Fagor America Clothes Dryer SFA 8CELX User Manual

EN  
INSTALLATION & OPERATING INSTRUCTIONS  
FR  
GUIDE D’INSTALLATION & D’UTILISATION  
Condenser tumble dryer  
Sèche-linge à condenseur  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
EN  
1 / FOR THE USER’S ATTENTION  
1 / FOR THE USER’S ATTENTION  
— Substances contained in soiling such as oil, acetone, alcohol, petrol, kerosene, stain removers,  
turpentine or wax must be removed before drying in your machine (by using an adapted warm water  
washing programme with additional detergent for example).  
— Precautions for using stain-removing products : any preliminary treatment by solvent, stain-remo-  
ver, aerosol, such as acetone, alcohol, gasoline, kerosene, térébentine is prohibited because these  
products are very inflammable. If your laundry requires this type of treatment, this must be done  
before washing. Similarly, we recommend that you do not use these products near to the dryer or,  
in general, near any electrical appliance in a poorly ventilated room in order to avoid any risk of an  
explosion.  
Important :  
Children’s safety  
— This appliance must only be used by adults.  
Do not let children play with the appliance and  
keep pets away from it.  
Keep these operating instructions with  
your appliance. If you should sell your  
machine or give it to someone else, ensure  
that the operating instructions are provided.  
Please take note of these safety instructions  
before installing and using your appliance.  
They have been written for your safety and  
that of others.  
Keep young children away from the  
appliance when it is operating.  
— Keep the packaging materials out of chil-  
dren’s reach (e.g.: plastic bags, polystyrene,  
etc.) because they can be dangerous for chil-  
dren : risk of suffocation.  
— If any incidents occur, which you cannot resolve using the troubleshooting advice we provide (see  
“TROUBLESHOOTING”), contact our Technical Service Center.  
— This appliance is not intended for use by per-  
sons (including children) with reduced physi-  
cal, sensory or mental capabilities, or lack of  
experience and knowledge, unless they are  
supervised or instructed concerning use of  
the appliance by the person responsible for  
their safety.  
— Before disposing of your worn-out appliance, make it unusable. Unplug and cut off the power  
cable flush with the appliance and make the door lock inoperable.  
— For your safety’s sake, if you wish to change your appliance’s power cable, contact a qualified  
electrician.  
SAFETY INSTRUCTIONS  
Installation  
— When you receive the appliance, unpack it or  
have it unpacked immediately. Check that it  
has not suffered any damage during trans-  
port. Express any reservations in writing on  
the delivery slip and keep a copy.  
If any operating anomalies occur, disconnect your appliance and call our Technical Service  
Center.  
Never connect a damaged appliance.  
If your appliance is damaged, please contact  
your dealer.  
— Before connecting your appliance, please  
refer to the installation instructions.  
— Your tumble dryer must be kept disconnec-  
ted from the mains supply throughout the  
whole installation process.  
— The electrical connection details shown on  
your appliance’s information plate must match  
those of the local mains supply.  
— Once your appliance has been installed, the  
electrical plug must remain accessible.  
— Do not alter or try to alter the appliance’s  
characteristics. This could be dangerous.  
— If your installation requires alteration, only  
entrust the electrical and plumbing work to  
qualified electricians and plumbers.  
— The appliance must not be installed behind a  
locking door, a sliding door or a door with hin-  
ges on the opposite side to those on the dryer.  
— Your appliance is designed for normal  
domestic use. Do not use it for commercial or  
industrial purposes or for any purpose other  
than the one for which it has been designed  
Use  
Important :  
Your tumble dryer is designed for  
domestic use only, for drying textiles suitable  
for tumble drying.  
•ENERGY SAVINGS  
— Spin your textiles at high speeds ; the residual dampness will be low, as will your energy  
consumption. Even synthetic textiles must be spun before drying.  
— Place the maximum load in your machine ; this will optimize the energy used. When doing so,  
comply with the indications on volume provided in this instruction manual.  
— The drying time and the energy consumption are both increased by a high ambient temperature  
and too small a room.  
Important :  
You must observe the following instruc-  
tions. We decline any responsibility and res-  
cind the guarantee if these recommendations  
are ignored : failure to observe them can  
result in material damage and physical injury.  
— Clean the filter after each drying cycle.  
