INSTALLATION INSTRUCTIONS
USER GUIDE
Front loading clothes washer
WH8060P, WH7060P, WH8060J
and WH7060J models
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Introduction
3
4
Safety and warnings
Installation instructions
Before you do your first wash
Getting started quickly
Washer controls
6
13
14
18
Safety features
19
Sorting and loading
Detergent and fabric softener
Wash cycles
20
22
24
26
29
30
33
35
36
41
Wash cycle options
Customising wash cycles
Caring for your washer
Before you call for service
Fault codes
Troubleshooting
Product Fiche (according to EU 1061/2010)
Manufacturer’s Warranty
42
44
45
Customer Care
European Directive 2012/19/EU on Waste Electrical
and Electronic Equipment (WEEE)
Registration
ImpORTANT!
SAVE THESE INSTRUCTIONS
Register your product with us so we can
provide you with the best service possible.
The models shown in this user guide may
not be available in all markets and are
subject to change at any time. For current
details about model and specification
availability in your country, please go to
contact your local Fisher & Paykel dealer.
To register your product visit our website:
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Welcome
Thank you for buying a Fisher & Paykel clothes washer. We are proud of this washer and
trust it will serve you well for many years.
At Fisher & Paykel we aim to provide innovative products that are simple to use,
ergonomic and kind to the environment. Your washer has numerous wash cycles and
options so you can perform every wash task with ease and the knowledge your clothes
are receiving the best possible care.
Please take the time to read these instructions carefully before you begin using your
machine.
Following the advice in this user guide will ensure you get the performance you
expect from your machine and that you get the best possible wash results. Keep these
instructions for future reference.
We hope you enjoy your new washer. We have certainly enjoyed designing it for you.
Front loading washer models
3
Download from Www.Somanuals.com. All Manuals Search And Download.
SafETy aND WaRNINGS
IMPORTaNT SafETy INSTRUCTIONS
WARNING!
When using this appliance always exercise basic
safety precautions including the following:
• This clothes washer is not intended for use by
persons (including children aged below 8 years) with
reduced physical, sensory, or mental capabilities, or
lack of experience and knowledge, unless they are
supervised or given instructions on how to use the
washer by someone responsible for their safety and
they understand the hazards involved.
• The washer should only be used for washing and
rinsing of textiles where this is indicated on the care
label.
• The door will be locked from the start of the cycle
until the cycle is complete for safety reasons. It is
possible to open the door during the cycle under
certain conditions (refer to page 19).
• Never force the door open.
• Keep children away from the washer while it is in
operation.
• Children of less than 3 years should be kept away
unless continuously supervised.
• Cleaning and user maintenance shall not be made by
children without supervision.
• Supervise children to ensure they do not play with
the washer or climb inside the drum.
• Do not touch the glass part of the door during a
cycle as the door can become hot.
• Do not open the detergent dispenser during the
cycle as hot water may come out of it.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
SafETy aND WaRNINGS
• The only user-removable parts of the washer are
the inlet hoses, detergent dispenser and the pump
filter. No other parts are designed to be removed
by anyone other than a fisher & Paykel service
technician.
• When disposing of the washer, it is recommended
that the door is removed to avoid children getting
trapped inside, and that the electrical cable is cut off
close to the washer.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTaLLaTION INSTRUCTIONS
accessories
Please check you received the following accessories with your Fisher & Paykel washer.
You will find them inside the drum:
●●
●●
●●
●●
●●
●●
2 x Inlet hoses
1 x Drain hose guide
1 x Installation instructions and user guide
1 x Spanner
1 x Installation leaflet (attached to the top of the washer)
1 x Inlet valve cap
Unpacking
To ensure the best performance from your new washer please follow the instructions below.
Removing the packaging
Remove the outer packaging (including the polystyrene packer and plastic wrapping). All
packaging must be removed prior to use. Ensure these materials are kept out of reach of
children. Note: a small amount of water may be seen inside the packaging and inside the
washer. This is the result of factory testing and is normal.
1
Tilt the machine backwards and ‘walk’ it off the base one foot at a time. Not doing so
may cause damage to your floor and washer.
Remove all packaging and accessories from inside the drum.
2
3
Removing the transit bolts
The clothes washer is fitted with 4 transit bolts at the rear to avoid damage during
transportation.
ImpORTANT!
The 4 transit bolts MUST be removed prior to operation of the machine. failure to
remove these will result in damage to the machine.
To remove the bolts:
Use a spanner or socket to unscrew and remove all four transit bolts at the back of the
washer (C).
Pull the black rubber grommets to remove the bolt, grommet and white plastic spacers
from the machine. Keep the transit bolts in case they are required for future transit of the
machine. Never transport the machine without the transit bolts properly fixed in place.
Cover the bolt holes with the white plastic plugs which are attached to the machine and
located near each hole (p). Push to clip into place.
1
2
3
P
C
Removing the transit safety bolts
6
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTaLLaTION INSTRUCTIONS
Product dimensions
A
B
C
WH7060P
WH7060J
WH8060P
WH8060J
PRODUCT DIMENSIONS
mm
mm
850
600
Overall height of product
Overall width of product
850
600
A
B
C
Overall depth of product
Depth to door open
570
1010
620
1065
MaxIMUM CaPaCITy
kg
kg
7.0
8.0
Note: the exact height of your washer is dependent on how far the feet are extended
from the base of the machine. The space where you install your washer needs to be at
least 40 mm wider and 20 mm deeper than its dimensions.
●●
●●
●●
●●
Electrical supply: 220 – 240 V, 50 Hz Sinusoidal, minimum 10 A
Inlet water static pressure: Max. 1 MPa (150 psi), Min. 30 kPa (4.5 psi)
Inlet water flow rate at tap: Min. 6 litres/min
Standpipe/tub height: 800 – 1200 mm
7
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTaLLaTION INSTRUCTIONS
Location
ImpORTANT!
Install the machine on a solid and level floor surface ensuring it has at least 20 mm
clearance on each side. The washer must not be installed on any textured floor
coverings (eg carpet, rugs).
Levelling the machine
It is IMPORTANT to level the machine to ensure good spin
performance, and to minimise noise, vibrations and wear
and tear on the washer.
Before positioning the machine in its final position, check
that the machine is level, front to back and side to side.
Manoeuvre the product into its final position (we suggest a
minimum clearance of 20 mm each side).
Use a spirit level to check that the machine is correctly
level. If needed, pull the machine out and wind the feet up
1
2
3
Locking the feet
or down to correctly level the machine.
Using the spanner provided, tighten the lock nuts against
the base of the machine to lock the feet in position.
4
Connecting to the water supply
Inlet hoses
ImpORTANT!
●●
New hose sets provided with the washer should be
used to connect the washer to the water mains.
Old hose sets should not be re-used.
●●
●●
We recommend the inlet hoses are changed every
5 years. WaRNING: failure to do so may result in a
flood and damage to property.
Connect the straight ends of the inlet hoses to the taps
1
2
Straight
(tap) end
Elbow
(machine) end
and the elbow ends to the corresponding machine inlet
valves. The hot valve is colour coded orange to make
this easier. Make sure there are no kinks in the hoses.
Turn the taps on and check for leaks. Check for leaks
again after 24 hours.
Inlet hose ends
ImpORTANT!
The hot water temperature should not exceed 65°C and the cold water temperature
not exceed 35°C. Temperatures above these may cause the machine to fault or cause
damage to the machine.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTaLLaTION INSTRUCTIONS
If you have an uncontrolled water heating source (eg a wet back or solar heating
system) you should fit a Hot ‘N’ Safe Valve. This will ensure the hot water temperature
remains within safe limits.
Hot ‘N’ Safe Valves available are:
RMC TVA 50HF
RMC TVA 75HFS
Adjustable between 35°C – 55°C
RMC TVA 50HP
For instantaneous gas hot water supply
Water supply requirements:
Inlet water pressure: Maximum 1 MPa (150 psi), Minimum 30 kPa (4.5 psi)
Inlet water flow rate: Minimum 6 litres/minute
●●
●●
Cold supply only:
If you only have a cold water supply, the inlet valve cap (blanking cap) which came with
your washer must be connected to the hot inlet valve. The cap prevents water leaking
out of the hot valve. This appliance incorporates backflow protection complying with
AS3500.1. No further backflow protection is required for connection to the water supply.
