FUNAI CRT Television CR320IL8 User Manual
CR320IL8  
TO RECEIVE DIGITAL SIGNAL  
YOU MUST CONNECT ANTENNA  
If you need additional operating assistance after reading this owner's manual or to order  
replacement accessories, please call TOLL FREE : 1-800-474-0045 or visit our  
WEB SITE at http://www.funai-corp.com  
© 2007 Funai Electric Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FIGURE A  
EXAMPLE OF ANTENNA GROUNDING AS PER  
NATIONAL ELECTRICAL CODE  
ANTENNA  
LEAD IN  
WIRE  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
NEC  
-
NATIONAL ELECTRICAL CODE  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
S2898A  
13.OUTDOOR ANTENNA GROUNDING-If an outside anten-  
na or cable system is connected to the TV, be sure the  
antenna or cable system is grounded so as to provide  
some protection against voltage surges and built-up static  
charges. Article 810 of the National Electrical Code,  
ANSI/NFPA No. 70, provides information with respect to  
proper grounding of the mast and supporting structure,  
grounding of the lead-in wire to an antenna discharge unit,  
size of grounding conductors, location of antenna-dis-  
charge unit, connection to grounding electrodes, and  
requirements for the grounding electrode. (Fig. A)  
19.DAMAGE REQUIRING SERVICE-Unplug this TV from the  
wall outlet and refer servicing to qualified service person-  
nel under the following conditions:  
a. When the power supply cord or plug is damaged or  
frayed.  
b. If liquid has been spilled, or objects have fallen into the  
TV.  
c. If the TV has been exposed to rain or water.  
d. If the TV does not operate normally by following the  
operating instructions. Adjust only those controls that  
are covered by the operating instructions, as improper  
adjustment of other controls may result in damage and  
will often require extensive work by a qualified techni-  
cian to restore the TV to its normal operation.  
14.LIGHTNING-For added protection for this TV receiver dur-  
ing a lightning storm, or when it is left unattended and  
unused for long periods of time, unplug it from the wall  
outlet and disconnect the antenna or cable system. This  
will prevent damage to the TV due to lightning and power-  
line surges.  
e. If the TV has been dropped or damaged in any way.  
f. When the TV exhibits a distinct change in performance,  
this indicates a need for service.  
15.POWER LINES-An outside antenna system should not be  
located in the vicinity of overhead power lines or other  
electric light of power circuits, or where it can fall into such  
power lines or circuits. When installing an outside antenna  
system, extreme care should be taken to keep from touch-  
ing such power lines or circuits as contact with them might  
be fatal.  
20.REPLACEMENT PARTS-When replacement parts are  
required, be sure the service technician uses replacement  
parts specified by the manufacturer that have the same  
characteristics as the original part. Unauthorized substitu-  
tions may result in fire, electric shock, injury to persons or  
other hazards.  
16.OVERLOADING-Do not overload wall outlets and exten-  
sion cords as this can result in a risk of fire or electric  
shock.  
21.SAFETY CHECK-Upon completion of any service or  
repairs to this TV, ask the service technician to perform  
routine safety checks to determine that the TV is in proper  
operating condition.  
17.OBJECT AND LIQUID ENTRY-Never push objects of any  
kind into this TV through openings as they may touch dan-  
gerous voltage points or short out parts that could result in  
a fire or electric shock. Never spill liquid of any kind on the  
TV.  
22.HEAT-This TV product should be situated away from heat  
sources such as radiators, heat registers, stoves, or other  
products (including amplifiers) that produce heat.  
18.SERVICING-Do not attempt to service this TV yourself as  
opening or removing covers may expose you to dangerous  
voltage or other hazards. Refer all servicing to qualified  
service personnel.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
SUPPLIED ACCESSORIES  
• Owner’s Manual  
(1EMN22170)  
• Remote control unit  
(NE614UE)  
• Batteries (AA x2) for remote control  
not included.  
• If you need to replace these accessories, please refer to the PART NO. above the illustrations and call our  
help line mentioned on the front page.  
• Depending on your antenna system, you may need different types of Combiners (Mixer) or Separator  
(Splitter). Contact your local electronics store for these items.  
PRECAUTIONS  
• Place your TV in a room with adequate ventilation.  
• Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.  
• Do not place your TV on soft surfaces, such as rugs or blankets.  
• Leave enough room for air to circulate around the bottom, top and back of the set.  
FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications  
to this equipment may cause harmful interference unless the modifications are expressly approved in the  
owner’s manual. The user could lose the authority to operate this equipment if an unauthorized change or  
modification is made.  
RADIO-TV INTERFERENCE  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part  
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference by one or more of the following measures:  
1)Reorient or relocate the receiving antenna.  
2)Increase the separation between the equipment and receiver.  
3)Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
4)Consult the dealer or an experienced radio/TV technician for help.  
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.  
ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE  
DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.  
A NOTE ABOUT RECYCLING: This product’s packaging materials are recyclable and can be reused.  
Please dispose of any materials in accordance with your local recycling regulations.  
Batteries should never be thrown away or incinerated but disposed of in accordance with your local  
regulations concerning chemical wastes.  
Note to CATV system installer:  
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that  
provides guidelines for proper grounding and, in particular, specifies that the cable ground should be  
connected to the grounding system of the building as close to the point of cable entry as practical.  
The serial number of this product may be found on the back of the TV. No others have the same serial num-  
ber as yours. You should record the number and other vital information here and retain this book as a perma-  
nent record of your purchase to aid identification in case of theft.  
Model No.  
Serial No.  
Dealer Purchase from  
Date of Purchase  
Dealer Phone No.  
Dealer Address  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
FEATURES  
• DTV/TV/CATV  
This TV lets you easily switch TV(NTSC) and DTV(ATSC) with the remote control. This feature enables you  
to simply view from conventional analog TV to Standard Definition TV, High Definition TV. You can also con-  
nect this TV to CATV if you have a CATV box.  
• Program Information Display (DTV)  
You can display the title, contents and other information of the current DTV program on the screen.  
• Auto Preset Channel  
This TV can automatically scan and memorize the channels receivable in your residential area. This feature  
eliminates the need of a difficult setting procedure.  
• V-CHIP  
This feature lets you set the viewing limitations to prevent your children from watching inappropriate programs.  
• Closed Caption Decoder  
This TV contains the built-in Closed Caption Decoder that displays text across the screen. It allows you to  
read the dialogue of a TV program or other information in the Closed Caption-supported programs.  
• MTS/SAP Tuner  
This feature allows you to select with the remote control your desired audio language.  
• Auto Shut Off Function  
The power of the unit is automatically turned off when there has been no signal and no key input for more  
than 15 minutes.  
• Sleep Timer  
This feature will automatically turn off the power of the unit at a specific time.  
• On-Screen Function Display (ENGLISH/SPANISH/FRENCH)  
This feature lets you select the language displayed in the MENU screen from ENGLISH, SPANISH or  
FRENCH.  
• Stereo Sound Function  
• Full-Function Remote Control  
• PLL Frequency Synthesized Tuning  
• Flat Screen Picture Tube  
• S-VIDEO Input  
• Front / Rear AV Input  
• Component VIDEO Input  
• Rear Digital Audio Output  
© 2007 Funai Electric Co., Ltd.  
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, tran-  
scribed, downloaded or stored in any storage medium, in any form or for any purpose without the express  
prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any  
revision hereto is strictly prohibited.  
Information in this document is subject to change without notice. Funai reserves the right to change the con-  
tent herein without the obligation to notify any person or organization of such changes.  
with  
is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the  
express written consent of Funai. All other trademarks used herein remain the exclusive property of their  
respective owners. Nothing contained in this manual should be construed as granting, by implication or other-  
wise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any  
other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property  
rights to the fullest extent of the law.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
ONTENTS  
C
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
SUPPLIED ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
2
4
4
5
PREPARATION FOR USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
ANTENNA/BASIC CABLE CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
CONNECTION TO CABLE/SATELLITE BOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
COMPONENT CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
EXTERNAL CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
7
7
8
8
9
USING FRONT A/V CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
DIGITAL AUDIO CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
INSTALLING THE BATTERIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
BATTERY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
REMOTE CONTROL AND CONTROL PANEL FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
WATCHING TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
INITIAL SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
SWITCHING ANALOG MODE/DIGITAL MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
CHANNEL SELECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
VOLUME ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
SWITCHING AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
SCREEN INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
SWITCHING EXTERNAL INPUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
OPTIONAL SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
SLEEP TIMER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
MENU SCREEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
PICTURE ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
CLOSED CAPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
V-CHIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
CHANGING THE SCREEN DISPLAY MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
OTHER SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
AUTO PRESET CH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
CHANNEL ADD/DELETE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
LANGUAGE SELECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
D. S. T. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
TIME ZONE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
MISCELLANEOUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
TROUBLESHOOTING GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back cover  
SYMBOLS USED IN THIS MANUAL  
The following is the description for the symbols used in this manual.  
TV  
: Settings only for the analog mode  
DTV  
: Settings only for the digital mode  
• If there is no symbol under the function heading, those are common settings for the analog  
mode and digital mode.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
REPARATION FOR USE  
P
CONNECTION  
This section describes how to connect this TV to reception and other sources.  
MAKE SURE YOU HAVE AN ANTENNA.  
As DTV is only available over the air, you need an antenna to receive a digital signal.  
[ANTENNA / BASIC CABLE CONNECTION]  
1) When connecting TV to antenna  
Connect the coaxial cable on your home outlet to the ANT. IN jack of this TV.  
2) When connecting TV to basic cable (without box)  
Connect the coaxial cable on your home outlet to the ANT. IN jack of this TV.  
