEO mode, S-VIDEO  
mode, and COMPONENT VIDEO mode).  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER ADJUSTMENT ITEMS  
GRADATION  
Gradation display can be selected to suit still or moving images.  
MODE1···· Carries out automatic correction so that the video is optimum  
for viewing moving images.  
MODE2····Carries out automatic correction so that the video is optimum  
for viewing still images.  
Adjustment items  
• Pressing the SET button moves selection to the next item.  
• VIDEO mode is the generic term for VIDEO mode, S-VIDEO mode, and COMPONENT VIDEO mode.  
• The adjustments are saved for each video mode.  
If there is no operation for 60 seconds, the screen display goes off.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIDEO ADJUSTMENTS (RGB MODE)  
EXAMPLE: ADJUSTING THE CONTRAST  
Select PICTURE from the  
1
2
RGB MENU screen.  
1) Press the MENU button.  
2) With the ADJUST button,  
select PICTURE.  
3) Set by pressing the SET  
button.  
Example: When PICTURE is selected  
Select the adjustment  
item.  
With the SET button, select  
CONTRAST.  
Pressing the SET button moves  
the selection to the next item as  
below.  
BRIGHTNESS  
CONTRAST  
Example: When CONTRAST is selected  
This operation can also be done  
using the buttons on the Display’s  
operation panel.  
Adjust to the desired  
picture.  
3
button····Makes the contrast  
stronger.  
button····Makes the contrast  
weaker.  
To adjust another item, repeat  
steps 2 and 3.  
Example: When the  
button is pressed  
To complete adjustments  
Press the MENU button to return to the RGB MENU.  
Pressing the MENU button returns the display to the previous screen and closes  
the adjustment screen .  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIDEO ADJUSTMENT ITEMS  
BRIGHTNESS  
Screen brightness can be adjusted.  
button: Makes the picture brighter.  
button: Makes the picture darker.  
CONTRAST  
Screen contrast (difference between dark and light) can be adjusted.  
button: Makes the contrast stronger.  
button: Makes the contrast weaker.  
Adjustment items  
• Pressing the SET button moves the selection to the next item.  
If there is no operation for 60 seconds, the screen display goes off.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SCREEN ADJUSTMENT (RGB MODE)  
EXAMPLE: ADJUSTING THE HEIGHT OF  
THE SCREEN  
Select POSITION/SIZE  
1
2
3
from the RGB MENU  
screen.  
1) Press the MENU button.  
2) With the ADJUST button,  
select POSITION/SIZE.  
3) Set by pressing the SET  
button.  
Example: When POSITION/SIZE is  
selected  
Select the adjustment  
item.  
With the SET button, select  
HEIGHT.  
Pressing the SET button moves  
the selection to the next item as  
below.  
This operation can also be done  
using the buttons on the Display’s  
operation panel.  
Example: When HEIGHT is selected  
Adjust with the ADJUST  
button.  
button····Enlarges the screen.  
button····Reduces the screen.  
The adjustment range is from  
–150 through +150.  
To adjust multiple items, repeat  
Example: When the  
button is pressed  
steps 2 and 3.  
To complete adjustments  
Press the MENU button to return to the RGB MENU.  
Pressing the MENU button returns the display to the previous screen and closes  
the adjustment screen.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTMENT ITEM LIST (ADJUSTMENT CRITERIA)  
VERTICAL POSITION  
When too low····Adjust with the button.  
When too high····Adjust with the button.  
The adjustment range is from –250 through +250.  
HEIGHT  
When too small····Adjust with the button.  
When too large····Adjust with the button.  
The adjustment range is from –150 through +150.  
HORIZONTAL POSITION  
When too far left····Adjust with the button.  
When too far right····Adjust with the button.  
The adjustment range is from –250 through +250.  
HORIZONTAL WIDTH  
When too small····Adjust with the button.  
When too large····Adjust with the button.  
The adjustment range is from –150 through +150.  
VERTICAL LINE  
The number of vertical lines on the screen can be set.  
With the ADJUST button, select the number of vertical lines.  