Note: your washer has an internal heater to heat water. If you do not connect a hot
water inlet hose, your washer will automatically recognise there is no hot water supply
and its internal heater will heat the cold water to the required cycle temperature.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTaLLaTION INSTRUCTIONS
Draining
Drain hose placement in a stand pipe or tub
To guide the drain hose over the tub or
standpipe the hose guide must be fitted to
the drain hose. The height of the standpipe
or tub should be between 800 – 1200 mm.
Secure the hose guide so it cannot become
dislodged from the standpipe or tub.
1
Pull hose
through
guide
(20 mm)
maximum
2
ImpORTANT!
●●
If the drain hose is placed on the ground or
if the standpipe or tub is less than 800 mm
high, the washing machine will continuously
drain while being filled (siphon).
Regularly check that your standpipe or tub
is free from lint or other obstructions, which
may affect how your machine works or may
cause flooding.
●●
Fitting the drain hose guide
Attaching drain hose to spigot
Guide drain hose through hose guide
Secure hose guide to back wall of cupboard
using a screw. The height of the drain hose
should be between 500 – 800 mm from
ground level.
1
2
Height 500 – 800 mm
from ground
Attach drain hose to spigot and secure using
a hose clamp ensuring the blanking insert is
cleared from spigot.
3
Check for leaks.
4
●●
The drain hose should be checked from time
to time and replaced if any damage (eg wear,
cuts, bulges, kinks, leaks, etc) is found. Do
not bend the drain hose sharply, as this may
cause it to split.
●●
●●
In multi-storey apartments or any upper
floor, the machine should be installed on a
floor equipped with a drain.
Draining must comply with local by-laws.
Attaching drain hose to spigot
10
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTaLLaTION INSTRUCTIONS
Electrical connection
This appliance must be connected to a 220 V – 240 V, 50 Hz, sinusoidal, minimum 10 A
electrical supply.
Uncoil the power cord, remove and discard the plastic pin cover and plug into a
wall socket.
1
2
Connect the appliance to an earthed outlet protected by a fuse of suitable capacity.
3
●●
Check the power cord for damage and make sure it is not squashed or twisted when
installing the washer.
●●
●●
Always remove the power cord from a socket by the plug, not by the cord.
ImpORTANT!
If you are using an extension cord or a portable electrical outlet device
(eg multi-socket outlet box), ensure that it is positioned so that it does not come
into contact with water or moisture. faILURE TO DO SO May RESULT IN DEaTH OR
ELECTRICaL SHOCK.
●●
●●
Do not touch or operate the machine with wet hands or with bare-feet.
a damaged power cord must be replaced by a fisher & Paykel service technician, in
order to avoid a hazard. The appliance must not be operated until it is repaired, as
there is risk of electric shock.
Do not operate this machine if it has been damaged during transport. Contact your
fisher & Paykel dealer or fisher & Paykel service technician.
●●
SPaRE PaRTS
Available from your Fisher & Paykel dealer or a Fisher & Paykel service technician.
Hose Inlet Long (2 m)
Hose Inlet Large Bore
Drain Hose Extension
Part No. 422680P
Part No. 426123P
Part No. 425627P
11
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTaLLaTION INSTRUCTIONS
Completing the installation
Installation test cycle
ImpORTANT!
Do this before you wash any items in your washer. This is to check that your washer is
installed correctly and that it is functioning correctly prior to use.
Turn your washer on by pressing the
Select the ‘Quick’ cycle. Ensure the drum is empty and the door closed.
button.
1
2
3
Touch the
button. The machine will start to fill.
●●
Observe the machine for any problems (eg leaking from the hoses, excess noise or
vibrations).
●●
The washer will beep and display any faults on the screen if there are any problems.
Refer to pages 33 to 34.
Wait until you see water in the bottom of the drum.
4
5
6
Touch
to stop the cycle, then press
to turn the machine off.
Press
again, select the ‘Spin’ cycle and touch
.
●●
Check the drain hose is firmly secured to the standpipe or tub, or spigot.
Observe that the machine pumps out the water, and spins.
●●
ImpORTANT!
If there are any problems, you must address these before proceeding with normal use.
The washer will automatically turn off at the end of the cycle if there are no problems.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
BEfORE yOU DO yOUR fIRST WaSH
Before you start, it is a good idea to go through the following checklist:
Have the packaging and transit bolts been removed?
1
2
Is the drain hose threaded through the ‘U bend’ (with no more than 20 mm extended)
and hooked into your standpipe or tub, or attached to a spigot?
Is the hot hose connected to the hot valve (colour-coded orange)? Is the cold hose
connected to the cold valve (colour-coded white)? Have the taps been turned on?
Is the machine correctly levelled, feet are locked and cabinet corners clear of the floor
and walls?
3
4
5
Has the power cord been connected to an appropriate power supply and the power
turned on?
Have you performed the installation test cycle?
6
7
We recommend you complete your first cycle with a half-load amount of detergent
and without a load in order to remove any residues remaining in the machine from the
manufacturing process.
ImpORTANT!
you must ensure all 4 transit bolts have been removed from your washer before you
start using it. If the transit bolts are not removed, they will damage your washer and
yOUR MaNUfaCTURER’S WaRRaNTy WILL BE COMPROMISED.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STaRTED QUICKLy
WH7060P and WH8060P models
●●
Sort your washing carefully. Separate white/light
colours from dark colours. Wash new, highly
coloured and dark coloured items separately to
prevent dye transfer. Refer to the ‘Sorting and
loading’ section.
●●
●●
Load your clothes individually into the wash
drum. Close the door.
Place detergent in the correct compartment in
the detergent dispenser drawer (marked ‘2’). Use
Low Sudsing or ‘front Loader’ liquid or powder
detergents. Alternatively use detergent pods.
Place the pod at the back of the drum before
you load any clothing. For more information
on detergent refer to the ‘Detergent and fabric
softener’ section.
Detergent in
compartment marked ‘2’
●●
If you wish to use fabric softener, place it in
the compartment marked with a
. For more
information on fabric softener refer to the
‘Detergent and fabric softener’ section.
ImpORTANT!
fabric softener should not be used if you have
selected the ‘Quick’ or ‘Super Quick’ cycles.
Fabric softener in
compartment marked
WH7060P and WH8060P models
1
2
14
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STaRTED QUICKLy
Press
to activate your washer.
1
2
3
Select your wash cycle by turning the SmartTouch™ Control Dial.
Choose your wash options, if you wish to select options different from the default
options for the cycle.
Touch
to start the cycle.
4
●●
●●
If you make an invalid selection the washer will beep to alert you.
When the cycle finishes, your washer will perform end of cycle beeps and then turn
off automatically.
●●
If you wish to stop your washer at any point during a cycle simply touch
cycle. There may be a slight delay while the drum comes to a stop, then the door will
unlock. Under certain conditions however the door will remain locked for safety reasons
(refer to the ‘Safety features’ section).
to pause the
●●
If you wish to cancel or change the wash cycle once a cycle has started, simply touch
the
button then select the new cycle. Touch
to restart the washer.
ImpORTANT!
●●
●●
for the best fabric and colour care, remove your clothes as soon as the cycle has
finished.
failure to follow the advice in this guide may result in damage to your garments and
your expectations of wash performance may not be met.
3
4
15
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STaRTED QUICKLy
WH7060J and WH8060J models
●●
Sort your washing carefully. Separate white/light
colours from dark colours. Wash new, highly coloured
and dark coloured items separately to prevent dye
transfer. Refer to the ‘Sorting and loading’ section.
Load your clothes individually into the wash drum.
Close the door.
●●
●●
Place detergent in the correct compartment in
the detergent dispenser drawer (marked ‘2’). Use
Low Sudsing or ‘front Loader’ liquid or powder
detergents. Alternatively use detergent pods. Place
the pod at the back of the drum before you load in
any clothing. For more information on detergent refer
to the ‘Detergent and fabric softener’ section.
Place fabric softener in the compartment marked
Detergent in
compartment marked ‘2’
●●
with a
. For more information on fabric softener
refer to the ‘Detergent and fabric softener’ section.
ImpORTANT!
fabric softener must not be used if you have
selected the ‘Quick’ cycle.
Fabric softener in
compartment marked
WH7060J and WH8060J models
1
2
16
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STaRTED QUICKLy
Press
to activate your washer.
1
2
3
Select your wash cycle by turning the SmartTouch™ Control Dial.
Choose your wash options, if you wish to select options different from the default
options for the cycle.
Touch
to start the cycle.
