FUNAI VCR MFV260C User Manual

OWNER’S  
MANUAL  
VIDEO CASSETTE  
PLAYER  
MFV260C  
If you need additional  
operating assistance after  
reading this owner's manual  
or to order replacement  
accessories, please call  
TOLL FREE : 1-800-242-7158.  
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,  
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.  
WARNING:  
The lightning flash with arrowhead symbol, within  
CAUTION  
an equilateral triangle, is intended to alert the user  
to the presence of uninsulated "dangerous voltage"  
within the product's enclosure that may be of suffi-  
cient magnitude to constitute a risk of electric  
shock to persons.  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION: TO REDUCE THE RISK OF ELECTRIC  
SHOCK, DO NOT REMOVE COVER (OR BACK).  
NO USER SERVICEABLE PARTS INSIDE. REFER  
SERVICING TO QUALIFIED SERVICE PERSONNEL.  
The exclamation point within an equilateral triangle  
is intended to alert the user to the presence of impor-  
tant operating and maintenance (servicing) instruc-  
tions in the literature accompanying the product.  
The caution marking is located on the rear of the cabinet.  
IMPORTANT SAFEGUARDS  
1. Read Instructions- All the safety and operating instructions should be  
read before the appliance is operated.  
FIGURE A  
ANTENNA  
2. Retain Instructions- The safety and operating instructions should be  
EXAMPLE OF ANTENNA GROUNDING  
AS PER NATIONAL ELECTRICAL CODE  
LEAD  
WIRE  
retained for future reference.  
3. Heed Warnings- All warnings on the appliance and in the operating  
instructions should be adhered to.  
4. Follow Instructions- All operating and use instructions should be  
followed.  
5. Cleaning- Unplug this video product from the wall outlet before  
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a  
damp cloth for cleaning.  
EXCEPTION: A product that is meant for uninterrupted service and, that  
for some specific reason, such as the possibility of the loss of an  
authorization code for a CATV converter, is not intended to be  
unplugged by the user for cleaning or any other purpose, may exclude  
the reference to unplugging the appliance in the cleaning description  
otherwise required in item 5.  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMP  
NEC – NATIONAL ELECTRICAL CODE  
S2898A  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
6. Attachments- Do not use attachments not recommended by the video  
product manufacturer as they may cause hazards.  
7. Water and Moisture- Do not use this video product near water, for  
example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a  
wet basement, or near a swimming pool, and the like.  
14. Lightning- For added protection for this video product during a lightning  
storm, or when it is left unattended and unused for long periods of time,  
unplug it from the wall outlet and disconnect the antenna or cable  
system. This will prevent damage to the video product due to lightning  
and power-line surges.  
15. Power Lines- An outside antenna system should not be located in the  
vicinity of overhead power lines or other electric light or power circuits, or  
where it can fall into such power lines or circuits. When installing an  
outside antenna system, extreme care should be taken to keep from  
touching such power lines or circuits as contact with them might be fatal.  
8. Accessories- Do not place this video product on an unstable cart,  
stand, tripod, bracket, or table. The video product may fall, causing  
serious injury to a child or adult, and serious damage to the  
appliance. Use only with a cart, stand, tripod, bracket, or  
table recommended by the manufacturer, or sold with the  
video product. Any mounting of the appliance should follow  
the manufacturer's instructions and should use a mounting  
accessory recommended by the manufacturer. An  
16. Overloading- Do not overload wall outlets and extension cords as this  
can result in a risk of fire or electric shock.  
appliance and cart combination should be moved with  
care. Quick stops, excessive force, and uneven surfaces  
may cause the appliance and cart combination to overturn.  
17. Object and Liquid Entry- Never push objects of any kind into this video  
product through any openings as they may touch dangerous voltage  
points or short-out parts that could result in a fire or electric shock. Never  
spill liquid of any kind on the video product.  
18. Servicing- Do not attempt to service this video product yourself as  
opening or removing covers may expose you to dangerous voltage or  
other hazards. Refer all servicing to qualified service personnel.  
