®
POWERSHRED 99Ci
Please read these instructions before use.
Do not discard: keep for future reference.
Quality Office Products Since 1917
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC SHREDDING OPERATION
PAPER OR CD/CARD
1
2
3
4
5
6
17
or
Continuous operation:
25-minute maximum
NOTE: Shredder runs briefly
after each pass to clear entry.
Continuous operation beyond
25-minutes will trigger
Plug in and put
Feed paper straight into
paper entry and release
To shred CDs or credit
cards rotate safety flap
into place
Hold card/CD at edge.
Feed into center of
entry and release
When finished
shredding set
Press ( ) ON to
activate (blue)
disconnect power
switch in ON (I) position
to OFF (
)
40-minute cool down period.
ADvANCED PRODUCT FEATURES
Patented SafeSense® Technology
Stops shredding immediately when
hands touch the paper opening.
SilentShred™ Technology
SilentShred™ noise quality
shreds without noisy disruptions.
Jam Proof System
Eliminates jams and powers
through tough jobs.
JAM PROOF SYSTEM OPERATION*
Eliminates paper jams and powers through tough jobs.
Advanced Jam Prevention- Electronically
measures paper thickness to prevent paper jams:
1
2
3
Up to RED: Too Many
sheets have been inserted.
Remove several sheets until
indicator is below red.
Continue 100% Jam
Proof Shredding
Up to YELLOW: Productivity
is optimized.
Up to GREEN: More sheets
can be added.
If
illuminates after paper has been
If a misfeed
occurs:
All indicators light up and
shredder pauses for 3-6 seconds
Wait for flashing to stop after automatic correction
is complete. Regular shredding will resume.
reversed, press reverse and remove paper.
Otherwise, regular shredding will resume.
*100% Jam Proof when used in accordance with user manual
SAFESENSE® TECHNOLOGY OPERATION
Stops shredding immediately when hands touch the paper opening.
SET-UP AND TESTING
1
2
3
17
17
®
Turn the shredder ON
Touch test area and
SafeSense is active and
®
®
(
) to activate SafeSense
look for the SafeSense
working properly
indicator to illuminate
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Model 99Ci
PRODUCT MAINTENANCE
OILING SHREDDER
CLEANING AUTO-START INFRARED SENSORS
All cross-cut shredders require oil for peak performance. If not oiled, a
machine may experience diminished sheet capacity, intrusive noise when
shredding and could ultimately stop running. To avoid these problems, we
recommend you oil your shredder each time you empty your waste bin.
Paper detection sensors are designed for maintenance free operation. However, on rare occasions the sensors
may become blocked by paper dust causing the motor to run even if there is no paper present.
(Note: two paper detection sensors are located in the center of the paper entry).
TO CLEAN THE SENSORS
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
17
2
3
4
1
2
1
17
17
Turn off and unplug
shredder
Locate Auto-start
infared sensor
Dip cotton swab in
rubbing alcohol
Using cotton swab, wipe
away any contamination
from the paper sensors
*Apply oil across entry
Press and hold forward (
2-3 seconds
)
*Only use a non-aerosol vegetable oil in long
nozzle container such as Fellowes 35250
TROUBLESHOOTING
A. Overheat Indicator: When the Overheat Indicator is illuminated, the shredder has exceeded its maximum
operating temperature and needs to cool down. This indicator will remain illuminated and the shredder will
not operate for the duration of the recovery time. See Basic Shredding Operation for more information about
the continuous operation and recovery time for this shredder.
B. Bin Open: The shredder will not run if the bin is open.
When illuminated, close the bin to resume shredding.
A
B
C
D
E
C. Bin Full: When illuminated, the shredder waste bin is full and needs to be emptied.
Use Fellowes waste bag 36053.
D. Remove Paper: When illuminated, press reverse ( ) and remove paper.
Reduce paper quantity to an acceptable amount and refeed into paper entry.
E. SafeSense® Indicator: If hands are too close to the paper entry, the SafeSense® indicator will illuminate
and the shredder will stop shredding. If SafeSense® is active for 3 seconds, the shredder will automatically
turn off and the user must press the power button on the control panel to resume shredding.
JAM PROOF SYSTEM*
Eliminates paper jams and powers through tough jobs
DISABLING THE FEATURE
17
3
3
5
2
4
3
6
1
7
AUTO
Should you choose to disable the Once disabled, the blue
system, press and hold the auto Auto light is no longer
Shredding can continue with the
system disabled, however a paper
If jam occurs, press and hold
forward ( ) key until the
If not cleared, press reverse
If steps 4 and 5 do not clear
jam, reverse paper all the way
out, remove several sheets
and refeed
(
) briefly (repeat steps
button (blue) and reverse (
)
illuminated (To re-engage, jam may occur with too many sheets document is completely through
4 and 5 until shredded)
key at the same time
repeat step 1)
and Remove Paper icon
will illuminate
(
)
the shredder
* 100% Jam Proof when used in accordance with user manual
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED PRODUCT WARRANTY
Limited Warranty: Fellowes, Inc. (“Fellowes”) warrants the parts of the machine to be free of Fellowes to provide parts or services outside of the country where the shredder is initially sold
defects in material and workmanship and provides service and support for 2 years from the date by an authorized reseller. ANY IMPLIED WARRANTY, INCLUDING THAT OF MERCHANTABILITY OR
of purchase by the original consumer. Fellowes warrants the cutting blades of the machine to be FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION TO THE APPROPRIATE
free from defects in material and workmanship for the lifetime of the shredder. If any part is WARRANTY PERIOD SET FORTH ABOVE. In no event shall Fellowes be liable for any consequential
found to be defective during the warranty period, your sole and exclusive remedy will be repair or incidental damages attributable to this product. This warranty gives you specific legal rights.
or replacement, at Fellowes’ option and expense, of the defective part. This warranty does not The duration, terms, and conditions of this warranty are valid worldwide, except where different
apply in cases of abuse, mishandling, failure to comply with product usage standards, shredder limitations, restrictions, or conditions may be required by local law. For more details or to obtain
operation using an improper power supply (other than listed on the label), or unauthorized service under this warranty, please contact us or your dealer.
repair. Fellowes reserves the right to charge the consumers for any additional costs incurred by
Download from Www.Somanuals.com. All Manuals Search And Download.
®
POWERSHRED 99Ci
Questions or Concerns?
Customer Service & Support
Troubleshooting
Troubleshooting
Registration
Replacement parts
General questions
Manuals
Canada
Mexico
+1-800-665-4339
+1-800-234-1185
+1-800-955-0959
United States
©2011 Fellowes, Inc. Part No. 406775
Download from Www.Somanuals.com. All Manuals Search And Download.
|