4
●●
●●
If you make an invalid selection the washer will beep at you.
When the cycle finishes, your washer will perform end of cycle beeps to alert you and
then turn off automatically.
●●
If you wish to stop your washer at any point during a cycle, simply touch
to pause
the cycle. There may be a slight delay while the drum comes to a stop, then the door
will unlock. Under certain conditions however the door will remain locked for safety
reasons (refer to the ‘Safety features’ section).
●●
If you wish to cancel or change the wash cycle once a cycle has started, simply touch
the
button then select the new cycle. Touch
to restart the washer.
ImpORTANT!
●●
●●
for the best fabric and colour care, remove your clothes as soon as the cycle has
finished.
failure to follow the advice in this guide may result in damage to your garments and
your expectations of wash performance may not be met.
3
4
17
Download from Www.Somanuals.com. All Manuals Search And Download.
WaSHER CONTROLS
SmartTouch™ Control Dial
The SmartTouch™ Control Dial provides easy and efficient
wash cycle selection. As you rotate the dial, the icon of the
wash cycle selected will be illuminated, along with the default
settings for that cycle on the right side of the control panel.
SmartTouch™ Control Dial
SmartTouch™ buttons
The smooth, easy clean buttons enable easy selection of
options with lights clearly showing the selections you are
making.
Digital display screen
SmartTouch™ buttons
The digital display screen provides feedback on how long the
wash cycle has to go. If you have programmed a ‘Delay Start’,
the time remaining until the cycle will start will be displayed
here, along with any messages to help you with the overall
running of your washer (eg user warnings).
Time to go
Your washer displays approximately how many minutes the
cycle you are running has remaining, so that you can tell at a
glance when your washing will be finished.
Digital display screen
Please be aware that a number of factors can influence the
overall cycle time, eg the water flow rate, water pressure,
whether hot water is being used from the tap or the water
is heated by the internal heater, load size, cycle and option
selections. Therefore cycle times will vary. Unexpected factors
in a wash cycle (eg out of balance, oversudsing) can lengthen
the cycle time. The time remaining is constantly updated
taking these factors into account, which may mean the time
displayed for the cycle becomes longer than was initially
estimated.
Time to go
Progress lights
The progress lights indicate what part of the cycle the washer
is currently on (wash, rinse or spin). All three lights are on at
the beginning of the cycle. The light for the current part of the
cycle flashes, and each one goes out when that part of the
cycle is complete.
Progress lights
Keylock mode
Keylock can be used to lock the buttons on your washer. This
will avoid accidental button pushes. For more detail please
refer to the ‘Wash cycle options’ section.
Keylock mode
18
Download from Www.Somanuals.com. All Manuals Search And Download.
SafETy fEaTURES
Door lock
The door of your washer is locked once you touch
until the machine beeps at
the end of the cycle, ensuring safety for you and your family while your machine is
operating.
To unlock the door during the cycle
You can open the door to add or remove items during the wash simply by touching
●●
the
button. Note: the door will remain locked if the temperature inside the washer is
above 60°C and/or the water level is above the bottom of the door seal (a warning will
be displayed in these circumstances, refer to ‘Before you call for service’).
●●
Simply touch
conditions inside the washer are safe. The
screen while the washer is paused. Open the door and remove or add garments. Close
the door and touch to resume the cycle.
, the machine will pause and the door will automatically unlock if the
button and time to go will flash on the
Add a Garment (WH7060P, WH8060P models only)
The ‘Add a Garment’ function can be used to interrupt the cycle to add or remove a
garment at anytime during the wash (as long as the wash temperature selected for the
cycle is lower than 60°C). Water in the machine will be drained to a level where the door
can be opened, if necessary. Refer to ‘Wash cycle options’ for more information.
Opening the door during a power failure
If there is a power failure during a wash cycle your
washer will stop and the door will remain locked. You
can unlock the washer door to remove your clothes
by opening the pump filter cover at the bottom right
of your washer. Simply place a coin or key in the slot
and tilt it upwards to lever the cover open, then pull
the door release tab.
ImpORTANT!
Do not attempt to do this if the water level in the
Door release tab
washer is above the level of the door.
Manual door opening mechanism
When power is restored you will need to restart
your machine by simply pressing
. The washer will
remember where in the cycle it was up to.
Your washer also has the following protective measures:
●●
●●
Flood protection – turns off valves and turns pump on if a flood condition is detected.
Out-of-balance protection – stops and redistributes the load if an unbalanced load
condition is sensed, and/or slows the spin speed to compensate.
Excess suds protection – pauses to allow suds to break down before continuing the
cycle.
●●
19
Download from Www.Somanuals.com. All Manuals Search And Download.
SORTING aND LOaDING
When preparing your wash load there are some important things to consider:
Sorting
Sort items according to colour, fabric type, and soil type. Wash fine, delicate fabrics
separately from thick, heavy fabrics. Always separate coloured items from whites,
especially when they are new. Colour run could be an issue if you wash items at higher
temperatures. Some soils, like mud and blood are best washed in cold water. Oily
soils (eg some foods and marks on shirt collars) are best washed in warm water. The
following are recommendations for what cycles and settings you may wish to wash
different items on, and suggestions for special wash requirements.
ITEMS/WaSH
REQUIREMENTS
SUGGESTED CyCLE
aND OPTIONS
SUGGESTED
TEMPERaTURE
Towels
Everyday, 1100 or 1200 rpm spin*
Everyday, 1100 or 1200 rpm spin*
Bulky**
30°C or 40°C
30°C or 40°C
30°C or 40°C
Sheets, pillowcases
Bulky items – doonas, duvets,
sleeping bags
Shirts, pants, other creasables
Woollens, silks
Easy Iron, 800 rpm
Handwash**, 500 rpm
Delicate or Handwash**
Everyday or Heavy
30°C or 40°C
30°C
Delicates, fine fabrics
Jeans
30°C
30°C or 40°C
Cold or 30°C
40°C or 60°C
40°C
Highly coloured items
Whites, cotton items
Everyday
Cottons, 1400 or 1200 rpm spin*
Have sensitive skin or require
extra rinsing?
Allergy**, Rinse+, 1100 or
1200 rpm spin*
Asthma/allergies
Allergy**, Rinse+
Quick
60°C
30°C
Cold
90°C
Lightly soiled items
Muddy, sandy or linty items
Smelly washer
Everyday, Pre Wash and Rinse+
Drum Clean
*ꢀSpin speed available depends on model.
**ꢀWash cycle available on WH7060P and WH8060P models only.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
SORTING aND LOaDING
Before you load
●●
●●
Check pockets for items that could damage your clothes or get caught in the washer.
Close zippers, hooks and eyes, and other fastenings (ie fasten the opening of duvet/doona
covers), and remove loose bra wires. All these can damage both your washer and your
clothes.
Place delicate items, such as lingerie, in a mesh laundry bag before placing in the machine.
Pre-treat any stains, taking care not to spray pre-treaters on your washer as they can
cause damage to the plastic surfaces.
●●
●●
Loading
Your washer will be more efficient when washing larger loads, so try to collect enough
items to loosely fill the drum when the items are dry.
ImpORTANT!
●●
●●
●●
Do not overload your washing machine beyond its rated capacity.
Please do not under any circumstances wash an electric blanket in your washer.
Do not wash curtains in this washer, as sunlight makes them brittle and they may
disintegrate during washing.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
DETERGENT aND faBRIC SOfTENER
Detergent type
Your washer requires low sudsing detergent to prevent oversudsing problems. Low
sudsing detergent comes in powder, liquid or pod form and is labelled ‘Front Loading’,
‘Low Suds’, ‘High Efficiency’ or ‘HE’.
Using top loading detergent in your front loader washer may lead to excessive suds
formation, which will lengthen the cycle time as the machine waits for the suds to
dissolve.
Where do I put my detergent?
Powdered or liquid detergent is added to the main wash detergent compartment on
the left side of the dispensing drawer marked with a ‘2’. As the machine fills, water is
flushed through this compartment to deliver a detergent solution into the drum.
Pods – Detergent pods are a ‘no mess’ alternative to powdered or liquid detergent.
They must be placed at the back of the drum prior to loading your clothes. This will
ensure they are activated quickly in the wash. Do not place pods in the detergent
dispenser drawer.
If you wish to use the ‘Pre Wash’ option, liquid or powdered detergent only must be
placed in the pre wash detergent compartment on the right side of the drawer, marked
with a ‘1’. When you select ‘Pre Wash’, the pre wash compartment is flushed at the start
of the cycle.