19. Damage Requiring Service- Unplug this video product from the wall  
outlet and refer servicing to qualified service personnel under the  
following conditions:  
a. When the power-supply cord or plug is damaged.  
b. If liquid has been spilled, or objects have fallen into the video product.  
c. If the video product has been exposed to rain or water.  
d. If the video product does not operate normally by following the operating  
instructions. Adjust only those controls that are covered by the operating  
instructions as an improper adjustment of other controls may result in  
damage and will often require extensive work by a qualified technician to  
restore the video product to its normal operation.  
9. Ventilation- Slots and openings in the cabinet are provided for  
ventilation and to ensure reliable operation of the video product and to  
protect it from overheating, and these openings must not be blocked or  
covered. The openings should never be blocked by placing the video  
product on a bed, sofa, rug, or other similar surface. This video product  
should not be placed in a built-in installation such as a bookcase or rack  
unless proper ventilation is provided or the manufacturer's instructions  
have been adhered to .  
10. Power Sources- This video product should be operated only from the  
type of power source indicated on the marking label. If you are not sure  
of the type of power supply to your home, consult your appliance dealer  
or local power company. For products intended to operate from battery  
power, or other sources, refer to the operating instructions.  
11. Grounding or Polarization- This video product is equipped with a  
polarized alternating-current line plug (a plug having one blade wider  
than the other). This plug will fit into the power outlet only one way. This  
is a safety feature. If you are unable to insert the plug fully into the outlet,  
try reversing the plug. If the plug should still fail to fit, contact your  
electrician to replace your obsolete outlet. Do not defeat the safety  
purpose of the polarized plug.  
12. Power Cord Protection- Power supply cords should be routed so that  
they are not likely to be walked on or pinched by items placed upon or  
against them, paying particular attention to cords at plugs, convenience  
receptacles, and the point where they exit from the appliance.  
e. If the video product has been dropped or damaged in any way.  
f. When the video product exhibits a distinct change in performance-this  
indicates a need for service.  
20. Replacement Parts- When replacement parts are required, be sure the  
service technician has used replacement parts specified by the  
manufacturer or have the same characteristics as the original part.  
Unauthorized substitutions may result in fire, electric shock or other  
hazards.  
21. Safety Check- Upon completion of any service or repairs to this video  
product, ask the service technician to perform safety checks to  
determine that the video product is in proper operating condition.  
13. Outdoor Antenna Grounding- If an outside antenna or cable system is  
connected to the video product, be sure the antenna or cable system is  
grounded so as to provide some protection against voltage surges and  
built-up static charges. Article 810 of the National Electrical Code,  
ANSI/NFPA No. 70, provides information with regard to proper  
grounding of the mast and supporting structure, grounding of the lead-in  
wire to an antenna discharge unit, size of grounding conductors, location  
of antenna-discharge unit, connection to grounding electrodes, and  
requirements for the grounding electrode. (Fig. A)  
22. Heat- This video product should be situated away from heat sources  
such as radiators, heat registers, stoves, or other products (including  
amplifiers) that produce heat.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DESCRIPTION OF CONTROLS  
Remote Control  
Front Panel  
14  
1
AUDIO  
SELECT  
EJECT  
POWER  
12  
POWER  
AUTO  
PICTURE  
SELECT  
REW F.FWD PLAY STOP/EJECT  
REPEAT  
11  
TRACKING  
AUTO  
AUTO REPEAT  
POWER  
PICTURE COUNTER  
REPEAT SELECT  
RESET  
DISPLAY  
2
9
7
8
10  
9
6
8
7
10  
11  
3
5
4
2
1
PLAY  
STOP  
6
REW  
F.FWD  
3
4
1. Cassette Compartment  
2. STOP/EJECT button  
3. REW button  
7. PICTURE SELECT  
8. Remote Sensor  
9. POWER button  
13  
5
SLOW  
STILL  
4. PLAY button  
10. POWER indicator  
1. POWER button  
5. F.FWD button  
6. AUTO REPEAT button  
11. AUTO REPEAT indicator  
2. DISPLAY button  
3. REW button  
4. STOP button  
5. STILL button  
6. F.FWD button  
7. PLAY button  
Rear Panel  
18 13  
16  
8. COUNTER RESET button  
9. AUTO REPEAT button  
10. PICTURE SELECT button  
11. TRACKING buttons  
12. EJECT button  
ANT IN  
L
CH3  
CH4  
AUDIO  
OUTPUT  
DC 13. 2V  
R
REMOTE  
CONTROL  
TV LINK  
REMOTE  
ANT OUT  
VIDEO  
13. SLOW button  
14. AUDIO SELECT button  
12  
17 14  
19 15  
20  
To insert the batteries  
12. AC Power Cord  
13. AUDIO (L/R) OUT jacks  
14. ANT. IN jack  
17. ANT. OUT jack  
Install two AA batteries matching  
the polarity indicated inside the  
battery compartment.  