VHF / UHF  
antenna  
Rear of this TV  
Coaxial cable  
(not included)  
or  
VIDEO-1 INPUT  
VID
DIGITAL  
AUDIO OUTPUT  
Y
L
Cb  
Cr  
L
A
N
T
.
I
N
A
UDIO  
INPUT  
S-VIDEO  
R
R
Coaxial cable  
Cable TV  
company  
(not included)  
*Once connections are completed, turn on the TV and begin initial setup.  
Channel scanning is necessary for the TV to memorize all available channels in your area. (Refer to  
“INITIAL SETTINGS” on page 13.)  
NOTES:  
• For your safety and to avoid damages to the unit, unplug the coaxial cable from the ANT. IN jack before moving the unit.  
• If you use an antenna in order to receive analog TV, the same antenna generally will work for DTV reception.  
Outdoor or attic antennas will be more effective than set-top versions.  
• Some cable channels cannot be viewed when the TV is connected to an aerial antenna because DTV program does not cover all  
cable channels. You can watch them by switching to the cable connected to CATV.  
• To easily switch between antenna and cable wires, you can purchase an “Antenna Selector” commercially available.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
[CONNECTION TO CABLE/SATELLITE BOX]  
1) Connect the coaxial cable on your home outlet to the input jack of the CABLE/SATELLITE box.  
2) Use the coaxial cable to connect the ANT. IN jack of this TV and the output jack of the CABLE/SATELLITE  
box.  
*Required cables in 2) and connecting methods differ depending on the CABLE/SATELLITE box. For more  
information, please contact the store where you purchased the CABLE/SATELLITE box or nearby electric  
appliance stores.  
Satellite  
dish  
Cable box or  
Satellite box  
Rear of this TV  
or  
V
I
D
E
O
-
1
I
N
P
U
T
DIGITAL  
AUDIO OUTPUT  
VIDEO  
L
Y
Cb  
Cr  
L
A
N
T
.
I
N
Coaxial cable  
Coaxial cable  
A
UDIO  
S-VIDEO  
INPUT  
R
R
Cable TV  
company  
(not included)  
(not included)  
*If you connect a cable system directly, contact the CATV installer.  
[COMPONENT CONNECTION]  
This is the best method to connect this TV to video devices with the component output jack, such as a DVD  
player, etc. It can minimize the deterioration of image quality.  
Use the component cable (not included) for connection.  
Component video cable  
(not included)  
To COMPONENT INPUT jacks  
To component video  
output jacks  
DVD Player with the component  
video output jacks  
Rear of this TV  
To audio  
output jacks  
To AUDIO  
INPUT jacks  
Audio cable (not included)  
NOTE:  
This TV can only accept a 480i (interlaced) video signal.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
[EXTERNAL CONNECTION]  
When using the Audio/Video cables  
This is the general method to connect this TV to video devices with the video or audio output jacks, such as  
a VCR, etc.  
When the audio jack of video devices is monaural, connect the audio cable to the AUDIO L jack.  
Video cable (not included)  
To VIDEO1  
input jack  
To video  
output jack  
AUDIO VIDEO  
OUT  
OUT  
VCR  
To audio  
output jacks  
Rear of this TV  
To AUDIO  
input jacks  
Audio cable (not included)  
When using the S-Video cable  
This is how to connect this TV to the video devices with the S-VIDEO OUT jack. You can expect better pic-  
ture quality than the normal video cable connection.  
Use the S-Video cable (not included) for connection.  
S-Video cable (not included)  
To S-VIDEO input jack  
To S-Video  
output jack  
AUDIO VIDEO S-VIDEO  
OUT  
OUT  
OUT  
DVD/VCR with the S-Video output jack  
To audio  
output jacks  
Rear of this TV  
Audio cable (not included)  
To AUDIO input jacks  
NOTE:  
If you connect to the S-VIDEO jack and the VIDEO jack at the same time, S-Video connection will have priority.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
[USING FRONT A/V CONNECTION]  
This is how to use the A/V jack in front of this TV and connect to external devices.  
This is useful when you use game playing devices etc.  
When the audio jack of external devices is monaural, connect the audio cable to the AUDIO L jack.  
Video cable (not included)  
Front of this TV  
To video output jack  
Video Camera  
Video Game  
To VIDEO  
input jack  
To audio  
output jacks  
Audio cable (not included)  
To AUDIO input jacks  
[DIGITAL AUDIO CONNECTION]  
If you connect this TV to a digital-supported audio device, you can enjoy much more of the digital broadcast-  
ing programs with the feeling of being at a live program.  
Use the digital audio coaxial cable (not included) for connection.  
Digital audio coaxial cable  
(not included)  
To DIGITAL AUDIO  
OUT jack  
MD deck, DAT deck, etc.  
To coaxial digital  
audio input jack  
Rear of this TV  
Dolby Digital decoder  
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D  
symbol are trademarks of Dolby Laboratories.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
INSTALLING THE BATTERIES  
Install two AA batteries matching the polarity indi-  
cated inside battery compartment of the remote  
control.  
1
2
3
[BATTERY PRECAUTIONS]  
• Be sure to follow the correct polarity as indicated in the battery compartment.  
Reversed batteries may cause damage to the device.  
• Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries with fresh  
ones.  
• If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury  
from possible battery leakage.  
• Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.  
Features of digital broadcasting  
Digital broadcasting uses the newest broadcasting technology such as compression of audio and video  
signals and provides much more improved image and sound quality than analog broadcasting. For image  
quality, digital broadcasting have realized the High Definition Television (HDTV) that can display sharper  
and finer images than Standard Definition Television (SDTV) with double scanning lines, and can adopt  
the 16:9 wide screen format that fits more to range of human vision.  
For audio quality, digital broadcasting offers the multi-channel surround broadcast to give you the feeling  
of being at a stadium or a theater.  
In addition, digital broadcasting enables to broadcast 2 or 3 programs of Standard Definition Television  
(SDTV), which is the analog television format, at the same time by 1 channel. This feature has made the  
program planning more diversified. In addition, digital broadcasting has overcome problems experienced  
with analog television such as ghosting or interference with digital technology.  
Minor channel of digital broadcasting  
In digital broadcasting, the selected channel can have the sub channel. It is called the minor channel.  
Though the minor channel programs provide a little poorer image quality than the High Definition  
Television (HDTV) programs, they have such an advantage as it will not move back other programs even  
when a sport relay is extended.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
UNCTIONS  
F
REMOTE CONTROL AND CONTROL PANEL FUNCTION  
AUDIO button (p16)  
• Analog mode (TV)  
To select audio mode  
• Digital mode (DTV)  
To select audio language  
POWER button  
DTV TV  
POWER  
/
To turn TV on/off  
AUDIO  
INFO  
Number buttons (p15)  
To select channels  
1
4
7
2
5
8
0
3
6
9
DTV/TV button (p15)  
To switch between digital mode (DTV)  
and analog mode  
-/ENT button (p15)  
To confirm the command of  
channel number buttons  
CHANNEL  
RECALL  
–
/ENT  
+
100  
INFO button (p17)  
• Analog mode (TV)  
To display channel No.  
• Digital mode (DTV)  
To display channel information  
K L  
CH  
/
buttons (p13)  
To select channels and move up/down  
through menu items  
CH  
CH  
VOL  
VOL  
MENU button (p19)  
To display on-screen menu  
INPUT  
SELECT  
MENU  
SLEEP  
MUTE  
CHANNEL RECALL button (p15)  
To return to previously viewed channel  
INPUT SELECT button (p18)  
To select TV or external input mode  
(to access camcorders, games, etc.)  
+100 button (p15)  
• CATV  
To enter the channel number for 100  
or higher channels  
• Digital mode (DTV)  
To select the minor channel  
SLEEP button (p19)  
To turn the power off automatically  
at preset time  
MUTE button (p16)  
X Y  
VOL  
/
buttons (p13)  
To adjust volume, and to change settings  
/ to move to next screen for menu items  
MENU button (p19)  
To view on-screen menu  
X Y  
AUDIO L/R input jacks (p10)  
VIDEO input jack (p10)  
VOLUME  
/
buttons (p13)  
To adjust volume  
K L  
/
CHANNEL  
To select channels  
buttons (p13)  
POWER button  
To turn TV on/off  
MENU  
VOLUME  
CHANNEL  
POWER  
VIDEO  
L - AUDIO - R  
VIDEO  
L
-
AUDIO  
-
R
MENU  
VOLUME  
CHANNEL  
POWER  
Infrared Sensor Window  
To receive the infrared rays  
transmitted from the remote  
control  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
ATCHING TV  
W
INITIAL SETTINGS  
1 Select your language.  
This section describes the initial settings when you  
first turn on the power after purchase. The initial  
setting items are shown below.  
When you first turn on the power, the following  
screen is displayed.  
SELECT LANGUAGE  
NOTE:  
K
ENGLISH  
ESPAÑOL DESPUÉS:PRESIONE  
FRANÇAIS APRÈS:PRESSEZ  
NEXT:PRESS  
Be sure that antenna or cable is connected properly before  
plugging the power cord.  
L
X
• LANGUAGE SELECTION  
You can select the menu language displayed on  
the screen among English, Spanish and French.  
• At initial language screen,  
K
press [CH ] for English.  
L
press [CH ] for Spanish.  
• D.S.T. (Daylight Saving Time)  
X
press [VOL ] for French.  
You can set the air time display for digital broad-  
casting. When you set this function to ON, the  
date information adjusted for the area set by TIME  
ZONE will be adjusted to the one added by anoth-  
er 1 hour. In addition, the time difference will be  
adjusted as follows: 2 a.m. on first Sunday in April  
to 3 a.m., 1 hour ahead, and 2 a.m. on last  
The next menu will be displayed in the selected  
language after you press the button.  
