Fellowes Paper Shredder PowerTrim User Manual

Electric Paper Trimmer  
TM  
PowerTrim  
Please read these instructions before use.  
E
Lire ces instructions avant utilisation.  
Lea estas instrucciones antes del usarlo.  
F
S
Download from Www.Somanuals.com. All Manuals Search And Download.  
TRIMMER CONTROLS  
A
H
E
G
B
F
C
D
QUICK START GUIDE  
1
2
3
7
4
8
12”  
6
5
9
10  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
E
ENGLISH  
CAPABILITIES  
Performance  
Cutting length  
Max cutting capacity  
Trimming mechanism  
PowerSave Auto Shut-off  
Technical Data  
Main voltage  
Frequency  
Wattage  
Amps  
16.5” / 420mm  
30 sheets / 20lb  
Electric trimming  
30min  
120V AC  
50/60Hz  
80 Watts  
1.8 Amps Max.  
24V DC / 1.8 Amps  
Machine rating  
Dimensions (WxDxH)  
24.5” x 12” x 4.75” / 620 x 300 x 120mm  
11lbs / 5 kg  
Net weight  
IMPORTANT SAFETY INSTRUCTIONS  
CAUTION: Please read before use and keep for future reference.  
Warning - blades are extremely sharp when exposed.  
When trimming:  
DO ensure the machine is on a stable surface.  
DO NOT leave the power cord in contact with hot surfaces.  
DO NOT leave electric cord hanging from cupboards or shelves.  
DO NOT use appliance if the power cord is damaged.  
DO NOT exceed the machines quoted performance.  
DO plug the machine into an easily accessible socket.  
DO test cuts on scrap sheets before trimming final documents.  
DO remove staples and other metal articles prior to trimming.  
DO keep the machine away from heat and water sources.  
DO turn off the machine after each use.  
DO NOT open or attempt to repair, as this will void your war-  
ranty. Contact Customer Service if you have any questions.  
DO switch off and unplug PowerTrim when not in use.  
PRODUCT REGISTRATION  
Thank you for purchasing a Fellowes product. Please visit www.fellowes.com/register to register your product and benefit from  
product news, feedback and offers. Product details can be found listed on the rating plate positioned on the rear side or underside  
of the machine.  
NEED HELP?  
Let our experts help you with a solution. You’ll find the numbers  
for your nearest service center on the back cover of this manual.  
Customer Service:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
TRIMMER CONTROLS  
A
B
C
On/off switch (at side)  
Cut-Control LED touch pad  
SafeCutClamp  
E
Overload protection - Paper gauge  
Illuminated LED cutting bed  
F
G
SafeCut™ Guard (at rear) to protect internal mechanism  
- with power breaker (magnetic closure)  
D
Carry point  
H
Window for paper alignment  
FEATURES & TIPS  
FEATURES  
TIPS  
SafeCut™ Guard  
Ensures that power supply is stopped when guard  
is opened – for service and maintenance.  
Always clamp paper down with SafeCut™ Clamp before  
trimming.  
Make sure paper is properly adjusted.  
Replace blade unit every 2000 cuts and cutting strip every  
500 cuts or when showing signs of wear. Item number for  
accessory pack # 54125.  
Align cut line with the outer edge of the orange trimline.  
For best results, mark the exact cut position on the item  
before trimming and try trimming a test sheet.  
SafeCut™ Clamp  
Ensures that paper is securely clamped before  
trimming – trimmer won’t cut when SafeCut™  
Clamp is not closed.  
Electric trimming  
The ultimate trimming solution for safety and  
comfort – PowerTrim Electric trimming.  
Cut Control function  
LED touch pad with Start-Stop function to start  
and stop trimming . User can stop trimming if  
finished before cycle of 6 cuts has ended.  
WORLDWIDE WARRANTY  
Fellowes warrants all parts of the trimmer to be free of defects in material and workmanship for 2 years from the date of  
purchase by the original consumer. If any part is found to be defective during warranty period, your sole and exclusive remedy  
will be repair or replacement, at Fellowes’ option and expense, of the defective part. This warranty does not apply in cases of  
abuse, mishandling or unauthorized repair. Any implied warranty, including that of merchantability or fitness for particular  
purpose, is hereby limited in duration to the appropriate warranty period set forth above. In no event shall Fellowes be liable for  
any consequential or incidental damages attributable to this product. This warranty gives you specific legal rights. You may have  
other legal rights that vary from this warranty. The duration, terms and conditions of this warranty are valid worldwide, except  
where different limitations, restrictions or conditions may be required by local law. For more details or to obtain services under this  
warranty, please contact Fellowes or your dealer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
BEFORE TRIMMING  
1. Ensure the machine is on a stable surface. Check that  
there is enough clear space behind the machine to allow  
trimmed items to pass through freely.  
2. Connect the supplied power lead to the machine.  
3. Plug the power lead in to an easily accessible main  
socket. Switch the main supply on.  
STEPS TO TRIM  
9.  
4. Switch the power on.  
To trim press the Cut-Control LED touch pad. When  
touched, the Cut-Control LED will light up in pink and  
then turn flashing blue when it is cutting.  
5.  
Insert document to trim. Use the document gauge at  
the sides of the cutting base to check that items do not  
exceed maximum capacity.  
