FireplaceXtrordinair Indoor Fireplace 864TRV User Manual

864TRV Arched Face  
• Classic Black 99300497  
• Artisan 99300498  
• Nickel 95800615  
Part Numbers  
• Artisan Antique Copper 95800619  
• Artisan Antique Nickel 95800620  
• French Country 99300499  
• French Country Black 95800616  
Compatibility:  
• 864TRV Fireplace  
• 864 HH Fireplace  
Packing List:  
• Face  
• (4) 8-32 Nuts  
• (2) Face Mounting Brackets (w screws)  
• Glass Frame Cover  
• (2) 10-24 1-1/2" Screws  
The FPX Face Upgrade Kit (98500686) must  
be installed prior to installing the facing  
material and face.  
Installation  
Details  
SIDE OF FIREPLACE  
5"  
Radius = 45-3/4”  
35-3/4"  
41”  
1”  
5/16TO 1”  
NOTE:  
This face has an adjustable bracket that allows for  
different facing depths to be tucked under the face.  
NOTE FOR THICK FACING (BRICK, ROCK, ETC.):  
The Fireplace Xtrodinair 864 Set-Up Face is recommended for  
masonry installation (98500688). The set-up face helps locate  
and support the masonry during installation.  
Page 1 of 4  
5/3/07  
© Travis Industries, Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
864TRV Arched Face  
2
The facing and hearth (if applicable) must be installed prior to attaching the face. See the installation manual  
for complete details.  
Raised  
Fireplaces  
Note how the tile is 1”  
(maximum) above the  
base of the fireplace.  
Floor-Level  
Fireplaces  
Maximum 1`Hearth  
Page 3 of 4  
5/3/07  
© Travis Industries, Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
864TRV Arched Face  
3
Install the face following the directions below.  
Attach the upper brackets  
to the face with the  
included nuts.  
a
The face is secured to the fireplace  
Slide the face into place. The  
tabs on the upper brackets insert  
into the slots on the fireplace  
brackets, holding the face in place  
while the screws are tightened.  
with four screws. Two of the screws  
c
b
are fastened to the upper brackets  
with press nuts. The lower screws  
are included with the face.  
Plated Surfaces  
Denatured  
Alcohol  
Use denatured alcohol and a soft cloth to clean plated surfaces. Marks  
left on the surface may damage the face.  
Soft Cloth  
Page 4 of 4  
5/3/07  
© Travis Industries, Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Echo Chainsaw CS 400F User Manual
Eiki Projector LC 6200U User Manual
Electro Voice Portable Speaker MTL 2BT User Manual
Everpure Water System SSW 10 User Manual
Extron electronic Network Card CSM 6 User Manual
Extron electronic Switch WPB 109 User Manual
Frigidaire Double Oven FFGF3047L S User Manual
Gaggia Espresso Maker Machine Baby Dosata User Manual
Garland Cooktop GI SH DU GR 10000 User Manual
Global Machinery Company Saw LSM210A User Manual