Vibrating
Monitor
Model Number: 71599
For proper setup and use, please read these instructions.
Please keep this instruction sheet for future reference,
as it contains important information.
Transmitter is electrically powered.
Includes one AC adaptor to power receiver (plugs into
standard household outlets –120V AC). Receiver also runs on battery
power (3.6V, 400mAH nickel cadmium rechargeable battery – included).
Adult assembly is required to install the battery.
Tool needed for battery installation:
Phillips screwdriver (not included).
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiver Battery Installation
Your Fisher-Price® Vibrating Monitor includes a rechargeable battery.
Before first-time use, you will need to charge the battery (see next page).
Battery
Compartment D
Receiver Connector
Battery Connector
• Locate battery compartment door on back of receiver.
• Loosen screw in battery compartment door with a Phillips screw-
driver. Remove battery compartment door.
• Plug battery connector into receiver connector.
Hint: If battery connector will not plug into receiver connector, turn it over
and try again. Do not force the battery connector into the receiver connector.
• Replace battery compartment door. Tighten screw with a
Phillips screwdriver.
Battery Tips
• Remove the battery during long periods of non-use. Always
remove an exhausted battery from the product. Battery leakage
and corrosion can damage this product. Dispose of battery safely.
• Do not dispose of battery in a fire. The battery may explode or leak.
• Never short circuit the battery terminals.
• A non-rechargeable battery is not to be recharged.
• Only a battery of the same or equivalent type as recommended in
the “Battery Installation” instructions is to be used.
• If a removable rechargeable battery is used, it is only to be charged
under adult supervision.
• If you use a battery charger, it should be examined regularly for
damage to the cord, plug, enclosure and other parts. Do not use
a damaged battery charger until it has been properly repaired.
• Use only the provided AC adaptor to charge the battery.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Charging the Receiver Battery
Even with proper care, the rechargeable battery will not last forever.
The life of the rechargeable battery depends on how well you follow
these instructions and the total number of hours it is used. If you
should need to replace the rechargeable battery, a new one can
be purchased at most electronics stores or contact Fisher-Price®
Consumer Relations at 1-800-432-KIDS.
• Insert AC adaptor jack into receiver socket and then plug into
wall outlet.
• Charge the rechargeable battery for 10-12 hours. Do not overcharge
your battery.
Hint: When using the receiver with the AC adaptor, you will be charging
the battery while monitoring your baby!
Battery Disposal
Nickel cadmium batteries contain materials which are harmful to the
environment if not properly disposed. Contact the recycling center in
your community for proper disposal instructions.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Testing Reception (for Sound)
Test transmitter transmission and receiver reception
each time you change location of use.
Power
Indicator
Power
Switch
Power/Volume
Dial
Power
Indicator
Place receiver in room in which
you intend to use it. Rotate the
power/volume dial to turn power
on. Power indicator lights. Adjust
receiver location.
Place transmitter in room in which
you intend to use it. Rotate transmitter
power switch to turn power on. Power
indicator lights. Turn on a radio.
• Variable light display lights when
sound is received by receiver:
Adjust
Channel
- One two dots light for
shallow sounds.
- Three or more dots light for
louder sounds.
If you experience interference
(buzzing or static, etc.) while using
one channel setting, switch both
units to other channel. Selecting
a channel is usually a one time
adjustment.
Hint: All five dots in receiver variable light display light:
- If you turn receiver power on before transmitter power. You will also hear
static noise. Turn volume down on receiver and turn transmitter power on.
- If the receiver is too far away from the transmitter. Move the receiver closer
to the transmitter.
- If loud sounds are transmitting.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Testing Reception (for Vibrations)
Test transmitter transmission and receiver reception
each time you change location of use.
Power/Volume
Dial
Power
Indicator
Power
Switch
Vibrations
Ready
Indicator
Power
Indicator
Vibrations
Button
Place transmitter in room in which
you intend to use it. Rotate transmitter
power switch to turn power on. Power
indicator lights. Turn on a radio.
Clip receiver to your clothing (where
you will feel vibrations). Walk to the
furthest point of use. Rotate receiver
power/volume dial to turn power
on. Power indicator lights. Now, press
the vibrations button. Vibrations
ready indicator lights.
Hint: You can also place the
receiver in your pocket.
• When sound is received, vibrations
begin and variable light display
lights on receiver.
Power
Indicator
Power
Switch
• To turn off vibrations, press
vibrations button. Vibrations
ready indicator turns off.
• If you experience interference
(vibration) when it is obvious
that no sound is transmitting
while using one channel setting,
switch both units to other channel.
Selecting a channel is usually a
one time adjustment.
Vibrations Button
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup For Sounds‘n Lights Use
1
4
2
3
7
1
7
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT! Test sound reception of this monitor before first time
use and whenever you change location of transmitter (see page 5).
Set transmitter channel switch to same channel as receiver.
1
2
Place transmitter in same room with child. Point microphone
directly toward crib or play area.
Unwrap and fully extend power cord for best transmission.
Plug transmitter power cord into wall outlet.
3
4
Slide transmitter power switch to turn power on.
Power indicator lights.
Place receiver where you will see or hear it.
5
6
If you will be using receiver near a wall outlet, we recommend
that you use the AC adaptor. Unwrap and fully extend AC
adaptor cord for best reception. Plug AC adaptor cord into
wall outlet.
Rotate receiver power/volume dial to turn power on. Power
indicator lights. Rotate power/volume dial to adjust volume.
7
Note: AC adaptor is 120 VAC, 60Hz, 3W input; 6 VDC 100mA output;
center positive polarity; plug OD is 5.5 mm, plug ID is 1.5 mm.
