SB-83i
Please read these instructions before use.
Do not discard: keep for future reference.
fellowes.com
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Model SB-83i
KEY
®
A. SafeSense Technology
B. Paper entry
F. Casters
K. Bin full (red)
P. Reverse
Q. On/off (blue)
R. Forward
G. Disconnect power switch
H. Power controls
I. Overheat (red)
J. Bin open (red)
L. Remove Paper (red)
®
C. See safety instructions
D. CD/Card flap
E. Pullout bin
M. SafeSense indicator (yellow)
N. Sheet capacity indicator
O. Auto correcting button (blue)
CAPABILITIES
Will shred: Paper, credit cards, CD/DVD’s, staples and small paper clips
Maximum:
Sheets per pass ........................................................................................................... 18*
CDs/Cards per pass ....................................................................................................... 1*
Paper entry width.............................................................................................9”/230mm
Will not shred: Adhesive labels, continous form paper, transparencies, newspaper,
cardboard, large paper clips, laminates, file folders, X-rays or plastic other than noted
above
*8.5”x11”, 20lb., (75g) paper at 120V, 60 Hz, 3Amps; heavier paper, humidity
or other than rated voltage may reduce capacity. Recommended daily usage rates:
Paper shred size:
Strip-Cut........................................................................................... 7/32 inches (5.8mm)
50–100 shredding passes per day, 50 credit cards; 10 CDs.
18 sheets per pass.
Fellowes SafeSense® shredders are designed to be operated in home and office environments ranging
between 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius) and 40 – 80% relative humidity.
ADVANCED PRODUCT FEATURES
Patented SafeSense® Technology
Stops shredder immediately when
hands are too close to the paper entry.
Jam Proof System
SilentShred™ Technology
SilentShred™ noise quality
shreds without noisy disruptions.
Eliminates frustrating jams by
preventing overloads and powering
through misfed paper.
TECHNICAL EXPLANATION
TECHNICAL EXPLANATION
TECHNICAL EXPLANATION
Sheet capacity indicator tells you
when you have too many sheets or
too few to maximize productivity
Shredder will stop automatically and
indicator will light up when hands
are too close to the paper entry
SilentShred™ motor
features whisper-quiet,
efficient shredding
performance without
the noisy disruptions
Shredder will resume normal
operation when hands are no
longer near the paper entry
Shredder will not operate when too many
sheets are fed into paper entry (red
light). Reduce sheet quantity and refeed
18
Flashing indicator warns when
SafeSense technology has been
shut off
If misfed, shredder will automatically
adjust to power through or reverse
out paper
®
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
• Keep away from children and pets. Keep hands away from paper
entry. Always set to off or unplug when not in use.
• This shredder has a Disconnect Power Switch (G) that must be in the ON (I)
position to operate shredder. In case of emergency, move switch to OFF (O)
position. This action will stop shredder immediately.
• Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away
from shredder openings. If object enters top opening, switch to
Reverse ( ) to back out object.
• Avoid touching exposed cutting blades under shredder head.
• Rotate CD flap entry for shredding CDs/cards. Keep finger away from
CD hole. Jam Proof System is disabled when flap is in CD position.
• Never use aerosol products, petroleum based lubricants or other flammable
products on or near shredder. Do not use canned air on shredder.
• Do not put foreign objects in paper entry.
• Do not use if damaged or defective. Do not disassemble shredder. Do
not place near or over heat source or water.
• The grounded socket-outlet shall be installed near the equipment and shall be
easily accessible.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC SET UP AND SHREDDING OPERATION
CASTER INSTALLATION
1
2
3
4
5
PAPER OR CD/CARD
1
2
3
4
5
6
18
18
AU
TO
AU
TO
Continuous operation:
20-minute maximum
Plug in and put
Feed paper straight into
paper entry and release
To shred CDs rotate
CD flap into place
Hold CD/card at edge,
feed into CD/Card flap
entry and release
When finished
shredding set
Press ( ) ON to
activate (blue)
disconnect power
NOTE: Shredder runs briefly
after each pass to clear entry.
Continuous operation beyond
20-minutes will trigger
switch in ON (I) position
to OFF (
)
40-minute cool down period.
JAM PROOF SYSTEM OPERATION*
Eliminates frustrating jams by preventing overloads and powering through misfed paper.
SET-UP AND TESTING
MISFED PAPER
3
2
3
2
18
AU
TO
AAUUTTOO
1
1
If Remove Paper icon (
illuminated, press reverse and
remove paper
) is
If too many sheets, indicator will
light up to red and shredder will
not take paper
Remove several sheets until the
indicator is below red and the
shredder will take the paper
Automatic correcting action
will power through the misfed
paper, so shredding can
continue (do not add more
paper during flashing)
18
AU
TO
If paper is misfed and
stops shredding, all
indicator lights will
illuminate and shredder
will pause for 3-6
seconds
Feed into paper entry
and release
3
2
2
3
18
18
AU
TO
AU
TO
Shredder will take fewer sheets,
but if indicator is below yellow,
you can add more sheets without
fear of jamming
Increase the number of sheets
being fed up to the top yellow light
to maximize your productivity
If there is too much paper for
the shredder to power through,
it will reverse the paper out for
easy removal
Reduce paper quantity to an
acceptable amount and refeed into
paper entry
*100% Jam Proof when used in accordance with user manual
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Model SB-83i
SAFESENSE® TECHNOLOGY OPERATION
Stops shredder immediately when hands are too close to the paper entry.
