Help Line
Fellowes
Australia
Canada
+ 1-800-33-11-77
+ 1-800-665-4339
+ 1-800-234-1185
+ 1-800-955-0959
México
United States
Australia
Benelux
+ 61-3-8336-9700
+ 31-(0)-347-377988
+ 1-905-475-6320
Canada
Deutschland
France
+ 49-(0)-5131-49770
+ 33-(0)-1-30-06-86-80
+ 39-(0)-71-730041
+ 81-(0)-3-5496-2401
+ 82-(0)-2-3462-2884
+ 60-(0)-35122-1231
+ 48-(0)-22-837-7356
+ 65-6221-3811
Italia
Japan
Korea
Malaysia
Polska
Singapore
United Kingdom
United States
+ 44-(0)-1302-836836
1-630-893-1600
PS70-2CD
PS80C-2
Please read these instructions before use
© 2003 Fellowes Printed in China. Form No. 400451
Download from Www.Somanuals.com. All Manuals Search And Download.
Set-Up
Product Profile
This shredder will only operate when used with the supplied basket. The supplied basket
has a built-in safety feature which prevents the shredder from operating if used with any
other basket or if improperly assembled.
This product is built to shred paper, staples, small paper clips,
credit cards, CDs and DVDs. It is not built to take large paper
clips, continuous forms, adhesive labels, transparencies, newspa-
per, cardboard or any plastic other than credit cards. Using it for
these purposes is likely to cause irreparable damage.
•Position shredder head (6) over cabinet (2). Place shredder head on top of cabinet as
shown in Figure A.
•Firmly push down on four corners of shredder head to “lock” shredder head into position.
•Push basket (3) into shredder cabinet as shown in Figure B. Basket must be pushed firmly,
so edges of basket/cabinet are aligned properly.
Strip-cut
PS70-2CD
15 sheets
7/32"
(5.8 mm)
1
Confetti Cut
PS80C-2
10 sheets
5/32" x 1-1/2"
(3.9 x 38 mm)
1
NOTE: To disassemble, pull out basket, hold cabinet down by placing foot on bottom
shelf, and firmly pull up on shredder head.
Sheet capacity*
Paper shred size
Operation
For convenience, your shredder is equipped with an automatic-start sensor (8). This
means that when the control switch (5) is in the automatic [I] position, the shredder will
start running when paper is fed into it. The shredder stops a few seconds after the paper
has passed through. Because the sensor cannot tell the difference between paper and
other objects, this feature can be a hazard, especially to children and pets. To avoid
accidents, turn off the shredder as soon as you are finished. Unplug shredder if it will
not be used for an extended period.
CD/DVD capacity
Maximum paper width
Recommended daily capacity
Maximum running time
Automatic cool-down period
Voltage
9" (229 mm)
50-100 shredding passes
20 minutes
30 minutes
120 V / 60 Hz / 6.0 A
*Based on 20 lb., 8-1/2" x 11" (70gsm, A4) paper with shredder operating at rated voltage; heavier paper, high humidity,
or other than rated voltage may reduce sheet capacity.
To shred
•Plug in shredder with control switch (5) in off [O] position
•Press control switch to automatic [I] position; cutting cylinders will run for 1-2 seconds to
signal readiness and green light (4) will turn on.
IMPORTANT SAFETY INSTRUCTIONS
PAPER
READ ALL INSTRUCTIONS BEFORE USING
•Feed paper straight into entry (1), until the shredder automatically begins shredding; see
Product Profile for limits on paper width, shreddable items, sheet capacity, etc.
•Shred for no more than 20 minutes; shredding longer will cause shredder to turn itself off
for 30 minutes to cool down.
•Press control switch to off [O] position after cutting has stopped. With confetti-cut shred-
der, cutting continues for several seconds after paper has gone through in order to clear
shredded paper from cutting cylinders.
While setting up shredder
•Check shredder for damage or defects; some paper particles in the basket are normal
due to product testing and does not indicate a defect.
•If the cord is damaged do not replace cord or use the machine. Return machine for a
replacement.
•Avoid touching exposed blades on underside of PS80C-2 confetti-cut shredder head.
•Plug power cord in an outlet that can easily be reached.
CDs and DVDs
•Hold CD or DVD at the edge and feed one at a time, straight into CD entry (10),
releasing when shredding begins. Shredder will stop when CD has passed through
entry. CDs will be shredded into small particles.
•Do not place shredder near or over a heat or water source.