— Clean the condenser twice a month.  
— Use your appliance in accordance with its  
method of use, thereby avoiding injury to your-  
self and damage to your items. Do not use sol-  
vents in the appliance (risk of fire and explo-  
sion).  
— Strictly comply with the care instructions on  
your laundry.  
— If you have to open the door of the drum  
during the drying cycle, ensure that you do not  
touch the drum immediately, as it is very hot.  
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
EN  
2 / DESCRIPTION OF YOUR APPLIANCE  
3 / INSTALLING YOUR TUMBLE DRYER  
• GENERAL PRESENTATION OF THE TUMBLE DRYER  
• THE APPLIANCE’S SURROUNDINGS  
Advice :  
Your tumble dryer releases heat. If you place it next to another appliance or a unit, we  
advise you always to leave a space in-between to assist in air circulation (Fig. 02).  
Important :  
B
0.4 inches minimum  
i  
We strongly advise against :  
— Installing your appliance on a carpeted floor.  
If you cannot avoid this, take all possible mea-  
sures not to obstruct the circulation of air at  
A
its base.  
— Installing your dryer in a location where it  
can be subject to being splashed with water.  
— Installing your dryer in a small closed room  
(if this is the case, open the door or the win-  
dow during drying)  
— Installing your dryer in a poorly ventilated  
room. The temperature in the room must  
remain below 30°C during drying.  
E
D
Fig. 02  
C
• LEVELLING  
F
Fig. 01  
Important :  
Use a level to check that the appliance  
is horizontal :  
A
B
C
D
E
Control panel  
Filter  
Your dryer is fitted with 4 adjustable feet  
(Fig.03). To adjust the stability and levelness :  
— Tip it slightly backwards  
— Screw one or more of the feet in or out using  
a spanner or a screwdriver to adjust their  
height to suit the shape of the floor (Fig.03)  
— Set your dryer back on its feet and check  
that it is stable.  
Condensate container  
Condenser grill  
Information plate (Reference for  
After-Sales)  
F
Adjustable feet  
Fig. 03  
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
EN  
3 / INSTALLING YOUR TUMBLE DRYER  
3 / INSTALLING YOUR TUMBLE DRYER  
• COMBINED WASHER/DRYER INSTALLATION  
• IMPORTANT SAFETY INSTRUCTIONS  
An adaptation kit is available from your dealer. This is used to mount your tumble dryer above your  
washing machine.  
Grounding instructions  
— This appliance must be grounded. In the event of malfunction or breakdown, grounding will  
reduce the risk of electric shock by providing a path of least resistance for electric current.  
— This appliance is equipped with a cord having an equipment-grounding conductor and a groun-  
ding plug. The plug must be plugged into an appropriate outlet that is properly installed and groun-  
ded in accordance with all local codes and ordinances.  
Important :  
Check with your dealer that the kit is compatible with your washing machine. For safety rea-  
sons, fitting must be performed by a qualified professional.  
WARNING :  
Improper connection of the equipment-grounding conductor can result in a risk of electric  
shock. Check with a qualified electrician or service representative or personnel if you are in  
doubt as to whether the appliance is properly grounded.  
Do not modify the plug provided with the appliance: if it will not fit the outlet, have a proper out-  
let installed by a qualified electrician.  
• MODIFYING THE DOOR OPENING DIRECTION  
If you wish, you can alter the direction the door opens as follows (Fig. 04 or 05).  
SAVE THESE INSTRUCTIONS  
A
B
— Remove the 4 screws in the front panel holding the hinges  
and  
.
A
— Reverse the hinge  
and fasten it back on.  
A
— Refit the door on the hinge  
.
B
— Reverse the hinge  
and fasten it back on.  
F
E
— Reverse the positions of the lock  
— Reverse the positions of the bolt  
and the cover  
on the machine’s front.  
C
.
E
F
E
F
• BUILT-IN INSTALLATION  
B
A
C
C
Important :  
If you are fitting the appliance underneath a worktop, you must either keep the original  
laminated top, or replace it with a slimmer version using a kit available for this purpose from your  
dealer. For safety reasons, the appliance must never be operated without a top.  