Detergent in the pre wash
compartment marked ‘1’
‘Pre Wash’ option
ImpORTANT!
●●
If you select the ‘Pre Wash’ you cannot use liquid detergent in the main wash
detergent compartment. you must use powdered detergent for the main wash.
Make sure the detergent dispenser draw is completely closed before starting the cycle.
If using ‘Delay Start’ we recommend you use powdered detergent for the main wash.
●●
●●
22
Download from Www.Somanuals.com. All Manuals Search And Download.
DETERGENT aND faBRIC SOfTENER
How much detergent?
The correct detergent dosage varies depending on the amount of soil in your load, the
size of the load and the water quality, so getting the correct dose takes some trial and
error. Use the instructions stated on the detergent package as a guide, then alter the
dosage according to the results.
If you overdose, you will get over foaming issues, but if you under-dose you will get poor
performance and over time your washer will start to smell as scum builds up inside it.
Detergent advice
If your washer smells you are probably not using enough detergent for the soil level
in your loads. Run a ‘Drum Clean’ cycle and either buy a better quality detergent or
use a higher dose. If you are using an ‘Eco’ detergent, alternate the use of this with a
mainstream detergent.
1
Add the detergent BEFORE starting the cycle, close the dispenser and do not open it
while the cycle is running.
If you find foam leaking from your washer, check you are using a low sudsing or front
loader type detergent and check the quantity you are using against the detergent
manufacturers recommendation. You may need to reduce the amount you are using.
2
3
fabric softener
Fabric softener is added to the middle compartment of the dispenser marked with a
The washer will automatically flush the softener during the rinse.
.
If you wish to use fabric softener we recommend to:
Use it sparingly. Measure it carefully and do not use more than 25 mls (1 cap) (some
thicker varieties may need diluting).
1
Clean your dispenser regularly.
2
3
4
Clean your machine regularly using the ‘Drum Clean’ cycle.
Complete wash cycles at a wash temperature of 40°C or above at regular intervals
(eg every 5th wash) as washing in cold water increases the chance of scrud occurring
(see below).
Note: if you fill beyond the MAX mark, the fabric softener will be dispensed into the
bowl prematurely and contribute to scrud.
Scrud
Scrud is the name of the waxy build-up that can occur within any washer when fabric
softener comes in contact with detergent. This build-up is not brought about by a fault
in the machine. If scrud is allowed to build up in the machine it can result in stains on
clothes and an unpleasant smell in your washer.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
WaSH CyCLES
WH7060P and WH8060P models
Your washer has a number of wash cycles to suit your laundering needs. Selecting the
most appropriate cycle for each particular wash load will help ensure you get the best
wash result.
Max.
LOaD
SIzE
DEfaULT
WaSH
TEMP.
(°C)
Max.
WaSH
TEMP.
(°C)
DEfaULT
SPIN
SPEED
(rpm)*
Max.
SPIN
SPEED
(rpm)*
CyCLE
DESIGNED fOR
DESCRIPTION
(kg)*
Cottons**
Normally soiled
everyday cotton loads,
eg whites.
A comprehensive cycle
specifically designed for
cottons.
7 or 8
7 or 8
40
90
1400
1400
Everyday
Normally or lightly
soiled everyday items
eg towels, sheets,
sweatshirts, t-shirts.
A faster cycle designed
for mixed loads with
normal soiling.
40
90
1400
1400
Heavy
Heavy soiled durable
garments eg tea towels,
rugby shorts.
A stronger, hotter wash
for more durable items.
7 or 8
4
60
40
90
60
1400
500
1400
800
Delicate
Easy Iron
Delicate, lightly soiled
items, eg tops, blouses.
Gentler wash with more
water to look after
delicate items.
Minimising creasing eg
shirts, trousers.
Less spinning with
‘Wrinkle Free’ option to
help minimise the need
for ironing.
4
4
40
60
60
60
90
90
800
800
1400
800
800
1400
Bulky
Washing bulky items.
A warm, gentle wash
and slow spin for special
care of bulky items.
Allergy
Asthma sufferers
and people with skin
sensitivities.
Hot wash to kill dust
mites and extra rinses
to remove all traces of
detergent.
7 or 8
Handwash
Quick
Very delicate lightly
soiled garments, eg
woollens.
Very gentle wash action
for extra special items.
2
4
2
30
40
40
40
40
60
500
800
800
500
1100
1400
Lightly soiled garments.
A quick cycle for lightly
soiled loads.
Super
Quick
Freshening up small
musty or lightly soiled
items.
A quick cycle for small
lightly soiled loads.
Rinse
Items that require
rinsing only.
Two rinses followed by
a spin.
7 or 8
7 or 8
Cold
N/A
Cold
N/A
1400
1400
1400
1400
Spin
Spinning wet items.
Spin only.
Drum
Clean
Maintaining the
cleanliness of your
washer.
A hot cycle to remove
any residues inside the
washer.
–
90
90
1400
1400
* Depends on your model of washer (7.0 kg or 8.0 kg capacity).
** Cottons 40°C and 60°C, with Normal Soil, Eco and 1400 rpm are the standards energy testing and labelling
cycles in accordance with EN 60456 and EU directive 2010/30/EU. These are the standard cotton programmes
for normally soiled cotton laundry. They are the most efficient programmes in terms of combined energy and
water consumption for cotton laundry. The water temperature may differ from declared cycle temperature.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
WaSH CyCLES
WH7060J and WH8060J models
Your washer has a number of wash cycles to suit your laundering needs. Selecting the
most appropriate cycle for each particular wash load will help ensure you get the best
wash result.
Max.
LOaD
SIzE
DEfaULT
WaSH
TEMP.
(°C)
Max.
WaSH
TEMP.
(°C)
DEfaULT
SPIN
SPEED
(rpm)
Max.
SPIN
SPEED
(rpm)
CyCLE
DESIGNED fOR
DESCRIPTION
(kg)*
Cottons**
Normally soiled everyday
cotton loads, eg whites.
A comprehensive cycle
specifically designed for
cottons.
7 or 8
7 or 8
40
90
1200
1200
Everyday
Normally or lightly
soiled everyday items
eg towels, sheets,
sweatshirts, t-shirts.
A faster cycle designed
for mixed loads with
normal soiling.
40
90
1200
1200
Heavy
Heavy soiled durable
garments eg tea towels,
rugby shorts.
A stronger, hotter wash
for difficult stains on
durables.
7 or 8
4
60
40
90
60
1200
500
1200
800
Delicate
Easy Iron
Delicate, lightly soiled
items, eg tops, blouses.
Gentler wash with more
water to look after
delicate items.
Minimising creasing eg
shirts, trousers.
Less spinning with
‘Wrinkle Free’ option to
help minimise the need
for ironing.
4
4
40
40
60
40
800
800
800
1100
Quick
Rinse
Spin
Lightly soiled garments.
A quick cycle for lightly
soiled loads.
Items that require rinsing
only.
Two rinses followed by
a spin.
7 or 8
7 or 8
Cold
N/A
Cold
N/A
1200
1200
1200
1200
Spinning out wet items.
Spin only.
Drum
Clean
Maintaining the
cleanliness of your
washer.
A hot cycle to remove
any residues inside the
washer.
–
90
90
1200
1200
* Depends on your model of washer (7.0 kg or 8.0 kg capacity).
** Cottons 40°C and 60°C, Eco and 1200 rpm are the standards energy testing and labelling cycles in accordance
with EN 60456 and EU directive 2010/30/EU. These are the standard cotton programmes for normally soiled
cotton laundry. They are the most efficient programmes in terms of combined energy and water consumption
for cotton laundry. The water temperature may differ from declared cycle temperature.
If you wash a particularly dirty load, we recommend putting the washer through a
‘Rinse’ cycle once the cycle has finished and the load has been removed, to clean out
any remnants from that cycle and to prevent contamination of the next loads that are
washed.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
WaSH CyCLE OPTIONS
All wash cycles default to the recommended options for that cycle based on the average
expected load to be washed. You can vary the options (eg ‘Wash Temp’, ‘Spin Speed’)
to create your desired cycle. Note: some options are not available on some cycles, for
clothes care reasons, or because the option is not appropriate for the cycle.