18. DC13.2V (12V) supply jack  
19. REMOTE CONTROL jack  
20. TV REMOTE LINK jack  
15. VIDEO OUT jack  
16. CH3/CH4 selector switch  
DISPLAY  
STATUS DISPLAY  
Press [DISPLAY] to display the tape status, real time tape  
counter, and other information on the TV screen. (only on  
the remote control)  
When you press the function buttons or turn on the VCP,  
the status display will appear on the TV screen for 5  
seconds.  
Each time you press this button, TV screen will change as  
shown.  
0:12:34  
<OFF mode>  
<STATUS mode> <COUNTER mode>  
Press  
once  
5 SECONDS  
0:12:34  
0:12:34  
PLAY MODE  
Press once  
REWIND MODE  
FAST FORWARD MODE  
EJECT MODE  
STOP MODE  
EN  
3 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION FOR USE  
USING THE DC CABLE  
1 Check contents  
Make sure the package contains all of the accessories  
listed in "as below".  
1) Connect one end of the DC cable to the 13.2 VOLT  
(12V) DC connector on the back of the VCP.  
2) Connect the other end of the DC cable to your  
vehicles cigarette lighter socket.  
SUPPLIED ACCESSORIES  
ACCESSORIES  
Coaxial Cable  
Remote Control Unit  
Batteries  
PART NO.  
WPZ0901TM002  
NA133UD  
[ Back of the VCP ]  
ANT IN  
CH3  
L
CH4  
AA x 2  
AUDIO  
OUTPUT  
DC 13. 2V  
R
REMOTE  
CONROL  
TV LINK  
REMOTE  
ANT OUT  
VIDEO  
2 Situate VCP  
Place the VCP in a stable, horizontal surface.  
3 Connect VCP to TV  
To a cigarette lighter  
socket  
VCP TO TV CONNECTION  
1. Disconnect the AC power cord of the TV from the AC  
outlet.  
2. Disconnect the antenna or cable from the TV.  
3. Connect the antenna or cable to the ANT. IN jack of  
the VCP.  
DC cable (not supplied)  
4. Connect the VCP to the TV using the coaxial cable.  
5. Plug the AC power cords of the VCP and TV into the  
AC outlets.  
WARNING: The driver should never watch a  
video program while operating a motor vehicle.  
CAUTION: After you finish using the VCP, unplug  
the DC cable from the cigarette lighter socket.  
[VHF/UHF  
[Back of the VCP]  
[Indoor antenna]  
combination antenna]  
[Back of the  
UHF/VHF combination TV]  
Coaxial cable  
(supplied)  
ANT  
IN  
OR  
OR  
NOTES:  
UHF/VHF  
Be sure your vehicle has a 13.2 volt (12V), negative  
ground electrical system.  
[Cable box or satellite box]  
OUT  
IN  
OUT  
From Cable or  
Satellite Company  
Be sure the socket is free of ashes and other debris.  
Be sure to push the DC cable, plug completely into  
the cigarette-lighter socket.  
USING OPTIONAL AUDIO/ VIDEO OUTPUT JACKS  
Disconnect the DC cable from the cigarette-lighter  
socket first, before you unplug it from the VCP.  