Pressing the ADJUST button moves the selection to the next item as be-  
low.  
Adjustment items  
• Pressing the SET button moves selection to the next item.  
• After adjustment, the screen may be jumbled. If so, return the setting to the original adjustment value.  
If there is no operation for 60 seconds, the screen display goes off.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INPUT SOURCE ADJUSTMENTS (RGB MODE)  
The Macintosh mode and the clamp pulse mode can be set for the input source, and the input signal can be  
confirmed.  
EXAMPLE: SETTING MACINTOSH MODE  
The Apple Macintosh has two dot clocks. If the display is partly cut or the video  
and the dot clock do not match, set the dot clock as follows:  
Select SOURCE from the  
1
2
RGB MENU screen.  
1) Press the MENU button.  
2) With the ADJUST button,  
select SOURCE.  
3) Set by pressing the SET  
button.  
Example: When SOURCE is selected  
Select the adjustment  
item.  
With the SET button, select MAC  
MODE.  
Pressing the SET button moves  
the selection to the next item as  
below.  
Example: When MAC MODE is  
selected  
This operation can also be done  
using the buttons on the Display’s  
operation panel.  
Select the appropriate  
mode for the dot clock.  
3
Select with the ADJUST button.  
Pressing the ADJUST button  
moves the selection to the next  
item as below.  
MODE 1  
MODE 2  
fH  
fV  
Example: When MODE1 is selected  
MODE 1····35 kHz  
66.67 Hz  
MODE 2····34.975 kHz 66.61 Hz  
To adjust multiple items, repeat  
steps 2 and 3.  
To complete adjustments  
Press the MENU button to return to the RGB MENU.  
Pressing the MENU button returns the display to the previous screen and closes  
the adjustment screen.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER ADJUSTMENTS AND CHECK ITEMS  
CLAMP PULSE  
CLAMP PULSE must be set when the signal is connected to the RGB  
input terminal.  
This setting switches the phase of the clamp pulse.  
The ADJUST button can be adjusted in the range from 0 through 4.  
Select so tha optimum picture is attained.  
SIGNAL INFORMATION  
The sync signal information input from the RGB input terminal can be  
checked.  
MODE: Fixed mode No. (Mode Nos. are set out on page 48.)  
TYPE: Component separate or sync on green.  
For details, see "Personal Computers that Can Be Connected" on page  
48.  
When no signal is detected, NO SIGNAL is displayed.  
Adjustment items  
• Pressing the SET button moves selection to the next item.  
• Set CLAMP PULSE as follows, depending on the connected device signal.  
0 : Normal  
1 : MUSE signal (Hi-Vision – Japanese high definition video signal).  
2 : Other  
3 : MAC  
4 : NTSC, PAL, SECAM  
Points about usage  
Depending on the type of device inputting the signal, SYNC ON GREEN and other sync signals may be input simultaneously.  
This can cause the background of the screen to be too bright or too green. If this occurs, set the clamp pulse to 3.  
If there is no operation for 60 seconds, the screen display goes off.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER ADJUSTMENTS (RGB MODE)  
EXAMPLE: SETTING THE GRADATION  
Select OTHERS from the  
1
RGB MENU screen.  
1) Press the MENU button.  
2) With the ADJUST button,  
select OTHERS.  
3) Set by pressing the SET  
button.  
Example: When OTHERS is selected  
Select the adjustment  
item.  
2
With the SET button, select  
GRADATION.  
Pressing the SET button moves  
the selection to the next item as  
below.  
Example: When GRADATION is selected  
This operation can also be done  
using the buttons on the Display’s  
operation panel.  
Adjust to the desired  
picture.  
3
Select with the ADJUST button.  
MODE1: Carries out automatic  
correction so that the  
video is optimum for  
viewing moving images.  
MODE2: Carries out automatic  
correction so that the  
Example: When the MODE 2 is selected  
video is optimum for  
viewing still images.  
To adjust multiple items, repeat  
steps 2 and 3.  
To complete adjustments  
Press the MENU button to return to the RGB MENU.  