X Y  
2 Using [VOL / ], set "D.S.T. (Daylight Saving)"  
to [ON].  
1. PLEASE CONNECT ANTENNA TO  
THE UNIT.  
2. SET UP THE ITEMS WITH  
Sunday in October to 1 a.m., 1 hour behind.  
,
AND BUTTONS.  
• TIME ZONE  
D.S.T. (Daylight Saving)  
TIME ZONE  
[ON]  
[- - -]  
The EPG information in digital broadcasting is  
adjusted based on the area set in TIME ZONE.  
AUTO PRESET CH (TV/DTV)  
AUTO PRESET CH (CATV)  
• AUTO PRESET CH (TV/DTV)  
(When using antenna)  
K L  
3 Using [CH / ], select "TIME ZONE".  
The channels broadcasted in TV and DTV are  
automatically scanned and memorized. Only the  
receivable channels in the area where this TV is  
used will be memorized.  
1. PLEASE CONNECT ANTENNA TO  
THE UNIT.  
2. SET UP THE ITEMS WITH  
,
AND BUTTONS.  
D.S.T. (Daylight Saving)  
TIME ZONE  
[ON]  
[- - -]  
AUTO PRESET CH (TV/DTV)  
AUTO PRESET CH (CATV)  
• AUTO PRESET CH (CATV)  
(When using basic cable)  
The channels broadcasted in CATV are automati-  
cally scanned and memorized.  
X Y  
• Every time you press [VOL / ], the area will  
be switched as below.  
1
4
2
5
8
0
3
6
9
7
/ENT  
CHANNEL  
RECALL  
–
+
100  
K L  
/
CH  
CH  
CH  
VOL  
VOL  
X Y  
/
VOL  
INPUT  
MENU  
SLEEP  
MUTE  
SELECT  
• Set your area.  
NOTE:  
You must set “D.S.T.” and “TIME ZONE” before presetting  
channels.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
4 Set the AUTO PRESET CH.  
NOTES:  
• If "D.S.T. (Daylight Saving)" and "TIME ZONE" is not set,  
you cannot select "AUTO PRESET CH".  
• Make sure if the TV is connected to antenna or cable.  
When antenna is connected, select “AUTO PRESET CH  
(TV/DTV)” at the procedure below. When connected to  
CATV, select “AUTO PRESET CH (CATV)”.  
Here describes the case for searching and  
memorizing channels for TV/DTV.  
K L  
• Using [CH / ], select "AUTO PRESET  
CH(TV/DTV)".  
1. PLEASE CONNECT ANTENNA TO  
THE UNIT.  
2. SET UP THE ITEMS WITH  
,
AND BUTTONS.  
D.S.T. (Daylight Saving)  
TIME ZONE  
[ON]  
[ALASKA]  
AUTO PRESET CH (TV/DTV)  
AUTO PRESET CH (CATV)  
X
• When you press [VOL ], the channel scanning  
in both analog and digital modes will automati-  
cally start.  
53  
AUTO PRESET CH(TV/DTV)  
• When scanning is completed, the lowest mem-  
orized channel will be displayed.  
NOTES:  
• The initial AUTO PRESET CH function can be executed for  
either TV/DTV or CATV only once. If you want to scan both  
TV/DTV and CATV, you need to select "CHANNEL SET" in  
the MENU screen to scan and memorize other channels after  
initial presetting is completed. (Refer to page 28.)  
• You can exit the initial AUTO PRESET menu by pressing  
[MENU].  
• When you press [MENU] while scanning, the scanning is  
interrupted and the lowest memorized channel is displayed.  
• If you press [POWER], the power will be turned off. When  
the scanning is not completed, initial AUTO PRESET CH  
screen is displayed every time you turn on the power.  
• When no channel can be received by AUTO PRESET CH,  
"NO TV SIGNALS" is displayed on the screen.  
NO TV SIGNALS  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
SWITCHING ANALOG MODE / DIGITAL MODE  
CHANNEL SELECTION  
K L  
You can easily switch the TV (NTSC) and DTV  
(ATSC) with the remote control and enjoy viewing the  
High Definition TV programs as well as the Standard  
Definition TV programs with simple operation.  
You can select the channel by using either [CH / ]  
or [the Number buttons]. How to select the channel  
in each way is shown below.  
AUDIO  
INFO  
1
4
7
2
5
8
0
3
6
9
Number  
buttons  
DTV TV  
CHANNEL  
RECALL  
POWER  
/
DTV/ TV  
CHANNEL  
RECALL  
—
/ENT  
AUDIO  
INFO  
+
100  
-/ENT  
K L  
/
CH  
+100  
1
4
2
5
8
0
3
6
9
CH  
CH  
VOL  
VOL  
7
/ENT  
CHANNEL  
RECALL  
–
INPUT  
MENU  
SLEEP  
MUTE  
SELECT  
+
100  
CH  
CH  
VOL  
VOL  
K L  
1 Using [CH / ].  
K L  
• Using [CH / ], change the channel.  
1 Press [DTV/TV] on the remote control.  
• When you press [CHANNEL RECALL], the  
previously selected channel will be selected.  
• The analog mode and digital mode switch alter-  
nately.  
• Same operation is available with [CHANNEL  
• When you press [DTV/TV] in external input,  
the analog mode and digital mode will be  
switched.  
K L  
/ ] on the front panel of the main unit.  
2 Using [the Number buttons].  
NOTE:  
• When you select a channel from 1 to 99, press  
the channel number you want to view with  
[the Number buttons]. The selected channel  
will be displayed.  
When you switch the analog mode to the digital mode, it may  
take a while until the digital channel selection is completed.  
The following screen is displayed while switching the mode.  
• When you select a channel larger than 100, press  
[+100] first. Then use [the Number buttons] to  
press the lower 2 digits.  
NOW SCANNING  
• To search the minor channel of the major chan-  
nel currently viewed in DTV, press [+100]. If you  
know the minor channel while viewing the major  
channel with 1-digit channel number, press the  
major channel number and press [-/ENT]. Then,  
press the minor channel number you want to  
view. In case the major channel number is 2  
digits, press the major channel number and  
press the minor channel number directly. If you  
press [-/ENT] after pressing the 2-digit major  
channel number, the smallest minor channel will  
be selected.  
• When you press [CHANNEL RECALL], the  
previously selected channel will be selected.  
NOTE:  
In the DTV broadcasting, one channel sometimes broadcasts  
multiple programs depending on the air time. In this case, the  
main channel is called major channel and the sub channel is  
called minor channel.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
VOLUME ADJUSTMENT  
SWITCHING AUDIO  
This section describes how to adjust the volume  
when viewing TV. The MUTE function, which is use-  
ful when you have a visitor or a phone call, will be  
also described.  
This section describes how to switch the audio in  
the analog mode and how to switch the audio lan-  
guage in the digital mode.  
1
4
2
5
8
0
3
6
9
DTV TV  
POWER  
/
AUDIO  
INFO  
7
/ENT  
CHANNEL  
RECALL  
–
AUDIO  
+
100  
1
4
7
2
5
8
3
6
9
CH  
CH  
VOL  
VOL  
X Y  
/
VOL  
TV  
INPUT  
MENU  
SLEEP  
MUTE  
SELECT  
MUTE  
1 Switch the audio.  
• Every time you press [AUDIO], the audio will  
be switched as below.  
X Y  
1 Using [VOL / ].  
X Y  
• You can adjust the audio volume with [VOL / ].  
• The volume bar is displayed at the bottom of  
the screen when adjusting the volume.  
• Same operation is available with [VOLUME  
X Y  
/ ] on the front panel of the main unit.  
MAIN : Outputs main-audio  
SAP : Outputs second audio channel  
MONO : Outputs mono-audio  
VOLUME  
DTV  
1 Switch the audio language.  
2 Using [MUTE].  
• When you press [AUDIO], the currently selected  
language and the number of received languages  
will be displayed on the screen.  
• Press [MUTE] on the remote control to mute  
the sound.  
The colored volume bar is displayed on the  
screen while muting.  
KABC  
CH 95-03  
Jay Jay the Jet Plane  
ENGLISH 1/3  
Audio  
language  
11:00AM- 1:00PM  
VOLUME  
• Every time you press [AUDIO], the language  
will be switched.  
• To release the MUTE status, press [MUTE]  
again or press [VOL / ].  
KABC  
Jay Jay the Jet Plane  
SPANISH 2/3  
CH 95-03  
X Y  
11:00AM- 1:00PM  
• Languages you can switch differ depending on  
the receiving broadcast.  
NOTE:  
If you press [AUDIO] in external input, the audio will not be  
switched.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
DTV  
SCREEN INFORMATION  
In the digital mode, the detailed information for the  
currently selected channel such as the program  
guide is displayed.  
You can display the currently selected channel  
number or other information such as the audio  
mode on the screen for checking.  
1 Display the detailed information for the channel.  
• Every time you press [INFO], the display mode  
will be switched as below.  
DTV TV  
POWER  
/
AUDIO  
INFO  
INFO  
1
4
7
2
5
8
0
3
6
9
CHANNEL  
RECALL  
–
/ENT  
+
100  
CH  
CH  
VOL  
VOL  
• The following information is displayed in the  
INFO1 mode.  
TV  
In the analog mode, the currently selected channel  
number and the audio mode are displayed.  
(1) Channel number  
(2) Channel title  
1 Display the channel number and the audio  
(3) Program title (max. 2 lines displayed)  
mode.  
