BL01765-200
Using a Mount Adapter
Thank you for buying a FUJIFILM product. The FUJIFILM M MOUNT ADAPTER
allows M-mount lenses to be mounted on the X-Pro1, which in turn can process
images taken with M-mount lenses as required to maintain image quality and
correct for a variety of effects. Note that using the M-mount adapter requires
camera firmware version 1.10 or later; check the firmware version before pro-
ceeding.
MOUNT ADAPTER SETTING Options
Pressing the function button on the mount adapter displays l MOUNT ADAPTER SETTINGS options.
Choosing a Focal Length
If the lens has a focal length of 21, 24, 28, or 35 mm, choose a matching option in the
menu at right. For other lenses, select option 5 or 6 to display the menu shown below
at left, press the selector right to display focal length settings, and use the selector to
enter the focal length.
R The camera adjusts the size of the bright frame in the optical viewfinder according to lens focal length.
17 mm or less 18 mm–60 mm 61 mm orr mmoorre
Bright frame not displayed.
Both white and blue frames are dis- Both red and blue frames are dis-
played, the former for infinity and played. The frames are not adjusted
the latter for distances of about for focal length, making the elec-
2 m/6.6 ft.
tronic viewfinder the recommend-
ed choice for framing pictures.
R The camera does not automati-
cally correct for parallax.
Download from Www.Somanuals.com. All Manuals Search And Download.
Color Shading Correction
Color (shading) variations between the center and edges of the frame can be adjusted
separately for each corner.
L
To use color shading correction, follow the steps below.
Choose a corner.
1
Rotate the command dial to choose a corner. The selected corner is indicated by a
triangle.
Adjust shading.
2
Use the selector to adjust shading until there is no visible difference in color be-
tween the selected corner and the center of the image. Press the selector left or
right to adjust colors on the cyan–red axis, up or down to adjust colors on the blue–
yellow axis. There are a total of 19 positions available on each axis.
ET
CANCEL
R To determine the amount required, adjust color shading correction while taking photos of blue sky or a sheet of gray
paper.
Peripheral Illumination Correction
Choose from values between –5 and +5. Choosing positive values increases peripher-
al illumination, while choosing negative values reduces peripheral illumination. Posi-
tive values are recommended for vintage lenses, negative values to create the effect
of images taken with an antique lens or a pinhole camera.
R To determine the amount required, adjust peripheral illumination correction while taking photos of blue sky or a
sheet of gray paper.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a Mount Adapter: Cautions
• Attaching a mount adapter enables m SHOOT WITHOUT LENS and hides the distance indicator in the standard
displays for the LCD monitor and optical/electronic viewfinder.
• Before checking focus, set the focus mode selector to M.
• If you find it hard to see the display in the viewfinder when a mount adapter is attached, follow these steps to
increase viewfinder brightness:
Use the VIEW MODE button to enable automatic display selection using the eye sensor.
Press the Q button.
Put your eye to the viewfinder.
Highlight J LCD BRIGHTNESS with the selector and use the command dial to adjust brightness.
1
2
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
|