10. PowerTrim will complete 3 cut cycles (of 6 cuts) for  
cutting max 30 sheets (20lb). To stop cutting press the  
Cut-Control LED touch pad.  
6.  
Use transparent window with orange trimline guide to  
quickly and accurately align your cuts. Align cut line  
with the outer edge of the orange trimline. For best  
results, mark the exact cut position on the item before  
trimming and try trimming a test sheet.  
11. Release clamping mechanism again before removing  
items from cutting bed.  
7.  
Alternatively, align item with the cut dimensions on the  
base of the trimmer.  
Secure document with SafeCut™ Clamp, the Cut-  
Control LED touch pad will light up blue.  
8.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
BLADE UNIT REPLACEMENT  
Tighten screws. Re-secure  
SafeCut™ Guard.  
Unplug PowerTrim. Remove  
SafeCut™ Guard  
(magnetic catch).  
Unscrew the 2 cross  
Remove the cutter  
head screws on either  
side of the cutter blade  
unit (Phillips type  
screwdriver).  
blade unit by pulling  
the button on the blade  
unit. Replace with new  
blade unit (#54125).  
CHANGING CUTTING STRIPS  
Unplug PowerTrim. Remove  
SafeCut™ Guard (magnetic  
catch).  
Make sure SafeCut™  
Clamp is open.  
Rotate small safety catches to release the cutting strip. Turn  
cutting strip over to use other side of the strip . When all  
areas have been used, replace cutting strip with new one  
from accessory pack (#54125). Re-secure cutting strip and  
SafeCut™ Guard again.  
REPLACEMENT ACCESSORIES  
The following replacement parts are available for PowerTrim as a combined accessory pack (#54125):  
Item  
Required  
1 blade unit  
2 cutting strips  
After 2000 cuts  
After 500 cuts  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
TROUBLESHOOTING AND LED INDICATORS  
Status  
Possible Cause  
Solution  
Scissor icon is ON. Base LED lights  
are ON  
Ready to trim (clamped down and all  
covers closed)  
-
Scissor Icon is OFF. Base LED lights  
are ON  
SafeCut Clamp is open  
No power  
Insert item and close SafeCut Clamp  
Turn on main supply and switch on  
machine  
Scissor Icon is OFF. Base LED lights  
are OFF  
Ensure SafeCut Guard is correctly  
closed  
SafeCut Guard is open  
Touched scissor icon  
Trimming in progress  
Scissor icon is PINK + beep sound  
-
Scissor icon flashing BLUE (FAST). Base  
lights are ON  
-
Scissor icon flashing BLUE (SLOW).  
Base lights are OFF  
PowerSave mode  
Touch scissor icon.  
Touch scissor icon.  
Machine will cut for 3 cut cycles (or 6  
cuts) automatically  
Paper is cut, machine is still operating  
Scissor icon flashes RED and BLUE.  
Base lights are ON  
Check SafeCut Clamp is closed and  
SafeCut Guard is correctly closed  
Error  
Machine must cool for 30 minutes  
(minimum)  
Scissor icon is RED. Base lights are OFF Error. Machine is hot  
Flip cutting strip and use reverse side.  
Check blade quality. Replace from  
accessory pack (CRC 54125)  
Poor cut quality  
Worn cutting strips or worn blades  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
FCC CLASS B NOTICE  
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC  
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-  
ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may  
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
CANADA CLASS B NOTICE - AVIS CANADA, CLASSE B  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
MODIFICATIONS  
Any modifications made to this device that are not approved by Fellowes may void the authority granted to the user by the FCC and/or  
by Industry Canada to operate this equipment.  
Toutes modifications apportées à ce dispositif et non approuvées par Fellowes annuleront le droit accordé à l’utilisateur par le FCC et/ou  
par Industrie Canada de faire fonctionner cet équipement.  
Fellowes  
Australia  
Benelux  
Japan  
+81-(0)-3-5496-2401  
+82-(0)-2-3462-2844  
+60-(0)-35122-1231  
+48-(22)-771-47-40  
+7-(495)-228-14-03  
+65-6221-3811  
+61-3-8336-9700  
+31-(0)-76-523-2090  
+1-905-475-6320  
+49-(0)-5131-49770  
+ 34 902 33 55 69  
+33-(0)-1-30-6-86-80  
+39-71-730041  
Korea  
Malaysia  
Polska  
Canada  
Deutschland  
España / Portugal  
France  
Russia  
Singapore  
United Kingdom  
United States  
+44-(0)-1302-836836  
+1-630-893-1600  
Italia  
1789 Norwood Avenue, Itasca, Illinois 60143-1095 • USA • 630-893-1600  
fellowes.com  
Deutschland  
España  
Australia  
Benelux  
Japan  
Korea  
Polska  
Singapore  
France  
Italia  
Canada  
China  
United Kingdom  
United States  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2009 Fellowes, Inc. Part No. 403954-1  

EdgeStar Washer Dryer sw5l40d User Manual
Euro Pro Fryer K4320 User Manual
Fluke Slow Cooker Ti30 User Manual
GarrettCom Switch Hubs User Manual
GE Camcorder 21018 User Manual
GE Camcorder PNRQ20F User Manual
GE Double Oven JBP89SM User Manual
Gefen Switch 4x2 HDMI User Manual
GE Microwave Oven JES1134 User Manual
GE Oven JKP90BM User Manual