B
A
Right-hand door  
Left-hand Door  
Fig. 05  
Fig. 04  
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
EN  
3 / INSTALLING YOUR TUMBLE DRYER  
4 / PREPARING YOUR ITEMS  
• CHECKING THE CONDITION OF YOUR TEXTILES  
• ELECTRICAL CONNECTION  
The dryer must be installed in accordance with all local codes or, in the absence of a local code :  
— in the U.S.A., in accordance with the National Electric Code, ANSI/NFPA 70 - latest edition/State  
and Municipal codes and/or local codes.  
— in Canada, in accordance with the Canadianl Electric Code, C22.1 - latest edition/Provincial and  
Municipal codes and/or local codes.  
Advice :  
Important :  
If, before you insert your clothes in the  
tumble dryer, you notice any stains, even  
after washing, do not dry the items concer-  
ned. As a general rule, stains that have been  
ironed or tumble-dried can no longer be  
removed.  
Do not tumble-dry the following  
articles :  
— Clothing including rubber like materials (for  
example: shower caps, waterproof clothing  
and textiles, linings, pillows etc.)  
— Chlorofibres (Thermolactyl* for example)  
*Registered trademark  
Danger :  
Please refer to the instructions for treating  
stubborn stains provided in most washing  
machine instruction manuals and, in particu-  
lar, wash the stained items again.  
To make the electrical connection to your appliance :  
— Do not use an extension, an adapter, a multiple socket or a programmable timer.  
— The plug must be easily accessible but be out of children’s reach.  
— If there's any doubt about the condition of your installation, contact your installer or a qualified  
Brandt-approved professional.  
— Items containing underwiring that could  
become detached  
— Bulky items (duvets, eiderdowns, etc...)  
— Laundry that has not been spun  
— Laundry cleaned with inflammable chemi-  
cals.  
— Never eliminate the electrical Earthing system.  
Preparing your items :  
— Close all zippers and snap buttons.  
— Remove any loose buttons, pins or hook  
fasteners.  
The Dryer comes with a 16AWG Cord and NEMA 6-15P plug  
It should be connected to a 240V, 15A, 60Hz AC 2 Phases + wire grounding power outlet (NEMA  
6-15R) is necessary.  
Important :  
Check the labels on your textiles  
— Knot any belts, apron strings, etc...  
— Empty pockets.  
Gentle  
drying  
Normal  
drying  
— Always adhere to the manufacturer's ins-  
tructions when using softening products.  
We cannot be held responsible for any incident caused by poor electrical installation.  
Do not tumble dry  
• REPLACING THE ELECTRIC POWER CABLE  
• INSERTING YOUR ITEMS IN THE DRUM  
Important :  
To ensure your safety, this must be carried out by the manufacturer's after-sales service  
team or a qualified professional.  
— Open the door by pushing (press where the  
label is) (Fig. 06).  
— Check that the filter is in its housing .  
— Insert washed and spun clothes loosely in  
the drum without folding it or piling it up.  
— Take care not to let any fabrics get caught in  
the door.  
Advice :  
In order to easily find your appliance’s reference numbers in the future, we recommend  
that you note them down on the “After-Sales Service and Consumer Relations” page (this page  
also explains where to find these on your appliance).  
— Close the door.  
Your appliance complies with UL 2158 (Electric clothes Dryer).  
Recommended volumes :  
The maximum capacity of the dryer is 8 kg.  
— To reduce creasing and optimize drying  
times, we recommend you do not overload  
the machine.  
Fig. 06  
10  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
EN  
5 / OPERATING INSTRUCTIONS AND PROGRAMMING  
5 / OPERATING INSTRUCTIONS AND PROGRAMMING  
WARNING :  
• Delaying a program’s start :  
To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY  
Select your program using the program dial  
Time remaining until drying cycle begins  
A
INSTRUCTIONS before operating this appliance.  
. The indicator light shows you the program  
you have selected.  
Press the ”Delay timer +” button  
Pause  
Stop  
Delayed start  
+
F
to delay  
• PRESENTATION OF THE CONTROL PANEL  
-
the start of your program thirty minutes at a  
time until you reach the desired delay time  
(max 23 ½ hours). To decrease the differed  
starting time, press the “Delay timer -” button  
E
.
Pause  
Stop  
+
-
Confirm by pressing the “Start/Pause” button  
G
.
The display shows you how much time  
remains before your program starts.  