To change a wash option or options you have selected after a cycle has started, touch
and select your new setting, then touch
again to resume the cycle with the new
setting or settings. Note: some options may not be available for selection under certain
conditions and after particular stages of the cycle have passed.
Wash Temp
Your washer offers five wash temperatures:
Cold
30°C
40°C
60°C
90°C
●●
●●
Simply touch the ‘Wash Temp’ button to increase or decrease the wash temperature.
The washer will fill with both hot and cold water to achieve the selected wash
temperature. If required the washer will heat the water to the selected temperature.
Some temperatures are not available on some cycles as a safeguard for your clothes
(eg 60°C and 90°C on the ‘Handwash’ cycle).
●●
ImpORTANT!
When 90°C temperature is selected, the door glass will become hot. Do not touch the
glass part of the door. Keep children away from the washer.
Spin Speed
●●
●●
Your WH7060P or WH8060P model of washer offers four spin speeds: 500 rpm,
800 rpm, 1100 rpm and 1400 rpm, plus an additional ‘No Spin’ option.
Your WH7060J or WH8060J model of washer offers three spin speeds: 500 rpm,
800 rpm, 1200 rpm, plus an additional ‘No Spin’ option.
Simply increase or decrease the spin speed by touching the ‘Spin Speed’ button.
Selecting ‘No Spin’ will end the cycle after the rinse, allowing you to remove items you
wish to drip dry. Note: the washer will complete the default wash and rinse spins for
the cycle; only the final spin will not be completed. If you have removed the items you
wish to drip dry and there are items remaining that you would like to proceed to spin,
●●
●●
press
and select the ‘Spin’ cycle. If necessary, modify the spin speed to best care for
your load (ie spin delicate items at 500 rpm for best garment care).
Soil Level (WH7060P and WH8060P models only)
The ‘Soil Level’ option lets you adjust the wash to suit the amount of soil in your load.
For example, select ‘Heavy’ for dirty clothes; for items that are only lightly soiled, select
‘Light’. This adjusts the wash time accordingly to give the load the right amount of
agitation to remove the soil.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
WaSH CyCLE OPTIONS
Wash Boost
Pre Wash
For extra dirty loads you can perform a ‘Pre Wash’. Your washer will start the wash with
a short wash in cool water to remove excess soil. After this the machine will drain and
then fill at the selected temperature for the main wash.
If you use the ‘Pre Wash’ option, liquid or powdered detergent needs to be placed
in the correct detergent compartment. The pre wash compartment is on the right
hand side of the drawer, marked ‘1’. When you select ‘Pre Wash’, the compartment is
flushed at the start of the cycle. The detergent for the main wash must be a powder,
and should be placed in the compartment marked ‘2’.
Simply touch the ‘Wash Boost’ button and select ‘Pre Wash’ when choosing your wash
options. Note: ‘Pre Wash’ cannot be selected after a wash cycle has been started, ie
if you touch
and try to select ‘Pre Wash’ it will be unavailable. ‘Pre Wash’ must be
selected at the start of the cycle.
Rinse+
If you have a particularly dirty load, or you have sensitive skin and wish to give your
clothes an extra rinse, select ‘Rinse+’ from the ‘Wash Boost’ options. Your load will
undergo an extra rinse to get rid of any residual detergent or soil in the items.
Note: ‘Rinse+’ will not be available if the ‘Eco’ option has been selected.
Options
Wrinkle Free (WH7060P and WH8060P models only)
We recommend you remove the clothes from the washer immediately after the
completion of the cycle to minimise wrinkling and creasing of items and to prevent
dye run. However, if you will not be present at the end of the wash you can select
‘Wrinkle Free’.
When ‘Wrinkle Free’ is selected, the washer will tumble the clothes once every
15 minutes for up to 12 hours after the cycle has finished. The ‘Wrinkle Free’ light and
button will flash, and the washer will beep at regular intervals to remind you to
remove your load. To remove the load during this phase, simply press the
button.
Eco
Use the ‘Eco’ option to save water and energy. Selecting ‘Eco’ will reduce the wash
temperature slightly and alter the wash time.
Note: this option will not be available if ‘Pre Wash’ has been selected.
●●
If you wish to, you can select both the ‘Pre Wash’ and ‘Rinse+’ ‘Wash Boost’ options
to perform on the same cycle. Likewise, you can select ‘Eco’ and ‘Wrinkle free’ to
perform on the same cycle. Touch the appropriate button until both options are
selected. Repeat to deselect an option.
for clothes care and performance reasons not all options may be available on some
cycles.
●●
27
Download from Www.Somanuals.com. All Manuals Search And Download.
WaSH CyCLE OPTIONS
add a Garment (WH7060P and WH8060P models only)
The ‘Add a Garment’ option enables you to add or remove items during the wash stage
of the cycle, under certain conditions. Once the ‘Add a Garment’ button is touched, the
button and time to go will flash. Wait until you hear the door unlock. Open the door
and add or remove items. Close the door and touch
to restart the cycle. The ‘Add
a Garment’ button will only operate during the wash part of the cycle and when the
temperature selected is lower than 60°C. ‘Add a Garment’ can be used when the total
wash volume has been reached, as your washer will drain the water to a lower level if
necessary, so the door can be opened.
Keylock
This option enables you to deactivate the buttons on the display panel, except for the
‘Power’ and ‘Keylock’ buttons. This prevents accidental button presses.
To turn Keylock mode ON or OFF when the washer is powered on:
Touch and hold the button for 2 seconds.
●●
Note: when activated, the light above the button is illuminated.
If Keylock mode is activated and the machine is powered off:
●●
●●
To turn your washer on, press the
two seconds. Select your wash cycle, options and then touch
button, then touch and hold the button for
to start the cycle.
To turn the washer off at anytime when keylock is activated simply press the
button.
Delay Start
The ‘Delay Start’ option enables you to delay the start of the wash cycle from between
5 minutes and 12 hours. Times you can select are 5 min, 15 min, 30 min, 1 hour, then
hourly up to 12 hours. This can be useful to time your washing to finish when you arrive
home from work, or to start once you have finished in the shower. Some stain removers
also require you to spray them on then leave for several minutes, before washing.
Your washer will wait for the selected time then start without you having to wait or
remember to start your machine.
To programme a ‘Delay Start’ time, simply touch the ‘More’
button to increase the
delay time and ‘Less’ button to decrease the time or turn ‘Delay Start’ off. Touch
to confirm your selection and start the countdown. Once started, the time will count
down on the digital display screen in 1 minute increments, the ‘Delay Start’ light will
flash and the
light will stop flashing and turn on solid.
Note: if you hold the ‘More’
button down, the time displayed on the screen will increase
after every half a second (more convenient than touching the button repetitively).
To remove a ‘Delay Start’ time once it is counting down, simply touch
, then touch the
‘Less’ button to decrease the time to zero. Touch to start the cycle immediately.
Note: we suggest that you avoid using ‘Delay Start’ for damp, non-colourfast items as
this may cause dye run to occur. We also recommend you use powder detergent when
you use the ‘Delay Start’ function.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMISING WaSH CyCLES
After using your washer a few times you may discover there are some wash options you
prefer for some cycles.
You can programme your washer to remember the wash options you prefer for each
wash cycle. For instance, you may want to set the ‘Easy Iron’ cycle to cold wash
temperature or set the ‘Everyday’ cycle so it gives you Rinse+ every cycle.
To customise a cycle:
Press
to turn the machine on.
1
2
3
Turn the dial to select the cycle you wish to customise.
Touch and hold any of the wash option buttons for 3 seconds. The cycle icon will flash
on and off to indicate that the product is in cycle adjustment mode. The display will
show
.
Select the wash options you prefer by touching the relevant option button.
Touch to save the selected settings.
4
5
Your washer will automatically remember your changes for all future washes you do on
this cycle.
factory Reset
You can reset your washer to the default settings it left the factory with:
Turn the dial to select ‘Spin’.
1
2
Touch and hold the ‘Delay Start’ ‘More’ , the ‘Delay Start’ ‘Less’
buttons together for 3 seconds.
and ‘Options’
Your washer will now be reset to the default settings.
3
29
Download from Www.Somanuals.com. All Manuals Search And Download.
CaRING fOR yOUR WaSHER
When you have finished using your washer
●●
●●
Unplug the machine from the power socket.
Wipe around the door and in the rubber gasket to remove any remaining water and
foreign matter.
●●
Turn off the taps to prevent the chance of flooding should a hose burst.