With this connection, you can get better pictures and  
sounds when playing back a tape if your TV has A/V  
Input jacks. Please refer to your TVs owners manual.  
You must disconnect the DC cable from the VCP  
before you can use AC power.  
Be sure to replace the fuse on the DC cable with only  
the same type, 5A, 250V.  
REMOTE CONTROL JACK  
You can control the VCP, connect 3.5mm dia. jack of  
Remote Control Sensor Wirebox (not supplied) when  
the VCP locates remote cargo area or behind rear seat.  
Instead of firing at the VCP, you can control its function  
by locating Remote Control Sensor Wirebox where it  
is accessible to signal from remote control unit.  
*You cant use the remote sensor on the front panel of  
the VCP when this jack is occupied.  
SETTING THE CH3/CH4 SWITCH  
If your TV does not have A/V terminals:  
When the VCP is in the Playback mode, your TV will  
receive signals from the VCP on either channel 3 or 4.  
To use the VCP with your TV, set the selector switch to  
CH3 or CH4 (which is located in the back of your VCP),  
whichever is not used for normal broadcasts in your  
area. Then set your TV to the same channel.  
TV REMOTE LINK JACK  
Connect the VCP to the TV (Funai TV) using the TV  
Remote Link cable(not supplied).  
Instead of firing at the VCP, you can control its function  
using remote control sensor on your TV (Funai TV).  
*You cant use the remote sensor on the front panel of  
VCP when this jack is occupied.  
*When you connect both REMOTE CONTROL jack and  
TV REMOTE LINK jack at the same time, REMOTE  
CONTROL jack takes precedence over the TV  
REMOTE LINK jack.  
CH3  
ANT IN  
CH3  
CH4  
CH4  
TV LINK  
REMOTE  
ANT OUT  
[Back of the VCP]  
EN  
4 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYBACK FUNCTION  
Insert the prerecorded tape. The  
VCP will turn on. If the safety tab has  
been removed, the VCP will start  
playback automatically.  
This function enables you to improve the picture quality  
1
when playing back worn cassettes such as rented  
tapes.  
Turn on the TV. Turn on the TV and set the TV  
channel to 3 or 4. Now set the CH3/CH4 switch on  
the back of the VCP to match the channel selected  
on the TV.  
1
Turn on the TV and set the TV to channel 3 or 4.  
Now set the CH3/CH4 switch on the back of the  
VCP to match the channel selected on the TV.  
2
3
Begin playback by pressing [PLAY].  
Insert a prerecorded tape. The VCP will  
automatically turn on and playback will start. If play  
back does not start, press [PLAY].  
2
3
Tracking adjustment will be set automatically (Digital  
Tracking function) when you start playback. To  
adjust the tracking manually, press [TRACKING  
(o/p)] on the remote control.  
When a tape has reached the end, the VCP will  
rewind the tape to the beginning, eject the tape, and  
turn off the VCP automatically.  
To set PICTURE SELECT. Press [PICTURE  
SELECT] repeatedly to select NORMAL or SOFT or  
SHARP. You can see the current setting on the  
display.  
4
To stop playback, press [STOP].  
[NORMAL]  
You can freeze the picture on TV screen by pressing  
[STILL] during playback.  
Usually there will be video "noise" lines (black and  
white streaks or dots) on the screen. This is not a  
fault of the machine but is a by-product of the  
technology involved in producing a 2 Head VCP.  
Only a tape recorded in the SLP mode will show a  
clear picture. You can change position of the noise  
lines on a still picture by pressing [STILL] repeatedly.  
After the VCP has been in Still mode for 5 minutes, it  
will stop automatically to protect the tape and the  
video head.  
4
To stop playback. Press [STOP].  
AUDIO SELECT  
This VCP can playback Hi-Fi stereo sound. Press  
[AUDIO SELECT] to select your desired mode. The  
selected mode is indicated on the TV screen as follows.  
If you play non-Hi-Fi tapes, the VCP will play automatically  
in monaural even if you select one of these mode.  
To return playback, press [PLAY].  
