TUMBLE ACTION WASHER
Owner’s Guide
LAVADORA CON TAMBOREACCIÓN
Manual de l’utilisateur
Product Record
serial number of your product. You will find the model and
serial number printed on an identification plate located at the
top, inside of the door opening.
Tumble Action Washer Warranty ............................... 2
IMPORTANT SAFETY INSTRUCTIONS ................. 3-4
Washing Procedures ............................................. 5-7
Stain Removal ...................................................... 7-8
Common Washing Problems ..................................... 9
Care and Cleaning ..............................................10-11
Avoid Service Checklist ..................................... 11-12
Español ............................................................ 13-23
In the space below, record the date of purchase, model and
Model No. ______________________________________
Date of Purchase _______________________________
Serial No. _____________________________________
Save these instructions and your sales receipt for future
reference.
P/N 134305700B (0404)
Download from Www.Somanuals.com. All Manuals Search And Download.
This Use and Care Guide provides
general operating instructions for your
washer. It also contains information
about features for several other
models. Your washer may not have
every feature included here.
Important Safety Instructions
Read all instructions before using this w asher.
To reduce the risk of fire, electrical shock, or injury to persons
when using this washer, comply with the basic warnings listed below.
Failure to comply with these warnings could result in serious personal
injuries.
Use the washer only as instructed in
this Use and Care Guide and the
Operating Instructions included with
your washer.
Prevent Fire
Your safety and the safety of
others is very important.
Do not wash items that have been previously cleaned in,
soaked in, or spotted with gasoline, cleaning solvents, kerosene, cooking oils,
waxes, etc. Do not store these items on or near the washer. These
We have provided many important
safety messages in the Use and
Care Guide, Operating Instructions,
Installation Instructions and on your
appliance. Always read and obey all
safety messages.
substances give off vapors or chemical reactions that could ignite or explode.
Do not put oily or greasy rags or clothing on top of the washer.
These substances give off vapors that could ignite the materials.
Do not add gasoline, cleaning solvents, or other flammable or
explosive substances to the wash water. These substances give off vapors
that could ignite or explode.
This is the safety alert symbol.
This symbol alerts you to hazards
that can kill or hurt you or others. All
safety messages will be preceded by
the safety alert symbol and the word
"DANGER" or "WARNING". These
words mean:
Under certain conditions, hydrogen gas may be produced in a
hot water system that has not been used for 2 weeks or more. HYDROGEN
GAS IS EXPLOSIVE. If the hot water system has not been used for such a
period, before using the washer, turn on all hot water faucets and let the water
flow from each for several minutes. This will release any accumulated
hydrogen gas. Hydrogen gas is flammable; do not smoke or use an open
flame during this time.
DANGER
You will be killed or
seriously injured if you don't follow
instructions.
Do not store or use gasoline or other flammable vapors or
liquids in the vicinity of this or any other appliance.
You can be killed or
seriously injured if you don't follow
instructions.
Failure to comply with these warnings could result in fire, explosion,
serious bodily injury and/or damage to the rubber or plastic parts of the
washer.
All safety messages w ill identify
the hazard, tell you how to reduce
the chance of injury, and tell you
w hat can happen if the
Protect Children
instructions are not follow ed.
Do not allow children to play on or in the washer. Close
supervision of children is necessary when the washer is used near children.
As children grow, teach them the proper, safe use of all appliances.
Pedestal
Apedestalaccessoryspecificallydesigned
forthiswashermaybeusedwhenelevating
the washerforease ofuse.
Failure to use accessoriescertified bythe
manufacturercouldresultinpersonalinjury,
propertydamageordamagetothewasher.
Destroy the carton, plastic bag and other packing materials
after the washer is unpacked. Children might use them for play. Cartons
covered with rugs, bedspreads or plastic sheets can become airtight
chambers.
Keep laundry products out of children's reach. To prevent
personal injury, observe all warnings on product labels.