Cleaning your washer
Before you start cleaning your washer, ensure that it is disconnected from the power
(ie unplug the machine from the power socket).
Cleaning the control panel and outer surfaces of the washer
Use a soft damp cloth to wipe all surfaces, then wipe dry. Avoid using chemical or
scouring cleaners, as these will damage the paint and plastic surfaces of your washer.
Cleaning the detergent dispenser drawer
Wipe out the detergent dispenser drawer with a damp cloth. Clean it regularly,
especially if you use fabric softener. To remove the drawer, pull it open, push down on
the blue tab in the fabric softener compartment (labelled ‘PUSH’) and pull out. Rinse it
out under warm water and replace.
Cleaning the inside of your washer
It is important that you regularly clean the inside of your machine using the ‘Drum
Clean’ cycle. After 100 cycles your washer will flash the
icon every time you turn your
washer on to remind you to do this. If your washer starts to smell this is a sign that you
should complete a ‘Drum Clean’ cycle. We recommend that you do not have any items
in the washer when you run this cycle.
Cleaning steps
Add approximately 2 full scoops of a good quality powdered
detergent directly into the main wash detergent compartment
of the dispenser drawer (marked ‘2’) or use a drum cleaning
product specifically designed for front loading washing
machines (follow manufacturer’s instructions).
1
Press
cycle.
Touch
to turn your machine on and select the ‘Drum Clean’
2
3
‘Drum Clean’ cycle
to start the cycle (refer to the ‘Wash cycles’ section).
Cleaning the drum and the door
●●
●●
Use a soft damp cloth to wipe the door, cleaning any water marks or residue off it.
Wipe the rubber ring around the door. Remove any items or lint accumulating in the
bottom of the ring catchment and wipe out any water accumulated here. If this is not
cleaned out, unpleasant odours will develop.
If the drum has any residual dirt or lint stuck to it, remove this and wipe the drum clean.
Do not leave any metal objects in the drum as these may rust and cause staining.
●●
Do not allow children to swing on or place any weight on the door when open as this
may cause damage.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
CaRING fOR yOUR WaSHER
Cleaning the pump filter
The pump has a filter to trap foreign objects that enter the
washer along with clothing. The pump filter can be accessed
from the front of the washer.
To clean the filter:
This should be cleaned out approximately once a month.
Drain residual water
Turn the power off and unplug the machine.
1
2
Use a coin to open the filter cover. Place the edge of the coin
into the slot and tilt upwards whilst levering the cover open.
Unhook the pump outlet hose and pull it out (about 150 mm).
Remove the plug and allow any water (approximately
250 mls) to drain into a shallow dish.
3
After the draining process is complete, replace the plug into
the hose and refit the hose back into the housing.
Remove the filter by turning anti-clockwise. Clean and rinse
under a tap.
Replace the filter by turning clockwise until the white mark on
the filter is in line with the white line on the pump housing.
4
5
6
Replacing filter
white marks are in line
white marks are not in line
Correct
Incorrect
White mark on filter must be in line with white line on pump housing
Close the filter cover.
7
31
Download from Www.Somanuals.com. All Manuals Search And Download.
CaRING fOR yOUR WaSHER
Cleaning the hoses
Each hose has a filter in it, preventing any solid contaminants in the water entering your
washing machine. Occasionally you should unscrew the water inlet hoses where they
connect to the taps, check these for any build up of dirt and wash this out.
Nappy sanitisers/bleach
Nappy sanitisers and bleach are very corrosive to metal surfaces. DO NOT tip the
contents of a nappy bucket into your machine. Rinse and wring items out thoroughly
before placing them in the machine.
Moving your washer
If you need to move your washer a considerable distance (eg moving house), remember
to replace the transit bolts before moving it. These will protect internal components of
the washer from damage.
To replace the transit bolts, pull out the bolt-hole covers in the back of the machine.
Push the transit bolt rubber grommets and plastic spaces into the hole left and tighten
it with the spanner provided with the product.
Make sure any water in the washer is drained out. This can be done by cleaning out the
pump filter (refer to ‘Caring for your washer’ section ‘Cleaning the pump filter’).
ImpORTANT!
Leave the door to your washer open when it is not in use to allow the washer to dry
out, otherwise it will develop unpleasant odours. When leaving the door open like
this, it is extremely important that children and pets are kept away from the washer so
they cannot be accidentally trapped inside it.
aside from the detergent dispenser, water hoses, and the pump filter, no other parts
are designed to be removed from the machine for cleaning. Do not attempt to remove
any other part of the machine.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
BEfORE yOU CaLL fOR SERVICE
User warnings
Your washer is capable of diagnosing a number of its own problems. It will sound a
continuous series of beeps and display a code when it has a problem that you can
correct yourself. All control panel lights will turn off and the code will be displayed to
inform you what the problem is. To stop the beeps, press any button on the control
panel. Do not try to continue washing once you stop the noise. You must address the
problem the washer is alerting you to.
Check this chart before you call for service.
PROBLEM
DISPLayED aS
WHaT TO DO
Water is not
getting to the
machine.
Check the taps have been turned on.
If there is no hot water connection the machine will
heat the water itself, but there must be a cold water
connection to the cold valve.
Check the hose connections. If the cold water
supply is connected to the hot valve and there is no
connection to the cold valve the machine will not fill.
Check the inlet hose filters are not blocked, the hoses
are not kinked and are attached correctly.
Check that the drain hose is not too low or pushed
into the standpipe too far. This will cause the water to
siphon out of the machine.
Check the cold water temperature does not exceed
the 35°C temperature requirement.
Check the water flow rate. It maybe too low.
Wash load
is out of
balance.
Touch
to try the spin again.
If the out of balance persists, pause the cycle,
manually redistribute the load and touch
to spin
again. If necessary, stop the cycle, select ‘Spin’ and
touch
.
If the problem persists, check the machine is correctly
levelled.
Too many
suds.
Machine will stop and flash
for 10 minutes
while waiting for suds to dissipate. The machine
will not beep during this time. After 10 minutes the
machine will automatically restart. At any point during
that 10 minutes you can touch
to restart the
machine, but it is recommended that the machine be
left to restart automatically.
Check you are using a suitable detergent.
Check you are not overdosing the detergent.
Check the standpipe height for the drain does not
exceed 1200 mm.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
BEfORE yOU CaLL fOR SERVICE
PROBLEM
DISPLayED aS
WHaT TO DO
Door is
locked.
The temperature in the drum is over 60°C therefore
it is not safe to open the door. Wait until the
temperature drops below 60°C.
Check the water level in the drum. If the level is above
the bottom of the door seal, the door cannot be
opened. Use the ‘Add a Garment’ button if you wish
to add or remove items (WH7060P and WH8060P
models only).
If the drum is still moving, wait for it to stop before
attempting to open the door.
Door is open.
Close the door fully and touch
.
Try opening and closing the door again.
Reposition the load, make sure the load is correctly in
the drum and that protruding items are not stopping
the door from closing.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
faULT CODES
When a continuous series of beeps is sounded, all the lights turn off on the control
panel and a number appears on the display, a fault has occurred. The washer will
automatically enter this mode if a fault occurs. The fault code will be displayed as
followed by a number on the digital display. To stop the sound, touch any button and
perform the following steps:
Turn your machine off at the power point.
Wait 1 minute and turn it back on.
Check your machine is correctly levelled (refer to page 8).
Remove your wash load.
Perform a ‘Rinse’ cycle.
1
2
3
4
5
6
7
If the fault re-occurs repeat steps 1 and 2.
If the machine still will not work you will be required to call a Fisher & Paykel service
technician to arrange service (refer to the ‘Customer Care’ section). Record the fault
code number displayed and the serial number of your washer (located on the rear of
the machine, and/or above the drum opening when the door is open) before calling. The
fault code will indicate to the Repairer what the problem could potentially be.
If a fault code is being displayed, you can still turn your washer off by pressing
.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
The following is a list of problems you may encounter when using this appliance and
some suggestions that may help to correct the problem. If you still have problems,
please contact your Fisher & Paykel service technician.
Solving operating problems
PROBLEM
POSSIBLE CaUSES
WHaT TO DO
Power not switched on at
the wall.
Check power is switched on at the
wall.
Pressing
does not turn on
machine.
Household power supply
fault.
Turn off power at power point.
Unplug washer. Wait 60 seconds,
plug back in, switch power on and
try again.
Washer door not closed
properly.
Open and reclose door.