Pressing the MENU button returns the display to the previous screen and closes  
the adjustment screen.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER ADJUSTMENT ITEMS (ADJUSTMENT CRITERIA)  
GAMMA  
Dynamic GAMMA correction can be set.  
MOTION: Set for viewing moving images.  
STILL:  
Set for viewing still images.  
GRADATION  
Gradation can be set.  
MODE 1: Set for viewing moving images.  
MODE 2: Set for viewing still images.  
DOT CLOCK  
Depending on the clock frequency of the personal computer, the screen  
may become blurred. If so, adjust.  
The ADJUST button can be adjusted in the range from –300 through +300.  
CLOCK PHASE  
Depending on the clock phase of the personal computer, the screen may  
become blurred. If so, adjust.  
The ADJUST button can be adjusted in the range from 0 through 15.  
SYNC PHASE  
The screen may tremble vertically. If so, use the ADJUST button to adjust  
the screen within the range of –2 and +1.  
Adjustment items  
• Pressing the SET button moves selection to the next item.  
• When GRADATION is automatically recognized in SVGA mode, it cannot be set.  
• Adjust DOT CLOCK and CLOCK PHASE after invoking normal mode with the WIDE button.  
• When SVGA mode has been automatically recognized, the screen may be jumbled depending on what equipment is con-  
nected. If so, adjust DOT CLOCK.  
If there is no operation for 60 seconds, the screen display goes off.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIDEO ADJUSTMENTS (PC CARD MODE)  
EXAMPLE: ADJUSTING THE CONTRAST  
Select PICTURE from the  
1
2
PC CARD MENU screen.  
1) Press the MENU button.  
2) With the ADJUST button,  
select PICTURE.  
3) Set by pressing the SET  
button.  
Example: When PICTURE is selected  
Select the adjustment  
item.  
With the SET button, select  
CONTRAST.  
Pressing the SET button moves  
the selection to the next item as  
below.  
BRIGHTNESS  
CONTRAST  
Example: When CONTRAST is selected  
This operation can also be done  
using the buttons on the Display’s  
operation panel.  
Adjust to the desired  
picture.  
3
button··· Makes the contrast  
stronger.  
button···Makes the contrast  
weaker.  
To adjust another items, repeat  
steps 2 and 3.  
Example: When the  
button is pressed  
To complete adjustments  
Press the MENU button to return to the PC CARD MENU.  
Pressing the MENU button returns the display to the previous screen and closes  
the adjustment screen.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIDEO ADJUSTMENT ITEMS  
BRIGHTNESS  
Screen brightness can be adjusted.  
button: Makes the picture brighter.  
button: Makes the picture darker.  
CONTRAST  
Screen contrast (difference between dark and light) can be adjusted.  
button: Makes the contrast stronger.  
button: Makes the contrast weaker.  
Adjustment items  
• Pressing the SET button moves selection to the next item.  
• The MENU button is not effective during AUTO mode of PC CARD mode. If the MENU button is pressed, the message  
INVALID OPERATION will be displayed.  
• The MENU button cannot be used if the video or RGB signals are included in the program in PC CARD mode.  
If there is no operation for 60 seconds, the screen display goes off.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER ADJUSTMENTS (PC CARD MODE)  
EXAMPLE: SETTING THE GRADATION  
Select OTHERS from the  
1
PC CARD MENU screen.  
1) Press the MENU button.  
2) With the ADJUST button,  
select OTHERS.  
3) Set by pressing the SET  
button.  
Example: When OTHERS is selected  
Select the adjustment  
item.  
2
With the SET button, select  
GRADATION.  
Pressing the SET button moves  
the selection to the next item as  
below.  
Example: When GRADATION is selected  
This operation can also be done  
using the buttons on the Display’s  
operation panel.  
Adjust to the desired  
picture.  
3
Select with the ADJUST button.  
MODE1: Carries out automatic  
correction so that the  
video is optimum for  
viewing moving images.  
MODE2: Carries out automatic  
correction so that the  
Example: When the MODE 2 is selected  
video is optimum for  
viewing still images.  