You can advance the picture one frame at a time by  
pressing [STILL] during the still mode.  
If it is left in the Still mode for more than five minutes,  
the VCP will automatically switch to the Stop mode.  
If the picture begins to vibrate vertically during the still  
mode, stabilize the picture by pressing [TRACKING  
(o/p)].  
If the picture is distorted or rolling vertically, adjust the  
vertical hold control on your TV, if equipped.  
B
-1:23:45 HIFI  
B
-1:23:45 L-ch  
AUTO REPEAT PLAYBACK  
This feature allows you to play a tape over and over.  
1 Press [AUTO REPEAT]. THE AUTO REPEAT  
indicator lights up.  
To cancel the auto repeat mode, press [AUTO  
REPEAT] again. The AUTO REPEAT indicator goes  
off.  
B
-1:23:45  
B
-1:23:45 R-ch  
SLOW MOTION  
PICTURE SEARCH  
Press [SLOW] to reduce the playback speed. The VCP  
mutes the sound during slow motion. You can control  
the speed by pressing [F.FWD] (faster) or [REW]  
(slower).  
If you want to skip or repeat a scene during playback,  
press [F.FWD] or [REW].  
Press it again and the VCP will now search in super  
high speed. (in the LP/SLP modes only)  
Press [PLAY] to return to normal playback.  
If it is left in the Slow mode for more than five minutes,  
the VCP will automatically switch to the Stop mode.  
AUTO REWIND  
If the noise bar appears on the TV screen, press  
[TRACKING (o/p)] to reduce it.  
When a tape has reached the end during playback or  
fast-forward, the tape will automatically rewind to the  
beginning. After rewinding finishes, the VCP will eject  
the tape and turn itself to off.  
This function is operative when Auto Repeat Playback  
is set to off.  
EN  
5 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING GUIDE  
If you have followed the instructions contained in this manual and have difficulty in operating your VCP, locate the  
PROBLEM in the left column below. Check the corresponding CORRECTIVE ACTION column to remedy the problem.  
PROBLEM  
No power.  
CORRECTIVE ACTION  
Make sure the power plug is connected to an AC outlet.  
Make sure the DC cord is connected to a 13.2 VOLT (12V) DC cigarette lighter socket.  
Check the fuse on the DC cord.  
Make sure the power is turned on.  
Playback picture is partially noisy. Adjust tracking control for a better picture by pressing [TRACKING o/p].  
Cannot view a tape but the  
Head cleaning may be necessary. Refer to AUTO HEAD CLEANING.  
Make sure the VCP is not in the Menu mode.  
Fine tune your TV.  
.
audio is OK  
No or poor playback picture.  
TV programs cannot be seen  
normally.  
Re-check the ANT. IN and ANT. OUT connections.  
Turn off the VCP.  
No VCP operation from the  
infrared Remote Control.  
Make sure the power plug is connected to an AC outlet.  
Make sure the DC cord is connected to a 13.2 VOLT (12V) DC cigarette lighter socket.  
Check the fuse on the DC cord.  
Check batteries in remote control.  
Head cleaning is necessary. Refer to AUTO HEAD CLEANING.  
Noise in picture on playback.  
SPECIFICATIONS  
Operating temperature :  
Converter output :  
5°C~40°C (41°F~104°F)  
Power requirement :  
Power consumption :  
Dimensions :  
AC120V, 60Hz DC13.2V (12V)  
VHF Channel 3 or 4.  
AC14W  
DC10W  
W 11(280mm)  
H 3-5/8(92mm)  
D 9-13/16(250mm)  
4.4 lbs. (2.0 Kg.) (approx.)  
Designs and specifications are subject to change  
Weight :  
without notice.  
If there is a discrepancy between languages, the  
MAINTENANCE  
SERVICING  
AUTO HEAD CLEANING  
Should your VCP become inoperative, do not try to correct the  
problem by yourself. There are no user-serviceable parts  
inside. Turn off, unplug the power plug, and please call our  
help line at  
Automatically cleans video heads as you insert or remove a  
cassette, so you can see a clear picture.  