Touching
not start the fill.
does
The washer is waiting for a
command from you.
If
is flashing then the washer is
waiting for a command from you.
The washer has detected a
fault.
Check if a code is being displayed
on the panel. (Refer to pages
33 – 34).
Hot and cold taps not
turned on.
Check that both hot and cold
taps are turned on (if using cold
inlet only ensure inlet valve cap is
installed on the hot valve on the
machine).
Hot and cold taps
not connected to the
corresponding valve on the
machine.
Check the cold tap is connected to
the cold valve on the machine and
the hot tap is connected to the hot
valve.
Blocked hose filters.
Check the tap end of the inlet hoses
for blockages.
Inlet hose leaking, twisted
or damaged.
Check the inlet hose for leaks or
damage. Check that the inlet hose is
not twisted.
Faulty water supply.
Check taps that aren’t connected to
the machine are working.
Delay start maybe set.
Refer to page 28.
Washer stops
working mid
cycle.
The washer has detected a
fault.
Refer to pages 33 – 34.
Power or water failure.
Check the power and/or water is
working correctly.
Washer has been paused.
Too many suds.
Touch the
button to continue.
Washer is waiting for suds to
dissolve before continuing the cycle.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Solving operating problems
PROBLEM POSSIBLE CaUSES
WHaT TO DO
Washer drains
while filling.
Drain hose too low.
Ensure the height of the drain hose is
at least 800 mm from the floor level
(refer to page 10).
Drain hose sitting in water.
Drain hose blocked.
Clear the drain.
Washer is not
draining.
Clear the drain hose.
Pump filter blocked.
Clear the pump filter (refer to page 31).
Drain hose higher than
1200 mm above floor level.
Lower the level of the drain hose (refer
to page 10).
Filling
continuously.
Drain hose not connected
to standpipe or tub.
Connect drain hose correctly (refer to
page 10).
Machine siphoning.
Ensure standpipe or tub is at least 800
mm from the floor level.
Poor rinsing.
Incorrect detergent used.
Too much detergent used.
Use low sudsing, front loader
detergent only (refer to page 22).
Ensure the correct dose of detergent
is used for the load size and soil level
(refer to page 23).
Not spinning
properly.
Load has gone out of
balance.
Open door and redistribute load, then
restart the washer.
Machine is not level.
Ensure machine is correctly levelled
(refer to page 8).
Suds build up.
Check the amount of detergent used,
reduce if necessary.
Too many soap
suds.
Incorrect type of
detergent used.
Use low sudsing, front loader
detergent only (refer to page 22).
Too much detergent used.
Ensure the correct dose of detergent
is used for the load size and soil level
(refer to page 23).
Small puddle of
water from under
the machine.
Inlet hose or drain hose
leaking.
Check inlet hoses and the drain hose are
correctly attached and not damaged.
Lots of suds.
Suds may have leaked and then
dissolved.
Detergent dispenser
blocked.
Clean detergent dispenser drawer
(refer to page 30).
Detergent dispenser
drawer not fully closed.
Close detergent dispenser drawer fully
and ensure it remains closed during
the cycle.
Damage to door seal.
Check seal inside door for damage. If it
sustains any damage it will need to be
replaced.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Solving operating problems
PROBLEM POSSIBLE CaUSES
WHaT TO DO
Cycle time
longer than
Wash time is approximate.
Wash time may be influenced by a
number of factors (refer to page 18).
usual/Inaccurate
time reading/
Adjustment of
time remaining
during cycle.
Low water pressure or
flow rate.
Ensure that inlet hose filters are not
blocked.
Out of balance or
oversudsing.
Recovery from out of balance or
oversudsing will extend cycle time
(refer to page 19).
Washing a large load.
Be aware that it will take longer for
the machine to fill.
Selecting various options.
Be aware that some options will
extend cycle time.
Detergent or
fabric softener
remaining
Detergent drawer not
properly closed or was
opened part way through
the cycle.
Ensure the detergent dispenser
drawer is fully closed at the start
of the cycle and remains closed
throughout the cycle.
in detergent
dispenser at the
end of the cycle.
Dirty or blocked detergent
dispenser.
Clean the detergent dispenser (refer
to page 30).
Liquid sitting at the ‘Max’
level at the end of the
Clean the fabric softener dispenser
(refer to page 30).
cycle indicates a blockage.
Dispenser over loaded
with detergent.
Clean out remaining detergent
and refer to page 23 for dosing
information.
Washing very wet
at the end of the
cycle.
Cycle selected not
appropriate.
Particularly short or delicate cycles
have shorter spins which can result in
wetter washing at the end of the cycle.
Incorrect spin speed for
load selected.
Select a faster spin speed
An out of balance load
has occurred.
The washer compensates for the
out of balance by using a lower spin
speed, to reduce noise and potential
damage to itself.
Vibrating.
Transit bolts left in place.
Washer may not be level.
Ensure transit bolts are removed prior
to use of the machine (refer to page 6).
Ensure washer is installed on an
appropriate surface and levelled
correctly (refer to page 8).
Load is out of balance.
Wash an average sized load rather than
a smaller load or a single item. Washing
one item at a time is not recommended
as it is difficult for the washer to
balance a single item during spin.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Solving wash problems
PROBLEM POSSIBLE CaUSES
WHaT TO DO
Creasing.
Washer overloaded.
Do not overload washer.
Incorrect cycle for load
type.
Use the ‘Easy Iron’ or ‘Handwash’ cycle
for creasable items.
Spin speed too fast.
Select a slower spin speed.
Wet clothes left in
washer or laundry basket.
Laundry left sitting wet is more likely
to crease. If not removing clothes
from washer immediately at end of
cycle, select the ‘Wrinkle Free’ option
(WH7060P and WH8060P models
only). Do not leave wet washing sitting
in a washing basket.
Wash temperature too
hot for load type.
Select a lower wash temperature. Check
items care label for correct care.
Items not sorted
correctly.
Sort load so that items of similar weight
are washed together (refer to page 20).
Poor soil
Removal.
Incorrect wash cycle
selected.
Select a wash cycle that is appropriate
for the amount of dirt (refer to pages
24 and 25).
Insufficient detergent.
Washer overloaded.
Ensure the correct dose of detergent
is used for the load size and soil level
(refer to page 23).
Ensure the washer is not overloaded
in terms of its capacity or the cycle
selected (refer to pages 24 and 25).
Items require a longer
wash time.
Select a higher soil level option if
available (WH7060P and WH8060P
models only).
Load was particularly
dirty.
Select ‘Pre Wash’ for particularly dirty
loads (refer to page 27).
Items not sorted
correctly.
Wash heavily and lightly soiled
garments separately.
Washer dirty from
previous wash.
After washing particularly dirty clothing,
we recommend putting the washer
through a ‘Rinse’ cycle after the load
has been removed, to wash away any
remnants of dirt and to prevent it
contaminating future washes.
Incorrect wash
temperature selected in
relation to the type of
soil.
Select a wash temperature suitable for
the type of soil, eg warm for greasy soils,
cold for muddy soils. Increasing the wash
temperature generally improves soil
removal and overall wash performance.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Solving wash problems
PROBLEM POSSIBLE CaUSES
WHaT TO DO
Dye transfer.
Coloured items not washed
separately from white/light
coloured items.
Remember to separate whites and
colours.
New or non-colourfast items
not washed separately.
Wash non-colourfast items separately
and select ‘Cold’ wash temperature.
Wet items have been left
sitting for too long.
Remove items from washer as soon
as the cycle is finished, or if items are
not to be removed from the washer
immediately select ‘Wrinkle Free’.
Wash temperature.
Consider the wash temperature
you select for your coloured items.
Lower the temperature if you are
concerned.
Black or grey
marks on clothes.
Correct amount of
detergent.
Ensure the correct dose of
detergent is used for the load size
and soil level (refer to page 23).
Washer needs to be
cleaned.
Empty the machine and complete a
‘Drum Clean’ cycle (refer to page 30).
Tangling.
Items not sorted correctly.
Separate larger items from smaller
items.
Washer loaded incorrectly.
Load items loosely and individually
into the washer (ie not folded).
Incorrect cycle for load type
selected.
Use the ‘Easy Iron’ cycle to wash
shirts.
Washer overloaded in terms
of its capacity or the cycle
selected.
Try washing average to smaller load
sizes.
Delicate items.
Wash pantyhose, bras and any other
delicate items prone to tangling in a
mesh laundry bag.