To adjust multiple items, repeat  
steps 2 and 3.  
To complete adjustments  
Press the MENU button to return to the PC CARD MENU.  
Pressing the MENU button returns the display to the previous screen and closes  
the adjustment screen.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTMENT ITEM LIST (ADJUSTMENT CRITERIA)  
GAMMA  
Dynamic GAMMA correction can be set.  
MOTION: Set for viewing moving images.  
STILL:  
Set for viewing still images.  
GRADATION  
Gradation can be set.  
MODE 1: Set for viewing moving images.  
MODE 2: Set for viewing still images.  
HORIZONTAL POSITION  
The horizontal start position can be adjusted.  
The adjustment range is from –5 through +5.  
CLOCK PHASE  
Depending on the clock phase of the personal computer, the screen may  
become blurred. If so, adjust.  
The ADJUST button can be adjusted in the range from 0 through 15.  
Adjustment items  
• Pressing the SET button moves selection to the next item.  
• The MENU button is not effective during AUTO mode of PC CARD mode. If the MENU button is pressed, the message  
INVALID OPERATION will be displayed.  
• The MENU button cannot be used if the video or RGB signals are included in the program in PC CARD mode.  
If there is no operation for 60 seconds, the screen display goes off.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PERSONAL COMPUTERS THAT CAN BE CONNECTED  
The Plasmavision is set at the factory with adjustment values for 11 types of signals. (See the table below.) When any of  
these signals is input, it is automatically discriminated. For these signals, the desired screen can be adjusted according  
to the instructions on adjusting the screen.  
The Plasmavision can also store settings for five types of signals in addition to those set at the factory, as shown in the  
table below. Input the signals whose settings are to be stored into memory and adjust for the desired screen following the  
instructions on adjusting the screen. Release the adjustment button to automatically store the level into memory. After  
adjustment, when the same signals are input, they are displayed with the setting levels last stored into memory.  
Factory-set signals  
Mode  
number  
Display  
(dots × lines)  
Horizontal frequency  
(kHz)  
Vertical frequency  
(Hz)  
Supported signal  
Note1 When dedicated  
graphics board used  
1
852 × 480  
31.72  
59.97  
2
3
4
5
640 × 480  
640 × 480  
640 × 480  
720 × 400  
640 × 480  
640 × 480  
640 × 400  
640 × 400  
800 × 600  
640 × 480  
640 × 480  
31.47  
37.86  
37.50  
31.47  
34.97  
35.00  
24.83  
31.50  
35.16  
15.73  
15.63  
59.94  
72.81  
75.00  
70.09  
66.61  
66.67  
56.42  
70.15  
56.25  
59.94  
50.00  
VGA  
VGA 72 Hz  
VGA 75 Hz  
VGA 400 lines  
MAC 13RGB (1)  
MAC 13RGB (2)  
PC98 24kHz  
PC98 31kHz  
SVGA 56 Hz Note2  
60 fields  
6
7
8
9
10  
11  
12  
13  
14  
15  
16  
50 fields  
15.63 to 60.00  
50.00 to 75.00  
User settings  
Note 1: The dedicated graphics board is an optional product.  
2: The 800 x 600 mode is compressed display through compression interpolation. Also, the screen  
display is also compressed for display.  
Points about usage  
The company names and product names in this document are trademarks or registered trademarks of their respective com-  
panies.  
The mode numbers indicate the SIGNAL INFORMATION modes set for the RGB mode and input source.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPTIONAL PRODUCTS  
• Wall-mounting unit (horizontal)  
For 0° installation angle  
P-42WB01-B  
P-42WB02-B  
P-42WB03-B  
P-42WB04-B  
For 5° installation angle  
For 10° installation angle  
For 15° installation angle  
• Wall-mounting unit (vertical)  
• Ceiling-mounting unit  
For 0° installation angle  
P-42WB50-B  
P-42CT01-B  
Installation angle variable  
0–15°  
The pipe is not supplied with the ceiling-hanging unit,  
so consult your product dealer.  
