Fisher Price Swing Sets G5912 User Manual

G5912  
Product features and decorations may vary from picture above.  
WARNING  
IMPORTANT! KEEP INSTRUCTIONS FOR FUTURE REFERENCE.  
Please read these instructions before assembly and use of this product.  
Adult assembly is required.  
Tool needed for battery installation: Phillips Screwdriver (not included).  
Requires four LR14 alkaline batteries for operation (not included).  
Weight Limit: 9 kg (20 lbs).  
e
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts  
Pad  
Seat Back Tube  
Frame  
Lower Swing Arm Assembly  
(with Restraint System)  
3 Link Toys  
Front Tube  
2 Frame Tubes  
#6 x 1.9 cm Screws - 4  
Shown Actual Size  
NOTE: Tighten and loosen all  
screws with a Phillips screwdriver.  
Do not over-tighten the screws.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
IMPORTANT! Before assembly, inspect this product for  
damaged hardware, loose joints, missing parts or sharp  
edges. DO NOT use if any parts are missing or broken.  
Contact Mattel for replacement parts and instructions  
if needed. Never substitute parts.  
Press Button  
on Front Tube  
Press Button on  
Lower Frame Tube  
Upper Frame Tube  
Rubber Feet Down  
1
2
Rotate the upper frame tube until it "snaps" into an upright  
position, as shown.  
Position the front tube so that the rubber feet are flat on  
the surface.  
While pressing the button on the lower frame tube, insert it  
into an end of the front tube. Continue to insert the lower  
frame tube into the front tube until you hear a "click".  
While pressing the button on the front tube, insert it into  
the end of the lower frame tube. Continue to insert the  
front tube into the lower frame tube until you hear  
a "click".  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
Frame  
Lower Frame Tubes  
Press Button  
on Upper  
Frame Tube  
Pull Front Tube  
3
Pull the front tube to be sure it is secure to each lower  
frame tube.  
4
While pressing the buttons on the upper frame tubes,  
insert them into the holes in the underside of the frame.  
Continue to insert the upper frame tubes into the frame  
until you hear a "click" on both sides.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
Upper Swing Arms  
Upper Frame  
Tube  
Frame  
Upper Frame  
Tube  
Lower Swing Arm Assembly  
(with Restraint System)  
5
6
Fit the lower swing arm assembly to the outer side of the  
upper swing arms.  
Check to be sure the upper frame tubes are secure in the  
frame. If you can remove the upper frame tubes from the  
frame, you have not properly inserted the tubes into the  
frame. Remove the upper frame tubes from the frame and  
repeat Assembly step 4.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
Seat Back Tube  
Buttons  
#6 x 1.9 cm Screws - 4  
7
Shown Actual Size  
Insert two #6 x 1.9 cm screws through the upper swing arm  
and into the lower swing arm. Tighten the screws.  
Swing Arm Short Tubes  
8
Position the seat back tube so that it curves toward the back  
of the swing.  
While pressing the buttons on the seat back tube, fit the  
seat back tube into the short tubes on the swing arms.  
Push the seat back tube until it “clicks” into place.  
Pull up on the seat back tube to be sure it is secure to the  
swing arms.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
Pad Top Pocket  
Slot  
Slot  
Pad Lower Pocket  
Fastener  
Waist Belts  
Seat Bottom Tube  
Seat Back Tube  
9
Fit the top pocket on the pad over the seat back tube .  
Lift the seat bottom tube and fit the lower pocket on the  
pad over the seat bottom tube .  
10  
From behind the seat, insert the waist belts into the slots in  
the pad.  
Push to fasten the restraint system to the pad.  
Assembly is now complete.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Battery Installation  
Hint: We recommend using alkaline  
batteries for longer battery life.  
1.5V x 4  
LR14  
SHOWN ACTUAL SIZE  
Battery Holder  
2
Battery Compartment Door  
Open the battery holder.  
Insert four LR14 alkaline batteries as indicated inside the  
battery holder.  
Close the battery holder.  
Battery Holder  
1
Locate the battery compartment door on the frame.  
Loosen the screws in the battery compartment door.  
Battery Compartment Door  
Remove the battery compartment door and the battery  
holder from the battery compartment.  
Battery Holder  
3
Align the ridge on the battery holder with the groove in the  
battery compartment.  
Slide the battery holder back into the battery compartment.  
Replace the battery compartment door and tighten  
the screws.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Battery Safety Information  
Set-Up & Use  
Batteries may leak fluids that can cause a chemical burn  
injury or ruin your product. To avoid battery leakage:  
Do not mix old and new batteries or batteries of different  
types: alkaline, standard (carbon-zinc) or rechargeable  
(nickel-cadmium).  
WARNING  
To prevent serious injury or death  
from falls and being strangled in  
the restraint system:  
- Always use the restraint system.  
- Not recommended for children  
who can sit up by themselves  
(6 months approximately, until  
9 kg, 20 lbs).  
Insert batteries as indicated inside the battery compartment.  