(4) Audio language ("OTHER" is displayed when  
the audio language cannot be acquired, or  
the acquired languages are other than ENG-  
LISH, SPANISH or FRENCH.)  
• Press [INFO] on the remote control.  
The currently selected channel number and the  
audio mode are displayed at the top right of the  
screen.  
(5) Program air time  
CH 10  
STEREO  
(1)  
(5)  
KABC  
AB WORLD  
ENGLISH  
CH 95-03  
(2)  
(3)  
(4)  
11:00AM- 1:00PM  
• To clear the display, press [INFO] again.  
• The program guide added to the displayed  
information in the INFO1 mode is displayed in  
the INFO2 mode.  
• The following screens are displayed when con-  
necting to external devices:  
1) When using video cable for connection  
KABC  
CH 95-03  
AB WORLD  
ENGLISH  
VIDEO 2  
11:00AM- 1:00PM  
We bring you the latest information  
from around the world as quickly as  
possible.  
Program  
guide  
NOTES:  
2) When using component video cable for con-  
nection  
• When the program guide is displayed in more than 6 lines,  
X Y  
use [VOL  
/
] and scroll for reading.  
• "No description provided" is displayed when the program  
guide is not provided.  
COMPONENT  
• While the information is displayed in the INFO2 mode, the  
CLOSED CAPTION function is interrupted.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
SWITCHING EXTERNAL INPUT  
• When you press [INFO], the current external  
input mode will be displayed at the top right of  
the screen.  
When you connect external devices including a  
video cassette recorder and home audio system,  
you can easily switch the input mode with the  
remote control.  
1) When using VIDEO-1 INPUT jack  
VIDEO 1  
1
4
2
5
8
0
3
6
9
7
/ENT  
CHANNEL  
RECALL  
–
+
100  
CH  
CH  
VOL  
VOL  
2) When using VIDEO-2 INPUT jack  
INPUT SELECT  
VIDEO 2  
INPUT  
MENU  
SLEEP  
MUTE  
SELECT  
1 Switch the input mode.  
• When you press [INPUT SELECT] on the  
remote control, the input mode will be switched  
as below.  
3) When using COMPONENT INPUT jacks  
COMPONENT  
4) When using S-VIDEO INPUT jack  
S-VIDEO  
• To use the VIDEO-1 INPUT jack on the rear of  
the TV, select "VIDEO 1".  
(If you use the S-VIDEO jack, "S-VIDEO" is dis-  
played.)  
-
• To use the jack on the front of the TV, select  
"VIDEO 2".  
• To use the COMPONENT INPUT jacks on the  
rear of the TV, select "COMPONENT".  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
PTIONAL SETTINGS  
O
SLEEP TIMER  
MENU SCREEN  
The SLEEP TIMER function will automatically turn  
off the power of the unit at a preset time.  
This section describes the overview of the menu  
screen displayed when you press [MENU]. For  
more details, see the reference page for each item.  
1
4
2
5
8
0
3
6
9
The menu screen consists of the function setting  
items below.  
7
/ENT  
CHANNEL  
RECALL  
–
+
100  
PICTURE  
CH  
CH  
VOL  
VOL  
CHANNEL SET  
[ENG]/ESP/FRA  
V-CHIP SET UP  
CAPTION [OFF]  
DTV SET UP  
SLEEP  
INPUT  
MENU  
SLEEP  
MUTE  
SELECT  
• PICTURE  
1 Use SLEEP TIMER.  
You can adjust the picture quality (BRIGHT, CON-  
TRAST, COLOR, TINT, SHARPNESS).  
• Press [SLEEP] on the remote control.  
(Refer to "PICTURE ADJUSTMENT" on page 20.)  
• The setting display for SLEEP TIMER is shown  
in the screen.  
• CHANNEL SET  
You can automatically scan the receivable chan-  
nels and add or delete the channel as necessary.  
(Refer to "AUTO PRESET CH" on page 28.)  
• ENG/ESP/FRA  
SLEEP 0  
You can change the language (ENGLISH, SPAN-  
ISH, FRENCH) displayed in the menu screen.  
2 Set the timer.  
(Refer to "LANGUAGE SELECTION" on page 31.)  
• V-CHIP SET UP  
• Every time you press [SLEEP], the time  
increases by 10 minutes.  
You can set the viewing limitations.  
(Refer to "V-CHIP" on page 24.)  
• CAPTION  
• You can set the timer up to 90 minutes.  
• After setting, you can check the remained time  
per 1 minute by pressing [SLEEP].  
You can change the display format for CLOSED  
CAPTION, which displays the dialogue of a TV  
program or other information across the screen.  
(Refer to "CLOSED CAPTION" on page 21.)  
DTV  
SLEEP 16  
• DTV SET UP  
You can set the screen display or CAPTION in the  
DTV mode.  
NOTES:  
• When you disconnect the unit from the AC outlet or when a  
power failure occurs, the sleep timer setting will be can-  
celed.  
(Refer to "CHANGING THE SCREEN DISPLAY  
MODE" on page 27.)  
• To cancel the sleep timer, press [SLEEP] repeatedly until  
"SLEEP 0" is displayed.  
NOTES:  
• The Sleep Timer setting display will automatically disappear  
after 10 seconds.  
• "DTV SET UP" can be displayed only in the DTV mode.  
• To move to the normal screen, press [MENU].  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
PICTURE ADJUSTMENT  
3 Adjust the picture quality.  
You can adjust the brightness, contrast, color, tint  
and sharpness of the picture.  
K L  
• Using [CH / ], select the picture quality item  
you want to adjust.  
1
4
2
5
8
0
3
6
9
7
/ENT  
CHANNEL  
RECALL  
–
+
100  
K L  
/
CH  
CH  
CH  
VOL  
VOL  
X Y  
/
VOL  
MENU  
INPUT  
MENU  
SLEEP  
MUTE  
SELECT  
1 Display the menu screen.  
• Press [MENU].  
X Y  
• Using [VOL / ], adjust the picture quality.  
BRIGHT  
The following menu screen is displayed.  
X
: To increase brightness  
Y
: To decrease brightness  
PICTURE  
CHANNEL SET  
[ENG]/ESP/FRA  
V-CHIP SET UP  
CAPTION [OFF]  
DTV SET UP  
CONTRAST  
X
: To increase contrast  
Y
: To decrease contrast  
COLOR  
X
: To brilliant  
2 Select "PICTURE".  
Y
: To pale  
K L  
• Using [CH / ], select "PICTURE" and press  
TINT  
X
[VOL ] to confirm.  
X
: To green  
Y
: To purple  
PICTURE  
CHANNEL SET  
[ENG]/ESP/FRA  
V-CHIP SET UP  
CAPTION [OFF]  
DTV SET UP  
SHARPNESS  
X
: To clear  
Y
: To soft  
NOTES:  
• The display will disappear automatically after 10 seconds  
unless you press a button.  
• The adjustment bar for picture quality item is  
displayed in the screen.  
• Magnetism from nearby appliances and speakers might  
affect the color of the TV picture. If this happens, press  
[POWER] to turn off the TV and turn it on again after about  
30 minutes.  
[-]  
[+]  
BRIGHT  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
CLOSED CAPTION  
• CAPTION2 (C2)  
Displays foreign language closed captions (for-  
eign language words showing what a character  
is saying).  
You can view specially labeled (cc) TV programs,  
movies, news and prerecorded tapes, etc. with  
either a dialogue caption or text display added to  
the program.  
• There are three display modes according to  
programs:  
You can also change the font size and font style of  
the caption in the digital broadcasting.  
Paint-on mode: Displays input characters on the  
screen immediately.  
7
/ENT  
8
0
9
CHANNEL  
RECALL  
–
+
100  
Pop-on mode : Once characters are stored in  
memory, they are displayed all  
at once.  
K L  
/
CH  
CH  
CH  
VOL  
VOL  
X Y  
/
VOL  
Roll-up mode : Displays the characters continu-  
MENU  
INPUT  
MENU  
SLEEP  
MUTE  
SELECT  
ously by scrolling (max. 4 lines).  
[TEXT MODE (T1, T2)]  
• TEXT1 (T1) and TEXT2 (T2) display half-  
screen text by scrolling (such as a channel  
guide, schedule or announcement).  
1 Display the menu screen.  
• Press [MENU].  
The following menu screen is displayed.  
4 To exit the menu, press [MENU].  
NOTES:  
PICTURE  
CHANNEL SET  
[ENG]/ESP/FRA  
V-CHIP SET UP  
CAPTION [OFF]  
DTV SET UP  
• If the closed caption is not broadcasted, nothing is displayed.  
• When your TV receives a special effects playback signal  
(i.e., Search, Slow and Still) from a VCR’s video output  
channel (CH3 or CH4), the TV may not display the correct  
caption or text.  
• Captions and texts may not match the TV voice exactly.  
• Interference may cause the closed caption system not to  
function properly.  
2 Select "CAPTION".  
K L  
• The caption or text characters will not be displayed while the  
menu display or functions display is shown.  
• Using [CH / ], select "CAPTION".  
• If a black box appears on the screen, this means that the  
TV is set to TEXT mode. To clear screen, select CAPTION  
"C1", "C2" or "OFF".  
PICTURE  
CHANNEL SET  
[ENG]/ESP/FRA  
V-CHIP SET UP  
CAPTION [OFF]  
DTV SET UP  
DTV  
3 Switch the CAPTION mode.  
1 Display the menu screen.  
X Y  
• When you press [VOL / ], CAPTION will be  
switched as below.  
• Press [MENU].  
The following menu screen is displayed.  