Before the washerisremoved from service ordiscarded,remove
the washerdoorto prevent accidentalentrapment.
Failure to complywith these warningscould result in seriouspersonalinjuries.
Printed in U.S.A.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Prevent Injury
Important Safety
To prevent shock hazard and assure stability during operation,
Instructions (continued)
the washer must be installed and electrically grounded by a qualified service
person in accordance with local codes. Installation instructions are packed in
the washer for installer's reference. Refer to INSTALLATION INSTRUCTIONS
for detailed grounding procedures. If the washer is moved to a new location,
have it checked and reinstalled by a qualified service person.
Avoid fire hazard or
electrical shock. Do not use an
adaptor plug or extension cord or
remove grounding prong from
electrical pow er cord. Failure to
follow this w arning can cause
serious injury, fire or death.
To prevent personal injury or damage to the washer, the
electrical power cord of the washer must be plugged into a properly grounded
and polarized 3-prong outlet. The third grounding prong must never be
removed. Never ground the w asher to a gas pipe. Do not use an
extension cord or an adaptor plug.
Grounding type
w all receptacle
Do not under any
circu m st a n ce s, cu t ,
remove, or bypass
the grounding prong
from this plug.
Follow package directions when using laundry products.
Incorrect usage can produce poisonous gas--resulting in serious injury or
death.
•
Do not combine laundry products for use in 1 load unless specified on the
label.
•
Do not mix chlorine bleach with ammonia or acids such as vinegar.
To prevent serious personal injury and damage to the washer:
All repairs and servicing must be performed by an authorized
servicer unless specifically recommended in this Owner's Guide. Use
only authorized factory parts.
Pow er supply cord w ith 3-prong
grounding plug
•
CORRECT
Use this w ay ONLY
•
•
•
Do not tamper with controls.
Do not install or store the washer where it will be exposed to the weather.
Do not install on carpet. Install washer on a solid floor. It may be
necessary to reinforce the floor to prevent vibration or movement.
Do not use or mix
liquid chlorine bleach w ith other
household chemicals such as
toilet cleaners, rust removers, acid
or products containing ammonia.
These mixtures can produce
dangerous fumes w hich can cause
serious injury or death.
To reduce the risk of electric shock, disconnect this appliance
from the power supply before attempting any user maintenance. Turning the
controls to the OFF position does not disconnect this appliance from the
power supply.
To prevent injury, do not reach into the washer while parts are
moving. Before loading, unloading or adding items, push in the cycle selector
knob and allow the drum to coast to a complete stop before reaching inside.
Failure to comply with these warnings could result in serious personal
injuries.
This washer is equipped with an electrical overload protector. The motor
will stop if it becomes overheated. The washer will automatically restart after a
cool down period of up to 30 minutes, if the washer has not been manually
turned off during this time.
SAVE THESE INSTRUCTIONS
Note: The instructions appearing in
this Owner's Guide are not meant to
cover every possible condition and
situation that may occur. Common
sense and caution must be
As an ENERGY STAR® Partner,
Electrolux Home Products has determined
that this product meets the ENERGY STAR®
guidelines for energy efficiency.
practiced when installing, operating
and maintaining any appliance.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
Follow the guidelines below for preparing the wash load.
Washing Procedures
Read the Operating Instructions card for operating your specific model.
Alw ays read and follow fabric care and laundry product labels.
To reduce the risk of fire, electrical shock, or injury to persons,
read Important Safety Instructions, pages 3-4, before operating this washer.
1. Sort laundry into loads that can be w ashed together.
Sort items by recommended water temperatures and wash time.
•
Separate white, light, and colorfast items from dark and noncolorfast
items.
•
Separate items which shed lint from items which attract lint.
Permanent press, synthetic, knit and corduroy items will pick up lint
from towels, rugs and chenille bedspreads.
Sort laundry into loads that can be
washed together.
•
•
•
Separate heavily soiled items from lightly soiled items.
Separate lacy, sheer and loosely knit items from sturdy items.
