C5352
Instructions
Please keep this instruction sheet for future reference, as it contains important information.
Requires three “AA” (LR6) alkaline batteries (not included).
Adult assembly is required.
Tool required for assembly: Phillips screwdriver (not included).
TM
™
™
Time to Cook Barbie Kitchen
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Refrigerator Side
1
3
3
4
#8 x / " Screw - 2
Groove
Refrigerator Shelf
Tabs
3
4
•Position refrigerator side with the tabs down.
•Slide the refrigerator shelf (ribbed side down) into the groove
in the refrigerator side.
•Insert two #8 x / " screws into the refrigerator assembly
and tighten.
4
3
4
Refrigerator Side
#8 x / " Screw - 2
2
•Position the refrigerator assembly on its side. Insert two
3
4
#8 x / " screws into the holes on the back of the refrigerator
assembly, as shown. Tighten the screws.
•Fit the other refrigerator side to the shelf and refrigerator
side assembly.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Refrigerator Assembly
Lower Shelf
5
7
★
Base
•Locate the lower shelf, marked with a ★. Position the lower
shelf with the ribbed side down.
•Fit the lower shelf onto the base, as shown.
•“Snap” the refrigerator assembly into the base.
•Pull up on the refrigerator assembly to be sure it is secure.
8
3
4
#8 x / " Screw
6
Refrigerator Bottom
3
4
•Insert a #8 x / " screw into the lower hole inside the
•“Snap” the refrigerator bottom into the base, as shown.
refrigerator assembly, as shown.
•Tighten the screw to secure the lower shelf.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Oven Housing
9
11
★
3
4
#8 x / " Screw
Bottom View
•Turn the assembly over so the bottom is facing you.
3
4
•Insert one #8 x / " screw into the post in the base,
as shown.
•Tighten the screw to secure the lower shelf.
•Turn the assembly upright.
•“Snap” the oven housing, marked with a ★, into the lower
shelf, as shown.
12
3
4
#8 x / " Screw - 2
10
Long Post
★
Back View
3
4
•From the back of the toy, insert two #8 x / " screws into the
oven housing and tighten.
•“Snap” the long post, marked with a ★, into the lower shelf.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Upper Shelf
Short Post
▲
▲
13
15
Upper Shelf
•“Snap” the short post, marked with a ▲, into the upper shelf.
Microwave Housing
16
•Locate the upper shelf, marked with a ▲. Position the
upper shelf with the ribbed side down.
•Fit the upper shelf onto the long post and oven housing,
as shown.
▲
14
3
4
#8 x / " Screw
•“Snap” the microwave housing, marked with a ▲ into the
upper shelf, as shown.
3
4
•Insert a #8 x / " screw into the upper hole inside the
refrigerator assembly, as shown.
•Tighten the screw to secure the upper shelf.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
19
3
3
17
4
4
#8 x / " Screw - 3
#8 x / " Screw - 2
Bottom View
•With the front of the assembly facing you, insert three
3
4
#8 x / " screws through the main assembly and into
the countertop.
•Tighten the screws to secure the countertop.
3
4
•From the back of the toy, insert two #8 x / " screws into the
microwave housing. Tighten the screws to secure the
microwave housing.
20
3
4
#8 x / " Screw - 4
18
Bottom View
•Turn the assembly around so the back of the assembly
is facing you.
3
Post
4
•Insert four #8 x / " screws through the main assembly
and into the countertop. Tighten the screws to secure
the countertop.
•Turn the assembly upright.
Countertop
Large Opening
Bottom View
•Place the countertop on a flat surface with the ribbed side
facing up and the large opening to the left.
•Position the main assembly upside down over the counter-
top with the posts to the right.
•“Snap” the main assembly into the countertop as shown.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
21
23
3
4
#8 x / " Screw - 2
Window Assembly
Refrigerator Door
Countertop
Refrigerator
Handle
•Fit the refrigerator handle to the refrigerator door and hold
it in place.
3
4
•Insert two #8 x / " screws through the refrigerator door and
into the refrigerator handle.
•Tighten the screws to secure the refrigerator handle.
Oven Handle
•“Snap” the window assembly into the slots in
the countertop.
24
3
4
#8 x / " Screw - 2
Oven Door
3
22
4
#8 x / " Screw - 4
•Fit the oven handle to the oven door and hold it in place.
3
4
•Insert two #8 x / " screws through the oven door and into
the oven handle.
•Tighten the screws to secure the oven handle.
25
3
4
#8 x / " Screw - 2
Microwave Door
Microwave Handle
•Fit the microwave handle to the microwave door and hold it
Bottom View
in place.
3
4
•Insert two #8 x / " screws through the microwave door and
•Turn the assembly over so the bottom is facing you.
•Insert four #8 x / " screws through the main assembly and
into the window assembly, as shown.
•Tighten the screws to secure the window assembly.
•Turn the assembly upright.
into the microwave handle.
•Tighten the screws to secure the microwave handle.
3
4
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
27
26
ꢁ
ꢀ
Microwave Door
Oven Door
•At an angle, fit the lower microwave door peg into the lower
hole in the main assembly
.
ꢀ
ꢁ
•Then, “snap” the upper microwave door peg into the upper
hole in the main assembly
ꢀ
.