PICTURE  
CHANNEL SET  
[ENG]/ESP/FRA  
V-CHIP SET UP  
CAPTION [OFF]  
DTV SET UP  
[CAPTION MODE (C1, C2)]  
• CAPTION1 (C1)  
Displays standard closed captions (what a char-  
acter is saying).  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
NOTE:  
2 Select "DTV SET UP".  
CAPTION SERVICE you can switch differs depending on the  
broadcast description.  
K L  
• Using [CH / ], select "DTV SET UP".  
PICTURE  
5 Use "USER SETTING".  
CHANNEL SET  
[ENG]/ESP/FRA  
V-CHIP SET UP  
CAPTION [OFF]  
DTV SET UP  
• The "USER SETTING" function lets you  
change the caption size and font style.  
K L  
• Using [CH / ], select "USER SETTING".  
CAPTION SERVICE [SERVICE1/6]  
X
• Press [VOL ].  
USER SETTING  
CAPTION SIZE  
FONT STYLE  
[OFF]  
[MIDDLE]  
[STYLE1/8]  
The following screen is displayed.  
CHARACTER EDGE [NONE]  
FORE OPACITY  
FORE COLOR  
BACK OPACITY  
BACK COLOR  
[SOLID]  
[WHITE]  
[SOLID]  
[BLACK]  
DTV DISPLAY [LETTERBOX]  
DTVCC  
D.S.T.[Daylight Saving]  
TIME ZONE  
[ON]  
[ALASKA]  
X
• Press [VOL ] and set "USER SETTING" to  
"ON".  
6 Set each item.  
3 Select "DTVCC".  
K L  
• When "USER SETTING" is set to "ON", you  
can set the following items.  
• Using [CH / ], select "DTVCC".  
DTV DISPLAY [LETTERBOX]  
DTVCC  
CAPTION SERVICE [SERVICE1/6]  
USER SETTING  
CAPTION SIZE  
FONT STYLE  
[ON]  
[MIDDLE]  
[STYLE1/8]  
D.S.T.[Daylight Saving]  
[ON]  
TIME ZONE [ALASKA]  
CHARACTER EDGE [NONE]  
FORE OPACITY  
FORE COLOR  
BACK OPACITY  
BACK COLOR  
[SOLID]  
[WHITE]  
[SOLID]  
[BLACK]  
X
• Press [VOL ].  
The following screen is displayed.  
K L  
• Using [CH / ], select the item you want to  
set.  
CAPTION SERVICE [OFF]  
USER SETTING  
CAPTION SIZE  
FONT STYLE  
[OFF]  
[MIDDLE]  
[STYLE1/8]  
• You can switch the setting for each item with  
[VOL / ].  
X Y  
CHARACTER EDGE [NONE]  
FORE OPACITY  
FORE COLOR  
BACK OPACITY  
BACK COLOR  
[SOLID]  
[WHITE]  
[SOLID]  
[BLACK]  
• The setting description for each item is shown  
below.  
[CAPTION SIZE]  
4 Select "CAPTION SERVICE".  
X Y  
• When you press [VOL / ], you can switch  
Text size of the displayed caption can be  
switched as below.  
CAPTION as below. Select CAPTION SERVICE  
you want to use.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
[FORE COLOR]  
[FONT STYLE]  
Text color of the displayed caption can be  
switched as below.  
Font style of the displayed caption can be  
switched as below.  
[CHARACTER EDGE]  
Text edging of the displayed caption can be  
switched as below.  
[BACK OPACITY]  
Background opacity of the displayed caption can  
be switched as below.  
[BACK COLOR]  
Background color of the displayed caption can  
be switched as below.  
[FORE OPACITY]  
Text opacity of the displayed caption can be  
switched as below.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
V-CHIP  
3 Enter the access code.  
You can set the viewing limitations to prevent your  
children from watching inappropriate programs  
including disagreeable expression and description.  
The viewing limitations set for the program can be  
released by entering the access code.  
• Use [the Number buttons] and enter the  
4-digit number.  
• When you have not set up your access code,  
enter 0000.  
• When the access code is correct, the following  
"V-CHIP SET UP" screen is displayed.  
AUDIO  
INFO  
1
4
2
5
8
0
3
6
9
Number  
buttons  
TV RATING  
MPAA RATING  
CHANGE CODE  
A
B
C
7
/ENT  
CHANNEL  
RECALL  
–
+
100  
K L  
/
CH  
CH  
CH  
VOL  
VOL  
X
VOL  
MENU  
INPUT  
MENU  
See the following description for setting each  
item.  
SLEEP  
MUTE  
SELECT  
1 Display the menu screen.  
A
TV RATING  
• Press [MENU].  
The following menu screen is displayed.  
4 Display the "TV RATING" screen.  
K L  
PICTURE  
• Using [CH / ], select "TV RATING".  
CHANNEL SET  
[ENG]/ESP/FRA  
V-CHIP SET UP  
CAPTION [OFF]  
DTV SET UP  
X
Press [VOL ].  
TV RATING  
MPAA RATING  
CHANGE CODE  
2 Select "V-CHIP SET UP".  
K L  
• Using [CH / ], select "V-CHIP SET UP".  
5 Set "TV RATING".  
PICTURE  
CHANNEL SET  
[ENG]/ESP/FRA  
V-CHIP SET UP  
CAPTION [OFF]  
DTV SET UP  
K L  
• Using [CH / ], select the rating.  
TV-Y  
TV-Y7  
TV-G  
[VIEW]  
) [VIEW]  
[VIEW]  
(
TV-PG (  
TV-14  
TV-MA (  
) [VIEW]  
(
)
[VIEW]  
X
• Press [VOL ].  
) [VIEW]  
The access code entry screen is displayed.  
ACCESS CODE  
_ _ _ _  
<Selection>  
• TV-Y :  
• TV-Y7 :  
<Rating Category Explanations>  
Appropriate for all children  
Appropriate for children 7 and  
older  
• TV-G :  
General Audience  
• TV-PG :  
• TV-14 :  
• TV-MA :  
Parental Guidance suggested  
Unsuitable for children under 14  
Mature audience only  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
6 Set "BLOCK" or "VIEW".  
5 Set "MPAA RATING".  
X
K L  
• Press [VOL ] and set to "BLOCK" or "VIEW"  
• Using the [CH / ], select the rating.  
for the rating without sub categories.  
G
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
PG  
PG-13  
R
NC-17  
X
TV-Y  
TV-Y7  
TV-G  
[VIEW]  
[VIEW]  
[BLOCK]  
(
)
TV-PG (DLSV) [BLOCK]  
TV-14 (DLSV) [BLOCK]  
TV-MA ( LSV) [BLOCK]  
<Selection>  
• G :  
• PG :  
• PG-13 :  
• R :  
<Rating Category Explanations>  
General Audience  
• For the rating with sub categories, they are dis-  
X
played by pressing [VOL ] twice.  
Parental Guidance suggested  
Unsuitable for children under 13  
Restricted; under 17 requires  
accompanying parent or adult  
guardian  
K L  
Press [CH / ] and select the rating. Then press  
X
[VOL ] and set to "BLOCK" or "VIEW".  
TV-Y  
TV-Y7  
TV-G  
TV-PG (  
TV-14  
TV-MA (  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
TV-PG  
[BLOCK]  
(
)
D
L
S
V
[BLOCK]  
[BLOCK]  
[BLOCK]  
[BLOCK]  
• NC-17 :  
• X :  
No one under 17 admitted  
Mature audience only  
)
)
)
(
6 Set "BLOCK" or "VIEW".  
Sub categories  
X
• Press [VOL ] and set to "BLOCK" or "VIEW".  
<Selection>  
• TV-Y7  
FV :  
<Rating Category Explanations>  
G
[VIEW]  
[VIEW]  
[VIEW]  
[BLOCK]  
[BLOCK]  
[BLOCK]  
PG  
PG-13  
R
NC-17  
X
Fantasy Violence  
• TV-PG / TV-14 / TV-MA :  
D :  
Suggestive Dialogue  
(TV-PG, TV-14 only)  
Coarse Language  
Sexual Situation  
Violence  
L :  
S :  
V :  
7 To exit the menu, press [MENU].  
NOTES:  
• You cannot access the setup menu when the "PROTECTED  
PROGRAM by ..." message appears. You need to move to  
an unblocked channel to access the setup menu.  
NOTES:  
• You cannot access the setup menu when the "PROTECTED  
PROGRAM by ..." message appears. You need to move to  
an unblocked channel to access the setup menu.  
• When you select a rating and set it to "BLOCK", the higher  
ratings will be blocked automatically. The lower ratings will  
be available for viewing.  
• When you select a rating and set it to "BLOCK", the higher  
ratings will be blocked automatically. The lower ratings will  
be available for viewing.  
• When you set "X" to [VIEW], all ratings turn to [VIEW] auto-  
matically .  
• When you set TV-MA to "VIEW", all ratings turn to "VIEW"  
automatically .  
7 To exit the menu, press [MENU].  
B
MPAA RATING  
4 Display the "MPAA RATING" screen.  
K L  
• Using [CH / ], select "MPAA RATING".  
X
• Press [VOL ].  
TV RATING  
MPAA RATING  
CHANGE CODE  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
C
CHANGE CODE  
4 Display the "CHANGE CODE" screen.  
K L  
• Using [CH / ], select "CHANGE CODE".  
TV RATING  
MPAA RATING  
CHANGE CODE  
X
• Press [VOL ].  
5 Change the access code.  
• Use [the Number buttons] on the remote con-  
trol and enter the NEW CODE (4-digit).  
• Enter code again in CONFIRM CODE space.  
NEW CODE  
_ _ _ _  
CONFIRM CODE  
_ _ _ _  
6 To exit the menu, press [MENU].  
NOTES:  
• Make sure to enter the exact same new code in the  
"CONFIRM CODE" space as one in the "NEW CODE"  
space. If they are different, the "NEW CODE" space is  
cleared for reentering.  