Do not machine wash items containing fiberglass. Small particles of
fiberglass left in the drum may stick to fabrics in other loads and
cause skin irritation.
2. Prepare items for w ashing.
•
•
•
Empty pockets.
Brush off lint and dirt. Shake out rugs and beach towels.
Close zippers, fasten hooks, tie strings and sashes, and remove
nonwashable trims and ornaments.
Empty pockets.
•
Remove pins, decorative buttons, belt buckles, and other objects
which could be damaged. This also helps protect other items in the
wash load.
•
•
Mend rips and tears to prevent further damage during washing.
Place delicate items such as bras, shoulder pads, hosiery, and belts
in a mesh bag to prevent tangling during the wash cycle.
Turn knit items inside out to prevent pilling.
•
3. Pretreat stains and heavy soil.
See Stain Removal, pages 7-8, for details.
4. Add laundry load to w asher.
Place delicate items in a mesh bag.
•
Combine large and small items in a load. Load large items first. Large
items should not be more than half the total wash load.
•
Washing single items such as a sweater, towel or jeans may cause an
out-of-balance load. Add 1 or 2 similar items to help balance the load.
•
•
Single heavy items such as a bedspread can be washed separately.
The washer can be fully loaded, but the items should not be tightly
packed. The door should close easily.
Add laundry load to washer.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Add detergent, bleach and fabric softener to automatic dispenser follow ing these steps:
A. OPENING AND CLOSING THE DISPENSER
DRAWER
B. DETERGENT
• Add measured detergent to the detergent
compartment of the dispenser drawer.
• Detergent is flushed from the dispenser at the
beginning of the cycle. Either powdered or liquid
detergent can be used. Note: Liquid detergent will
drain into the washer drum as it is added.
• Low sudsing detergent is recommended for this
washer. Use the manufacturer's recommended
amount.
• If low sudsing detergent is not available, a reduced
amount of regular detergent may be used.
Because reducing the amount of detergent may
reduce cleaning, it is important to pretreat stains,
sort carefully by color and soil level, and avoid
overloading.
• Slowly open the dispenser drawer by first sliding
the safety latch to the right, then pulling the drawer
out until it stops.
• After adding laundry products, slowly close the
dispenser drawer. Closing the drawer too quickly
could result in early dispensing of the bleach and
fabric softener.
• Laundry products used with powder or liquid
detergent, such as color-safe bleach, water
conditioner, detergent booster, and enzyme
products should be added to the empty tub before
loading.
Note: From time to time you may see water in the
bleach and fabric softener compartments. This is a
result of the siphoning action and is part of the
normal operation of the washer.
• Detergent usage may need to be adjusted for water
temperature, water hardness, size and soil level of
the load.
• For best results, avoid oversudsing.
C. LIQUID BLEACH
D. FABRIC SOFTENER
• If desired, measure out the recommended amount
of liquid chlorine bleach (not to exceed 1/3 cup (80
mL)) and pour it into the center compartment
labeled "Liquid Bleach" and marked with this
symbol.
• If desired, pour the recommended amount of fabric
softener into the compartment labeled "Fabric
Softener" and marked with this symbol
• Dilute concentrated softeners with warm water to
the Fill Line.
• Do not exceed the maximum fill line. Overfilling
can cause early dispensing of the bleach which
could result in damaged clothes.
• Do not pour undiluted liquid chlorine bleach directly
onto the load or into the drum. Fabric damage can
occur.
• Do not exceed the maximum fill line. Overfilling
can cause early dispensing of the fabric softener
which could result in stained clothes.
• Do not pour fabric softener directly on the
w ash load.
• Use of a fabric softener dispensing ball is not
recommended in tumble action washers.
• Do not use pow dered bleach in the dispenser.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Select the cycle, temperature and speed settings options
and features according to type, size, and soil level of each
load.
Washing Procedures
(continued)
(See Operating Instructions for your specific model.)