SET-UP AND TESTING
1
2
3
AU
AU
TO
TO
®
Turn the shredder ON
Touch test area and
look for the SafeSense
indicator to illuminate
SafeSense is active and
working properly
®
®
(
) to activate SafeSense
ADVANCED PRODUCT FEATURE MAINTENANCE AND TROUBLESHOOTING
JAM PROOF SYSTEM*
Eliminates frustrating jams by preventing overloads and powering through misfed paper.
DISABLING THE FEATURE
3
4
3
5
2
3
6
1
18
18
18
AU
AU
TO
AU
TO
AUTO
AUTO
Shredding can continue with
the system disabled, however a
paper jam may occur with too
many sheets and remove
Should you choose to disable Once disabled, the blue
If jam occurs, press and
hold forward ( ) key until
the document is completely
through the shredder
If not cleared, press
reverse ( ) briefly
(repeat steps 4 and 5
until shredded)
If steps 4 and 5 do not clear
jam, reverse paper all the
way out, remove several
sheets and refeed
the system, press and hold
the auto button (blue) and
reverse ( ) key at the
same time
Auto light is no longer
illuminated (To re-engage,
repeat step 1)
paper icon
(
)
will illuminate
*100% Jam Proof when used in accordance with user manual
4
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PRODUCT MAINTENANCE AND TROUBLESHOOTING
CLEANING AUTO-START INFRARED SENSORS
Paper detection sensors are designed for maintenance free operation. However, on rare occasions the sensors may become blocked by paper dust causing the motor to run
even if there is no paper present (Note: two paper detection sensors are located in the center of the paper entry).
TO CLEAN THE SENSORS
2
3
4
5
1
18
18
AUT
O
AU
TO
AU
TO
Turn off and unplug
shredder
Lift CD flap
Locate Auto-start
infared sensor
Dip cotton swab in
rubbing alcohol
Using cotton swab, wipe
away any contamination
from the paper sensors
PREVENTIVE MAINTENANCE AND MISCELLANEOUS TROUBLESHOOTING
• Run shredder once a day in reverse for 15 seconds to clear cutters
• Empty wastebasket when bin full indicator light is illuminated using bag # 36052
• Shredder will not function if the pull-out bin is not pushed all the way in, or if bin needs to be emptied.
• When shredding for a prolonged period of time, the motor can become warm and require a cool down period. When this occurs the overheat indicator will alert you to the
problem, this model will require 40 minutes to cool down.
ACCESSORIES
Maintenance is an important part of protecting your investment. Don’t forget shredder bags.
SB-83i Shredder
plastic bag – #36052
PROBLEM STILL NOT SOLVED?
Fellowes is committed to giving our customers the support and service they deserve. That is why we offer several options for you to find technical information, step-by-step
assistance and personal attention.
• www.fellowes.com features an extensive on-line support section with a number of self-service options
• Our customer service professionals are dedicated to resolve any of your issues
5
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
Our promise to you is quite simple. Fellowes shredders are built stronger, engineered to run longer, during the warranty period, your sole and exclusive remedy will be repair or replacement, at Fellowes’
resist jams and power through large jobs. The Fellowes worry free warranty described below covers option and expense, of the defective part. This warranty does not apply in cases of abuse, mishandling,
the performance of the product, provides for prompt service and support, plus a lifetime cutter or unauthorized repair. ANY IMPLIED WARRANTY, INCLUDING THAT OF MERCHANTABILITY OR FITNESS
warranty.
FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION TO THE APPROPRIATE WARRANTY
PERIOD SET FORTH ABOVE. In no event shall Fellowes be liable for any consequential or incidental
Limited Warranty: Fellowes, Inc. (“Fellowes”) warrants the parts of the machine to be free of defects damages attributable to this product. This warranty gives you specific legal rights. The duration, terms,
in material and workmanship and provides service and support for 2 years from the date of purchase and conditions of this warranty are valid worldwide, except where different limitations, restrictions,
by the original consumer. Fellowes warrants the cutting blades of the machine to be free from defects or conditions may be required by local law. For more details or to obtain service under this warranty,
in material and workmanship for the lifetime of the shredder. If any part is found to be defective please contact us or your dealer.
DATE OF PURCHASE
SERIAL NUMBER
Serial Number is located on inside of cabinet.
AUT
O
Serial Number
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Phone Numbers
Help Line
Europe
00-800-1810-1810
+1-800-234-1185
+1-800-955-0959
Australia
+1-800-33-11-77
+1-800-665-4339
Mexico
Canada
United States
Fellowes
Australia
Benelux
Canada
+61-3-8336-9700
+31-(0)-76-523-2090
+1-905-475-6320
Japan
+81-(0)-3-5496-2401
+82-(0)-2-3462-2884
+60-(0)-35122-1231
+48-(22)-481-96-12
+65-6221-3811
Korea
Malaysia
Polska
Deutschland
Espana
+49-(0)-5131-49770
+34-91-748-05-01
+33-(0)-1-78-64-91-00
+39-071-730041
Singapore
United Kingdom
United States
France
+44-(0)-1302-836836
+1-630-893-1600
Italia
1789 Norwood Avenue, Itasca, Illinois 60143-1095 • USA• 630-893-1600
France
Germany
Spain
Italy
Japan
Australia
Korea
Benelux
Poland
Canada
Russia
China
Singapore
South Africa
United Kingdom United States
©2010 Fellowes, Inc. Part No. 404849
Download from Www.Somanuals.com. All Manuals Search And Download.
|