• Your personal access code will be erased and return to the  
default (0000) when a power failure occurs or when you turn  
off the power using a wall switch. If you forget the code,  
unplug the power cord for 10 seconds to restore the access  
code to 0000.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
CHANGING THE SCREEN DISPLAY MODE  
3 Select the display mode.  
2 types of display modes can be selected in the digi-  
tal mode.  
X Y  
• Every time you press [VOL / ],  
"LETTERBOX" and "ZOOM" will be switched  
alternately.  
You can select your favorite display mode and enjoy  
the program.  
D10-0  
D10-0  
1
4
2
5
8
0
3
6
9
7
/ENT  
CHANNEL  
RECALL  
–
+
100  
LETTERBOX  
ZOOM  
K L  
/
CH  
CH  
CH  
VOL  
VOL  
[LETTERBOX]  
X Y  
/
VOL  
Display the digital-supported program in full-  
screen.  
MENU  
INPUT  
MENU  
SLEEP  
MUTE  
SELECT  
Black borders will spread in the upper and  
lower screen.  
DTV  
[ZOOM]  
Enlarge and display the center area of the digital-  
supported program.  
1 Display the menu screen.  
• Press [MENU].  
The following menu screen is displayed.  
The right and left side of image will be cut off.  
4 To exit the menu, press [MENU].  
PICTURE  
CHANNEL SET  
[ENG]/ESP/FRA  
V-CHIP SET UP  
CAPTION [OFF]  
DTV SET UP  
NOTE:  
You may not switch the display mode depending on the pro-  
gram.  
2 Select "DTV SET UP".  
K L  
• Using [CH / ], select "DTV SET UP".  
PICTURE  
CHANNEL SET  
[ENG]/ESP/FRA  
V-CHIP SET UP  
CAPTION [OFF]  
DTV SET UP  
X
• When you press [VOL ], the menu screen will  
be displayed as below.  
DTV DISPLAY [LETTERBOX]  
DTVCC  
D.S.T.(Daylight Saving)  
TIME ZONE  
[ON]  
[ALASKA]  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
THER SETTINGS  
O
AUTO PRESET CH  
4 For TV channels  
If you switch wires (e.g. between antenna and  
CATV) or if you move the TV to a different area  
after the initial setting, or if you need to add the  
DTV channel you deleted, you will need to perform  
AUTO PRESET CH again. This function lets you  
K L  
• Using [CH / ], select  
"AUTO PRESET CH(TV)".  
ADD/DELETE  
AUTO PRESET CH(TV)  
AUTO PRESET CH(CATV)  
AUTO PRESET CH(TV/DTV)  
AUTO PRESET CH(CATV)  
! CATV takes approx. 50min.  
K L  
easily select the receivable channels with [CH / ]  
and the TV memorizes them even if you switch  
wires.  
DTV TV  
/
POWER  
DTV/TV  
X
• Press [VOL ].  
AUDIO  
INFO  
Scanning and memorizing the channels auto-  
matically starts.  
1
4
7
2
5
8
0
3
6
9
37  
CHANNEL  
RECALL  
–
/ENT  
+
100  
K L  
/
CH  
AUTO PRESET CH(TV)  
CH  
CH  
VOL  
VOL  
X
VOL  
MENU  
INPUT  
MENU  
SLEEP  
MUTE  
SELECT  
• When the scanning and memorizing are com-  
pleted, the lowest memorized channel in the  
analog broadcasting will be displayed.  
NOTE:  
• Make sure if the TV is connected to antenna or cable.  
When aerial antenna is connected, select “AUTO PRE-  
SET CH (TV)” or “ AUTO PRESET CH (TV/DTV)” at step 4.  
When connected to CATV, select “AUTO PRESET CH  
(CATV)”.  
4 For CATV channels  
K L  
• Using [CH / ], select "AUTO PRESET  
CH(CATV)".  
TV  
ADD/DELETE  
AUTO PRESET CH(TV)  
AUTO PRESET CH(CATV)  
AUTO PRESET CH(TV/DTV)  
AUTO PRESET CH(CATV)  
! CATV takes approx. 50min.  
When scanning TV or CATV  
1 Select analog mode by pressing [DTV/TV].  
2 Display the menu screen.  
• Press [MENU].  
The following menu screen is displayed.  
X
• Press [VOL ].  
Scanning and memorizing the channels auto-  
matically starts.  
PICTURE  
CHANNEL SET  
[ENG]/ESP/FRA  
V-CHIP SET UP  
CAPTION [OFF]  
37  
AUTO PRESET CH(CATV)  
3 Select "CHANNEL SET".  
• When the scanning and memorizing are com-  
pleted, the smallest memorized channel in the  
CATV will be displayed.  
K L  
• Using [CH / ], select "CHANNEL SET".  
PICTURE  
CHANNEL SET  
[ENG]/ESP/FRA  
V-CHIP SET UP  
CAPTION [OFF]  
X
• Press [VOL ].  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
DTV  
DTV  
TV  
When scanning both TV and DTV at the same time  
* You can access this menu from both modes  
(analog / digital).  
When scanning DTV  
1 Select digital mode by pressing [DTV/TV].  
2 Display the menu screen.  
1 Display the menu screen and select  
"CHANNEL SET".  
• Press [MENU].  
The following menu screen is displayed.  
• Press [MENU] and select "CHANNEL SET"  
using [CH / ].  
K L  
PICTURE  
CHANNEL SET  
[ENG]/ESP/FRA  
V-CHIP SET UP  
CAPTION [OFF]  
DTV SET UP  
PICTURE  
CHANNEL SET  
[ENG]/ESP/FRA  
V-CHIP SET UP  
CAPTION [OFF]  
DTV SET UP  
3 Select "CHANNEL SET".  
X
• Press [VOL ].  
K L  
• Using [CH / ], select "CHANNEL SET".  
K L  
2 Using [CH / ], select "AUTO PRESET  
PICTURE  
CH(TV/DTV)".  
CHANNEL SET  
[ENG]/ESP/FRA  
V-CHIP SET UP  
CAPTION [OFF]  
DTV SET UP  
ADD/DELETE(DTV)  
AUTO PRESET CH(DTV)  
AUTO PRESET CH(TV/DTV)  
AUTO PRESET CH(CATV)  
! CATV takes approx. 50min.  
X
• Press [VOL ].  
K L  
4 Using [CH / ], select "AUTO PRESET  
X
• Press [VOL ].  
CH(DTV)".  
Scanning and memorizing the channels auto-  
matically starts.  
ADD/DELETE(DTV)  
AUTO PRESET CH(DTV)  
AUTO PRESET CH(TV/DTV)  
AUTO PRESET CH(CATV)  
! CATV takes approx. 50min.  
53  
AUTO PRESET CH(TV/DTV)  
X
• Press [VOL ].  
Scanning and memorizing the channels auto-  
matically starts.  
• When the scanning and memorizing are com-  
pleted, the memorized smallest channel in the  
analog broadcasting will be displayed. If no  
analog channel is memorized, the smallest  
memorized channel in the digital broadcasting  
will be displayed.  
D28  
AUTO PRESET CH(DTV)  
NOTES:  
• If you press [POWER] or [MENU] while setting AUTO PRE-  
SET CH, AUTO PRESET CH setting will be canceled.  
• When the scanning and memorizing are com-  
pleted, the smallest memorized channel in the  
digital broadcasting will be displayed.  
• If there is no TV signal input, "NO TV SIGNALS" will appear  
on the display after the completion of channel scanning.  
NO TV SIGNALS  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
CHANNEL ADD/DELETE  
4 Select "ADD/DELETE".  
The CHANNEL ADD/DELETE function lets you add  
the channel that was not added by the AUTO PRE-  
SET CH function due to the bad reception status at  
the initial setting. You can also delete the unneces-  
sary channels.  
K L  
• Using [CH / ], select "ADD/DELETE".  
ADD/DELETE  
AUTO PRESET CH(TV)  
AUTO PRESET CH(CATV)  
AUTO PRESET CH(TV/DTV)  
AUTO PRESET CH(CATV)  
! CATV takes approx. 50min.  
DTV TV  
/
POWER  
DTV/TV  
AUDIO  
INFO  
1
4
7
2
5
8
0
3
6
9
X
• Press [VOL ].  
Number  
buttons  
5 Select the channel you want to add or delete.  
CHANNEL  
RECALL  
—
/ENT  
+
100  
K L  
• Using [CH / ] or [the Number buttons],  
K L  
/
CH  
select the channel.  
CH  
CH  
VOL  
VOL  
X Y  
/
15  
VOL  
MENU  
INPUT  
MENU  
SLEEP  
MUTE  
SELECT  
ADD/DELETE:TV  
TV  
1 Select analog mode by pressing [DTV/TV].  
2 Display the menu screen.  
X Y  
• Select "ADD" or "DELETE" with [VOL / ].  
NOTE:  
• Color of channel number displayed at the right top of  
the screen;  
• Press [MENU].  
The following menu screen is displayed.  
-Blue/Green:The selected channel will be added.  
-Pink/Red:The selected channel will be deleted.  
PICTURE  
CHANNEL SET  
[ENG]/ESP/FRA  
V-CHIP SET UP  
CAPTION [OFF]  
6 To exit the menu, press [MENU].  
DTV  
3 Select "CHANNEL SET".  
1 Select digital mode by pressing [DTV/TV].  
2 Display the menu screen.  
K L  
• Using [CH / ], select "CHANNEL SET".  
• Press [MENU].  
The following menu screen is displayed.  
