DTX-NSM
Network Service Module
Getting Started Guide
The DTX-NSM Network Service Module lets you do the following:
•
Verify connection to the network, including connection speed, duplex
configuration, link wiring, and PoE service (wiring and PoE functions for
twisted pair only)
•
•
Ping IP addresses
Monitor network traffic for utilization, collisions, errors, and broadcast
packets
•
•
Blink a port's activity LED
Use Fluke Networks LinkRunner Cable ID locators (optional) to identify link
connections at a patch panel (twisted pair only)
Note
Running network tests on a fiber link requires an optional SFP module.
Accessing the Product Manuals
This guide provides basic information to help you get started using the module.
For more detailed information, see the latest versions of the DTX Series Users
Manual and the DTX Series Technical Reference Handbook provided on the DTX
Product Manuals CD and on the Fluke Networks website.
PN 2544310 (English) January 2006
2006 Fluke Corporation. All rights reserved. Printed in USA.
All product names are trademarks of their respective companies.
Download from Www.Somanuals.com. All Manuals Search And Download.
Verifying Network Connectivity
The network connectivity test tells you if a network jack is connected to the
switch or hub. The test also provides details about the link's configuration and
includes a ping function for verifying connectivity to stations on the network.
Setting Up for the Connectivity Test
1
Turn the rotary switch to SETUP, select Network Settings > IP Address
Assignment; then select one of the following:
•
•
Select DHCP to have the network's server assign IP addresses.
Select Static to assign addresses manually.
In Static mode, a second tab appears on the Network Settings screen.
On this tab, enter the DTX Address, Subnet Mask, and Gateway
(optional) and DNS Server (optional) addresses. These addresses are
typically available from a network installer, administrator, technician, or
from network documentation.
2
Use one of the following methods to enter ping addresses (optional):
•
In the latest version of LinkWare software, select Utilities > DTX Utilities
> Ping Target List to create and download an address list. See the
LinkWare online help for details.
•
On the tester's Network Settings tab, select Target Addresses. Press
J Create; then enter the Name and IP Address of a device you want
to ping.
Download from Www.Somanuals.com. All Manuals Search And Download.
Running the Connectivity Test
1
2
3
Connect to the network using a twisted pair or fiber patch cord.
Turn the rotary switch to MONITOR; then select Network Connectivity.
Press P. Figure 2 describes some of the features on the network
connectivity results screen.
4
To save the results press N, then select Save Standalone Result or Add to
Cable Test Result. Use the appropriate keys to create an ID for the
standalone result or save the result with an existing cable test result.
A Network speed, duplex mode, PoE
(Power over Ethernet) status, and
MDI/MDI-X status.
B Select Negotiation Details for details
on the connection.
1
2
C The addresses used and the number
of ping replies received:
3
: Green: Ping replies received for all
requests.
: Orange: At least one ping reply
received.
: No ping replies received, indicating a
problem with the connection.
4
D Use the softkeys to run additional
can03.eps
connectivity tests.
Figure 2. Network Connectivity Results
Download from Www.Somanuals.com. All Manuals Search And Download.
Identifying Links (twisted pair only)
The ID Locator function helps you quickly identify link connections at a patch
panel. This function requires one or more optional Fluke Networks LinkRunner
Cable ID locators.
To identify a link:
1
2
3
Connect one or more cable ID locators to one end of the link(s).
Turn the rotary switch to MONITOR, select ID Locator; then press P.
Connect the tester to different jacks, pressing P to rescan each time, until
Found Cable ID and the identifier's number appears.
Registration
Registering your product with Fluke Networks gives you access to valuable
information on product updates, troubleshooting tips, and other support
services.
To register, fill out the online registration form on the Fluke Networks website
Contacting Fluke Networks
+1-425-446-4519 or 1-800-283-5853
•
•
•
•
•
•
•
•
•
•
Australia: 61 (2) 8850-3333 or 61 (3) 9329 0244
Beijing: 86 (10) 6512-3435
Brazil: 11 3044 1277
Canada: 1-800-363-5853
Europe: +44-(0)1923-281-300
Hong Kong: 852 2721-3228
Japan: 03-3434-0510
Korea: 82 2 539-6311
Singapore: 65-6799-5566
Taiwan: (886) 2-227-83199
Visit our website for a complete list of phone numbers.
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY AND LIMITATION OF LIABILITY
Fluke Networks mainframe products will be free from defects in material and
workmanship for one year from the date of purchase. Parts, accessories, product repairs
and services are warranted for 90 days, unless otherwise stated. Ni-Cad, Ni-MH and Li-Ion
batteries, cables or other peripherals are all considered parts or accessories. This warranty
does not cover damage from accident, neglect, misuse, alteration, contamination, or
abnormal conditions of operation or handling. Resellers are not authorized to extend any
other warranty on Fluke Networks’ behalf. To obtain service during the warranty period,
contact your nearest Fluke Networks authorized service center to obtain return
authorization information, then send your defective product to that Service Center with a
description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS FITNESS FOR
A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE NETWORKS IS NOT LIABLE
FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES,
ARISING FROM ANY CAUSE OR THEORY. Since some states or countries do not allow the
exclusion or limitation of an implied warranty or of incidental or consequential damages,
this limitation of liability may not apply to you.
Fluke Networks
PO Box 777
Everett, WA 98206-0777
USA
4/04
Download from Www.Somanuals.com. All Manuals Search And Download.
|