INSTALLATION INSTRUCTIONS FOR PART 95-5025
APPLICATIONS
FORD Mustang
1987-1993
95-5025
KIT FEATURES
• Double DIN Head Unit Provision
• ISO Stacked Head Unit Provision
KIT COMPONENTS
A) Double DIN Brackets • B) Double DIN Trim plate • C) (4) # 8 X 1” Phillips Screws
C
A
B
WIRING ANDANTENNA CONNECTIONS (Sold Separately)
• 70-1770 - Ford harness - 1985-2004
TOOLS REQUIRED:
• Phillips Screwdriver • Socket Wrench • Rotary Cutting Tool
• Radio Removal Tools (Part # 86-5618)
1-800-221-0932
© COPYRIGHT 2009 METRA ELECTRONICS CORPORATION
Download from Www.Somanuals.com. All Manuals Search And Download.
95-5025 DASH DISASSEMBLY
FORD MUSTANG 1987-1993
A
1
2
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
Using Metra's 86-5618, pull the
factory head unit from the dash and
disconnect the wiring. (Figure A)
3
Remove two 7/16” hex bolts from inside the dash cavity and remove the radio
sub-dash bracket. (See recommended tool list on front cover)
Note: The threaded studs from under this bracket will also need to be removed for
the aftermarket Double DIN radio to clear. (Figure B)
Continue to kit assembly.
B
7/16” (2)
HEX BOLTS
RADIO SUB-DASH BRACKET
ALSO REMOVE (2) THREADED STUDS FROM UNDER BRACKET
1
Download from Www.Somanuals.com. All Manuals Search And Download.
95-5025 KIT ASSEMBLY
DOUBLE DIN HEAD UNIT PROVISION/
ISO STACKED HEAD UNIT PROVISION
A
1
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2
3
Attach the Double DIN brackets to the
Double DIN radio or stacked ISO head
units using the screws supplied with
the radio. (Figure A)
B
Mount the head unit/ kit assembly to
the dash using the four supplied # 8 x
1” Phillips screws. (Figure B)
1-800-221-0932
REV. 08-19-09 © COPYRIGHT 2009 METRA ELECTRONICS CORPORATION INST95-5025
Download from Www.Somanuals.com. All Manuals Search And Download.
|