PICTURE  
CHANNEL SET  
[ENG]/ESP/FRA  
V-CHIP SET UP  
CAPTION [OFF]  
PICTURE  
CHANNEL SET  
[ENG]/ESP/FRA  
V-CHIP SET UP  
CAPTION [OFF]  
DTV SET UP  
X
• Press [VOL ].  
The following CHANNEL SET screen is dis-  
played.  
3 Select "CHANNEL SET".  
ADD/DELETE  
AUTO PRESET CH(TV)  
AUTO PRESET CH(CATV)  
AUTO PRESET CH(TV/DTV)  
AUTO PRESET CH(CATV)  
! CATV takes approx. 50min.  
K L  
• Using [CH / ], select "CHANNEL SET".  
PICTURE  
CHANNEL SET  
[ENG]/ESP/FRA  
V-CHIP SET UP  
CAPTION [OFF]  
DTV SET UP  
X
• Press [VOL ].  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
LANGUAGE SELECTION  
4 Select "ADD/DELETE(DTV)".  
You can change the language used on the menu  
screen. ENGLISH, SPANISH or FRENCH can be  
selected.  
K L  
• Using [CH / ], select "ADD/DELETE(DTV)".  
ADD/DELETE(DTV)  
AUTO PRESET CH(DTV)  
AUTO PRESET CH(TV/DTV)  
AUTO PRESET CH(CATV)  
! CATV takes approx. 50min.  
How to change the language in the menu screen  
shown below.  
4
5
8
0
6
9
7
/ENT  
CHANNEL  
RECALL  
–
+
100  
X
• Press [VOL ].  
K L  
/
CH  
CH  
CH  
VOL  
VOL  
5 Select the channel you want to add or delete.  
X Y  
/
VOL  
K L  
• Using [CH / ] or [the Number buttons],  
select the channel.  
MENU  
INPUT  
MENU  
SLEEP  
MUTE  
SELECT  
D12  
1 Display the menu screen.  
• Press [MENU].  
ADD/DELETE:DTV  
The following menu screen is displayed.  
X Y  
• Select "ADD" or "DELETE" with [VOL / ].  
PICTURE  
CHANNEL SET  
[ENG]/ESP/FRA  
V-CHIP SET UP  
CAPTION [OFF]  
DTV SET UP  
NOTE:  
• Color of channel number displayed at the right top of  
the screen;  
-Blue/Green:The selected channel will be added.  
-Pink/Red:The selected channel will be deleted.  
2 Select "[ENG]/ESP/FRA".  
6 To exit the menu, press [MENU].  
K L  
• Using [CH / ], select "[ENG]/ESP/FRA".  
NOTES:  
• The menu will disappear automatically after about 10 sec-  
onds.  
PICTURE  
CHANNEL SET  
[ENG]/ESP/FRA  
V-CHIP SET UP  
CAPTION [OFF]  
DTV SET UP  
• In the digital mode (DTV), you can add or delete channels  
only for Major channel.  
• Once you delete a DTV channel, you cannot add the chan-  
nel again without performing AUTO PRESET CH again.  
(Refer to "AUTO PRESET CH" on page 28.)  
X Y  
• Every time you press [VOL / ], the language  
will be switched as below. Select the language.  
3 To exit the menu, press [MENU].  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
D.S.T.  
3 Select "D.S.T. (Daylight Saving)".  
K L  
After the initial setting you set when you first turned  
on the power, you can set the D.S.T. (Daylight  
Saving Time) again. When you set this function to  
ON, the clock will automatically move forward one  
hour at 2:00 a.m. on the first Sunday in April and  
move back one hour at 2:00 a.m. on the last  
Sunday in October.  
• Using [CH / ], select "D.S.T. (Daylight Saving)".  
DTV DISPLAY [LETTERBOX]  
DTVCC  
D.S.T.(Daylight Saving) [OFF]  
TIME ZONE  
[ALASKA]  
1
4
2
5
8
0
3
6
9
4 Set "D.S.T. (Daylight Saving)".  
7
/ENT  
X Y  
• Using [VOL / ], set to "ON" or "OFF".  
CHANNEL  
RECALL  
–
+
100  
K L  
/
CH  
DTV DISPLAY [LETTERBOX]  
DTVCC  
D.S.T.(Daylight Saving) [ON]  
CH  
CH  
VOL  
VOL  
TIME ZONE  
[ALASKA]  
X Y  
/
VOL  
MENU  
INPUT  
MENU  
SLEEP  
MUTE  
SELECT  
DTV  
5 To exit the menu, press [MENU].  
NOTE:  
1 Display the menu screen.  
• Press [MENU].  
When you set D.S.T. to "OFF", the date and time information  
adjusted for the area set by "TIME ZONE" is displayed.  
The following menu screen is displayed.  
PICTURE  
CHANNEL SET  
[ENG]/ESP/FRA  
V-CHIP SET UP  
CAPTION [OFF]  
DTV SET UP  
2 Select "DTV SET UP".  
K L  
• Using [CH / ], select "DTV SET UP".  
PICTURE  
CHANNEL SET  
[ENG]/ESP/FRA  
V-CHIP SET UP  
CAPTION [OFF]  
DTV SET UP  
X
• When you press [VOL ], the following menu  
screen will be displayed.  
DTV DISPLAY [LETTERBOX]  
DTVCC  
D.S.T.(Daylight Saving) [OFF]  
TIME ZONE  
[ALASKA]  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
TIME ZONE  
3 Select "TIME ZONE".  
If you move the TV to a different area after the ini-  
tial setting you set when you first turned on the  
power, you can set the area again.  
K L  
• Using [CH / ], select "TIME ZONE".  
DTV DISPLAY [LETTERBOX]  
DTVCC  
D.S.T.(Daylight Saving) [ON]  
1
4
2
5
8
0
3
6
9
TIME ZONE  
[ALASKA]  
7
/ENT  
CHANNEL  
RECALL  
–
+
100  
K L  
/
CH  
CH  
CH  
VOL  
VOL  
4 Select your "TIME ZONE".  
X Y  
/
X Y  
VOL  
• When you use [VOL / ], the TIME ZONE will  
MENU  
INPUT  
MENU  
SLEEP  
MUTE  
SELECT  
be switched as below.  
1 Display the menu screen.  
• Press [MENU].  
The following menu screen is displayed.  
PICTURE  
CHANNEL SET  
[ENG]/ESP/FRA  
V-CHIP SET UP  
CAPTION [OFF]  
DTV SET UP  
2 Select "DTV SET UP".  
K L  
• Using [CH / ], select "DTV SET UP".  
• Based on the world standard time information  
acquired from digital broadcasting, the time dif-  
ference will be adjusted as below.  
PICTURE  
CHANNEL SET  
[ENG]/ESP/FRA  
V-CHIP SET UP  
CAPTION [OFF]  
DTV SET UP  
ALASKA  
-9 hours  
-10 hours  
-8 hours  
-7 hours  
-6 hours  
-5 hours  
-4 hours  
HAWAII  
PACIFIC  
X
• When you press [VOL ], the following menu  
screen is displayed.  
MOUNTAIN  
CENTRAL  
EASTERN  
ATLANTIC  
DTV DISPLAY [LETTERBOX]  
DTVCC  
D.S.T.(Daylight Saving) [ON]  
TIME ZONE  
[ALASKA]  
5 To exit the menu, press [MENU].  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
ISCELLANEOUS  
M
TROUBLESHOOTING GUIDE  
Before calling for service, check the following chart again.  
Symptom  
No power  
Remedy  
• Be sure the Power cord is connected to outlet.  
• If a power failure occurs, unplug the power cord for 30  
minutes to allow the unit to reset itself.  
No picture or sound  
• Check if the power is on.  
• Check the outlet connection.  
• Check the antenna or cable connection to the main unit.  
• When the outside antenna is used, check the wire condi-  
tion and connection.  
• Try to view other channels. It may be the problem on the  
broadcasting station.  
• Turn off the power and wait for about 1 minute, then turn  
it on again.  
No color  
• Check the antenna or cable connection to the main unit.  
• When the outside antenna is used, check the wire condi-  
tion and connection.  
• Try to view other channels. It may be the problem on the  
broadcasting station.  
• Adjust the COLOR in the MENU screen.  
Sound OK, picture poor  
• Check the antenna or cable connection to the main unit.  
• When the outside antenna is used, check the wire condi-  
tion and connection.  
• Electric waves may be interfered due to the electric appli-  
ances, etc. nearby.  
• Adjust CONTRAST and BRIGHT in the MENU screen.  
• Try to view other channels. It may be the problem on the  
broadcasting station.  
Picture distorted  
Weak picture  
• When the outside antenna is used, check the wire condi-  
tion and connection.  
• Try to view other channels. It may be the problem on the  
broadcasting station.  
• Check the antenna or cable connection to the main unit.  
• When the outside antenna is used, check the wire condi-  
tion and connection.  
• Adjust CONTRAST and BRIGHT in the MENU screen.  
• Try to view other channels. It may be the problem on the  
broadcasting station.  
Lines or streaks in picture  
• When the outside antenna is used, check the wire condi-  
tion and connection.  
• Electric waves may be interfered due to the electric appli-  
ances, etc. nearby.  
• Try to view other channels. It may be the problem on the  
broadcasting station.  
Picture blurred  
• When the outside antenna is used, check the wire condi-  
tion and connection.  
• Try to view other channels. It may be the problem on the  
broadcasting station.  
Ghosts in picture  
• Check the antenna or cable connection to the main unit.  
• When the outside antenna is used, check the wire condi-  
tion and connection.  
• Electric waves may be interfered due to the electric appli-  
ances, etc. nearby.  