If you have any questions about this product:
In Canada, call 1-800-567-7724, or write to: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2.
In Great Britain, telephone 01628 500303.
In Australia, Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870,
Richmond, Victoria 3121 Australia. Consumer Advisory Service 1-800-800-812
(valid only in Australia).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup For Vibrations Use
“Wah, Wah,
Wah…”
1
2
4
3
6
7
5
IMPORTANT! Test reception of this monitor before first time use
and whenever you change location of transmitter (see page 6).
Set transmitter channel switch to same channel as receiver.
1
2
Place transmitter in same room with child. Point microphone
directly toward crib or play area.
Unwrap and fully extend power cord for best transmission.
Plug transmitter power cord into wall outlet.
3
4
5
6
Slide transmitter power switch to turn power on.
Power indicator lights.
Clip receiver to your clothing, where you will feel vibrations.
Or, place the receiver in your pocket.
Rotate receiver power/volume dial to turn power on. Power
indicator lights. Rotate power/volume dial to adjust volume
(if you want to hear sounds).
Press the vibrations button. Vibrations ready indicator lights.
7
Hint: Under permitting conditions, the receiver receives sounds (and you
will feel vibrations) up to 1,000 feet away from baby.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Problems & Solutions
Circuit Breaker
5
“Ma, ma, ma.
Da, da, da…”
3
4
“That doesn’t
sound right. Maybe
we should check the
transmitter.”
6
BUZZZZ
2
1
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Problems & Solutions
PROBLEMS
SOLUTIONS
Transmitter power indicator
not lit.
Turn transmitter power on.
Power indicator lights.
1
1
2
You hear static or buzzing
from receiver.
Make sure channel switches on
both transmitter and receiver set
to same channel.
2
Transmitter power indicator
not lit.
Make sure light switch that
controls power flow to wall
outlet is on.
3
3
Transmitter power indicator
not lit.
Check AC adaptor cord
plug-to-outlet connection.
4
5
4
5
Transmitter power indicator
not lit.
Power is off because circuit breaker
for baby’s room off. Make sure
house fuses and circuit breakers
are on.
Check all five solutions above.
Any one or more of these solutions
should solve the problem.
You hear static or buzzing and
all five dots lit on receiver.
6
6
Hint: If, after checking all of these solutions, you believe that your
AC adaptor is damaged, please call Fisher-Price® at 1-800-432-KIDS.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Problems & Solutions
“Uh-oh, maybe I
should move closer
to the house.”
SOLUTION
PROBLEM
The receiver vibrates, all five
dots light and if you have the
sound turned up – you hear
static or buzzing.
Receiver is out of range of trans-
mitter. Move receiver closer to
transmitter.
Note: Range varies depending
on surrounding conditions such
as noise levels, physical obstruc-
tions and signal interference.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Problems & Solutions
“That’s gotta
be coming from
next door…”
“Did you read
about…”
PROBLEM
You can hear conversations or sounds from other homes.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
“Wah, Wah,
Wah…”
“That must
be Susie
next door…”
“I better get
off the phone,
she’s up…”
“Wah, Wah,
Wah…”
“Wah, Wah,
Wah…”
“Did you read
about…”
SOLUTION
There is signal interference due to other nursery monitors on same
channel or cordless telephone use. Change channel switches on
both transmitter and receiver to eliminate source of interference.
Hints:
- Do not use more than one transmitter and one receiver at same time
in same household.
- Always remember that you are using public airwaves when using
your monitor. Conversations, even from rooms near transmitter, may
broadcast to other nursery monitors, radios, cordless telephones, or
scanners outside your home. To protect privacy of your home, always
turn transmitter off when not in use.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumer Information
Occasionally a consumer may experience a problem with one of our
products. If this should happen, please call us toll-free, rather than
return this product to the store. Usually, we can solve the problem
over the telephone or send you replacement parts.
Please call Fisher-Price® Consumer Relations, toll-free at
1-800-432-KIDS, between 8 AM - 6 PM EST, Monday through Friday.
Hearing-impaired consumers using TTY/TDD equipment,
please call 1-800-382-7470.
Or write to:
Fisher-Price® Consumer Relations
636 Girard Avenue
East Aurora, New York 14052
Care
Excess dirt in transmitter microphone will hamper transmission of
sound. Clean outer surface of transmitter and receiver with a cloth
lightly dampened with a mild cleaning solution.
Never immerse transmitter, receiver or AC adaptor.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Note (United States Only)
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the manufac-
turer responsible for compliance could void the user’s authority to operate
the equipment.
Vibrating Monitor
Model Number: 71599
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Vibrating Monitor
Consumer Affairs Department
636 Girard Avenue
East Aurora, New York 14052
One (1) Year Limited Warranty
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, New York 14052 warrants that the Vibrating Monitor is free from
all defects in material and workmanship when used under normal conditions for a period of one (1) year from
the date of purchase. Should the product fail to perform properly, we will repair or replace it at our option, free of
charge. Purchaser is responsible for shipping the product to Consumer Relations at the address indicated above
and for all associated freight and insurance cost. Fisher-Price, Inc., will bear the cost of shipping the repaired or
replaced item to you. This warranty is void if the owner repairs or modifies the product. This warranty excludes
any liability other than that expressly stated above including but not limited to any incidental or consequential
damages.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,
SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY
FROM STATE TO STATE.
The electronic components in transmitter, receiver and AC adaptor are not designed for consumer repair. Evidence
of any attempt of consumer repair will void this warranty
.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052, U.S.A.
©2001 Mattel, Inc. All Rights Reserved.
® and ™ designate U.S. trademarks of Mattel, Inc.
Printed in China
71599pr-0920
Download from Www.Somanuals.com. All Manuals Search And Download.
|