7. Start the w asher.
Close the washer door and press START. The washer will fill and tumble.
•
•
•
For your safety, the door will automatically lock during the entire wash
cycle and "DOOR LOCK" will be displayed.
To change selections after the cycle has started, press STOP/CLEAR
twice. Make changes and restart the washer.
To interrupt the cycle, press STOP/CLEAR once to pause the washer.
"PAU" will be displayed. If the load was tumbling when the cycle was
interrupted, the door will open immediately. If the load was spinning,
the door will remain locked for 1 - 2 minutes for your safety. DO NOT
force open the locked door.
•
•
To restart the washer, press START again. (However, the washer will
automatically restart after 5 minutes.
To stop the washer, press STOP/CLEAR twice. Two dashes will be
displayed for approximately thirty seconds.
8. Remove items w hen the cycle is completed.
Place washed items in automatic dryer, line dry, or dry flat as directed by
fabric care label. Excess wrinkling, color transfer or odors may develop in
items left in the washer after the cycle has ended.
9. General Precautions
• If the dispenser draw er is opened during operation, the w asher w ill
shut off and the door w ill unlock. "d:do" (dispenser door) will be
displayed. Slowly close the dispenser drawer, and press START to
continue cycle.
• Do not slam the w asher door closed or try to force the door open
w hen locked ("DOOR LOCK" w ill be displayed). This could result in
damage to the washer.
• DO NOT leave the w asher door open. An open door could entice
children to hang on the door or crawl inside the washer. Note: If there are
no small children present, leave the door ajar to prevent odor build.
• To avoid damaging the washer and personal injury, DO NOT hang on or
lean against the washer door.
Do not store or place laundry products
on top of washer at any time. They can
damage the finish or controls.
• Do not place detergent, bleach or fabric softener containers on top of the
washer. They can damage the finish or controls.
Safe Stain Removal Procedures
Stain Removal
To reduce the risk of fire or serious injury to persons or
property, comply with the basic warnings listed below:
Do not use or mix
liquid chlorine bleach w ith other
household chemicals such as toilet
cleaners, rust removers, acid or
products containing ammonia.
These mixtures can produce
• Read and comply with all instructions on stain removal products.
• Keep stain removal products in their original labeled containers and out
of children's reach.
• Thoroughly wash any utensil used.
dangerous fumes w hich can cause
serious injury or death.
• Do not combine stain removal products, especially ammonia and
chlorine bleach. Dangerous fumes may result.
• Never wash items which have been previously cleaned in, washed in,
soaked in or spotted with gasoline, dry cleaning solvents or other
flammable or explosive substances because they give off vapors that
could ignite or explode.
• Never use highly flammable solvents, such as gasoline, inside the
home. Vapors can explode on contact with flames or sparks.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
For successful stain removal:
•
•
Remove stains promptly.
Determine the kind of stain, then follow the recommended treatment in
the stain removal chart below.
•
To pretreat stains, use a prewash product, liquid detergent, or a paste
made from granular detergent and water.
•
•
Use cold water on unknown stains because hot water can set stains.
Check care label instructions for treatments to avoid on specific
fabrics.
•
•
Check for colorfastness by testing stain remover on an inside seam.
Rinse and wash items after stain removal.
Follow fabric care label instructions.
Stain Removal
STAIN
TREATMENT
Adhesive tape, chewing gum, Apply ice. Scrape off excess. Place stain face down on paper towels. Saturate with prewash stain remover or
rubber cement nonflammable dry cleaning fluid.
Baby formula, dairy products, Use product containing enzymes to pretreat or soak stains. Soak for 30 minutes or more. Wash.
egg
Beverages (coffee, tea, soda, Pretreat stain. Wash using cold water and bleach safe for fabric.
juice, alcoholic beverages)
Blood
Rinse with cold water. Rub with bar soap. Or, pretreat or soak with product containing enzymes. Wash using
bleach safe for fabric.