• Desktop stand  
• Graphics board  
P-42TT01-H  
When a graphics board is used  
with a DOS/V personal computer,  
an 852 dot x 480 line wide screen  
can be displayed.  
P-42GA04  
• AV terminal unit  
This is a dedicated PDS4204E-H  
AV terminal unit. Before attaching,  
pull out the power plug.  
P-42TE01-B  
When installing an optional product, follow the directions in the optional product user's or installation manual.  
The colors of the Plasmavision and optional products are slightly different.  
WARNING  
• Request your product dealer to mount and install these products.  
If you do the mounting or moving work yourself, the equipment may fall or topple over, resulting in injuries,  
fire, or electrocution.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Model name  
PDS4204W-H/PDS4204E-H  
Screen size  
42 inches---92.0 cm (W) x 51.8 cm (H) x 105.6 cm (width across corners)  
Aspect ratio  
16:9  
Weight  
38.5 kg  
External dimensions  
Power supply  
103.5 (W) x 64.0 (H) x 15.0 (D) cm  
100–240 VAC, 50/60 Hz  
3.5A  
Power consumption  
Screen dimensions  
Display pixel count  
92.0 (W) x 51.8 (H) cm  
852 (horizontal) x 480 (vertical)  
Display modes  
• For video, S-video, input: NORMAL, AUTO, WIDE 1, WIDE 2,  
ZOOM 1, ZOOM 2  
• For component video input: NORMAL, WIDE 1, WIDE 2, ZOOM 1, ZOOM 2  
• For RGB input: NORMAL, WIDE  
• For PC card input: WIDE  
Display color count  
Audio output  
16.77 million (256 each for red, green and blue)  
2 W + 2 W (EIAJ)  
Speakers  
Two internal  
External connection terminals  
Video  
• Video input  
One BNC terminal  
One S terminal  
1Vp-p/75 Ω  
• S video input  
Y: 1Vp-p/75 Ω  
C: 0.286Vp-p/75 Ω  
• Component video input Three BNC terminals Y: 1Vp-p/75 Ω  
Pb/B-Y: 0.7Vp-p/75 Ω  
Pr/R-Y: 0.7Vp-p/75 Ω  
• NTSC, PAL, SECAM, N-PAL, M-PAL, 4.43NTSC  
• RGB input One 15-pin 3-row mD-sub terminal  
Video signal: 0.7Vp-p/75 Ω  
SYNC signal: TTL level or 0.3 Vp-p/75 Ω  
Compatible format  
PC  
PC card  
Audio  
PCMCIA Rel. 2.0/JEIDA Ver. 4.0 or later  
5 V ATA card (Type I-III)  
• Audio input  
One system with two pin plug terminals  
(L/R) 500 mVrms/22 kmin.  
Control  
• RS-232C  
One D-sub 9-pin terminal  
Operating conditions  
Temperature: 0 to 40°C Humidity: 20 to 90 %  
Accessories  
Two cable clampers, one power cord(PDS4204W-H x 3, PDS4204E-H x 1),  
one remote controller (P-42RM03-B), two AA batteries, one user's manual,  
two brackets (two types), two screws (two types), two keys, three installation  
floppy disks for PC Car Utility for Plasmavision, one operating guide  
• Specifications and external appearance may be changed for the sake of improvement.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
RGB input terminal (Display is RGB INPUT.)  
Connects to a personal computer RGB output terminal.  
Pin No.  
Input signal  
Red  
Pin No.  
Input signal  
1
2
3
4
9
Green  
10  
Ground  
Blue  
11  
12  
13  
5
Ground  
Ground  
Ground  
Ground  
Hor. sync  
Vert. sync  
The sync switch (TTL/ANALOG  
6
7
8
14  
switch) is on the rear of the 13-pin hori-  
zontal sync and 14-pin vertical sync  
terminals.  
15  
Outer side  
Ground  
RS-232C input terminal (Display is RS-232C.)  
Connects to a personal computer RS-232C terminal.  
Pin No.  
