L2332
Please keep this instruction sheet for future reference, as it
contains important information.
Requires three “AA” (LR6) alkaline batteries (not included).
Adult assembly is required.
Tool required for assembly: Phillips screwdriver (not included).
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Installation
Battery Safety Information
In exceptional circumstances, batteries may
leak fluids that can cause a chemical burn
injury or ruin your product. To avoid bat-
tery leakage:
• Do not mix old and new batteries or batteries
of different types: alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium).
1.5V x 3
"AA" (LR6)
SHOWN ACTUAL SIZE
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of
non-use. Always remove exhausted batteries
from the product. Dispose of batteries
safely. Do not dispose of product in a fire.
The batteries inside may explode or leak.
Battery Compartment Door
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent
type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
Bottom View
• Locate the battery compartment on the
bottom of the toy.
• Loosen the screw in the battery compartment
door. Remove the battery compartment door.
• Insert three “AA” (LR6) alkaline batteries.
Hint: We recommend using alkaline batteries
for longer battery life.
• Replace the battery compartment door and
tighten the screw.
• When sounds from this toy become faint
or stop, it’s time for an adult to change
the batteries.
• Protect the environment by not disposing
of this product with household waste
(2002/96/EC). Check your local authority
for recycling advice and facilities
(Europe only).
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Spire
Tube
Flat Post
1
Drawbridge
•Position the drawbridge so that the door-
knocker is facing down.
•Insert the peg on one end of the drawbridge
into the hole in the base of the castle.
3
•Fit the spire onto the top of the castle, being
sure that the tube on the bottom of the spire
fits over the flat post.
•Bend the drawbridge slightly and insert the
other peg into the other hole in the base of
the castle.
•Press down on the spire to “snap” it into place.
Spire
Horn
Peg
2
•Fit a horn onto the peg on each side of the spire.
•Insert a screw into each horn. Tighten
the screws.
Balcony
ꢀ
•“Snap” the balcony into the slots in the front
of the castle.
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Royal Fun For Everyone!
Push the tower flag. The drawbridge
lowers while trumpets blare.
Post
Bottom View
5
• Fit the fence posts to the pegs on the bottom
of the caste.
• Insert a screw into each post and tighten.
On/Off Switch
Slide the On/Off switch to
to turn the toy on and to to
O
turn it off.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumer Information
Care
Call Fisher-Price Consumer Relations, toll-free at
• Wipe the toy with a clean cloth dampened
with a mild soap and water solution.
• Do not immerse the toy.
®
1-800-432-5437, 9 AM – 7 PM (EST) Monday
through Friday and 11 AM – 5 PM (EST) Saturday.
Hearing-impaired consumers using TTY/TDD
equipment, please call 1-800-382-7470. Write to
®
us at: Fisher-Price Consumer Relations, 636
FCC Statement
Girard Avenue, East Aurora, New York 14052.
United States Only
For countries outside the United States:
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by
CANADA Questions? 1-800-ꢀ32-5ꢀ37. Mattel Canada Inc., 6155
GREAT BRITAIN: Mattel UK Ltd, Vanwall Business Park, Maidenhead
AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag
#870, Richmond,Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA: Mattel East Asia Ltd, Room 1106, South Tower, World Finance
Centre, Harbour City, Tsimshatsui, HK, China.
turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
Note: Changes or modifications not expressly
approved by the manufacturer responsible for
compliance could void the user's authority to
operate the equipment.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
|