Candle wax, crayon
Scrape off surface wax. Place stain face down between paper towels. Press with warm iron until wax is
absorbed. Replace paper towels frequently. Treat remaining stain with prewash stain remover or
nonflammable dry cleaning fluid. Hand wash to remove solvent. Wash using bleach safe for fabric.
Chocolate
Pretreat or soak in warm water using product containing enzymes. Wash using bleach safe for fabric.
Pretreat with prewash stain remover or rub with bar soap.
Collar or cuff soil, cosmetics
Dye transfer on white fabric
Gra ss
Use packaged color remover. Wash using bleach safe for fabric.
Pretreat or soak in warm water using product containing enzymes. Wash using bleach safe for fabric.
Grease, oil, tar (butter, fats,
salad dressing, cooking oils,
car grease, motor oils)
Scrape residue from fabric. Pretreat. Wash using hottest water safe for fabric. For heavy stains and tar, apply
nonflammable dry cleaning fluid to back of stain. Replace towels under stain frequently. Rinse thoroughly.
Wash using hottest water safe for fabric.
Ink
Some inks may be impossible to remove. Washing may set some inks. Use prewash stain remover,
denatured alcohol or nonflammable dry cleaning fluid.
Mildew, scorch
Wash with chlorine bleach if safe for fabric. Or, soak in oxygen bleach and hot water before washing. Badly
mildewed fabrics may be permanently damaged.
Mud
Brush off dry mud. Pretreat or soak with product containing enzymes.
Pretreat with prewash stain remover. Wash using bleach safe for fabric.
Mustard, tomato
Nail polish
May be impossible to remove. Place stain face down on paper towels. Apply nail polish remover to back of
stain. Repeat, replacing paper towels frequently. Do not use on acetate fabrics.
Paint, varnish
Perspiration
WATER BASED: Rinse fabric in cool water while stain is wet. Wash. Once paint is dry, it cannot be removed.
OIL BASED AND VARNISH: Use solvent recommended on can label. Rinse thoroughly before washing.
Use prewash stain remover or rub with bar soap. Rinse. Wash using nonchlorine bleach in hottest water safe
for fabric.
Rust, brown or yellow
discoloration
For spots, use rust remover safe for fabric. For discoloration of an entire load, use phosphate detergent and
nonchlorine bleach. Do not use chlorine bleach because it may intensify discoloration.
Shoe polish
LIQUID: Pretreat with a paste of granular detergent and water. PASTE: Scrape residue from fabric. Pretreat
with prewash stain remover or nonflammable dry cleaning fluid. Rinse. Rub detergent into dampened area.
Wash using bleach safe for fabric.
Urine, vomit, mucus, feces
Pretreat or soak in product containing enzymes. Wash using bleach safe for fabric.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Common Washing Problems
Many washing problems involve poor soil and stain removal, residues of lint and scum, and fabric damage. For
satisfactory washing results, follow these suggestions provided by The Soap and Detergent Association.
PROBLEM POSSIBLE CAUSES
SOLUTIONS
PREVENTIVE MEASURES
Blue stains
• Undiluted liquid detergent or
fabric softener dispensed directly
onto fabric.
• If caused by detergent, mix 1 cup (240
ml) white vinegar with 1 quart (.95 L)
water in a plastic container. Soak item 1
hour. Rinse.
•Avoid overfilling detergent and fabric
softener compartments of dispenser.
• If caused by fabric softener, rub stains
with bar soap. Wash.
Discoloration,
graying
• Not enough detergent.
• Wash water temperature too low.
• Incorrect sorting.
• Rewash with correct amount of
detergent and hottest water safe for
fabric. Add bleach safe for fabric.
• Sort items by soil level and color.
• Use correct amount of detergent, hottest
water and bleach safe for fabric.
Greasy, oily stains • Not enough detergent.
• Undiluted liquid fabric softener
poured directly on fabric.
• Treat with prewash stain remover or
liquid detergent.
• Increase detergent and water
temperature. Rewash.