Once the time delay has expired, the program  
actually starts. The screen tells you the time  
remaining, which becomes more precise as  
the drying cycle progresses.  
A
B
C
D
E F G  
H
A
B
C
D
E
F
Programs dial  
Anti-creasing  
Beeper  
Delay timer “-”  
Delay timer “+”  
Start/Pause  
On/Off  
• Adding or removing an item during  
G
H
drying :  
G
Program stop  
Extra drying time  
Press “Start/Pause”  
to interrupt drying or  
Pause  
Stop  
open the door.  
+
Time remaining  
Insert or remove the item or items and close the  
door.  
-
• PROGRAMMING A DRYING CYCLE  
G
Press the “Start/Pause” button  
to resume  
drying.  
• Starting the appliance :  
Check that the power cable is plugged in. The  
appliance will not start unless the door is pro-  
perly closed.  
Program progress  
Time remaining  
Pause  
Stop  
+
-
• Altering programming or drying  
during operation :  
H
Press the “On/Off” button  
.
If you have entered the wrong program, you  
can change your selection during the cycle.  
G
Select your program (see the table “Your  
dryer’s programs” on the following pages) by  
A
Press “Start/Pause”  
to interrupt drying.  
turning the programs dial  
(it turns in both  
Select another program using the program  
directions). The indicator light shows you the  
dial.  
program you have selected.  
G
G
Press the “Start/Pause” button  
to resume  
Press “Start/Pause”  
and the program will  
drying.  
start.  
The screen tells you the time remaining,  
which becomes more precise as the drying  
cycle progresses.  
• “ MEMO ACTIV’ ” function :  
Your dryer remembers the programs that you  
use most often.  
After a few drying cycles, the program dis-  
played when you switch on your machine is the  
one that you have used most often.  
Advice :  
Consult the Programs table on the next page to determine the program needed for the  
type of items being dried.  
12  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
EN  
5 / OPERATING INSTRUCTIONS AND PROGRAMMING  
5 / OPERATING INSTRUCTIONS AND PROGRAMMING  
• Stopping the appliance :  
• Cooling cycle :  
At the end of the program, the “Filter”  
End of program  
All programs finish with a cooling cycle that  
lasts for a few minutes to allow the washing to  
cool gradually.  
Cooling cycle  
Pause  
Stop  
+
and “Tank Full”  
lights flash alternately  
Pause  
Stop  
+
-
to remind you that you must clean the filter  
and empty the water collection tank after  
every drying cycle :  
-
Important :  
H
Press the “On/Off”button  
and empty your  
The “Filter” and “Tank Full” lights flash  
Do not stop your dryer before this cycle  
has finished.  
drier.  
Clean the filter and empty the water collec-  
tion tank (see the “REGULAR MAINTE-  
NANCE” section).  
• During the cycle :  
Your tank is full during the drying cycle.  
The appliance stops during the program.  
Program stop  
Pause  
Stop  
+
• “Anti-creasing” option :  
The “Tank Full”  
and “Pause” turns on, the  
-
The “Anti-creasing” option fluffs the textiles  
every 10 minutes for up to 24 hours, until the  
door is opened or the machine is turned off.  
It begins as soon as the drying finishes and  
prevents the clothes from settling in the  
machine. To select this function, press the  
“Anti-creasing” option  
time remaining flashes.  
Pause  
Stop  
+
Proceed to empty your water collection tank  
(see the “REGULAR MAINTENANCE” sec-  
tion).  
Press “Start/Pause”  
gram.  
The ”Tank Full” light illuminates.  
-
G
to restart your pro-  
B
“Anti-creasing”  
. An indicator lights up to  
show that this option has been activated.  
• “Beeper” option :  
C
Press the “Buzzer” button  
. At the end of  
“Beeper” option  
Pause  
Stop  
drying, three beeps will sound every 10 minu-  
tes for one hour until the door is opened or  
the appliance is stopped. The indicator light  
corresponding to this option lights up at the  
bottom of the screen, indicating that the buz-  
zer is activated.  
-
Important :  
A power failure cancels the current program. In this case, you have to reset all the pro-  
gramming operations.  
Advice :  
• “Additional Drying” option :  
As a safety measure, you are advised to unplug the power cable when you are not using  
This function enables you to add drying time  
at the end of a program in units of 10 minutes  
by successively pressing the “Extra Drying  
Additional time  
Pause  
Stop  
the appliance.  