• Try to view other channels. It may be the problem on the  
broadcasting station.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
Symptom  
Bars on screen  
Remedy  
• When the outside antenna is used, check the wire condi-  
tion and connection.  
• Electric waves may be interfered due to the electric appli-  
ances, etc. nearby.  
Picture rolls vertically  
• When the outside antenna is used, check the wire condi-  
tion and connection.  
• Electric waves may be interfered due to the electric appli-  
ances, etc. nearby.  
• Try to view other channels. It may be the problem on the  
broadcasting station.  
Different color marks on screen  
Poor reception on some channels  
• Move the TV apart from electric appliances nearby. Turn  
off the power and wait for about 30 minutes, then turn it  
on again.  
• Try to view other channels. It may be the problem on the  
broadcasting station.  
• Check the antenna or cable connection to the main unit.  
• When the outside antenna is used, check the wire condi-  
tion and connection.  
• Electric waves may be interfered due to the electric appli-  
ances, etc. nearby.  
• Try to view other channels. It may be the problem on the  
broadcasting station.  
Picture OK, sound poor  
• Electric waves may be interfered due to the electric appli-  
ances, etc. nearby.  
• Try to view other channels. It may be the problem on the  
broadcasting station.  
Remote control doesn’t work  
• Check the antenna or cable connection to the main unit.  
• Check the battery life of the remote control.  
• Check if there is an obstacle between the sensor and the  
remote control.  
• Test the signal output. If OK, then possible remote sensor  
trouble. (Refer to “IR SIGNAL CHECK” on page 36.)  
Problems on Closed Caption  
Misspelled captions are displayed.  
• Closed captioning production companies may broadcast  
programs without correcting the misspelling in a live  
broadcast.  
Captions are not entirely displayed, or  
captions are delayed behind the dia-  
logue.  
•
Captions that are delayed a few seconds behind the actual  
dialogue are common for live broadcasts. Most captioning  
production companies can display a dialogue to a maximum  
of 220 words per minute. If a dialogue exceeds that rate,  
selective editing is used to insure that the captions remain  
up-to-date with the current TV screen dialogue.  
Captions are displayed as a white box. • When electric waves are interfered due to buildings,  
No caption is displayed in the Closed  
Caption-supported program.  
weather conditions etc., incomplete captions may be dis-  
played.  
• Broadcasting station may shorten the program to insert  
the advertisement. The closed caption decoder cannot  
read the information of the shortened program.  
No caption is displayed when playing  
the videotape containing captions.  
• The videotape may be illegally copied, or the caption sig-  
nal may fail to be read while copying.  
Black box is displayed in the screen.  
• “TEXT” mode is selected for caption. Select “C1”, “C2” or  
“OFF”.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
GLOSSARY  
ATSC  
Letterbox  
SAP  
(Secondary Audio Program)  
Acronym that stands for Advanced Letterbox refers to the format dis-  
Television Systems Committee  
and the name of the digital broad-  
casting standards.  
playing a wide-screen picture on a Second-audio channel delivered  
standard 4:3 aspect ratio televi-  
sion screen with black bars above  
and below. It is used to maintain  
the aspect ratio of the original  
source such as a motion picture  
(16:9 or wider).  
separately from main-audio chan-  
nel. This audio channel is used as  
an alternate in bilingual broad-  
casting.  
High Definition TV (HDTV)  
Ultimate digital format that pro-  
duces high resolution and high  
picture quality.  
Standard Definition TV (SDTV)  
Standard digital format that is sim-  
ilar to the NTSC picture quality.  
NTSC  
Acronym that stands for National  
Television Systems Committee  
and the name of the current ana-  
log broadcasting standards.  
S-Video output  
It delivers independently each sig-  
nal of color(C) and luminance (Y)  
to TV as video signals, so that  
higher-quality picture will be  
gained.  
MAINTENANCE  
When you plug in the unit again, the degaussing cir-  
cuit will operate to clear errors. Take this step any  
time the TV screen is accidentally magnetized or  
when you move the unit.  
CABINET CLEANING  
• Wipe the front panel and other exterior surfaces of  
the TV with a soft cloth immersed in lukewarm  
water and wrung dry.  
• Never use a solvent or alcohol. Do not spray insec-  
ticide liquid near the TV. Such chemicals may  
cause damage and discoloration to the exposed  
surfaces.  
IR SIGNAL CHECK  
If the remote control doesn’t work properly, you can  
test if the remote control sends out the infrared sig-  
nal with AM radio or a digital camera (including built-  
in camera of cellular phone). It will help to define the  
cause of malfunction.  
PICTURE TUBE CLEANING  
Wipe the picture tube of the TV with a soft cloth.  
Before cleaning the picture tube, disconnect the  
power cord.  
• With an AM radio:  
Tune an AM radio to a station  
with no broadcasting. Press a  
button on remote control toward  
the radio. Sound will be fluttering  
when you press any key and the  
radio receives the signal. This  
means the remote control unit is  
working.  
SERVICING  
Should your unit become inoperative, do not try to  
correct the problem by yourself. There are no  
userserviceable parts inside. Turn off, unplug the  
power cord and please call our help line mentioned  
on the front page, to locate an Authorized Service  
Center.  
• With a digital camera (including  
built-in camera of cellular phone):  
Direct a digital camera to remote con-  
trol, press and hold a button on  
remote control. If infrared light  
appears through digital camera, the  
remote control is working.  
DEGAUSSING  
A degaussing circuit in this unit clears up color  
errors on the TV screen. Color errors occur when  
there is any excess magnetism close to the unit.  
This circuit is designed to operate once when the  
unit is first plugged in.  
If you see minor color errors on the screen,  
unplug the unit for approximately 30 minutes.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
PECIFICATIONS  
S
GENERAL SPECIFICATIONS  
ELECTRICAL SPECIFICATIONS  
Television system:  
ATSC  
Sound output:  
2W, 8 ohm x 2  
NTSC-M  
TV Standard  
Closed Caption  
System:  
OTHER SPECIFICATIONS  
§15.119/FCC (Analog CC)  
§15.122/FCC (Digital CC)  
Remote control:  
Digital encoded  
infrared light system  
Channel coverage  
VHF:  
Operating  
2 ~ 13  
14 ~ 69  
2 ~ 69  
temperature:  
5°C to 40°C  
UHF:  
DTV:  
CATV:  
(41°F to 104°F)  
AC120V, 60Hz  
Power requirements:  
Power consumption  
(Maximum):  
2 ~ 13, A ~ W,  
W+1 ~ W+84,  
A-5 ~ A-1, 5A  
Channel frequency  
synthesized tuning system  
Direct access keyboard,  
programmable  
scan and up/down  
140W  
32"  
Picture tube:  
Tuning System:  
Channel access:  
Dimensions:  
H : 26.2"  
W: 33.4"  
D : 21.3"  
(665mm)  
(849mm)  
(540mm)  
Weight:  
112.6 lbs. (51.0kg)  
Terminals  
Antenna input:  
VHF/UHF/DTV/CATV  
75 ohm unbalanced  
(F-type)  
S-Video input:  
Video input:  
Mini DIN 4-pin jack  
RCA connector x 2  
(1 x Front / 1 x Rear)  
RCA connector x 4  
Audio input:  
(2 (L/R) x Front / 2 (L/R) x Rear)  
Coaxial digital audio output:  
One pin jack, 500mVpp (75 ohm)  
Component Video/Audio input  
One pin jack (Y) / 1Vpp (75 ohm)  
Two pin jacks (Cb/Cr) / 700mVpp (75 ohm)  
RCA connector x 2 (L/R)  
Stereo Sound System  
2 speakers  
• Designs and specifications are subject to change without notice and without our legal obligation.  
• If there is a discrepancy between languages, the default language will be English.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
LIMITED WARRANTY  
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows:  
DURATION:  
PARTS:  
LABOR:  
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the  
date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this  
warranty.  
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of  
original retail purchase.  
LIMITS AND EXCLUSIONS:  
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR  
OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO  
OBTAIN SERVICE UNDER THIS WARRANTY.  
This warranty shall not be extended to any other person or transferee.  
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or  
if service was attempted by an unauthorized service center. This limited warranty does not apply to any product not  
purchased and used in the United States.  
This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does  
not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not sup-  
plied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication, alter-  
ation, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product or  
damage which results from fire, flood, lightning or other acts of God.  
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CON-  
TROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.  
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL,  
INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE  
INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES,  
EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES  
INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE  
HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES.  
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.  
THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.  
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO  
PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIRS COSTS WILL  
BE CHARGED.  
IMPORTANT:  
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM  
STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION  
WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.  
ATTENTION:  
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT  
WITHOUT PRIOR NOTICE.  
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:  
To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original packaging  
or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI CORP. will not  
reimburse you for any service done by unauthorized service providers without prior written approval.  
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries,  
please contact us at :  
FUNAI CORPORATION  
Customer Service  
Tel :1-800-474-0045  
http://www.funai-corp.com  
19900 Van Ness Avenue, Torrance, CA 90501  
Printed in Malaysia  
L4908UJ  
1EMN22170 ★★★★★  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Eureka Vacuum Cleaner 100 110 User Manual
EverFocus Security Camera EDN850H User Manual
Everpure Water System EV9324 22 User Manual
Excalibur electronic Games ET454 User Manual
Extron electronic Stereo System MBD 123 1U User Manual
Fisher Price Video Games N8242 0920G1 User Manual
FujiFilm Digital Camera 16243252 User Manual
Gateway Personal Computer GT5448E User Manual
GE Monogram Ventilation Hood ZV830SM User Manual
Generac Switch 6378 User Manual