• Use correct amount of detergent and
hottest water safe for fabric.
• Do not pour liquid fabric softener
directly on fabric. See Washing
Procedures for directions on adding
softener.
• Rub fabric softener stains with bar soap.
Holes, tears, or
sn a g s
• Incorrect use of chlorine bleach.
• Unfastened zippers, hooks,
buckles.
• Rips, tears and broken threads.
• Overloading the washer.
• Degradation of fabric.
• May be irreversible if rips, tears and
seams cannot be mended.
• Never pour chlorine bleach directly on
fabric.
• Check condition of items before washing.
See Washing Procedures for preparing
and loading the wash load and adding
chlorine bleach.
Lin t
• Incorrect sorting.
• Reduce load size. Rewash using correct • See Washing Procedures for sorting and
• Tissues left in pocket.
• Overloading the washer.
• Not enough detergent.
• Undissolved detergent has left
a residue resembling lint.
• Static cling is attracting lint.
• Load washed too long.
water temperature, water level, and
amount of detergent.
• Add nonprecipitating water conditioner
to wash water to remove detergent
residue.
preparing the wash load.
• Do not overload washer.
• Use correct temperature and amount of
detergent, water and wash time.
• Add liquid fabric softener to final rinse.
• Dry load in dryer.
• Remove lint with lint brush or roller.
Pilling
• Pilling is normal with synthetic
and permanent press fabrics.
This is due to abrasion from
normal wear.
• Use a lint brush or shaver to remove
pills.
• Use fabric softener in the washer to
lubricate fibers.
• When ironing, use spray starch or fabric
finish on collars and cuffs.
(Fibers break off,
ball up and cling to
fabric.)
• Turn items inside out to reduce abrasion.
Residue or
pow der on dark
it e m s;
Stiff, harsh
fa brics.
• Undissolved detergent.
• Some nonphosphate granular
detergents can combine with
hard water minerals to form a
residue.
• Rew ash load.
• Increase water temperature using hottest
water safe for fabric.
• Do not overload washer.
• Use liquid detergent or use nonprecipitating
water conditioner with nonphosphate
granular detergent.
• Overloading the washer.
Wrinkling
• Overloading the washer.
• Incorrect wash cycle for wash
load.
•Reduce load size.
• Do not overload washer.
• Remove items from washer as soon as
cycle is completed.
•Rinse in cold w ater w ith liquid fabric
softener using the Perm Press or Delicate
cycle.
• Use liquid fabric softener.
Yellow buildup of • Agitation time too short.
•Soak in detergent booster or product
containing enzymes.
• Select correct wash cycle.
• Use correct amount of detergent.
body soil on
• Wash water temperature too low.
synthetic fabrics • Not enough detergent.
•Wash in hot w ater (120°F/49°C)using full • Wash synthetics frequently using hot or
permanent press cycle. Increase
detergent.
warm water.
Add bleach safe for fabric.
• Or,treat with colorremover.
Yellow or brow n • Iron or manganese in water
• To restore discolored load ofwhites,use
rust removersafe forfabric.
• Do not use chlorine bleach to remove
rust stains. It may intensify
discoloration.
• Use nonprecipitating water softener.
• Before washing, run hot water for a few
minutes to clear lines.
• Drain water heater occasionally.
• For an ongoing problem, install an iron filter
in your water supply system.
rust stains
supply, water pipes, or water
heater.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Cleaning
Outside
•
When washing is completed, wipe top and sides of washer with a damp
cloth. Turn water faucets off to prevent pressure build-up in the hoses.
•
As needed, clean the cabinet with mild soap and water. Never use harsh,
gritty or abrasive cleansers. If door or console becomes stained, clean
with diluted chlorine bleach [1/2 cup (120 ml) in 1 quart (.95 L) water].
Rinse several times with clear water.
•
•
Remove glue residue from tape or labels with a mixture of warm water and
mild detergent. Or, touch residue with the sticky side of the tape or label.