+
-
D
Time” button  
.
Press the “Start/Pause” button. The additio-  
nal drying time is added at the end of the  
selected program.  
Remarks :  
The “Anti-creasing” and "Beeper" options remains selected from one program to the next. You  
can simply press the button to deactivate these options, even during a program.  
14  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
EN  
5 / OPERATING INSTRUCTIONS AND PROGRAMMING  
6 / USER-MAINTENANCE INSTRUCTIONS  
• YOUR DRIER’S PROGRAMS  
• CLEANING THE FILTER  
Important :  
Please remember that the filter must  
Regular programs  
COTTON  
Type of textile  
Drying results  
be cleaned after every drying.  
Fig. 07  
Fig. 08  
Fig. 09  
Fig. 10  
The filter is located in the lower part of your  
dryer.  
Clean it as follows:  
— Remove it from its housing by pulling it  
upwards (Fig. 07)  
— Open the filter (Fig. 08)  
Extra Dry  
Cotton  
Cotton  
Cotton  
Cotton  
Dry  
Dry  
Dry  
Damp Dry  
Slightly damp  
Damp  
— Clean it by removing the thin coating of fluff  
covering it (Fig. 09)  
Heavy Duty  
REGULAR TEXTILES  
Dry  
Ensure that there is no fluff accumulating  
round the dryer.  
Regular textiles  
Regular textiles  
Dry  
Important :  
Damp Dry  
Slightly damp  
Do not wash filter with water (Fig. 10).  
— Re-insert it in its housing, pushing it well in.  
Other drying programs  
Synthetic,  
easy iron  
Permanent Press  
Delicates  
Dry  
Dry  
Dry  
Delicate, synthetic  
Very delicate: silk, light  
synthetic lingerie ...  
• EMPTYING THE CONDENSATION  
CONTAINER  
Ultra Delicates  
Refreshing and airing your textiles after prolonged storage  
This is located at the top of your appliance. It  
collects the water extracted from your items  
as they are dried.  
— To empty it, release it from its housing by  
pulling it towards you (Fig. 11).  
Air Dry  
Other textiles  
15 minutes  
6 minutes  
Air Dry - Wool  
Woollens already dry  
Fig. 11  
Important :  
The condensation container must be  
emptied after each drying cycle (Fig.12).  
Important :  
Risk of frost : if there is a risk of frost,  
empty the condensation container.  
Important :  
Moving the appliance : empty the  
condensation container if you wish to move  
or tilt your appliance.  
Fig. 12  
— Empty the container (Fig. 12).  
16  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
EN  
6 / USER-MAINTENANCE INSTRUCTIONS  
6 / USER-MAINTENANCE INSTRUCTIONS  
• CLEANING THE CONDENSER  
• DIRECT EVACUATION OF WATER CONDENSER  
To avoid having to empty the collection tank every  
time you use the appliance, you have a kit (*) for  
removing the water from the condenser directly into  
the drain (hose and deflector). To fit this :  
— Take off the existing pipe and push it inside the  
appliance (Fig. 13).  
— Clip the deflector with the top of the pump (Fig. 14).  
— Connect the hose from the kit to the end connector  
on the appliance (Fig. 15)  
Important :  
The condenser must be cleaned twice a  
month.  
Important :  
Unplug the power cable from the socket  
before cleaning the condenser.  
Fig. 18  
Fig. 19  
Fig. 20  
— Open the grill at the front of the appliance.  
— Release the condenser (Fig.18).  
— Remove it carefully (Fig.19).  
Fig. 13  
— Remove any fluff from the condenser.  
— Clean it with water only under the tap (Fig.20).  
— After cleaning, ensure that none of the tubes are  
“blocked” and that the fins are clean.  
— Rub it superficially.  
You can connect the other end of the hose either :  
- To a ventilated trap (Fig. 16).  
- Or a sink trap (Fig. 17).  
When connecting to a trap, you must remove the fil-  
ler plug. Then press home the rubber tip. If neces-  
sary, add a clamp connection (Fig. 17).  
— Re-insert the condenser and lock it in place. Close  
the grill.  
Fig. 14  
Important :  
The deflector must be positioned before the  
drain hose connection to avoid any water splashes  
when taking off the hose.  