Remove batteries during long periods of non-use. Always  
remove exhausted batteries from the product. Dispose of  
batteries safely. Do not dispose of batteries in a fire. The  
batteries may explode or leak.  
Never short-circuit the battery terminals.  
Use only batteries of the same or equivalent type  
as recommended.  
Do not charge non-rechargeable batteries.  
Remove rechargeable batteries from the product  
before charging.  
• Never leave child unattended.  
If removeable, rechargeable batteries are used, they are  
only to be charged under adult supervision.  
• It is dangerous to use this product  
on an elevated surface.  
IMPORTANT! Before each use, inspect this product for  
damaged hardware, loose joints, missing parts or sharp  
edges. DO NOT use if any parts are missing or broken.  
Contact Mattel for replacement parts and  
instructions if needed. Never substitute parts.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set-Up & Use  
Securing Your Child  
Anchored End  
Waist Belt  
Restraint  
Free End  
Tighten  
Anchored End  
Free End  
Loosen  
2
To tighten the restraint straps:  
Feed the anchored end of the restraint strap up through  
the buckle to form a loop . Pull the free end of the restraint  
strap .  
Waist Belt  
To loosen the restraint straps:  
Crotch Belt  
Feed the free end of the restraint strap up through the buckle  
to form a loop . Enlarge the loop by pulling on the end of  
the loop toward the buckle. Pull the anchored end of the  
restraint strap to shorten the free end of the restraint strap .  
1
Place your child in the seat. Position the crotch belt between  
your child’s legs.  
Fasten the waist belts to the crotch belt. Make sure you  
hear a “click” on both sides.  
Check to be sure the restraint system is securely attached by  
pulling it away from your child. The restraint system should  
remain attached.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set-Up & Use  
Power Dial  
Starting the Swing  
Power Dial  
Turn the power dial to any of eight settings.  
Give the seat a light push to start the swinging motion. Adjust the swing power dial to the desired swing motion setting.  
Hint: As with most battery-powered swings, a heavier child will reduce the amount of swinging motion on all settings. In most cases,  
the low setting works best for a smaller child while the high setting works best for a larger child.  
If swinging stops while using a lower setting, try a higher setting. Give the seat a light push to start the swinging motion again.  
Be sure to turn this product off when not in use. Turn the power dial to the off setting  
.
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set-Up & Use  
Hint: Your baby can enjoy lights and music with or without swinging.  
Baby Activated  
Parent Activated  
Lights and  
Music Switch  
Lights and  
Music Switch  
Volume Dial  
Slide the lights and music switch to:  
When baby pulls either toy on the arch, one tune plays along with twinkling lights.  
On this setting, six tunes (approximately 10 minutes) play along with dancing lights.  
On this setting, music plays for about 10 minutes.  
Turns lights and music off.  
Turn the volume dial to a comfortable listening level.  
IMPORTANT! Low battery power may cause this product to operate erratically (no sounds/movement) and the product  
may not turn off. Remove and throw away all four batteries and replace with four, new LR14 alkaline batteries.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set-Up & Use  
Room-to-Room Portability  
WARNING  
To prevent serious injury or death  
from falls and being strangled in the  
restraint system, always use the  
restraint system.  
• It is dangerous to use this product  
on an elevated surface.  
3 Link Toys  
Fit the link toys to either of the hanging toys on  
the swing.  
Make sure your child is properly secured in the swing seat.  
With baby facing forward and outward, lift the swing using  
the handle.  
Carefully carry the swing to another room. Be sure to set the  
swing down on a non-elevated, flat surface.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Take Along  
Lift Seat Back  
Lift Seat Bottom  
Seat Back  
Press Tabs  
2
1
Tip the swing backwards with the seat back down.  
Press both tabs on the frame at the same time to release the  
frame base.  
Lift the seat back and seat bottom together.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Take Along  
Care  
The frame, pad, liner and toys may be wiped clean using a  
mild cleaning solution and a damp cloth. Do not immerse  
the frame.  
Lower Frame Tube  
This product has no consumer serviceable parts. Do not  
take this product apart.  
IMPORTANT! Never use this product without the  
provided pad.  
3
Rotate the lower frame tube around to the top of frame,  
as shown.  
To set the swing back up for use:  
Rotate the lower frame tube around until it snaps  
into place.  
Place the swing on a non-elevated, flat surface.  
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.  
© 2004 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.  
PRINTED IN CHINA  
G5912pr-0726  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Echo Blower Type 1E PB 2100 User Manual
Electro Voice Speaker EVH 1152S 96 User Manual
Fellowes Chipper T580C User Manual
FieldServer Computer Drive FS 8700 70 User Manual
Fostex Power Supply X 24 User Manual
Frigidaire Dishwasher FFPD1821M W B User Manual
GE Answering Machine 16174120 User Manual
Genius Portable Radio DU1 DU2 User Manual
GE Telephone 15401270 User Manual
Golf Buddy GPS Receiver Plus User Manual