Before moving the w asher, place a strip of cardboard or thin fiberboard
under the front leveling legs to prevent floor damage.
Figure 1
Cleaning the Dispenser Draw er Area
Detergent and fabric softener may build up in the dispenser drawer. Residue
(Lock tab is visible only after drawer has
been pulled out)
should be removed once or twice a month.
•
•
Remove the drawer by first sliding the safety latch to the right, then pulling
the drawer out until it stops. (Figure 1)
Reach back into the left rear corner of the drawer cavity and press down
firmly on the lock tab (left rear portion of the drawer). Pull out the drawer.
(Figure 2)
•
•
Remove the inserts from the bleach and fabric softener compartments.
(Figure 3)
Rinse the drawer and inserts with hot tap water to remove traces of
accumulated powders and liquids. Large amounts of fabric softener
residue may indicate improper dilution or more frequent cleaning is
required.
Figure 2
•
•
To clean the drawer opening, use a small brush to clean the recess.
Remove all residue from the upper and lower parts of the recess. (Figure 4)
Return the bleach and fabric softener inserts to their proper compartments.
Replace the dispenser drawer and run the Prewash cycle without any wash
load in the drum.
Inside
•
•
•
•
Remove items from the washer as soon as the cycle ends. Excess
wrinkling, color transfer, and odors may develop in items left in the washer.
Before cleaning the washer interior, unplug the electrical pow er cord to
avoid electrical shock hazards.
Figure 3
Dry around the washer door opening, flexible gasket, and door glass.
These areas should always be clean to ensure a water tight seal.
When extremely soiled items have been washed, a dirty residue may
remain on the drum. Remove this by wiping the drum with a nonabrasive
household cleanser. Rinse thoroughly with water.
•
The plastic drum vanes may become stained from fabric dye. Clean these
parts with a nonabrasive household cleanser. This prevents dye transfer to
future loads.
Figure 4
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Winterizing Instructions
Care and Cleaning
If the washer is stored in an area where freezing can occur or moved in
freezing temperatures, follow these winterizing instructions to prevent damage
to the washer:
(continued)
1. Turn off water supply faucets.
2. Disconnect hoses from water supply and drain water from hoses.
3. Plug electrical cord into a properly grounded electrical outlet.
Follow Winterizing
Instructions for cold
w eather care.
4. Add 1 gallon (3.8 L) nontoxic recreational vehicle (RV) antifreeze to empty
wash drum. Close door.
5. Select the Drain/Spin option under Cycles. Press START and let the
washer spin for 1 minute to drain out all the water. No all of the RV
antifreeze will be expelled.
6. Press Stop/Clear, unplug electrical power cord, dry off drum interior and
close door.
7. Remove dispenser drawer. Drain any water in compartments and dry
compartments. Replace drawer.
8. Store washer in an upright position.
9. To remove antifreeze from washer after storage, run empty washer
through a complete cycle using detergent. Do not add w ash load.
Avoid Service Checklist
Before calling for service, review this list. It may save both time and expense. The list includes common concerns that are
not the result of defective workmanship or materials in this washer.
POSSIBLE CAUSE / SOLUTION
OCCURRENCE
NOISE
High pitch "jet engine" noise.
Rattling and clanking noise.
• A certain amount of motor whine is normal during the spin cycle.
• Foreign objects such as coins or safety pins may be in drum or pump. Stop
washer and check drum. If noise continues after washer is restarted, objects
may be in pump. Call your authorized servicer.
• Belt buckles and metal fasteners are hitting wash drum. To prevent
unnecessary noise and damage to drum, fasten fasteners and turn items
inside out.
Squealing sound or hot rubber odor.
Thumping sound.
• Washer is overloaded. Do not overload washer. Stop washer and reduce
load.
• Heavy wash loads may produce a thumping sound. This is usually normal. If
sound continues, washer is probably out of balance. Stop washer and
redistribute wash load.
Vibrating noise.