Important :  
When refitting the condenser, ensure that it is pushed in firmly right to the back of its hou-  
sing when locking it in  
Fig. 15  
• CLEANING THE APPLIANCE  
Remarks :  
(*) This kit is provided with the appliance  
or is available near your After-sales service  
under the ref. 57X3184 (according to model).  
Advice :  
To clean the control panel, the access to the  
drum and the casing, use only a sponge or a damp  
cloth and some soapy water.  
Hose  
— Ensure that there is no fluff accumulating round  
the dryer.  
— Clean the door seal with a damp cloth.  
— Clean the filter housing with your vacuum cleaner  
once a year.  
Fig. 16  
Deflector  
Insert  
Fig. 21  
You should not use, under any circumstances (Fig  
21) :  
— Abrasive powders  
— Metal or plastic sponges  
— Alcohol-based products (alcohol, thinners, etc.)  
Fig. 17  
18  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
EN  
7 / TROUBLESHOOTING  
8 / AFTER-SALES SERVICE  
Advice :  
INTERVENTIONS  
Some incidents may arise when you are using your dryer. Here are the points you should  
check.  
Any work on your appliance must be perfor-  
med by a brand approved qualified professio-  
nal. When you call, mention your appliance’s  
full reference (model, type, serial number).  
These details are shown on the manufacturer’s  
information plate (Fig. 22).  
ORIGINAL PARTS  
During any maintenance work, ask that only  
certified original replacement parts be used.  
Fault :  
Check whether :  
- The plug is in the socket  
- The On/Off button is pressed in  
- The door is properly closed  
The dryer does not start :  
- The condenser is correctly locked in place.  
- The filter in the drum is clogged with fluff  
- The laundry has been spun enough beforehand  
(500rpm minimum, but spinning at 850rpm provides  
better drying times)  
The drying times are too long :  
- The condenser is not clogged.  
- The air inlets and outlets are unobstructed enough to  
ensure correct air circulation.  
- The drying program selected matches the type of  
items in the drum.  
- The filter in the drum is clogged with fluff  
- The type of drying has been selected correctly (too  
low) : switch to the next programme up or increase  
the drying time.  
The laundry is too damp :  
- The condenser is not blocked by fluff.  
Fig. 22  
- The drying time selected is too long : the drying time  
is better to be too short than too long: this avoids the  
laundry becoming too dry and difficult to iron.  
The laundry is too dry, too creased :  
The items are unevenly dried :  
• CHANGING THE BULB  
- The types of textiles in the load are too different (e.g.  
sheets together with jeans)  
- The laundry has been laid correctly ‘unfolded’ in the  
dryer  
You can replace the light bulb (type E14-  
15W/230V) yourself (Fig. 23).  
- The drum is not overloaded.  
Important :  
Unplug the power cord before chan-  
ging the bulb.  
- The laundry has been dried too much  
- You have used softener during washing. By using this  
product, you can reduce most of the problems with  
static electricity.  
The synthetic items are loaded with  
static electricity :  
To do this :  
— Unscrew the glass cover located to the left  
inside the appliance.  
— Unscrew the extinguished bulb and replace it.  
— Screw on the glass cover tightly.  
The “Tank Full” indicator light is lit :  
- The condensate container is full : once you have emp-  
tied it, re-insert it correctly, pushing it completely into  
its housing  
The “Tank Full” indicator light illumina- - Check whether the container has been properly inser-  
Fig. 23  
tes although the tank is empty :  
ted: push it in completely.  
Important :  
- Check if the condenser is tightly locked on the two  
sides.  
The bulb must be replaced when the  
appliance is cooled down.  
20  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SFA-8CE - SFA-8CELX  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Edimax Technology Network Router AR 7186WNB User Manual
Electro Voice Microphone PL6 User Manual
Fisher Price Motorized Toy Car 74765 User Manual
FMI Indoor Fireplace VGL36PN User Manual
Frigidaire Double Oven CFEF3012P W B User Manual
Fujitsu Printer DL3750+ 3850+ User Manual
GE Dehumidifier ADEW30 User Manual
GE Range ZGU364LRPSS User Manual
GE Water Dispenser GXCF20E User Manual
Gigabyte Computer Hardware GV R487D5 1GD User Manual