No. Signal  
1
2
3
4
5
DCD (Data Carrier Detect)  
RD (Receive Data)  
TD (Transmit Data)  
DTR (Data Terminal Ready)  
GND (Ground)  
6
7
8
9
DSR (Data Set Ready)  
RTS (Request To Send)  
CTS (Clear To Send)  
RI (Ring Indication)  
Regulation····PDS4204W-H/PDS4204E-H  
• UL, CSA ······Safety: UL1950/CSA C22.2 No.950/FCC Class  
EMC: FCC Part 15 Class A  
• CE ···············Safety: EN60950 1992A1: 1993/A2: 1993  
EMC: EN55022  
EN61000-3-2  
1994, Class A  
1995  
EN61000-3-3  
EN50082-2  
1995  
1995  
EN61000-4-2  
1995  
EN61000-4-4  
1995  
EN61000-4-8  
1993  
ENV50140  
1993  
ENV50141  
1993  
ENV50204  
1995  
• AS ···············Safety: IEC950 A1/A2/A3/A4  
EMC: AS/NZS 3548  
Points about shipping  
The Plasmavision is a precision instrument, and requires dedicated packing materials for shipping.  
* Use Fujitsu's packing materials only  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CARE AND MAINTENANCE  
BEFORE CLEANING  
For stubborn grime, soak the soft cloth in neutral cleaning  
Always unplug the power cord from the  
socket.  
agent diluted with water, wring it out well, and wipe clean.  
Then, finish with a dry, soft cloth.  
Cleaning the cabinet and remote controller  
Cleaning the screen  
Do not use benzene, paint thinner, or other solvents. They  
can cause deterioration or paint peeling on the cabinet,  
the screen front filter, or the remote controller.  
Wipe gently with a soft cloth.  
The surface of the screen is easily scratched, so do not  
strike it or rub it with anything hard.  
Wipe gently with a soft cloth.  
BEFORE REQUESTING REPAIR  
If you think a malfunction may have occurred, check the following items.  
When this happens  
• The power does not come on.  
• The picture dose not appear.  
Check  
• Is the power cord disconnected?  
• Is a cable to other equipment disconnected?  
• The remote controller does not work.  
• Are the batteries installed with their poles reversed?  
• Are the batteries flat?  
• Are you operating from far away?  
• Are you trying to operate with the transmitting section of the  
remote controller not facing the reception section of the  
display?  
• Is there any obstruction between the display and the remote  
controller?  
• There is a creaking sound.  
• There is a humming sound.  
• This sound is generated by the expansion and contraction of  
the cabinet owing to change in the room temperature.  
• The Plasmavision has heat radiation fins to prevent its internal  
temperature from rising too high during operation. The sound  
you hear is the fan rotating.  
• There are dots on the screen.  
• Is the connected tuner being affected by interference from a  
car, train, high-voltage line, neon light, or the like?  
• The colors and tints are not good.  
• There is no sound.  
• Do any of the video settings need readjusting?  
• Are the internal speakers switched off?  
ERROR MESSAGE CONDITION 1 is displayed. • The fan is malfunctioning. Switch off the power.  
ERROR MESSAGE CONDITION 2 is displayed. • The temperature inside the set has risen far too high.  
Switch off the power. (The power can be turned on once the  
temperature lowers.)  
• INVALID CARD is displayed.  
• Is the inserted PC card the correct type?  
Use the recommended PC card.  
• NO CARD is displayed.  
• Are you attempting operation without any PC card in the  
PC card slot?  
• DATA READING ERROR is displayed.  
• Data of the PC card cannot be read. Check that the data used  
by the “program creation software” is correct.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Eiki Projector LC SXIU User Manual
Electro Voice Microphone N D478 User Manual
Fisher Paykel Washer WL37T26D User Manual
Fitness Quest Exercise Bike 482u User Manual
Foundry Networks Network Hardware FGS624P User Manual
Frigidaire Cooktop FGEC3665K User Manual
Gainward DVD VCR Combo 7300GT User Manual
Garmin GPS Receiver 17X NMEA 2000 User Manual
GE Fryer 169025 User Manual
GE Refrigerator 162D3904P005 User Manual