Trailer Hitch Kit
Part No. 5600056
Installation
Instructions
Kit Contents:
Fits 2006 Simplicity Champion Series
Fits 2006 Snapper and Massey Ferguson Consumer Z Series
Part No.
5401582
5401581A
Qty. Description
1
1
Hitch Plate Assembly
Back Plate
5025013X20 4
5025394
3/8-16 x 2-1/2” Bolt
3/8-16 Nylock Flange Nut
4
B
WARNING
Before beginning any service work turn off the
PTO, set the parking brake, turn off the ignition,
and disconnect the spark plug wire(s).
1. Park machine on a flat, level surface and engage the
parking brake. Diesengage the PTO switch, turn off
the engine and remove the key from the ignition.
A
2. If the engine is hot, allow sufficient time for the muf-
fler to cool to prevent a burn injury during installation.
D
C
3. Install the 3/8-16 x 2-1/2” bolts (B) through the hitch
plate (A).
4. Install the hitch plate onto the bumper with the bolts
in between the bottom and middle bumper tubes.
Figure 1. Install Hitch Kit
A. Hitch Plate
B. 3/8-16 x 2-1/2” Bolts (4X)
C. Back Plate
5. Install the back plate (C) and loosely secure with the
3/8-16 nylock flange nuts (D).
D. 3/8-16 Nylock Flange Nut (4X)
6. Center the hitch plate side-to-side on the bumper
and tighten the hardware securely.
5100523
Rev. 1/2006
TP 200-7280-00-AT-SMN
© Copyright 2006 Ferris Industries. All Rights Reserved.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
|