Playback picture may become blurred or interrupted while  
the TV program reception is clear. Dirt accumulated on the  
video heads after long periods of use, or the usage of rental  
or worn tapes can cause this problem. If a streaky or snowy  
picture appears during playback, the video heads in your  
VCP may need to be cleaned.  
1-800-242-7158,  
to locate an Authorized Service Center.  
CABINET CLEANING  
1. Please visit your local Audio/Video store and purchase a  
good quality VHS Video Head Cleaner.  
Wipe the front panel and other exterior surfaces of the VCP  
with a soft cloth immersed in lukewarm water and wrung dry.  
Never use a solvent or alcohol. Do not spray insecticide  
liquid near the VCP. Such chemicals may cause damage and  
discoloration to the exposed surfaces.  
2. If a Video Head Cleaner does not solve the problem, please  
call our help line at 1-800-242-7158, to locate an Authorized  
Service Center.  
NOTES:  
Remember to read the instructions included with the video  
head cleaner before use.  
Clean video heads only when problems occur.  
EN  
6 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROLES DE FUNCIONAMIENTO Y FUNCIONES  
Panel frontal  
POWER  
AUTO  
PICTURE  
SELECT  
REW F.FWD PLAY STOP/EJECT  
REPEAT  
AUTO REPEAT  
POWER  
9
6
8
7
10  
11  
3
5
4
2
1
1. Compartimiento del videocasete  
2. Botón de parada/expulsión  
3. Botón de rebobinado  
7. Botón selector para cintas de alquiler  
8. Ventana sensora de la unidad de control  
remoto  
4. Botón de reproducción  
9. Botón de la alimentación  
5. Botón de avance rápido  
6. Botón de reproducción automática  
10. Indicadores de alimentación  
11. Indicadores de reproducción automática  
18 13  
16  
Panel trasero  
ANT IN  
L
CH3  
CH4  
AUDIO  
OUTPUT  
DC 13. 2V  
R
REMOTE  
CONTROL  
TV LINK  
REMOTE  
ANT OUT  
VIDEO  
12  
17 14  
19 15  
20  
12. Cable de alimentación  
17. Terminal de salida de antena  
18. Conector de DC  
19. Conector de Control Remote (REMOTE  
CONTROL)  
13. Terminal de salida de audio  
14. Terminal de entrada de antena  
15. Terminal de salida de vídeo  
16. Conmutador selector de canales CH3/CH4  
20. Conector de REMOTE (TV REMOTE LINK)  
Mando a distancia  
1. Botón de la alimentación (POWER)  
2. Botón de visualizador (DISPLAY)  
3. Botón de rebobinado (REW)  
4. Botón de parada (STOP)  
14  
AUDIO  
SELECT  
EJECT  
POWER  
1
12  
5. Botón de imagen fija (STILL)  
6. Botón de avance rápido (F.FWD)  
7. Botón de reproducción (PLAY)  
8. Botón de reposición del contador (COUNTER  
RESET)  
9. Botón de repetición automática (AUTO  
REPEAT)  
10. Botón selector para cintas de alquiler  
(PICTURE SELECT)  
11  
TRACKING  
AUTO  
PICTURE COUNTER  
REPEAT SELECT  
RESET  
DISPLAY  
2
9
7
8
10  
PLAY  
STOP  
6
REW  
F.FWD  
3
4
13  
5
SLOW  
STILL  
11. Botones de seguimiento (TRACKING)  
12. Botón de expulsión (EJECT)  
13. Botón de cámara lenta (SLOW)  
14. Botón selector de audio (AUDIO SELECT)  
7 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUNAI CORPORATION LIMITED WARRANTY  
Funai Corporation will exchange or repair this product, at its option,  
THIS WARRANTY DOES NOT COVER PACKING MATERIALS,  
ANY ACCESSORIES (EXCEPT REMOTE CONTROL UNITS), ANY  
COSMETIC PARTS, COMPLETE ASSEMBLY PARTS,  
DEMONSTRATION OR FLOOR MODELS.  
in the event of defect in materials or workmanship as follows:  
EXCHANGE DURATION:  
1-90 DAYS:  
FUNAI CORPORATION will exchange for a new unit  
without charge for a period of ninety (90) days from  
the date of original retail purchase.  