Contact a Fisher & Paykel service technician if a problem persists.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT fICHE (aCCORDING TO EU 1061/2010)
Fisher & Paykel
MODEL
WH7060P1
WH8060P1
WH7060J1
WH8060J1
Rated Capacity (kg)
ENERGy EffICIENCy
7
8
7
8
A+++ (highest efficiency)
to D (least efficient)
A+++
A+++
A+++
A+++
ENERGy CONSUMPTION
Annual Energy Consumption (kWh/year)1
Cotton full load at 60°C (kWh)
Cotton partial load at 60°C (kWh)
Cotton partial load at 40°C (kWh)
Weighted power off- mode (W)
134
0.63
0.65
0.44
0.18
115
134
0.59
0.60
0.40
0.18
115
0.50
0.54
0.41
0.18
0.49
0.53
0.39
0.18
Weighted power consumption
in left- on mode (W)
0.18
0.18
0.18
0.18
Annual water consumption (L/year)2
SPIN-DRyING EffICIENCy CLaSS3
A (most efficient) to G (least efficient)
Maximum Spin Speed (rpm)
9200
8300
9200
8300
B
B
B
B
1400
49
1400
48
1200
52
1200
53
Residual Moisture (%)
PROGRaMS TO WHICH THE INfORMaTION ON THE LaBEL aND fICHE RELaTES:
Cotton 60°C, Eco and Cotton 40°C, Eco4
PROGRaM TIME Of THE STaNDaRD PROGRaM (MIN)
Cotton full load at 60°C
216
220
206
0.2
212
219
206
0.2
219
215
203
0.2
216
213
204
0.2
Cotton partial load at 60°C
Cotton partial load at 40°C
Duration of left on mode (min)5
aIRBORNE aCOUSTICaL NOISE EMISSIONS6
Washing (dB(A))
54
70
54
72
54
68
54
68
Spinning (dB(A))
1ꢁAnnual energy consumption is based on 220 standard washing cycles for cotton for cotton programmes at 60°C
and 40°C at full and partial load, and the consumption of low power modes. Actual energy consumption will
depend on how the appliance is used.
2ꢁAnnual water consumption is based on 220 standard washing cycles for cotton programmes at 60°C and 40°C
at full and partial load. Actual water consumption will depend on how the appliance is used.
3ꢁBased on the standard 60°C cotton program at full load and the 40°C cotton program at partial load.
4ꢁThe standard 60°C cotton program and the standard 40°C program are the standard washing programmes to
which the information in the label and the fiche relates. These programmes are suitable to clean normally soiled
cotton laundry and are the most efficient programmes in terms of combined energy and water consumption.
5ꢁIn case there is a power management system.
6ꢁBased on the standard 60°C cotton program at full load.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
MaNUfaCTURER’S WaRRaNTy
You automatically receive a 2 year Manufacturer’s Warranty with the purchase of this
clothes washer covering parts and labour for servicing within the country of purchase.
fisher & Paykel undertakes to:
Repair or, at its option, replace without cost to the owner either for material or labour
any part of the product, the serial number of which appears on the product, which is
found to be defective within TWO YEARS of the date of purchase.
If your product qualifies, you also receive an additional EIGHT YEAR parts only
Manufacturer’s Warranty on your Direct Drive motor. This additional 8-year
Manufacturer’s Warranty commences on the day following the expiry of the 2-year
Manufacturer’s Warranty and excludes the motor controller and labour. Fisher & Paykel
will repair (as to parts) or, at its option, replace any Direct Drive motor (but not the
motor controller) which is found to be defective within this additional Manufacturer’s
Warranty period. You will be responsible for any labour costs.
To see if your product qualifies for this additional Manufacturer’s Warranty, refer to our
website: www.fisherpaykel.com/smartdrive
Note: these Manufacturer’s Warranties are an extra benefit and do not affect your legal
rights.
These Manufacturer’s Warranties DO NOT cover
Service calls which are not related to any defect in the product. The cost of a service
call will be charged if the problem is not found to be a product fault. For example:
A
Correcting the installation, eg removal of bottom packer and transit bolts (front
loading washers), levelling the machine, adjustment of the drain to correct siphoning,
noises, crossed, kinked or leaking inlet hose connections, turning on water, noises
caused by the waterhammer or power supplies.
1
Providing instruction on use of the product or changing the set-up of the product,
eg instruction on correct use of detergents and fabric softeners.
Replacing fuses in, or correcting house wiring or correcting house plumbing,
eg unblocking drains.
2
3
Correcting fault(s) caused by the user.
4
5
6
7
8
Noise or vibration that is considered normal, eg spin sounds, user warning beeps.
Correcting damage caused by pests, eg rats, cockroaches, etc.
Water on the floor due to incorrect loading or excessive suds.
Blocked pumps, removal of foreign objects/substances from the machine, including
the pump and inlet hose filters, eg bra wires, bread tags, nails, grit, scrud, etc.
Correcting corrosion or discolouration due to chemical attack.
9
Defects caused by factors other than:
B
Normal domestic use; or
Use in accordance with the product’s user guide.
1
2
Defects to the product caused by accident, neglect, misuse or ‘act of God’.
C
D
The cost of repairs carried out by non-authorised repairers or the cost of correcting
such unauthorised repairs.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
MaNUfaCTURER’S WaRRaNTy
Normal recommended maintenance as set out in the product’s user guide.
E
F
Repairs when the appliance has been dismantled, repaired or serviced by other than a
Fisher & Paykel service technician or the selling dealer.
Pick-up and delivery.
G
H
Transportation or travelling costs involved in the repair when the product is installed
outside the Fisher & Paykel service technician’s normal service area.
This product has been designed for use in a normal domestic (residential) environment.
This product is not designed for commercial use (whatsoever). Any commercial use by a
customer will affect this product’s Manufacturer’s Warranty.
Service under these Manufacturer’s Warranties must be provided by a Fisher & Paykel
service technician (refer to the ‘Customer Care’ section at the back of this book). Such
service shall be provided during normal business hours. This Manufacturer’s Warranty
certificate should be shown when making any claim.
Please keep this user guide in a safe place.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMER CaRE
Before you call for service or assistance…
Check the things you can do yourself.
Refer to your user guide and check:
Your appliance is correctly installed.
You are familiar with its normal operation.
You have read the ‘Troubleshooting’ section at the back of the book.
1
2
3
If after checking these points you still need assistance or parts, please contact Customer
In UK if you need assistance...*
Call the Fisher & Paykel Customer Care Centre and talk to one of our Customer Care
Consultants.
Phone: 08000 886605
Website: www.fisherpaykel.com
Postal address: Fisher & Paykel Appliances Ltd, Maidstone Road, Kingston, Milton
Keynes, Buckinghamshire, MK10 0BD, United Kingdom
*ꢀIf you call, write or contact our website please provide: your name and address, model
number, serial number, date of purchase and a complete description of the problem.
This information is needed in order to better respond to your request for assistance.
Product details can be found on the rear of the machine, and/or above the drum
opening (when the door is open).
Registration
Register your product with us so we can provide you with the best service possible.
To register your product visit our website:
www.fisherpaykel.com/uk/support/product-registration/
Complete and keep for safe reference:
Model
Serial No.
Purchase Date
Purchaser
Dealer
Suburb
Town
Country
44
Download from Www.Somanuals.com. All Manuals Search And Download.
EUROPEaN DIRECTIVE 2012/19/EU ON
WaSTE ELECTRICaL aND ELECTRONIC EQUIPMENT (WEEE)
This appliance is marked according to the European directive 2012/19/EU on Waste
Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate handling of
this product.
The symbol
marked on the serial plate, or on the documents accompanying the
product, indicates that this appliance can not be treated as household waste. It shall
be handed over to the applicable collection point for the recycling of electrical and
electronic equipment. Disposal of the appliance shall be carried out in accordance
with local environmental regulations for waste disposal.
For more detailed information about treatment, recovery, and recycling of this
product, please contact your local city office, your household waste disposal service
or your Fisher & Paykel retailer/dealer from whom you purchased this product.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright © Fisher & Paykel 2014. All rights reserved.
The product specifications in this booklet apply to the specific products
and models described at the date of issue. Under our policy of continuous
product improvement, these specifications may change at any time. You
should therefore check with your dealer to ensure this booklet correctly
describes the product currently available.
GB
429005 B
10.14
Download from Www.Somanuals.com. All Manuals Search And Download.
|