While operating shredder
•Keep hands and hanging objects (jewelry, ties, loose clothing,
CAUTION: Do not hold CD or DVD with finger through the center ring while feeding
long hair, etc.) away from paper entry.
into shredder.
•Keep children and pets away from the shredder.
In case of a paper jam, which may occur if the sheet capacity is exceeded or if paper is
not put in straight, turn off and empty the basket if full. Then:
When not in use
•Always turn off and unplug shredder
1) Press and hold control switch in reverse [R] position and attempt to back paper out of
shredder.
•Unplug before emptying basket
•Do not open shredder head: Danger of electric shock.
2) If shredder jams in reverse mode, press control switch to automatic [I] position and
attempt to continue shredding operation.
NOTE: Do not use flammable synthetic oil, petroleum-based products
or aerosols of any kind on or near product at any time.
3) If shredder jams again, alternate control switch slowly between reverse [R] and auto-
matic [I] positions to attempt to move jammed paper completely through shredder.
If you are unable to clear the jam using this method, turn off and unplug the shredder;
remove wastebasket from the cabinet and carefully remove any paper extending below
the cutting cylinders; insert wastebasket and repeat jam clearing procedure.
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Customer Service
Regular emptying of the basket is important to ensure the smooth operation of the cut-
ting cylinders. If you can see paper in the basket window (7), turn off the shredder, pull
out basket and empty basket contents.
Fellowes offers a toll-free help line for customers living in the United States, Canada,
Mexico and Australia. If you live outside these regions or are otherwise unable to use our
help line, please call the Fellowes location nearest you, send a letter or email, or contact
your local dealer. All of our customer service phone numbers and other points of contact
are listed on the back of this manual.
Regular oiling of the confetti-cut model (PS80C-2) is also necessary to
ensure proper performance. If you are running the shredder at or near capaci-
ty, we recommend oiling it monthly. Using Fellowes Powershred Lubricant
#35250 or other non-aerosol vegetable-based oil in a long-nozzle container:
Limited Warranty
Fellowes, Inc. warrants the cutting cylinders of the machine to be free from defects in
material and workmanship for 7 years from the date of purchase by the original con-
sumer. Fellowes warrants all other parts of the machine to be free of defects in material
and workmanship for 1 year from the date of purchase by the original consumer. If any
part is found to be defective during the warranty period, your sole and exclusive remedy
will be repair or replacement, at Fellowes’ option and expense, of the defective part.
• Apply oil over full width of paper entry (1) with shredder in off [O] position.
• Press control switch to automatic [I] position which will cause shredder to run for about 2
seconds.
• Press and hold control switch in reverse [R] position for 3–5 seconds.
• Repeat above automatic [I] and reverse [R] sequence three times.
REMINDER: Do not use flammable synthetic oil, petroleum-based products or
This warranty does not apply in cases of abuse, mishandling or unauthorised repair.
ANY IMPLIED WARRANTY, INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION TO THE APPROPRIATE
WARRANTY PERIOD SET FORTH ABOVE. IN NO EVENT SHALL FELLOWES BE LIABLE
FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ATTRIBUTABLE TO THIS
PRODUCT. This warranty gives you specific legal rights. You may have other legal rights
that vary. The duration, terms and conditions of this warranty are valid worldwide, except
where different limitations, restrictions or conditions may be required by local law.
aerosol lubricants of any kind in or near the shredder at any time.
Troubleshooting
If you have a problem with your shredder, check the symptoms and remedies below. If
you cannot solve the problem this way, contact Fellowes Customer Service. Do not open
shredder head to attempt repair: It could expose you to serious electric shock and will
void your warranty.
For more details or to obtain service under this warranty, please contact us (see back
cover) or your dealer.
Symptom
Remedy
Shredder does not start or stops while
shredding.
• Make sure shredder is plugged in and
switch is in automatic [I] position.
• If paper appears to be jammed, follow
instructions under Operation.
• Check basket position; basket must be
pushed all the way in the cabinet.
Follow instructions under Set-Up.
• Wait 30 minutes for shredder to cool
down before trying again.
Red display light (9) turns on and shredder
will not operate.
• If paper appears to be jammed, follow
instructions under Operation.
• Check basket position; basket must be
pushed all the way into the cabinet.
Follow instructions under Set-Up.
Shredder squeaks, grinds or runs below
capacity.
• Oil cutting cylinders (PS80C-2 only).
Follow instructions under Maintenance.
• Check window. If paper is visible,
empty basket. Follow instructions under
Maintenance.
Shredder continues to run for a few sec-
onds after paper has cleared the cutting
cylinders.
No action required. This is a self-cleaning
function.
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
|