FUNAI CORPORATION AND ITS REPRESENTATIVES OR AGENTS  
SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT  
OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR  
OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS  
PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER  
WARRANTIES INCLUDING THE WARRANTY OF MERCHANT  
ABILITY, AND FITNESS FOR A PARTICULAR PURPOSE, THAT  
ARE HEREBY DISCLAIMED BY FUNAI CORPORATION AND ITS  
REPRESENTATIVES OR AGENTS IN THE UNITED STATES.  
91-365 DAYS: FUNAI CORPORATION will exchange for a factory-  
service-to-new-condition unit for a charge of $49.00  
for the period of ninety one (91) days to three  
hundred sixty five (365) days from the date of  
original retail purchase.  
REPAIR DURATION:  
LABOR:  
FUNAI CORPORATION will provide the labor  
without charge for a period of ninety (90) days from  
the date of original retail purchase.  
FUNAI CORPORATION will provide parts to replace  
defective parts without charge for a period of one  
(1) year from the date of original retail  
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE  
PERFORMED BY A FUNAI AUTHORIZED CENTER. THIS  
WARRANTY IS VALID WHEN THE PRODUCT IS DELIVERED  
PREPAID TO A FUNAI AUTHORIZED SERVICE FACILITY.  
PARTS:  
purchase.Two (2) years for Picture Tube. Certain parts are  
excluded from this warranty.  
LIMITS AND EXCLUSIONS:  
IMPORTANT:  
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL  
RIGHTS, YOU MAY HAVE OTHER RIGHTS THAT VARY FROM  
STATE TO STATE, IF AT ANY TIME DURING THE WARRANTY  
PERIOD YOU ARE UNABLE TO OBTAIN SATISFACTION WITH  
THE EXCHANGE OR REPAIR OF THIS PRODUCT, PLEASE  
CONTACT FUNAI CORPORATION.  
This warranty is extended only to the original retail purchaser. A  
purchase receipt or other proof of original retail purchase will be  
required together with the product to obtain exchange or service  
under this warranty.  
This warranty shall not be extended to any other person or  
transferee.  
This warranty is void and of no effect if any serial numbers on the  
product are altered, replaced, defaced or missing. This FUNAI  
CORPORATION Limited warranty applies only to product purchased  
and used in the United States.  
This warranty only covers failures due to defects in material or  
workmanship, which occur during normal use. It does not cover  
damage which occurs in shipment, or failures which are caused by  
repairs, alterations, or parts not supplied by FUNAI CORPORATION,  
or damage which results from accident, misuse, abuse, mishandling,  
misapplication, alteration, faulty installation, improper maintenance,  
commercial use such as hotel, rental or office use of this product, or  
damage which results from fire, flood, lightning or other acts of God.  
ATTENTION:  
FUNAI CORPORATION RESERVES THE RIGHT TO  
MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT  
PRIOR NOTICE.  
For information about your product, or for information on  
how to exchange or repair your product, telephone or  
write to the following:  
FUNAI CORPORATION  
Customer Service  
100 North Street; Teterboro, NJ 07608  
Telephone (800)242-7158  
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.  
Printed in China  
0VMN03091 / HB005UD ꢀꢀꢀꢀꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  

EFJohnson Satellite Radio 002 9800 401 User Manual
Fiesta Gas Grill EZT34535 B303 User Manual
Fisher Paykel Range RA535 Series User Manual
FOCUS Enhancements Camcorder FS 3 User Manual
Frigidaire Beverage Dispenser FFWC38F6LS User Manual
FujiFilm Camcorder 16199188 User Manual
Gateway Flat Panel Television 18 inch LCD TV User Manual
GE Clothes Dryer 364B7130P001 User Manual
Generac Portable Generator RG02515ANAX User Manual
Gianni Industries Door GL 1200 User Manual