• Washer is not resting firmly on floor. Move washer so it rests firmly on floor.
Adjust leveling legs. See INSTALLATION INSTRUCTIONS for details.
• Shipping bolts and foam block have not been removed during installation.
See INSTALLATION INSTRUCTIONS for removing shipping bolts and foam
block.
• Wash load unevenly distributed in drum. Stop washer and rearrange wash
load.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
OCCURRENCE
POSSIBLE CAUSE / SOLUTION
OPERATING
Washer does not start.
• Electrical power cord may not be plugged in or connection may be loose.
Make sure plug fits tightly in wall outlet.
• House fuse blown, circuit breaker tripped, or a power outage has occurred.
Reset circuit breaker or replace fuse. Do not increase fuse capacity. If
problem is a circuit overload, have it corrected by a qualified electrician. If
problem is a power outage, call local electric company.
• Water supply faucets are not turned on. "F03" is displayed.Turn on water
supply faucets.
• Motor is overheated. Washer motor will stop if it becomes overheated. It will
automatically restart after a cool down period of up to 30 minutes (if washer
has not been manually turned off).
• Dispenser drawer is not completely closed. Close dispenser drawer.
• Washer door is not completely closed. "dr" (door open" is displayed.Close
door completely.
• Dispenser drawer is not completely closed. "d:do" (dispenser door) is
displayed. Close dispenser drawer.
Washer w on't spin.
• Load is too small. Add 1 or 2 similar items to help balance the load.
Residue left in drum.
WATER
Water collects in bleach and fabric
softener compartments.
• Heavily soiled items. Wipe drum with a nonabrasive household cleanser,
then rinse. Shake or brush excess dirt and sand from items before washing.
• This is a result of the siphoning action and is part of the normal operation of
the washer. Water may be removed by removing the dispenser drawer (see
Page 10, Figures 1 and 2) and draining water into the empty drum or sink.
• Washer is overloaded. Do not overload washer. See Washing Procedures.
• Load is too small. Add 1 or 2 similar items to help balance the load.
• Load is out of balance. Rearrange load to allow proper spinning.
• Drain hose is kinked. Straighten drain hose.
Wash load too w et after spin.
• Water supply is not adequate in area. "F03" is displayed. Check another
faucet in the house. Wait until water supply and pressure increase.
Water does not enter w asher or it
enters slow ly.
• Water supply faucets are not completely open. "F03" is displayed. Fully open
hot and cold faucets.
• Water is being used elsewhere in the house. Water pressure must be at least
30 psi (260 kPa). Avoid running water elsewhere while washer is filling.
• Water inlet hoses are kinked. Straighten hoses.
• Hot water heater is set too low or is a distance from washer. Measure hot
water temperature at nearby faucet with candy or meat thermometer. Water
temperature should be at least 120°F (49°C). Adjust water heater as
necessary.
Warm or hot w ater is not hot enough.
• Hot water is being used elsewhere in the house. Avoid using hot water
elsewhere before or during washer use. There may not be enough hot water
available for proper cleaning. If problem persists, your hot water system may
be unable to support more than 1 use at a time.
• Drain hose is kinked or clogged. Clean and straighten the drain hose.
• Maximum standpipe height is 8' (2.4 m).
Water in w asher does not drain or
drains slow ly.
• Fill hose connection is loose at faucet or washer. Check and tighten hose
connections. Install rubber sealing washers provided.
Water leaks.
• House drain pipes are clogged. Unclog drain pipes. Contact plumber if
necessary.
• Oversudsing. Use less detergent.
• Hot and cold water hoses are connected to wrong supply faucets. Connect
hot water hose to hot water faucet and cold water hose to cold water faucet.
Incorrect w ash and rinse
temperatures.
• Drain hose standpipe is incorrect height. Standpipe must be a minimum of
23.6" (60 cm) high to prevent siphoning. See INSTALLATION
INSTRUCTIONS.
Water is entering w asher but tub does
not fill.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
|