H6727
Instructions
Christmas Train Set
Please keep this instruction sheet for future reference,
as it contains important information.
Requires three "AA" (LR6) alkaline batteries (not included).
Adult assembly is required.
Tool required for battery installation:
Phillips screwdriver (not included).
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts
2 Fences
3 Ramps
2 Track Pieces
Parts Not Shown:
4 Figures
3 Letters to Santa
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
1
Santa’s Chair
• Place the track piece with Santa’s chair on a hard, flat surface.
• “Snap” the other track piece onto the track with Santa’s chair, as shown.
Train Station
2
Santa’s Chair
• ”Snap” the train station to the track opposite Santa’s chair.
• “Snap” the three ramps around the track, as shown.
• “Snap” the fences to one of the ramps.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
3
Toll Gate
Toll Gate
Slotted Post
Slotted Post
• Locate the slotted post on the track near the train station.
• Press the tabs on the end of a toll gate into the slot until it “snaps” in place.
• Repeat the procedure to attach the other toll gate to the slotted post on the
ramp at the opposite end of the track.
4
• Place the accessories around the track, as shown.
Download from Www.Somanuals.co5m. All Manuals Search And Download.
Battery Installation
Battery Safety
Information
Battery
Compartment
Door
1.5V x 3
"AA" (LR6)
Shown Actual Size
In exceptional circumstances, batteries
may leak fluids that can cause a
chemical burn injury or ruin your
product. To avoid battery leakage:
• Do not mix old and new batteries
or batteries of different types:
alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside
the battery compartment.
• Remove batteries during long
periods of non-use. Always remove
exhausted batteries from the
product. Dispose of batteries safely.
Do not dispose of batteries in a fire.
The batteries may explode or leak.
• Never short-circuit the bat-
Bottom View
• Locate the battery compartment
door on the bottom of the the track.
• Loosen the screws in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door.
• Insert three "AA" (LR6) alkaline batteries.
Hint: We recommend using alkaline
batteries for longer life.
• Replace the battery compartment
door and tighten the screws with
a Phillips screwdriver. Do not
over-tighten.
• When sounds or motions become
faint or stop, it’s time for an adult to
change the batteries!
tery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from
the product before charging.
• If removable, rechargeable batteries
are used, they are only to be
charged under adult supervision.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Fun Sounds Around the Track!
Power Switch
• Locate the power switch on the bottom of the track.
• Slide the switch to the position to turn the toy on.
• Push the train along the track to hear fun sounds as it travels around the town.
• Spin the Santa’s chair to hear a Christmas song.
• Slide the switch to off position when you are finished playing with the toy.
• Push the clamp on one train car onto
the post of another train car to
connect them.
Post
Clamp
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Care
• Wipe this toy with a clean cloth dampened with a mild soap and water
solution. Do not immerse this toy.
• This toy has no consumer serviceable parts. Do not take this toy apart.
Consumer Information
Call Fisher-Price® Consumer Relations, toll-free at 1-800-432-5437,
8 AM - 6 PM EST Monday through Friday. Hearing-impaired
consumers using TTY/TDD equipment, please call 1-800-382-7470.
Write to us at: Fisher-Price® Consumer Relations, 636 Girard Avenue,
East Aurora, New York 14052.
FCC Note (United States Only)
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate
the equipment.
For countries outside the United States:
CANADA: Questions? 1-800-432-5437. Mattel Canada Inc., 6155 Freemont Blvd.,Mississauga, Ontario L5R 3W2;
GREAT BRITAIN: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500303;
AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond,Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City,Tsimshatsui, HK, China.
Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A.
H6727pr-0920
©2005 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA
Download from Www.Somanuals.com. All Manuals Search And Download.
|