ꢁ
28
Refrigerator Door
•At an angle, fit the right oven door peg into the right hole in
the main assembly ꢀ.
•Then, “snap” the left door peg into the left hole in the main
assembly ꢁ.
ꢀ
ꢁ
•At an angle, fit the upper refrigerator door peg into the upper
hole in the main assembly ꢀ.
•Then, “snap” the lower refrigerator door peg into the lower
hole in the main assembly ꢁ.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
31
29
3
4
#8 x 1 / " Screw - 2
ꢀ
ꢁ
ꢁ
3
4
•Insert a #8 x 1 / " screw into each shelf.
•Tighten the screws to secure the shelves.
•First, “snap” the large flower oven knob into the center hole
in the countertop ꢀ.
•Then, “snap” the remaining two oven knobs into the holes
on either side of the large flower oven knob ꢁ.
Faucet Handle
32
Peg
Window Assembly
Faucet
30
Sink Post
•Fit the hole in the faucet over the post on the sink as shown.
•Insert and “snap” the peg on the bottom of the faucet
handle into the sink post.
Utensil Shelf
Plate
Shelf
Phone
33
Serving
Tray
Sink
Back View
Front View
•Position the assembly so the back side is facing you.
•Fit the utensil shelf to the window assembly, as shown.
•Fit the plate shelf to the window assembly, as shown.
•Place the sink in the large opening in the countertop.
•Place the phone in the opening on the side of the clock.
•Place the serving tray onto the countertop.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Label Decorations
•Apply the labels as
shown in the illustration.
•For best results, wash
your hands before
applying the labels and
make sure the areas to
which the labels will be
applied are clean and
dry. Avoid repositioning
a label once it has
been applied.
Front View
Battery Installation
Battery Compartment Door
1.5V x 3
“AA” (LR6)
Shown Actual Size
Battery Safety Information
Batteries may leak fluids that can cause a chemical burn injury
or ruin your toy. To avoid battery leakage:
•Do not mix old and new batteries or batteries of different
types: alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium).
•Insert batteries as indicated inside the battery compartment.
•Locate the battery compartment on the back of the
window assembly.
•Loosen the screws in the battery compartment door with a
Phillips screwdriver. Remove the battery compartment door.
•Insert three “AA” (LR6) alkaline batteries, as indicated inside
the battery compartment.
Hint: We recommend using alkaline batteries for
longer life.
•Replace the battery compartment door and tighten
the screws.
•Remove batteries during long periods of non-use. Always
remove exhausted batteries from the toy. Dispose of batteries
safely. Do not dispose of batteries in a fire. The batteries may
explode or leak.
•Never short-circuit the battery terminals.
•Use only batteries of the same or equivalent type,
as recommended.
•Do not charge non-rechargeable batteries.
•Remove rechargeable batteries from the toy before charging.
•If removable, rechargeable batteries are used, they are only
to be charged under adult supervision.
•When sounds from this toy become faint or stop, it’s time
for an adult to change the batteries!
11
Download from Www.Somanuals.com. All Manuals Search And Download.
®
Prepare, Serve & Celebrate with Barbie !
You can press the flower button with no clock cards inserted to hear about everyday meals and themes.
Insert one of the clock cards into the front slot
on the Special Times™ Clock.
Turn the clock dial to one of the theme
pictures on the card.
Press the flower button on top of the Special
Times™ Clock to hear Barbie®!
Barbie® talks about the theme you’ve chosen
on your the clock card.
Hints:
• Both clock cards feature two sides with
fun themes: Birthday Parties, Tea Parties,
Sleepovers and Picnics.
s make
Let’
a birthday
cake!
• Store your clock cards in the back slot on
the Special Times™ Clock.
• Press the flower button, then remove
the phone to hear a special greeting
from Barbie®.
Consumer Information
Care
FCC Note (United States Only)
•Before using the cooking and eating utensils, hand wash
them in hot, soapy water.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
•Check the plastic parts regularly and if broken or cracked,
dispose of them properly.
•Wipe this toy with a clean cloth dampened with a mild
soap and water solution. Do not immerse this toy.
•This toy has no consumer serviceable parts. Do not take
this toy apart.
Questions? We'd like to hear from you!
Call Fisher-Price® Consumer Relations, toll-free at
1-800-432-5437, 8 AM - 6 PM EST Monday through
Friday. Hearing-impaired consumers using TTY/TDD
equipment, please call 1-800-382-7470. Or, write to:
Fisher-Price® Consumer Relations, 636 Girard Avenue,
East Aurora, New York 14052.
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment
and receiver.
•Consult the dealer or an experienced radio/TV technician
for help.
Note: Changes or modifications not expressly approved by
the manufacturer responsible for compliance could void the
user’s authority to operate the equipment.
For countries outside the United States:
CANADA Questions? 1-800-567-7724. Mattel Canada Inc.,
6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.
GREAT BRITAIN Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB.
Helpline: 01628 500302.
AUSTRALIA Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870,
Richmond, Victoria 3121 Australia. Consumer Advisory Service 1300 135 312.
NEW ZEALAND 16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre,
Harbour City, Tsimshatsui, HK, China.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
PRINTED IN MEXICO
©2004 Mattel, Inc. All Right Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
C5352pr-0920
|